scholarly journals Biometria dos órgãos linfoides e composição físico- química da carne de frangos de crescimento lento alimentados com bagaço de mandioca e complexo enzimático / Biometry of lymphoid organs and physical-chemical composition of meat of slow growth chickens fed with cassava bagasse and enzymatic complexes

2021 ◽  
Vol 7 (8) ◽  
pp. 84829-84847
Author(s):  
Carla Fonseca Alves Campos ◽  
Kênia Ferreira Rodrigues ◽  
Roberta Gomes Marçal Vieira Vaz ◽  
Danilo Vargas Gonçalves Vieira ◽  
Giovana Cristina Giannesi ◽  
...  
2016 ◽  
Vol 7 (2) ◽  
pp. 42
Author(s):  
Aparecida De Fátima Oliveira Silva ◽  
Leila Maria Girondi ◽  
Suellen Jensen Klososki ◽  
Tatiana Colombo Pimentel ◽  
Carlos Eduardo Barão

Cassava bagasse, regarded as an agricultural residue can be used as raw material in the development of new products. Cereal bars are foods that have increasingly gained consumers because of the practical use. The objective of this study was to evaluate the effect of adding cassava bagasse (0, 8 and 25%) on the chemical composition and sensory acceptance of coconut cereal bars with Brazil nuts. Cereal bars with cassava bagasse had higher moisture, protein and carbohydrates (fiber) contents than cereal bars without bagasse, lower ash contents and similar fat content. The addition of cassava bagasse caused a decrease in the acceptance of the cereal bars only in the concentration of 25%, however, the products had hedonic values greater than 7 in a 9-point hedonic scale and acceptability indices higher than 80%, indicating that consumers moderately liked them. It can be concluded that the use of up to 25% cassava bagasse in the cereal bar formulation yields products with improved nutritional value and appropriated consumer acceptance. The addition of cassava bagasse to food products is a good alternative in the use of this byproduct, due to the sensory characteristics of the obtained products and the reduction of production costs, because the cassava bagasse has low cost and increases the production yield.


2016 ◽  
Vol 219 ◽  
pp. 773-777 ◽  
Author(s):  
Marcia Maria de Souza Moretti ◽  
Olavo Micali Perrone ◽  
Christiane da Costa Carreira Nunes ◽  
Sebastião Taboga ◽  
Maurício Boscolo ◽  
...  

Author(s):  
A. Kolesnov ◽  
S. Tsimbalaev ◽  
V. Ivlev ◽  
V. Vassiliev ◽  
F. Lamerdonova

The article discusses a unified analytical algorithm for identification of component composition of winemaking products, established in the new national standard GOST R 59570-2021 «Winemaking products. Identification of component in terms of determination of the origin of ethanol and other compounds of physical-chemical composition». The standard provides modern scientific data on winemaking products, as well as data on natural, agrotechnical and technological factors that can impact the component composition of products to interpret the results of analytical evaluations. The article provides practical examples of use of analytical methods established in the standard for the study of winemaking products produced in Russia, Kazakhstan, Armenia and foreign countries.


2019 ◽  
Vol 98 ◽  
pp. 01028
Author(s):  
Alfiia Khusainova ◽  
Vladimir Naumov ◽  
Oksana Naumova

This article is about the research on gold obtained from mine wastes and other technogenic mineral formations. The authors investigated how solid phases of gold in supergene zone transform from various deposits. Results show the following supergene gold transformations by various physical, chemical, biological and mechanical processes occurring in the wastes. Transformations result in changes in morphology and chemical composition, and special redistribution of gold in wastes.


ChemInform ◽  
2015 ◽  
Vol 46 (30) ◽  
pp. no-no
Author(s):  
Hui Zhou ◽  
Ai Hong Meng ◽  
Yan Qiu Long ◽  
Qing Hai Li ◽  
Yan Guo Zhang

2019 ◽  
Vol 70 (11) ◽  
pp. 4029-4034
Author(s):  
Daniela Popa ◽  
Mariana Constantiniuc ◽  
Kamel Earar ◽  
Veronica Mercut ◽  
Monica Scrieciu ◽  
...  

The objective of this paper is to inform on the indications, appearance and advantages offered by each category of materials used in CAD / CAM technique for different prosthetic restorations.Modern techniques in restorative dentistry include CAD/CAM systems and materials that can be CAD/CAM processed. It is very important to know the physical-chemical properties and the indications of these materials to translate the patient�s wishes to reality providing the ideal restoration. There are a variety of CAD/CAM materials to choose from, all designed to provide efficient restoration design and production. We can choose from available materiales including glass ceramics, nano ceramics, zirconia, hybrid ceramics, BioHPP, in blocks or disks form.


Author(s):  
Naiara Menezes Bezerra ◽  
Wênia Maria Vieira Cosmo ◽  
Edsania Princelânia Xavier Nézio ◽  
Laiza Oliveira Pessoa ◽  
Dalany Menezes Oliveira ◽  
...  

<p class="Normal1">The food industry has sought to adapt to the trend of healthy consumption habits and, for this, it has invested in the research and production of products with functional purposes, since functional foods have proven to bring several health benefits. Therefore, it was proposed, with this research, the elaboration of a functional bar, rich in functional and protein ingredients, taking into account the nutritional content and its practicality of consumption. For this, varied proportions of quinoa (10%, 17% and 15%, for F1, F2 and F3, respectively) and peanuts (20%, 15% and 17%, for F1, F2 and F3, respectively), were used, and the functional bars were enriched with fructooligosaccharide (FOS), with a ratio between dry ingredients and binding agents of 70% and 30%, respectively. The design of the binary mixture was used for the various compositions of formulations. Analysis of variance (ANOVA) was applied to evaluate the physical-chemical composition and its average in relation to the Tukey test at 5% confidence. The three formulations were considered to have a high protein content (21.54%, for F1; 18.17%, for F2; 20.00%, for F3), according to legislation, with a high lipid content (22.02%, for F1; 13.42%, for F2; 22.40%, for F3), coming from good sources, and considerable carbohydrate content (49.62%, for F1; 54.44%, for F2; 47.84% , for F3), including fibers. The proposed functional bar proved to be balanced in nutrients and calories, presenting nutritional characteristics compatible with a diet rich in proteins.</p>


Author(s):  
Emmanuella de Oliveira Moura Araújo ◽  
José Geraldo Bezerra Galvão Júnior ◽  
Guilherme Ferreira da Costa Lima ◽  
Stela Antas Urbano ◽  
Adriano Henrique do Nascimento Rangel

Sign in / Sign up

Export Citation Format

Share Document