scholarly journals The effect of plant density on maize yield in average and extremely dry years

2008 ◽  
pp. 7-16
Author(s):  
Beáta Boros ◽  
Mihály Sárvári
Keyword(s):  
Plant Density ◽  
Maximum Yield ◽  
Maize Yield ◽  
Vegetation Period ◽  
Fertilizer Treatment ◽  
Higher Plant ◽  
Experimental Conditions ◽  
Good Individual ◽  
The Relationship

The yield safety of maize has not been satisfactory in Hungary for decades. Yield is influenced by the combination of several factors.In recent years, the frequency of dry years increased and fertilization decreased. These factors call for a rational determination of the plant density.I studied the relationship between plant density and yield in 2003-2004 and 2007 on meadow soil. In 2003, the weather was dry. In the vegetation period, the amount of precipitation was 78.5 mm lower and the temperature was 0.97 °C higher than the average of 30 years, the number of hot days was 47-60 (days with a temperature higher than 30 °C). However, we obtained favourable results under experimental conditions in 2003 after wheat as a forecrop using the fertilizer Kemira Power. The weather in 2004 was favourable. In the vegetation period, the amount of precipitation was 93.2 mm higher than the average of 30 years.  Although, the distribution of the precipitation could have been more favourable. The yield of the hybrids ranged between 8.87-10.42 t/ha. Among the studied seven hybrids, the early hybrids gave the highest yield at the highest plant density of 90 thousand plants/ha (PR38Y09, PR38A67, PR37D25, PR37M34). However, FAO 400-500 hybrids gave favourable results also at the low plant density of 45 thousand plants/ha (8-9 t/ha). At this plant density, the aeration of the plant stock was better and the hybrids were prone to bringing several cobs. Yield stagnated with increasing plant density (60 thousand plants/ha), then at 75-90 thousand plants per ha, the yield started to increase again.In 2004 the yield of hybrids was considerably higher than in the previous year. In contrast to yields of 8.87-10.42 t/ha in 2003, yields in 2004 were around 9-12 t/ha.The yield of the hybrid XO 902 P is above 12 t/ha already at a plant density of 45 thousand plants/ha. It gives maximum yield at the plant density of 90 thousand plants/ha.The hybrid PR38P92 showed a good response to changing plant density, but its yield was only 9 t/ha at the low plant density value.In a favourable year, the yield of the hybrids PR38B85, PR37W05, PR37D25, PR37K85 at a plant density of 45 thousand plants/ha 11 t/ha, while at the higher plant density of 90 thousand plants/ha, it ranges around 13-15 t/ha. Hybrids PR36K20, PR35Y54, PR34H31 have a good individual yield and they are prone to bringing several cobs in favourable years at a low plant density. Their maximum yield at the plant density of 90 thousand plants/ha is almost 16 t/ha.In 2007, the weather was similar to that of the extremely dry year of 2003. The amount of precipitation in the vegetation period was 41.9 mm lower than the average of 30 years and its distribution was not favourable either.In the optimum NPK fertilizer treatment at an optimum plant density, the yield of hybrids ranged between 9.32-10.73 t/ha. The highest yields of 10.22-10.73 t/ha were measured for hybrids PR38A79 (FAO 300) and PR35F73 at a relatively low plant density of 60 thousand plants/ha.In the average of the hybrids, the optimum NPK dosage was N 131, P2O5 82, K2O 93 kg/ha active ingredient.

scholarly journals Optimizing Grain Yield and Water Use Efficiency Based on the Relationship between Leaf Area Index and Evapotranspiration

Agriculture ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 313
Author(s):  
Guoqiang Zhang ◽  
Bo Ming ◽  
Dongping Shen ◽  
Ruizhi Xie ◽  
Peng Hou ◽  
...  
Keyword(s):  
Grain Yield ◽  
Water Use Efficiency ◽  
Leaf Area Index ◽  
Water Use ◽  
Plant Density ◽  
Maize Yield ◽  
Area Index ◽  
Irrigation Level ◽  
Use Efficiency ◽  
The Relationship

Achieving optimal balance between maize yield and water use efficiency is an important challenge for irrigation maize production in arid areas. In this study, we conducted an experiment in Xinjiang China in 2016 and 2017 to quantify the response of maize yield and water use to plant density and irrigation schedules. The treatments included four irrigation levels: 360 (W1), 480 (W2), 600 (W3), and 720 mm (W4), and five plant densities: 7.5 (D1), 9.0 (D2), 10.5 (D3), 12.0 (D4), and 13.5 plants m−2 (D5). The results showed that increasing the plant density and the irrigation level could both significantly increase the leaf area index (LAI). However, LAI expansion significantly increased evapotranspiration (ETa) under irrigation. The combination of irrigation level 600 mm (W3) and plant density 12.0 plants m−2 (D4) produced the highest maize yield (21.0–21.2 t ha−1), ETa (784.1–797.8 mm), and water use efficiency (WUE) (2.64–2.70 kg m−3), with an LAI of 8.5–8.7 at the silking stage. The relationship between LAI and grain yield and evapotranspiration were quantified, and, based on this, the relationship between water use and maize productivity was analyzed. Moreover, the optimal LAI was established to determine the reasonable irrigation level and coordinate the relationship between the increase in grain yield and the decrease in water use efficiency.

scholarly journals Determination of leaf area coefficient in sunflower.

1977 ◽  
Vol 25 (4) ◽  
pp. 238-242
Author(s):  
A.S.R. Pereira
Keyword(s):  
Leaf Area ◽  
Yield Components ◽  
Plant Density ◽  
Photosynthetic Capacity ◽  
Leaf Position ◽  
Area Estimation ◽  
End Use ◽  
The Relationship

For studies on the relationship between photosynthetic capacity and yield components in sunflower a method for estimating leaf area was required. To this end use of the leaf area coefficient (LAC), i.e. the quotient area/(length X max. width), was evaluated. It was found that LAC may be a function of leaf position and plant density, depending on the cv. concerned. For the Russian cv. Armavirec, LAC was independent of leaf position and plant density. For the Rumanian hybrid HS 18, LAC was dependent on leaf position but not plant density. For the French hybrid INRA 4701, LAC depended on both leaf position and plant density, but even in this case, it was concluded that LAC can be a useful aid in leaf area estimation. (Abstract retrieved from CAB Abstracts by CABI’s permission)

scholarly journals A műtrágyázás és a csapadék változékonyságának hatása a kukorica (Zea mays L.) termésére

2005 ◽  
Vol 54 (3-4) ◽  
pp. 309-324 ◽  
Author(s):  
László Márton
Keyword(s):  
Grain Yield ◽  
Maximum Yield ◽  
Maize Yield ◽  
Vegetation Period ◽  
Positive Effects ◽  
Experimental Station ◽  
Natural Rainfall ◽  
Zn Content ◽  
Set Up

The effect of natural rainfall and N, P and K nutrients on the yield of maize was investigated in 16 years of a long-term fertilization experiment set up at the Experimental Station of the Institute in Nagyhörcsök. The soil was a calcareous chernozem, having the following characteristics: pH (KCl): 7.3, CaCO 3 : 5%, humus: 3%, clay: 20-22%, AL-soluble P 2 O 5 : 60-80, AL-soluble K 2 O: 180-200, KCl-soluble Mg: 150-180; KCl+ EDTA-soluble Mn, Cu and Zn content: 80-150, 2-3 and 1-2 mg·kg -1 . The experiment had a split-split-plot design with 20 treatments in 4 replications, giving a total of 80 plots. The treatments involved three levels each of N and P and two levels of K in all possible combinations (3×3×2=18), together with an untreated control and one treatment with a higher rate of NPK, not included in the factorial system. The main results can be summarized as follows: An analysis of the weather in the 16 experimental years revealed that there were no average years, as two years were moderately dry (1981, 1982), eight were very dry (1973, 1978, 1986, 1989, 1990, 1993, 1997, 2002) and six were very wet (1969, 1974, 1977, 1994, 1998, 2001). In dry years the N, NP and NK treatments led to a yield increment of over 3.0  t·ha -1 (3.2 t·ha -1 ) (81%) compared with the unfertilized control, while the full NPK treatment caused hardly any increase in the maize yield (7.2 t·ha -1 ). In the case of drought there was a 4.0% yield loss in the N, NP and NK treatments compared to the same treatments in the dry years. This loss was only 1.0% in the NPK treatment. In very wet years the positive effects of a favourable water supply could be seen even in the N, NP and NK treatments (with yields of around 7.4 t·ha -1 ). The yield increment in these treatments compared with the droughty years averaged 8%, while balanced NPK fertilization led to a further 2% increase (10%). Significant quadratic correlations were found between the rainfall quantity during the vegetation period and the yield, depending on the nutrient supplies (Ø: R = 0.7787***, N: R = 0.8997***, NP: R = 0.9338***, NK: R = 0.9574***, NPK: R = 0.8906***). The optimum rainfall quantity and the corresponding grain yield ranged from 328-349 mm and 5.0-7.7 t·ha -1 , respectively, depending on the fertilizer rate. The grain yield increment obtained per mm rainfall in the case of optimum rainfall supplies was found to be 14.3-23.2 kg·ha -1 , while the quantity of rainfall utilized during the vegetation period for the production of 1 kg air-dry matter in the case of maximum yield amounted to 698, 449, 480, 466 and 431 litres in the control, N, NP, NK and NPK treatments, respectively. It was clear from the 43-year meteorological database for the experimental station (1961-2003) that over the last 23 years (1981-2003) the weather has become substantially drier. Compared with the data for the previous 20 years (1961-1980) there was an increase of 20, 500 and 50% in the number of average, dry and droughty years, no change in the number of wet years and a 71% drop in the number of very wet years.

Yield-density relationships and optimum plant populations in two cultivars of solid-seeded dry bean (Phaseolus vulgaris L.) grown in Saskatchewan

2002 ◽  
Vol 82 (3) ◽  
pp. 521-529 ◽  
Author(s):  
Steven J. Shirtliffe ◽  
Adrian M. Johnston
Keyword(s):  
Seed Weight ◽  
Plant Density ◽  
Maximum Yield ◽  
Plant Population ◽  
Seeding Density ◽  
Seeding Rate ◽  
Higher Plant ◽  
Plant Populations ◽  
Dry Bean ◽  
Density Relationship

There is relatively little agronomic information on solid-seeded production of dry bean in western Canada. Recommended seeding density for dry bean can depend on the growth habit of the plant, the yield–density relationship, percent emergence, seed cost and environment. The objective of this study was to determine the yield–density relationships in two determinate bush type cultivars of dry bean and the optimum plant population under solid-seeded production in Saskatchewan. CDC Camino, a late-season pinto bean and CDC Expresso, a medium-season-length black bean were the cultivars evaluated. In most sites, the yield-density relationship of the cultivars was asymptotic and an optimum plant density for maximum yield could not be determined. Camino generally required a lower plant population to reach a given yield than Expresso. Increasing plant population did not affect 1000-seed weight. Higher seeding rate did result in a greater number of seeds produced m-2, with Expresso having a greater increase in seed produced m-2 compared with Camino. Expresso was required to be at higher plant densities than Camino to maximize economic returns. This reflects the differences between cultivars in yield-density relationship and seed cost, as Camino has a heavier 1000-seed weight than Expresso. Saskatchewan bean growers wishing to maximize profit should target plant populations for Expresso and Camino of approximately 50 and 25 plants m-2, respectively. Key words: Saskatchewan, yield components, non-linear regression, seeding rate, narrow rows, solid-seeded

scholarly journals Determining elements of variety-specific maize production technology

2010 ◽  
pp. 157-161
Author(s):  
Mihály Sárvári ◽  
Beáta Boros
Keyword(s):  
Crop Rotation ◽  
Plant Density ◽  
Interactive Effect ◽  
Clay Content ◽  
Vegetation Period ◽  
Yield Potential ◽  
Higher Plant ◽  
Sowing Time ◽  
Maize Production ◽  
Maize Hybrids

Our aim was to work out such new maize fertilizer methods and models which can reduce the harmful effects of fertilization, canmaintain the soil fertility and can moderate the yield fluctuation (nowadays 50-60 %).The soil of our experimental projects was meadow soil. The soil could be characterized by high clay content and pour phosphorus andmedium potassium contents. In the last decade, out of ten years six years were dry and hot in our region. So the importance of crop-rotationis increasing and we have to strive for using the appropriate crop rotation.The yields of maize in monoculture crop rotation decreased by 1-3 t ha-1 in each dry year during the experiment (1983, 1990, 1992,1993, 1994, 1995, 1998, 2000, 2003, and 2007). The most favourable forecrop of maize was wheat, medium was the biculture crop rotationand the worst crop rotation was the monoculture.There is a strong correlation between the sowing time and the yield of maize hybrids, but this interactive effect can be modified by theamount and distribution of precipitation in the vegetation period. At the early sowing time, the grain moistures were 5-12 % lower comparedto the late sowing time and 4-5 % lower compared to the optimum sowing treatment.There are great differences among the plant density of different maize hybrids. There are hybrids sensitive to higher plant density andthere are hybrids with wide and narrow optimum plant densities.The agro-ecological optimum fertilizer dosage of hybrids with a longer season (FAO 400-500) was N 30-40 kg ha-1 higher in favourableyears as compared to early hybrids.We can summarize our results by saying that we have to use hybrid-specific technologies in maize production. In the future, we have toincrease the level of inputs and have to apply the best appropriate hybrids and with respect to the agroecologial conditions, we can betterutilize the genetic yield potential.

scholarly journals Effect of the plant density on different maize (Zea mays L.) hybrids yields and leaf area index (LAI) values

2015 ◽  
pp. 51-56
Author(s):  
Eszter Murányi
Keyword(s):  
Leaf Area Index ◽  
Leaf Area ◽  
Plant Density ◽  
Maximum Yield ◽  
Row Spacing ◽  
Higher Plant ◽  
Area Index ◽  
Maize Hybrids ◽  
Small Plot ◽  
The University

We have investigated the plant number reactions of three maize hybrids of various genotypes in a small-plot field experiment. The plant numbers were 50, 70 and 90 thousand ha-1, while the row distances were 45 and 76 cm. The experiment was set on the Látókép Experimental Farm of Centre for Agricultural Sciences of the University of Debrecen in four replications on calcareous chernozem soil. The assimilation area and the leaf area index have important role in development of the crop yield. The studied three different genotype maize hybrids reached its maximum leaf area index at flowering. The maximum leaf area index increased linearly with increasing plant density. The season-hybrids reached less yield and leaf area index. According to our experimental results, we have concluded that with the decrease of the row spacing, the yield increased in the average of the hybrids. The studied hybrids reached the maximum yield at 70 and 90 plants ha-1 plant density. We determined the optimal plant number that is the most favourable for the certain hybrid under the given conditions.The higher plant density was favourable at 45 cm row spacing than 76 cm. The hybrids reached the maximum grain yield at 45 cm row spacing between 76 712–84 938 plants ha-1, while the optimum plant density at 76 cm row spacing changed between 61 875–65 876 plants ha-1. The leaf area index values between the applied plant density for the flowering period (July 1, 24), we defined a significant differences. In the archived yields were significant differences at the 45 cm row spacing between 50 and 70, 90 thousand ha-1 plant density, while the number for the 76 cm row spacing used did not cause a significant differences in the yield. There were significant differences between the examined hybrids of yields.

scholarly journals The effect of plant density to the yield results and the yield components of maize hybrids

2017 ◽  
pp. 89-93
Author(s):  
Péter Könczöl
Keyword(s):  
Plant Density ◽  
Maximum Yield ◽  
Ecological Factors ◽  
Kernel Weight ◽  
Yield Potential ◽  
Optimum Level ◽  
Higher Plant ◽  
Year Effect ◽  
Industrial Level ◽  
Main Component

Maize is the crop that is produced on the second largest area in our country, in Hungary. It is planted on nearly 25% of the country’s growing area and it was produced on 1 090 439 hectares in 2016. Despite the continuous development of the biological basis and productiontechnology, the growth of the yield results is not constant, its fluctuation is significant. It can be even up to 60%, because of the extremity of the years. The exploitation of the yield potential of modern hybrids is possible if we harmonize the effects of the ecological factors and properly applied instruments of agro technology and by these we ensure their interaction to reach a favorable outcome. The applied plant density is an important, well researched, but at industrial level a not enough utilized element of the maize production.The results of the extensive tests, done between 2009 and 2015, showed that the genotype, the year effect and the plant density are in strong correlation with each other determining the yield results. In the past seven years the examined genotypes reached the highest yieldperformance at the highest plant densities. The early hybrids (RM90–95, FAO 200–300) are capable of producing them at higher plant density, while in case of the mid and late maturity varieties the further increasing of the density after reaching the optimum level led to yield depression.According to our experimental results, the yield is in close positive correlation with the increase of the plant density. The effect of the growing season has great significance in forming the yield results and this determines the applicable plant density too.The yield of maize is determined by a resultant of components. The main component is the number of ears per plant and the amount of kernels per ear, which is calculated from the number of kernels on an ear and the weight of them. The number of the kernels on an ear iscalculated from the number of rows on the cob multiplied by the number of seeds in one row on the cob. In dry years, at lower yield levels the yield decreases because of the shorter ears, while at the higher levels the number of kernels in a row and the thousand-kernel weight decreases,causing yield depression this way. From our examinations it turned out that the plant density reaction of a genotype is individual, every variety reaches its maximum kernel number per hectare – in other words the maximum yield - in an individual way.

Antithrombin-mediated Inhibition of Factor Vlla-Tissue Factor Complex by the Synthetic Pentasaccharide Representing the Heparin Binding Site to Antithrombin

1996 ◽  
Vol 76 (01) ◽  
pp. 005-008 ◽  
Author(s):  
Jean Claude Lormeau ◽  
Jean Pascal Herault ◽  
Jean Marc Herbert
Keyword(s):  
Binding Site ◽  
Tissue Factor ◽  
Residual Activity ◽  
Coagulation Factors ◽  
Heparin Binding ◽  
Experimental Conditions ◽  
First Order ◽  
Heparin Binding Site ◽  
Coagulant Activity

SummaryWe examined the effect of the synthetic pentasaccharide representing the minimal binding site of heparin to antithrombin on the antithrombin-mediated inactivation of factor Vila bound to tissue factor. This effect was compared to the effect of unfractionated heparin. Using purified recombinant human coagulation factors and either a clotting or an amidolytic assay for the determination of the residual activity of factor Vila, we showed that the pentasaccharide was an efficient antithrombin-dependent inhibitor of the coagulant activity of tissue factor-factor Vila complex. In our experimental conditions, assuming a mean MW of 14,000 for heparin, the molar pseudo-first order rate constants for ATIII-mediated FVIIa inhibition by ATIII-binding heparin and by the synthetic pentasaccharide were found to be similar with respective values of 104,000 ± 10,500 min-1 and 112,000 ± 12,000 min-1 (mean ± s.e.m., n = 3)

Thromboplastin Related Differences in the Determination of International Normalised Ratio: A Cause for Concern?

1994 ◽  
Vol 72 (03) ◽  
pp. 426-429 ◽  
Author(s):  
S Kitchen ◽  
I D Walker ◽  
T A L Woods ◽  
F E Preston
Keyword(s):  
Patient Management ◽  
External Quality Assessment ◽  
Oral Anticoagulant Therapy ◽  
Warfarin Dosage ◽  
External Quality ◽  
External Quality Assessment Scheme ◽  
International Normalised Ratio ◽  
The Uk ◽  
The Relationship

SummaryWhen the International Normalised Ratio (INR) is used for control of oral anticoagulant therapy the same result should be obtained irrespective of the laboratory reagent used. However, in the UK National External Quality Assessment Scheme (NEQAS) for Blood Coagulation INRs determined using different reagents have been significantly different.For 18 NEQAS samples Manchester Reagent (MR) was associated with significantly lower INRs than those obtained using Diagen Activated (DA, p = 0.0004) or Instrumentation Laboratory PT-Fib HS (IL, p = 0.0001). Mean INRs for this group were 3.15, 3.61, and 3.65 for MR, DA, and IL respectively. For 61 fresh samples from warfarin-ised patients with INRs of greater than 3.0 the relationship between thromboplastins in respect of INR was similar to that observed for NEQAS data. Thus INRs obtained with MR were significantly lower than with DA or IL (p <0.0001). Mean INRs for this group were 4.01, 4.40, and 4.59 for MR, DA, and IL respectively.We conclude that the differences between INRs measured with the thromboplastins studied here are sufficiently great to influence patient management through warfarin dosage schedules, particularly in the upper therapeutic range of INR. There is clearly a need to address the issues responsible for the observed discrepancies.

Modern determinants of endometrium hyperplastic processes pathogenesis

2016 ◽  
pp. 137-142
Author(s):  
V.O. Benyuk ◽  
◽  
V.M. Goncharenko ◽  
T.R. Nykoniuk ◽  
◽  
...  
Keyword(s):  
Conservative Therapy ◽  
Solid Phase ◽  
Research Direction ◽  
Immunohistochemical Method ◽  
Results Of Treatment ◽  
Treatment And Prevention ◽  
Receptor Phenotype ◽  
The Relationship ◽  
Endometrial Proliferation

The objective: to еxplore the relationship between the activity of endometrial proliferation and the state of the local immune response in the uterus in the conditions berprestasi process. Patients and methods. Examined 228 women of reproductive and perimenopausal age with endometrial pathology using ultrasound and then performing hysteroresectoscopy. Determination of the concentrations of the cytokines IL-1, IL-2, IL-6 and TNF was performed by solid phase ELISA. Results. Found a trend that confirms the loss of sensitivity to hormones at the stage of malignancy of the endometrium and can be used as diagnostic determinants in determining the nature of intrauterine pathology and criterion of the effectiveness of conservative therapy. Conclusion. Improving etiopatogenetice approach to the therapy of hyperplastic proce.sses of endometrium with determination of receptor phenotype of the endometrium is a research direction in modern gynecology, which will help to improve the results of treatment and prevention of intrauterine pathology. Key words: endometrial hyperplasia,the receptors for progesterone and estrogen, immunohistochemical method.

Sign in / Sign up

Export Citation Format

Share Document