scholarly journals Production technology development of millet at different ecological conditions

2015 ◽  
pp. 63-67
Author(s):  
Emese Seres ◽  
Mihály Sárvári
Keyword(s):  
Production Technology ◽  
Secondary Production ◽  
Plant Density ◽  
Technology Development ◽  
Nutrient Supply ◽  
Sowing Time ◽  
Ecological Conditions ◽  
Late Sowing

The millet is a very special plant with good adaptation that gives the possibility for the late sowing and secondary production. However the effects of late sowing modifies the efficiency of the agrotechnological elements. The exainations – focused on this aspect – was conducted in the DU RINY and DU RIK in small plots in four replications in 2014. Among the examined factors (sowing time, nutrient supply, growing area) sowing time had the largest effect. The effectiveness of the agrotechnological elements decreases under unfavourable circumstances caused by the late sowing. The agrotechnical elements modifies the yields in the examined genotype. Sowing time had the biggest effect on the yields of millet. The genotype „Maxi” had the highest yield in the different treatment variations. The yield differences were significant between the sowing time and plant density variations, but the nutrient supply had not significant effect (the rate of precipitation was unfavourable in 2014 season).

scholarly journals The impact of sowing date, production area and nutrient supply on the yield and quality parameters of millet

2014 ◽  
pp. 105-109
Author(s):  
Emese Seres
Keyword(s):  
Protein Content ◽  
Secondary Production ◽  
Sowing Date ◽  
Nutrient Supply ◽  
Quality Parameters ◽  
Sowing Time ◽  
Yield And Quality ◽  
Production Area ◽  
The Impact ◽  
Late Sowing

The millet is a very special plant with good adaptation that gives the possibility for the late sowing and secondary production. However the effects of late sowing modifies to the efficiency of the agrotechnological elements. The examinations – focused on this aspect – was conducted in the DU CAS RINY in the small plots in four replications in 2013. The largest effect was recorded in the sowing time of the examined factors (sowing time, nutrient supply, growing area). The effectiveness of the agrotechnological elements decreases under unfavourable circumstances caused by the late sowing. The examined factors did not affect in the protein content and milling rate, except in the latest sowing time when protein content was significantly the highest.

Impact of nutrient supply, sowing time and plant density on maize yields

2005 ◽  
Vol 53 (1) ◽  
pp. 59-70 ◽  
Author(s):  
M. Sárvári
Keyword(s):  
Moisture Content ◽  
Plant Density ◽  
Sowing Date ◽  
Nutrient Supply ◽  
Yield Stability ◽  
Sowing Time ◽  
Npk Fertilizers ◽  
Chilling Resistance ◽  
Grain Moisture ◽  
Plant Densities

In order to enhance the adaptability and yield stability of maize, the effect of nutrient supply and plant density on yield was studied on a calcareous chernozem soil in Debrecen, while the relationship between sowing date and the grain moisture content at harvest was investigated on a typical meadow soil in Hajdúböszörmény. In the plant density experiment, the plant densities applied were 45, 60, 75 and 90 thousand plants/ha. The optimal fertilizer rates for the maize hybrids were: N 40-120, P2O5 25-75, K2O 30-90 kg ha-1. The application of NPK fertilizers in a wet year increased the yield by 40-50%. Hybrids with good chilling resistance at germination can be sown as early as 10 April, when the soil temperature reaches 8-10°C. There was a significant correlation between sowing date and the grain moisture content at harvest. When hybrids with good chilling resistance at germination were sown early, the grain moisture content at harvest was reduced by 5-10%. A plant density higher than the optimum reduces yield and yield stability. The optimal plant densities determined in the experiment were 60, 75 and 90 thousand plants/ha for two, three and one hybrid, respectively.

scholarly journals The effect of sowing date and plant density in three maize hybrids germination and growth dynamics

2016 ◽  
pp. 105-110
Author(s):  
Ákos Tótin ◽  
Péter Pepó
Keyword(s):  
Plant Density ◽  
Growth Dynamics ◽  
Sowing Date ◽  
Research Area ◽  
Sowing Time ◽  
Maize Hybrids ◽  
Maximum Value ◽  
Set Up ◽  
Germination And Growth ◽  
Late Sowing

The maize research was set up on chernozem soil at Látókép research area of the Centre for Agricultural Sciences University of Debrecen. We examined the following hybrids SY ARIOSO (FAO 300), P9486 (FAO360), DKC 4943 (FAO 410). The experience was set u pin three different plant density. These were 60, 76 and 90 thousand plant ha-1. The experience was set up in three different sawing date, early, average and late. The germination and growing dynamic measurements was measured in three hybrid, three sawing date, three plant density in four replication. well observed at the first sawing date (April 5) the soil was too cold therefore the germination was begins very slowly to be slowly increased. The second sowing time was the average (April 21) there the germination launch as soon as possible more rapid growth in the amount of heat. We experienced the most intense germination was in the case of the emergence late sowing date (May 5). Looking at the growth dynamics for the first two sawing date was side by side and almost equal to the maximum value. This is explained by the adaptive capacity of the maize to compensate for the sawing difference. For the third time, despite the delayed sawing the maize began to grow more dynamically than in previous sawing times due to the results of the initial good conditions it growth faster than halted in the second half of the season because of the high temperatures and lack of precipitation.

scholarly journals Complex appreciation of agrotechnikal factors of sweet corn (Zea Mays L. convar. saccharata Koern.)

2010 ◽  
pp. 77-81
Author(s):  
Ádám Lente
Keyword(s):  
Zea Mays ◽  
Zea Mays L ◽  
Plant Density ◽  
Sweet Corn ◽  
Maximum Yield ◽  
Research Station ◽  
Density Level ◽  
Chernozem Soil ◽  
Sowing Time ◽  
Late Sowing

Three agrotechnical factors (sowing time, fertilization, plant density) and the effect of two different genotypes on the yields of sweet corn was studied, in the dry and warm crop-year of 2009 on a chernozem soil in the County of Hajdúság. The experiments were carried out on the Látókép Research Station of Debrecen University. The experiment involved two sowing times (21 of April and 19 of May), six fertilizer levels (control, N30+PK, N60+PK, N90+PK, N120+PK, N150+PK) and two genotypes (Jumbo, Enterprise). Four plant density levels, 45 thousand ha-1, 55 thousand ha-1, 65 thousand ha-1 and 75 thousand ha-1 were used. In the early sowing time the highest yield was obtained with 65 thousand ha-1 plant density level and N120+PK treatment of Jumbo (18169 kg ha-1), while the maximum yield of Enterprise was 17818 kg ha-1 with 75 thousand ha-1 plant density level and N90+PK dose. In case of the late sowing time both hybrids gave the highest yield with 75 thousand ha-1 plant density level and N30 +PKtreatment, with a crop yield of 13143 kg ha-1 (Jumbo) and 14324 kg ha-1, ( Enterprise). 

scholarly journals Study of some physiologic properties of different genotype sweet corn hybrids

2012 ◽  
pp. 105-110
Author(s):  
Ádám Lente
Keyword(s):  
Leaf Area ◽  
Chlorophyll Content ◽  
Photosynthetic Activity ◽  
Plant Density ◽  
Sweet Corn ◽  
Nutrient Supply ◽  
Plant Production ◽  
Sowing Time ◽  
Area Index ◽  
Leaf Area Duration

The effect of nutrient-supply (control, N120+PK) and two different genotypes on the physiologic properties of sweet corn has been investigated in the crop-year of 2011 on chernozem soil in the Hajdúság region. The experiments were carried out at the Experimental Station of the University of Debrecen in Debrecen-Látókép. The experiment was sewn in two different sowing times: the 21st April can be considered as an early, while the 19th May as a late sowing time. The two involved hybrids were Jumbo and Enterprise. The applied plant density was 65 000 plants per hectare.Our aim with this experiment was to study the plant production, just as the main affecting factors of its development and dynamics, like nutrient-supply and genotypes. We aimed to study and analyse the relationships between these factors and plant production. In this study following parameters were measured and calculated: photosynthetic activity, chlorophyll-content (SPAD-value), leaf area index (LAI) and leaf area duration (LAD). Regarding the analysis of photosynthetic activity values no obvious relationship between the measured values and the applied hybrids, just as nutrient-supply has been revealed. Analysing the SPAD-values it can be stated that the chlorophyll-content of the measured leaves showed an increasing tendency due to the nutrient-supply. The highest values have been measured in the intensive cob development phase of the early sowing time plots.Regarding the LAI-values we have found significant differences between the fertilizer treatments in both sowing time treatments. In case of the leaf area duration values – that is derived from the LAI values – nutrient-supply has positively affected the duration of the assimilation area.

scholarly journals Examination of the population density and sowing date of different maize genotypes in the Hajdúság region

2012 ◽  
pp. 111-115
Author(s):  
Károly Máriás ◽  
Péter Pepó
Keyword(s):  
Statistical Difference ◽  
Plant Density ◽  
Sowing Date ◽  
Homogeneous Field ◽  
Corn Hybrids ◽  
Sowing Time ◽  
Average Temperature ◽  
Significant Difference ◽  
Plant Densities ◽  
Late Sowing

The experiment was carried out 6 km from Debrecen, next to the main road 47 on a homogeneous field on brown forest soil. Five corn hybrids were tested in the trial (DKC 4795, DKC 4995, KWS Kornelius, NK Cobalt, PR37 N01) at three different sowing times (early – 5th April, average – 21st April, late – 10th May). At each sowing time, three different plant densities were applied (modest – 58 500 plants ha-1, average –70 200 plants ha-1, high – 82 300 plants ha-1). The agrotechnics appliedin the experiment satisfied the requirements of modern corn cultivation. In the study, the best yield result was achieved with the early sowing time out of the three examined sowing times (11 315 kg ha-1), which was significantly different (LSD5%=495 kg) from that of the average sowing time (10 690 kg ha-1), however, there was no statistically justifiable difference between the yield results of the early and the late sowing times. There was a significant difference also between the average and late sowing time. Our results indicate that the different sowing times resulted in a different flowering times. Consequently, the stands of early and late sowing time reached this critical stadium of growth under proper climatic circumstances (precipitation: 39 mm and 136 mm, average temperature at flowering: 18.1 oC and 20.3 oC), while flowering in the case of the average sowing time of 21st April was in the first half of July and the average temperature at flowering was warmer (23.2 oC) with only 10 mm precipitation.In the experiment, the plant density response was also examined. According to the measured data, four of the five hybrids responded badly to the increasing plant density. We found that the plant density of 58 500 plant ha-1 gave the largest yield results (DKC 4995 11 794 kg ha-1 – NK Cobalt 10 998 kg ha-1, average of five hybrids: 11 430 kg ha-1), while the lowest yields were obtained at the plant density of 82 300 plant ha-1 (KWS Kornelius 11 037 kg ha-1 – NK Cobalt 10 019 kg ha-1, average of five hybrids 10 720 kg ha-1). The difference between the two plant densities was significant (LSD5%=494 kg), however, the 70 200 plant ha-1 plant density did not show any statistical difference from neither the 58 500 ha-1 nor from the 82 300 plant ha-1 stands. When examining the data of the hybrids separately, we found that there was a significant difference between the average yield of the lowest and highest plant densities only in the case of three (DKC 4795, DKC 4995, NKCobalt) out of the five hybrids (DKC 4795: 11 757 kg ha-1 – 10 857 ha-1 where LSD5% =816 kg; DKC 4995: 11 794 kg ha-1 – 10 738 kg ha-1 where LSD5%=853kg; NK Cobalt: 10 998 kg ha-1 – 10 019 kg ha-1 where LSD5%=630 kg ha-1), while a  significant difference between the second and third plant densities was observed only in one case (DKC 4995: 11 726 kg ha-1 – 10 738 ha-1 where LSD5%=853 kg). In all other cases, there was no statistical difference between the differentplant densities.

scholarly journals Examination of plant number and sowing date in different crop years

2014 ◽  
pp. 79-82
Author(s):  
Károly Máriás
Keyword(s):  
Plant Density ◽  
Sowing Date ◽  
Sowing Time ◽  
Main Road ◽  
Average Temperature ◽  
Yield Result ◽  
June July ◽  
Life Cycle Process ◽  
Late Sowing ◽  
Density Results

We examinated three agrotechnical factors in 2011, 2012 and 2013 (sowing time, nutrient factor and plant density), as well as five different effects of genotypes on the crop of corn, on brown soil in the Hajdúság. The experiment was set next to the 47 main road in Debrecen, at the 6th kilometre stone. In the present processing I would like to touch on the effects of sowing time and plant density, as I do not have the chance to present the whole experiment results here. It is true for all three years that the humidity factors differ from the long years’ average, so the genotypes had different reactions on it. According to our results we found out that the late sowing time’s result had the most successful crop yield result with 9975 kg ha-1, while examining the plant density the result of the highest plant density proved to be the best with 9967 kg ha-1. We take the critical season in corns’ life cycle process into consideration when examining the results: June, July and August months’ humidity and temperature markers. According to the results in the tested 3 months we had 227 mm humidity with 10 days, when the average temperature was over 25 °C. The same factors in 2012 were 135.5 mm humidity with 37 days of average temperatures of 25 °C and in 2013 we recorded 102.5 mm humidity with 24 of these days. Our goal is to help the farmers in the Hajdúság with the results of our sowing times, hybrid choice and plant density results.

scholarly journals The role of the hybrid-specific technological recommendations of maize in precision crop production procedures

2012 ◽  
pp. 297-302
Author(s):  
Endre Széll ◽  
Máté Makra
Keyword(s):  
Production Technology ◽  
Crop Production ◽  
Plant Density ◽  
Agronomic Traits ◽  
Field Trials ◽  
Agricultural Practice ◽  
Corn Hybrids ◽  
Sowing Time ◽  
Yield Increase ◽  
The Impact

The necessity of application of hybrid specific crop production technology has been confirmed not only by trial results but also by the experiences gained from the agricultural practice. For this reason it is essential to test and collect data in field trials about the specific agronomic traits of the corn hybrids belonging to different maturity groups and genotypes. Corn hybrids are tested for their responses to sowing time, plant density and fertilizer supply; sensitivity to herbicides; and lately, the resistance to the damages caused by the larvae of corn root worm. Last but not least, mention should be made of the differences in the responses of the corn hybrids to the damages caused by drought stress. Based on the trial results, suggestions for the hybrid specific corn production are compiled and made public for the experts and farmers engaged in corn growing. Corn hybrids may deliver maximum yields on the impact of specific crop production technology only in case if it relies on carefully done general production technology including soil cultivation, seed bed preparation and weed control. Similarly, precision crop production technology may advance the yield increase in economic way if it is constantly drawing on the source of research results.

scholarly journals Response of Late Sowing on the Yield and Yield Contributing Character of Different Varieties of Mustard and Rapeseed in Coastal Area of Barguna

1970 ◽  
Vol 42 (4) ◽  
pp. 441-448
Author(s):  
MA Razzaque ◽  
MR Talukder ◽  
Shaleh Uddin ◽  
SI Khan ◽  
Altab Hossain
Keyword(s):  
Coastal Area ◽  
Brassica Species ◽  
Sowing Date ◽  
Rabi Season ◽  
Sowing Time ◽  
Sowing Dates ◽  
Main Plot ◽  
Testing Site ◽  
Late Sowing ◽  
Plot Design

An experiment was carried at Multi Location Testing site Barguna to determine suitable variety of mustard (Brassica species) for the late sowing condition for the coastal area of Bangladesh during rabi season of 1998-1999 and 1999-2000. Four varieties of mustard such as Daulat, Rai-5, Improved tory-7, and Ishurdi local with four sowing dates viz.15 Nov, 23 Nov, 30 Nov. and 7 Dec. were used for the experiment. The experiment was laid out in a split plot design with sowing date in the main plot and varieties in the sub plot. The results revealed that the variety Daulat (1035 kg/ha) and Ishurdi local (1014 kg/ha) produced identically superior yield irrespective of sowing time. 15 November (1164 kg/ha) and 23 November (1002 kg/ha) recorded identically superior yield irrespect of variety. Daulat and Ishurdi local variety sowing could be delayed up to 30 November to obtain a profitable yield of (872 kg/ha) and (940 kg/ha) respectively which was still economically profitable. Key words: Mustard and rapes, Late sowing , variety, Yield, coastal area. Bangladesh J. Sci. Ind. Res. 42(4), 441-448., 2007

Sign in / Sign up

Export Citation Format

Share Document