Preparation of steel substrates before application of paints and related products. Collected information on the effect of levels of water-soluble salt contamination

2001 ◽  

2020 ◽  
pp. 1-31
Author(s):  
Geoffrey P. Schortgen ◽  
Aaron J. Patton

The herbicide 2,4-D is used in a variety of cropping systems, especially in grasses since it is a selective postemergence broadleaf herbicide. However, the most common formulation (2,4-D dimethylamine) is antagonized when mixed in hard water. The objective of this research was to determine which formulations of 2,4-D or premixes of various formulations of synthetic auxin herbicides are subject to hard water antagonism. Formulations surveyed for hard water antagonism in the first experiment included 2,4-D dimethylamine, 2,4-D diethanolamine, 2,4-D monomethylamine, 2,4-D isopropylamine salt, 2,4-D choline salt, 2,4-D isooctyl ester, and 2,4-D ethylhexyl ester. Synthetic auxin formulation types in the second experiment included water-soluble, emulsifiable concentrates and emulsion-in-water. All formulations were mixed with both soft and hard water (600 mg CaCO3 L-1) and applied to dandelions to determine if antagonism occurred in hard water. Water-soluble (amine and choline) 2,4-D formulations were antagonized by hard water, but water-insoluble (ester) 2,4-D formulations were not antagonized. Similar results were found by formulation type with water-soluble synthetic auxin premixes antagonized but emulsifiable concentrates not antagonized. Further, water-soluble salt formulations were not antagonized when formulated in premixes with other synthetic auxin herbicides as an emulsion-in-water. This research demonstrates that all 2,4-D water-soluble formulations and water-soluble premixes with phenoxycarboxylic acid herbicides are subject to hard water antagonism. Formulations of 2,4-D containing emulsifying agents protect against antagonism by the water-insoluble nature of ingredients in their formulation.





ACS Omega ◽  
2018 ◽  
Vol 3 (7) ◽  
pp. 8365-8377 ◽  
Author(s):  
Vikas Kumar ◽  
Sandip B. Bharate ◽  
Ram A. Vishwakarma ◽  
Sonali S. Bharate


2016 ◽  
Vol 70 (11) ◽  
Author(s):  
Kateřina Hrdá ◽  
Jakub Opršal ◽  
Petr Knotek ◽  
Miloslav Pouzar ◽  
Milan Vlček

AbstractToxicity of zinc oxide nanoparticle (ZnO-NPs) powder and water soluble salt of Zn (ZnCl



2021 ◽  
Author(s):  
Xiaolong Gong ◽  
Xinwang Liu ◽  
Zheng Chen ◽  
Zhiyuan Yang ◽  
Wenming Jiang ◽  
...  

Abstract Core materials with high strength and excellent collapsibility are important for the manufacture of hollow composite structure castings. In this work, a novel technology to fabricate water-soluble Na2SO4-NaCl based salt cores with high strength and low cost by layered extrusion forming (LEF) was reported. The water-soluble Na2SO4 and NaCl powder were used as the matrix materials, and the bauxite powder was used as the reinforcing material. The effects of bauxite powder content and liquid phase sintering parameters on properties of the salt cores were studied. The results show that the salt-based slurry exhibits shear thinning property within the studied bauxite powder contents. When the content of bauxite powder was 20 wt.% and the sintering was at 630 ℃/30 min, the obtained salt cores show an optimal comprehensive performance, with the bending strength, linear shrinkage, water-solubility rate and moisture rate of 24.43 MPa, 6.3%, 207.6 (g/min·m2), and 0.29%, respectively. The complex water-soluble salt core samples prepared under the optimal parameters display high-strength and well-shaped morphology.



PeerJ ◽  
2019 ◽  
Vol 7 ◽  
pp. e6310 ◽  
Author(s):  
Haifeng Wang ◽  
Yinwen Chen ◽  
Zhitao Zhang ◽  
Haorui Chen ◽  
Xianwen Li ◽  
...  

Soil salinization is the primary obstacle to the sustainable development of agriculture and eco-environment in arid regions. The accurate inversion of the major water-soluble salt ions in the soil using visible-near infrared (VIS-NIR) spectroscopy technique can enhance the effectiveness of saline soil management. However, the accuracy of spectral models of soil salt ions turns out to be affected by high dimensionality and noise information of spectral data. This study aims to improve the model accuracy by optimizing the spectral models based on the exploration of the sensitive spectral intervals of different salt ions. To this end, 120 soil samples were collected from Shahaoqu Irrigation Area in Inner Mongolia, China. After determining the raw reflectance spectrum and content of salt ions in the lab, the spectral data were pre-treated by standard normal variable (SNV). Subsequently the sensitive spectral intervals of each ion were selected using methods of gray correlation (GC), stepwise regression (SR) and variable importance in projection (VIP). Finally, the performance of both models of partial least squares regression (PLSR) and support vector regression (SVR) was investigated on the basis of the sensitive spectral intervals. The results indicated that the model accuracy based on the sensitive spectral intervals selected using different analytical methods turned out to be different: VIP was the highest, SR came next and GC was the lowest. The optimal inversion models of different ions were different. In general, both PLSR and SVR had achieved satisfactory model accuracy, but PLSR outperformed SVR in the forecasting effects. Great difference existed among the optimal inversion accuracy of different ions: the predicative accuracy of Ca2+, Na+, Cl−, Mg2+ and SO42− was very high, that of CO32− was high and K+ was relatively lower, but HCO3− failed to have any predicative power. These findings provide a new approach for the optimization of the spectral model of water-soluble salt ions and improvement of its predicative precision.



2020 ◽  
pp. 073490412096106
Author(s):  
Lars-Hendrik Daus ◽  
Bernhard Schartel ◽  
Volker Wachtendorf ◽  
Rolf Mangelsdorf ◽  
Manfred Korzen

A systematic approach was used to investigate the weathering-induced degradation of a common water–based intumescent coating. In this study, the coatings are intended for humid indoor applications on steel substrates. The coating contains ammonium polyphosphate, pentaerythritol, melamine, and polyvinyl acetate. By replacing each ingredient with a less water-soluble substance, the most vulnerable substances, polyvinyl acetate and pentaerythritol, were identified. Furthermore, the weathering resistance of the system was improved by exchanging the ingredients. The coatings were stressed by artificial weathering tests and evaluated by fire tests. Thermogravimetry and Fourier-transform infrared spectroscopy were used to study the thermal decomposition. This study lays the foundation for the development of a new generation of water-based intumescent coatings.





Sign in / Sign up

Export Citation Format

Share Document