scholarly journals Pemodelan Penurunan Pondasi Struktur Bangunan di Tanah Lunak Kota Banjarmasin Menggunakan Ansys

2021 ◽  
Vol 5 (2) ◽  
pp. 117-130
Author(s):  
Darmansyah Tjitradi ◽  
Eliatun Eliatun ◽  
Oktafianus Steven Tjitradi

The soil in Banjarmasin City is of soft clay type having a very low bearing capacity. Hence, it is normal for buildings in this area to have gelam wooden piles as part of the foundation. Foundations based on gelam wooden piles rely on friction which results in the building experiencing differential settlement, tilt, and cracks on the structural elements. This foundation settlement will be modeled using ANSYS software involving fifteen building structural models with brick walls under loads according to SNI 1727:2013 and due to settlement at the support. The modeling aims at understanding the effects of using tie beams on the pattern of structural damage in buildings that experience differential settlement on soft soil. Hasil penelitian menunjukkan bahwa penggunaan tie beam pada pondasi pada tanah lunak berpengaruh terhadap pola kerusakan. Pada tanah keras, ini tidak membawa efek seperti itu tetapi sebaliknya, itu meningkatkan tingkat ketidaktentuan statis struktur. Dalam kasus portal bentang tunggal, pola retakan menyerupai huruf "V" terbalik jika penurunan terjadi pada tumpuan samping. Di portal bentang ganda, di sisi lain, pola retakan dinding bata menyerupai huruf "V" jika penurunan terjadi pada penyangga samping, dan "V" terbalik jika terjadi di antara penyangga.

2018 ◽  
Vol 7 (2.5) ◽  
pp. 84 ◽  
Author(s):  
Susy Srihandayani ◽  
Desi Putri ◽  
Nuning Kurniasih ◽  
Lusi Dwi Putri

A soft clay soil has a low support energy, so it needs to be planned a foundation form that able to improve soil bearing capacity and estimate a maximum load that can be supported by that soil. Planning a float foundation is one of the solutions to overcome that problem. The behavior of burden degradation at float foundation which obtained from encumbering of axial introduced here. Proposed analysis based on classical theory and examination of foundation at the field. Float foundation models with different amount and dimension. At the field, a pipe which one of its ends closed tightly came into soft clay soil and then encumbered step by step. Giving an axial burden and degradation model area and noted. Boundary capacities in each foundation model estimated from the curve of load-displacement yielded of the test. From the result of theoretical analysis at a single float foundation got a proportionate result with the field result but after giving additional pile/pipe with larger one's cap got the theoretical result of bearing capacity bigger than the field result. The efficiency value of the comparison of bearing capacities theoretically that using five classic methods got more than 100%, and after giving additional pipe, the efficiency value near to 100%.  


Problematic soil which cause extra problems from engineering point of views which result in its composition or environmental conditions change. The weak subsoil deposits like soft clay pose the low bearing capacity and more settlements over long periods of time. The stone column technique is better, economical and cost-effective method of soft soil stabilization. They are used to support embankments, large raft foundations and isolated footings. Numerous researchers have just completed various vertical stacking probes stone column balanced out clay bed and have discovered that expands bearing capacity of delicate clay, diminishes displacement and changes the conduct of burden settlement. In the current study, a 2D finite element model is completed to evalute how the delicate clay soil balanced out by stone column are affected by the vertical burdens. Stone column were intended for examinations with fluctuating in their angle proportions (change in estimations of length, L and breadth, D) of stone column. The effect of floating stone column and end bearing stone segment on delicate clay is in like manner controlled by using various L/D ratios. Besides, the present outcomes express how the heap conveying limit of stone column is differed by changing in the angle proportions of the stone column. Likewise ends were drawn that bulging impact of stone column plays a vital role in conveying vertical burden.


2013 ◽  
Vol 347-350 ◽  
pp. 1203-1206
Author(s):  
Jia Jia Zheng ◽  
Li Jian Wu ◽  
Run Hua Guo

In order to provide a theoretical basis for the use of lacustrine soft clay hard shell layer, the first thing to do is understanding its bearing capacity characteristics. Based on the project of Nan-Mao section in Hunan provincial highway S204, combining with bearing capacity test, the bearing capacity characteristics and failure mode of hard shell foundation was comprehensively analyzed. From the field bearing capacity test, it is found that the PS curve of hard shell layer has obvious changes from elastic to plastic, while the PS curve of soft soil layer under hard shell layer just has elastoplastic stage from the beginning, and the failure mode of foundation mainly are punching failure and general shear failure. So for the quality control of lacustrine hard shell soft foundation mainly includes two aspects: the deformation and overall stability.


2020 ◽  
Vol 3 (4) ◽  
pp. 1137
Author(s):  
Christian Eka Putra ◽  
Chaidir Anwar Makarim

The existence of soft soil is one of the problems in the field of construction. Soft soil is soil that has high water content and low carrying capacity. In the case of this toll road, soil investigation at the site shows that the subgrade in the toll road planning is soft clay soil to a depth of 32 meters so that soil improvement is needed. High landfill built on soft subgrade without reinforcement will experience landslides. So it is necessary to strengthen the landfill and repair the subgrade to prevent road slides. The soil improvement methods in use are vacuum preloading and Prefabricated Vertical Drain with the vacuum functioning as an additional load. In addition to accelerating the consolidation process, the vacuum can also reduce the height of the embankment needed to achieve the desired planned road elevation. Strengthening with geotextile is also carried out on the landfill with a height of 5.94 meters so that there is no landslide on the fill. Using soil improvement methods such as vacuum preloading and prefabricated vertical drain will increase the bearing capacity of the soil so that differences in bearing capacity occur before and after repair. AbstrakKeberadaan tanah lunak menjadi salah satu masalah dalam bidang konstruksi. Tanah lunak adalah tanah yang memiliki kadar air yang tinggi dan daya dukung yang rendah. Pada kasus jalan tol ini, penyelidikan tanah di lokasi menunjukan bahwa tanah dasar pada perencanaan jalan tol merupakan tanah lempung lunak hingga kedalaman 32 meter sehingga dibutuhkan perbaikan tanah dasar. Timbunan tinggi yang dibangun di atas tanah dasar lunak tanpa perkuatan akan mengalami kelongsoran. Sehingga diperlukan perkuatan timbunan dan perbaikan tanah dasar untuk mencegah kelongsoran jalan. Metode perbaikan tanah yang digunakan adalah vacuum preloading dan Prefabricated Vertical Drain dengan vacuum berfungsi sebagai beban tambahan. Selain mempercepat proses penurunan, vacuum juga dapat mengurangi tinggi timbunan yang dibutuhkan untuk mencapai elevasi jalan rencana yang diinginkan. Perkuatan dengan geotextile juga dilakukan pada timbunan dengan tinggi yang mencapai 5.94 meter supaya tidak terjadi kelongsoran pada timbunan tersebut. Dengan menggunakan metode perbaikan tanah berupa vacuum preloading dan prefabricated vertical drain akan meningkatkan daya dukung tanah sehingga akan diketahui perbedaan daya dukung yang terjadi sebelum dan sesudah diperbaiki.


2019 ◽  
Vol 2019 ◽  
pp. 1-11
Author(s):  
Jing-Bo Su ◽  
Zheng-yang Yu ◽  
Ya-Ru Lv ◽  
Yi-Huan Zhu ◽  
Hua-Qing Wang

This paper addresses the problem of open gaps caused by differential settlement in the process of constructing sluice buildings in soft soil beach areas, combined with the construction of sluice and supporting facilities in a reclamation project. First, the change rules for the shear strength and compression modulus of soft soil under different consolidation degrees are studied by theoretical analysis. Then, an interaction model for soft soil and pile soil is established using the geotechnical finite element analysis software MIDAS/GTS NX. The change rules for the vertical and horizontal ultimate bearing capacities of a single pile with the degree of soil consolidation are studied. On this basis, a three-dimensional numerical analysis model of drainage sluice, seawall, cofferdam, and foundation soil is established, and the relationship between the degree of soil consolidation and the development of structural gaps caused by differential settlement is obtained. The research results show that the bearing capacity of a single pile increases greatly with the consolidation of soil around the pile and that the gap width between the structures in the project decreases with increasing consolidation. This paper provides a theoretical basis for the prediction of pile bearing capacity in the preliminary design stage and the evaluation and calculation of differential settlement of intersecting buildings in soft soil beach areas.


2019 ◽  
Vol 9 (1) ◽  
pp. 481-489
Author(s):  
D.C. Lat ◽  
I.B.M. Jais ◽  
N. Ali ◽  
B. Baharom ◽  
N.Z. Mohd Yunus ◽  
...  

AbstractPolyurethane (PU) foam is a lightweight material that can be used efficiently as a ground improvement method in solving excessive and differential settlement of soil foundation mainly for infrastructures such as road, highway and parking spaces. The ground improvement method is done by excavation and removal of soft soil at shallow depth and replacement with lightweight PU foam slab. This study is done to simulate the model of marine clay soil integrated with polyurethane foam using finite element method (FEM) PLAXIS 2D for prediction of settlement behavior and uplift effect due to polyurethane foam mitigation method. Model of soft clay foundation stabilized with PU foam slab with variation in thickness and overburden loads were analyzed. Results from FEM exhibited the same trend as the results of the analytical method whereby PU foam has successfully reduced the amount of settlement significantly. With the increase in PU foam thickness, the settlement is reduced, nonetheless the uplift pressure starts to increase beyond the line of effective thickness. PU foam design chart has been produced for practical application in order to adopt the effective thickness of PU foam within tolerable settlement value and uplift pressure with respect to different overburden loads for ground improvement works.


2011 ◽  
Vol 71-78 ◽  
pp. 32-36 ◽  
Author(s):  
Xin Jiang Wei ◽  
Jie Hong ◽  
Gang Wei

Considering the interaction of building-soil-tunnel, the grillage beams foundation frame building vertical crossed by Double-O-Tube (DOT) shield tunnel was simulated by 3D MIDAS/ GTS software, and the impact of construction on the building was analyzed. The results show that: the ground settlement trough caused by DOT shield tunnel can be fitted by peck formula; during the passage of the shield tunneling through the building, the settlement of the building increased and settlement trough was wilder; the settlement was stable and had a little rebound when shield machine already passed the building; with the increase of driving distance, the first principal stress P1 increased and then was stable; with the increase of L, the shape of foundation settlement curve changed, and the maximum differential settlement between columns increased but was small.


Géotechnique ◽  
1997 ◽  
Vol 47 (2) ◽  
pp. 339-345 ◽  
Author(s):  
M. J. Kenny ◽  
K. Z. Andrawes

Sign in / Sign up

Export Citation Format

Share Document