scholarly journals The effect of sowing date and plant density in three maize hybrids germination and growth dynamics

2016 ◽  
pp. 105-110
Author(s):  
Ákos Tótin ◽  
Péter Pepó
Keyword(s):  
Plant Density ◽  
Growth Dynamics ◽  
Sowing Date ◽  
Research Area ◽  
Sowing Time ◽  
Maize Hybrids ◽  
Maximum Value ◽  
Set Up ◽  
Germination And Growth ◽  
Late Sowing

The maize research was set up on chernozem soil at Látókép research area of the Centre for Agricultural Sciences University of Debrecen. We examined the following hybrids SY ARIOSO (FAO 300), P9486 (FAO360), DKC 4943 (FAO 410). The experience was set u pin three different plant density. These were 60, 76 and 90 thousand plant ha-1. The experience was set up in three different sawing date, early, average and late. The germination and growing dynamic measurements was measured in three hybrid, three sawing date, three plant density in four replication. well observed at the first sawing date (April 5) the soil was too cold therefore the germination was begins very slowly to be slowly increased. The second sowing time was the average (April 21) there the germination launch as soon as possible more rapid growth in the amount of heat. We experienced the most intense germination was in the case of the emergence late sowing date (May 5). Looking at the growth dynamics for the first two sawing date was side by side and almost equal to the maximum value. This is explained by the adaptive capacity of the maize to compensate for the sawing difference. For the third time, despite the delayed sawing the maize began to grow more dynamically than in previous sawing times due to the results of the initial good conditions it growth faster than halted in the second half of the season because of the high temperatures and lack of precipitation.

scholarly journals The effect of sowing date and plant density on the yield of maize (Zea mays L.) under different weather conditions

2018 ◽  
pp. 205-208
Author(s):  
Ákos Tótin ◽  
Péter Pepó
Keyword(s):  
Plant Density ◽  
Weather Conditions ◽  
Sowing Date ◽  
Research Area ◽  
Chernozem Soil ◽  
High Productivity ◽  
Sowing Dates ◽  
Plant Densities ◽  
Set Up ◽  
The University

Maize has high productivity and produces huge vegetative and generative phytomass, but this crop is very sensitive to agroecological (mainly to climatic, partly to pedological conditions) and agrotechnical circumstances. In Hungary, maize is grown on 1.1–1.2 million hectares, the national average yields vary between 4–7 t ha-1 depending on the year and the intensity of production technology. The longterm experiment was set up in 2015–2016 on chernozem soil in the Hajdúság (eastern Hungary). The maize research was set up on chernozem soil at the Látókép MÉK (Faculty of Agricultural and Food Sciences and Environmental Management) research area of the University of Debrecen. We examined the following commonly used hybrids of Hungary: SY ARIOSO (FAO 300), P9074 (FAO 310), P9486 (FAO 360), SY Octavius (FAO 400), GK Kenéz (FAO 410), DKC 4943 (FAO 410). The experiment was set up in three different plant densities. These were 60, 76, 90 thousand plant ha-1. The experiment was set up with three different sowing dates, early, average and late sowing. The yield was measured using a special plot harvester (Sampo Rosenlew 2010), measuring the weight of the harvested plot and also taking a sample from it. As a next step, we calculated the yield (t ha-1) of each plot at 14% of moisture content to compare them to each other. We evaluated the obtained data using Microsoft Excel 2015.

scholarly journals Examination of the population density and sowing date of different maize genotypes in the Hajdúság region

2012 ◽  
pp. 111-115
Author(s):  
Károly Máriás ◽  
Péter Pepó
Keyword(s):  
Statistical Difference ◽  
Plant Density ◽  
Sowing Date ◽  
Homogeneous Field ◽  
Corn Hybrids ◽  
Sowing Time ◽  
Average Temperature ◽  
Significant Difference ◽  
Plant Densities ◽  
Late Sowing

The experiment was carried out 6 km from Debrecen, next to the main road 47 on a homogeneous field on brown forest soil. Five corn hybrids were tested in the trial (DKC 4795, DKC 4995, KWS Kornelius, NK Cobalt, PR37 N01) at three different sowing times (early – 5th April, average – 21st April, late – 10th May). At each sowing time, three different plant densities were applied (modest – 58 500 plants ha-1, average –70 200 plants ha-1, high – 82 300 plants ha-1). The agrotechnics appliedin the experiment satisfied the requirements of modern corn cultivation. In the study, the best yield result was achieved with the early sowing time out of the three examined sowing times (11 315 kg ha-1), which was significantly different (LSD5%=495 kg) from that of the average sowing time (10 690 kg ha-1), however, there was no statistically justifiable difference between the yield results of the early and the late sowing times. There was a significant difference also between the average and late sowing time. Our results indicate that the different sowing times resulted in a different flowering times. Consequently, the stands of early and late sowing time reached this critical stadium of growth under proper climatic circumstances (precipitation: 39 mm and 136 mm, average temperature at flowering: 18.1 oC and 20.3 oC), while flowering in the case of the average sowing time of 21st April was in the first half of July and the average temperature at flowering was warmer (23.2 oC) with only 10 mm precipitation.In the experiment, the plant density response was also examined. According to the measured data, four of the five hybrids responded badly to the increasing plant density. We found that the plant density of 58 500 plant ha-1 gave the largest yield results (DKC 4995 11 794 kg ha-1 – NK Cobalt 10 998 kg ha-1, average of five hybrids: 11 430 kg ha-1), while the lowest yields were obtained at the plant density of 82 300 plant ha-1 (KWS Kornelius 11 037 kg ha-1 – NK Cobalt 10 019 kg ha-1, average of five hybrids 10 720 kg ha-1). The difference between the two plant densities was significant (LSD5%=494 kg), however, the 70 200 plant ha-1 plant density did not show any statistical difference from neither the 58 500 ha-1 nor from the 82 300 plant ha-1 stands. When examining the data of the hybrids separately, we found that there was a significant difference between the average yield of the lowest and highest plant densities only in the case of three (DKC 4795, DKC 4995, NKCobalt) out of the five hybrids (DKC 4795: 11 757 kg ha-1 – 10 857 ha-1 where LSD5% =816 kg; DKC 4995: 11 794 kg ha-1 – 10 738 kg ha-1 where LSD5%=853kg; NK Cobalt: 10 998 kg ha-1 – 10 019 kg ha-1 where LSD5%=630 kg ha-1), while a  significant difference between the second and third plant densities was observed only in one case (DKC 4995: 11 726 kg ha-1 – 10 738 ha-1 where LSD5%=853 kg). In all other cases, there was no statistical difference between the differentplant densities.

scholarly journals Examination of plant number and sowing date in different crop years

2014 ◽  
pp. 79-82
Author(s):  
Károly Máriás
Keyword(s):  
Plant Density ◽  
Sowing Date ◽  
Sowing Time ◽  
Main Road ◽  
Average Temperature ◽  
Yield Result ◽  
June July ◽  
Life Cycle Process ◽  
Late Sowing ◽  
Density Results

We examinated three agrotechnical factors in 2011, 2012 and 2013 (sowing time, nutrient factor and plant density), as well as five different effects of genotypes on the crop of corn, on brown soil in the Hajdúság. The experiment was set next to the 47 main road in Debrecen, at the 6th kilometre stone. In the present processing I would like to touch on the effects of sowing time and plant density, as I do not have the chance to present the whole experiment results here. It is true for all three years that the humidity factors differ from the long years’ average, so the genotypes had different reactions on it. According to our results we found out that the late sowing time’s result had the most successful crop yield result with 9975 kg ha-1, while examining the plant density the result of the highest plant density proved to be the best with 9967 kg ha-1. We take the critical season in corns’ life cycle process into consideration when examining the results: June, July and August months’ humidity and temperature markers. According to the results in the tested 3 months we had 227 mm humidity with 10 days, when the average temperature was over 25 °C. The same factors in 2012 were 135.5 mm humidity with 37 days of average temperatures of 25 °C and in 2013 we recorded 102.5 mm humidity with 24 of these days. Our goal is to help the farmers in the Hajdúság with the results of our sowing times, hybrid choice and plant density results.

scholarly journals The impact of crop year and certain agrotechnical factors on maize yield

2013 ◽  
pp. 13-16
Author(s):  
Zsófia Becze
Keyword(s):  
Plant Density ◽  
Growing Season ◽  
Maize Yield ◽  
Sowing Date ◽  
Development Rate ◽  
Genetic Characteristics ◽  
Maize Hybrids ◽  
Ecological Optimum ◽  
Set Up ◽  
The Impact

The experiment was set up with eight maize hybrids with different genetic characteristics in 2012. In our study were included hybrids with different length of growing season. We studied the effect of NKP fertilization and plant density on the yield. Comparing to controll treatment it was found that highest yield was at N40+PK treatment. It was three times higher than agro-ecological optimum. Due to the droughty year the effect of plant density it was minimum. The development rate in case of sowing date I. and II. showed an almost identical picture in the scope of the sowing date trial. However, hybrids with excellent adaptability were capable of a yield above average even in this extreme year.

scholarly journals Response of Late Sowing on the Yield and Yield Contributing Character of Different Varieties of Mustard and Rapeseed in Coastal Area of Barguna

1970 ◽  
Vol 42 (4) ◽  
pp. 441-448
Author(s):  
MA Razzaque ◽  
MR Talukder ◽  
Shaleh Uddin ◽  
SI Khan ◽  
Altab Hossain
Keyword(s):  
Coastal Area ◽  
Brassica Species ◽  
Sowing Date ◽  
Rabi Season ◽  
Sowing Time ◽  
Sowing Dates ◽  
Main Plot ◽  
Testing Site ◽  
Late Sowing ◽  
Plot Design

An experiment was carried at Multi Location Testing site Barguna to determine suitable variety of mustard (Brassica species) for the late sowing condition for the coastal area of Bangladesh during rabi season of 1998-1999 and 1999-2000. Four varieties of mustard such as Daulat, Rai-5, Improved tory-7, and Ishurdi local with four sowing dates viz.15 Nov, 23 Nov, 30 Nov. and 7 Dec. were used for the experiment. The experiment was laid out in a split plot design with sowing date in the main plot and varieties in the sub plot. The results revealed that the variety Daulat (1035 kg/ha) and Ishurdi local (1014 kg/ha) produced identically superior yield irrespective of sowing time. 15 November (1164 kg/ha) and 23 November (1002 kg/ha) recorded identically superior yield irrespect of variety. Daulat and Ishurdi local variety sowing could be delayed up to 30 November to obtain a profitable yield of (872 kg/ha) and (940 kg/ha) respectively which was still economically profitable. Key words: Mustard and rapes, Late sowing , variety, Yield, coastal area. Bangladesh J. Sci. Ind. Res. 42(4), 441-448., 2007

Effect of sowing date on the yield and quality of maize hybrids with different growing seasons

2009 ◽  
Vol 57 (4) ◽  
pp. 389-399 ◽  
Author(s):  
J. Nagy
Keyword(s):  
Protein Content ◽  
Starch Content ◽  
Sowing Date ◽  
Grain Protein Content ◽  
Water Supplies ◽  
Maize Hybrids ◽  
Growing Seasons ◽  
Sowing Dates ◽  
Significant Difference ◽  
Late Sowing

The yield, protein and starch content of Martonvásár maize hybrids belonging to different FAO groups were examined in experiments involving early, optimal and late sowing dates in two different years (drought — 2007, favourable water supplies — 2008) on a calcareous chernozem soil with loam texture at the Látókép Experimental Station of the Centre of Agricultural Sciences and Engineering, University of Debrecen.Sowing date had a significant effect on maize grain yield in the dry year. The grain yields of hybrids with longer growing periods were significantly higher than those with shorter growing periods in both years, but they reacted sensitively to the change in sowing date in the dry year. Due to the rainfall distribution in the growing season, sowing date did not modify the performance of the hybrids in the year with favourable water supplies. Sowing date had a significant effect on the grain protein content in the dry year, with significantly higher values after late sowing than after early or optimal sowing. Averaged over the sowing dates, the protein content of the FAO 200 hybrid was significantly higher in both years than that of hybrids in other FAO groups. In the dry year, the greatest difference in protein content could be observed between the early and late sowing dates for hybrids in all four FAO groups. A negative correlation was found between yield and protein content. Sowing date significantly increased the starch content of maize in the favourable year, with a significant difference between early and late sowing dates.In the dry year higher starch contents were recorded for all the hybrids and for all the sowing dates than in the favourable year. In the dry year, sowing date only caused a significant difference in the starch content in the case of FAO 200 sown at optimal and late sowing dates. In the favourable year, a significant difference was only obtained for the starch content of the FAO 400 hybrid sown at early and late sowing dates. Satisfactory quality can only be achieved if suitable genotypes are grown with appropriate technologies.

Impact of nutrient supply, sowing time and plant density on maize yields

2005 ◽  
Vol 53 (1) ◽  
pp. 59-70 ◽  
Author(s):  
M. Sárvári
Keyword(s):  
Moisture Content ◽  
Plant Density ◽  
Sowing Date ◽  
Nutrient Supply ◽  
Yield Stability ◽  
Sowing Time ◽  
Npk Fertilizers ◽  
Chilling Resistance ◽  
Grain Moisture ◽  
Plant Densities

In order to enhance the adaptability and yield stability of maize, the effect of nutrient supply and plant density on yield was studied on a calcareous chernozem soil in Debrecen, while the relationship between sowing date and the grain moisture content at harvest was investigated on a typical meadow soil in Hajdúböszörmény. In the plant density experiment, the plant densities applied were 45, 60, 75 and 90 thousand plants/ha. The optimal fertilizer rates for the maize hybrids were: N 40-120, P2O5 25-75, K2O 30-90 kg ha-1. The application of NPK fertilizers in a wet year increased the yield by 40-50%. Hybrids with good chilling resistance at germination can be sown as early as 10 April, when the soil temperature reaches 8-10°C. There was a significant correlation between sowing date and the grain moisture content at harvest. When hybrids with good chilling resistance at germination were sown early, the grain moisture content at harvest was reduced by 5-10%. A plant density higher than the optimum reduces yield and yield stability. The optimal plant densities determined in the experiment were 60, 75 and 90 thousand plants/ha for two, three and one hybrid, respectively.

scholarly journals Effects of the cropyear and the agronomical factors on agronomical elements of different sweet corn (Zea Mays L. convar. saccharata Koern.) genotypes in long-term experiment

2012 ◽  
pp. 105-110
Author(s):  
Ádám Lente
Keyword(s):  
Plant Density ◽  
Sweet Corn ◽  
Sowing Date ◽  
Higher Plant ◽  
Sowing Time ◽  
Sowing Dates ◽  
Long Term Experiment ◽  
Plant Densities ◽  
Fertilization Level ◽  
The University

In the crop season of 2010 (rainy year), we studied the effect of three agrotechnical factors (sowing time, fertilization, plant density) and four different genotypes on the agronomical characteristics of sweet corn on chernozem soil in the Hajdúság. The experiments were carried out at the Látókép Experimental Farm of the University of Debrecen. In the experiment, two sowing dates (27 April, 26 May), six fertilization levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and four genotypes (Jumbo, Enterprise, Prelude, Box-R) were used at two plant densities (45 thousand plants ha-1, 65 thousand plants ha-1). The amount of precipitation in the season of 2010 was 184 mm higher, while the average temperature was 0.8 oC higher in the studied months than the average of 30 years. Weather was more favourable for sweet maize at the first sowing date, if we consider the yields, however, if we evaluate the agronomical data and yield elements (number of cobs, cob length and diameter, the number of kernel rows, the number of kernels per row) it can be stated that the size of the fertile cobs was greater at the second sowing date due to the lower number of cobs. The largest number of fertile cobs was harvested in the case of the hybrid Enterprise (72367.9 ha-1) in the higher plant density treatment (65 thousand ha-1) at the fertilization level of N120+PK when the first sowing date was applied. The largest cobs were harvested from the hybrid Box-R (cob weight with husks: 516.7 g, number of kernels in one row: 45.7) at the lower plant density (45 thousand plants ha-1) in the second sowing date treatment. Cob diameter and the number of kernel rows were the highest for the hybrid Prelude.

scholarly journals Production technology development of millet at different ecological conditions

2015 ◽  
pp. 63-67
Author(s):  
Emese Seres ◽  
Mihály Sárvári
Keyword(s):  
Production Technology ◽  
Secondary Production ◽  
Plant Density ◽  
Technology Development ◽  
Nutrient Supply ◽  
Sowing Time ◽  
Ecological Conditions ◽  
Late Sowing

The millet is a very special plant with good adaptation that gives the possibility for the late sowing and secondary production. However the effects of late sowing modifies the efficiency of the agrotechnological elements. The exainations – focused on this aspect – was conducted in the DU RINY and DU RIK in small plots in four replications in 2014. Among the examined factors (sowing time, nutrient supply, growing area) sowing time had the largest effect. The effectiveness of the agrotechnological elements decreases under unfavourable circumstances caused by the late sowing. The agrotechnical elements modifies the yields in the examined genotype. Sowing time had the biggest effect on the yields of millet. The genotype „Maxi” had the highest yield in the different treatment variations. The yield differences were significant between the sowing time and plant density variations, but the nutrient supply had not significant effect (the rate of precipitation was unfavourable in 2014 season).

scholarly journals Complex appreciation of agrotechnikal factors of sweet corn (Zea Mays L. convar. saccharata Koern.)

2010 ◽  
pp. 77-81
Author(s):  
Ádám Lente
Keyword(s):  
Zea Mays ◽  
Zea Mays L ◽  
Plant Density ◽  
Sweet Corn ◽  
Maximum Yield ◽  
Research Station ◽  
Density Level ◽  
Chernozem Soil ◽  
Sowing Time ◽  
Late Sowing

Three agrotechnical factors (sowing time, fertilization, plant density) and the effect of two different genotypes on the yields of sweet corn was studied, in the dry and warm crop-year of 2009 on a chernozem soil in the County of Hajdúság. The experiments were carried out on the Látókép Research Station of Debrecen University. The experiment involved two sowing times (21 of April and 19 of May), six fertilizer levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and two genotypes (Jumbo, Enterprise). Four plant density levels, 45 thousand ha-1, 55 thousand ha-1, 65 thousand ha-1 and 75 thousand ha-1 were used. In the early sowing time the highest yield was obtained with 65 thousand ha-1 plant density level and N120+PK treatment of Jumbo (18169 kg ha-1), while the maximum yield of Enterprise was 17818 kg ha-1 with 75 thousand ha-1 plant density level and N90+PK dose. In case of the late sowing time both hybrids gave the highest yield with 75 thousand ha-1 plant density level and N30 +PKtreatment, with a crop yield of 13143 kg ha-1 (Jumbo) and 14324 kg ha-1, ( Enterprise). 

Sign in / Sign up

Export Citation Format

Share Document