IDENTIFIKASI POTENSI AKUIFER MATA AIR PANAS DI KELURAHAN KOYA TONDANO UNTUK PARIWISATA MENGGUNAKAN METODE GEOLISTRIK RESISTIVITAS KONFIGURASI DIPOL-DIPOL

PHARMACON ◽  
2019 ◽  
Vol 8 (4) ◽  
pp. 920
Author(s):  
Meylva C. Pojoh ◽  
As'ari As'ari ◽  
Ferdy Ferdy
Keyword(s):  
Cross Section ◽  
Hot Springs ◽  
Hot Spring ◽  
Line Length ◽  
Research Purpose ◽  
Configuration Data ◽  
Dipole Configuration ◽  
2D Resistivity

ABSTRACTThis research purpose is to find hot springs aquifer in Koya Village. Measurement in this research is using MAE X612-EM resistivitymeter, with 48 and 32 pieces of electrode, 10 and 5 meter spaces, line length 480m, 240m and 180m, amount of line 5, and using resistivity geoelectrical method dipole-dipole configuration. Data with format DAT processed by notepad and RES2DINV software. The process results is subsurface 2D resistivity cross section that describe the location of hot springs aquifer. The results acquired in this research is hot springs aquifer with resistivity (1.00-6.55) Ωm. Line 1 have 10 locations of hot springs aquifer with depth ≤ 30 m, line 2 have 5 locations of hot springs aquifer with depth ≤ 27 m, line 3 have 9 locations of hot springs aquifer with depth ≤ 40m, line 4 have 1 location of hot spring aquifer with depth ≤ 7m and line 5 have 3 locations of hot springs aquifer with depth ≤ 7m.Keywords         : Hot spring, geoelectric, dipol-dipol. ABSTRAKPenelitian ini bertujuan untuk menemukan lokasi akuifer  mata air panas di Kelurahan Koya. Pengukuran dalam penelitian ini dilakukan dengan menggunakan resistivitymeter MAE-X612-EM, dengan jumlah elektroda yang dipakai 48 dan 32 buah, spasi 10m dan 5m, panjang lintasan 480m, 240m dan 180m, jumlah lintasan 5, dan menggunakan metode geolistrik resistivitas konfigurasi Dipol-dipol. Data dengan format DAT diolah menggunakan  software notepad dan res2dinv. Hasil pengolahan adalah tampang lintang resistivity 2D bawah permukaan yang menggambarkan keberadaan akuifer air panas. Hasil penelitian diperoleh akuifer air panas dengan resistivitas (1,00 – 6,55) Ωm. Lintasan 1 terdapat 10 lokasi akuifer air panas pada kedalaman ≤ 30 m dari permukaan tanah. Lintasan 2 diperoleh 5 lokasi akuifer air panas pada kedalaman ≤ 27 m. Lintasan 3 terdapat 9 lokasi akuifer air panas pada kedalaman ≤ 40 m. Lintasan 4 terdapat 1 lokasi akuifer air panas pada kedalaman ≤ 7 m. Lintasan 5 terdapat 3 lokasi akuifer air panas pada kedalaman ≤ 7 m.Kata kunci      : Air panas, geolistrik, dipol-dipol.

scholarly journals Origin of the low-medium temperature hot springs around Nanjing, China

2021 ◽  
Vol 13 (1) ◽  
pp. 820-834
Author(s):  
Jun Ma ◽  
Zhifang Zhou
Keyword(s):  
Hot Springs ◽  
Hot Spring ◽  
Hot Water ◽  
Geothermal Water ◽  
Geological Condition ◽  
Medium Temperature ◽  
Rock Interaction ◽  
Karst Landform ◽  
Karst Landforms ◽  
Development And Management

Abstract The exploration of the origin of hot spring is the basis of its development and utilization. There are many low-medium temperature hot springs in Nanjing and its surrounding karst landform areas, such as the Tangshan, Tangquan, Lunshan, and Xiangquan hot springs. This article discusses the origin characters of the Lunshan hot spring with geological condition analysis, hydrogeochemical data, and isotope data. The results show that the hot water is SO4–Ca type in Lunshan area, and the cation content of SO4 is high, which are related to the deep hydrogeological conditions of the circulation in the limestone. Carbonate and anhydrite dissolutions occur in the groundwater circulation process, and they also dominate the water–rock interaction processes in the geothermal reservoir of Lunshan. The hot water rising channels are deeply affected by the NW and SN faults. Schematic diagrams of the conceptual model of the geothermal water circulation in Lunshan are plotted. The origin of Tangshan, Tangquan, and Xiangquan hot springs are similar to the Lunshan hot spring. In general, the geothermal water in karst landforms around Nanjing mainly runs through the carbonate rock area and is exposed near the core of the anticlinal structure of karst strata, forming SO4–Ca/SO4–Ca–Mg type hot spring with the water temperature less than 60°C. The characters of the hot springs around Nanjing are similar, which are helpful for the further research, development, and management of the geothermal water resources in this region.

scholarly journals Radon Activity Concentrations in Natural Hot Spring Water: Dose Assessment and Health Perspective

2021 ◽  
Vol 18 (3) ◽  
pp. 920
Author(s):  
Eka Djatnika Nugraha ◽  
Masahiro Hosoda ◽  
June Mellawati ◽  
Untara Untara ◽  
Ilsa Rosianna ◽  
...  
Keyword(s):  
Public Health ◽  
Effective Dose ◽  
Radiation Protection ◽  
Water Samples ◽  
Hot Springs ◽  
Hot Spring ◽  
Annual Effective Dose ◽  
Spring Water ◽  
Dose Assessment ◽  
West Java

The world community has long used natural hot springs for tourist and medicinal purposes. In Indonesia, the province of West Java, which is naturally surrounded by volcanoes, is the main destination for hot spring tourism. This paper is the first report on radon measurements in tourism natural hot spring water in Indonesia as part of radiation protection for public health. The purpose of this paper is to study the contribution of radon doses from natural hot spring water and thereby facilitate radiation protection for public health. A total of 18 water samples were measured with an electrostatic collection type radon monitor (RAD7, Durridge Co., USA). The concentration of radon in natural hot spring water samples in the West Java region, Indonesia ranges from 0.26 to 31 Bq L−1. An estimate of the annual effective dose in the natural hot spring water area ranges from 0.51 to 0.71 mSv with a mean of 0.60 mSv for workers. Meanwhile, the annual effective dose for the public ranges from 0.10 to 0.14 mSv with an average of 0.12 mSv. This value is within the range of the average committed effective dose from inhalation and terrestrial radiation for the general public, 1.7 mSv annually.

scholarly journals Microbial Diversity of Terrestrial Geothermal Springs in Armenia and Nagorno-Karabakh: A Review

2021 ◽  
Vol 9 (7) ◽  
pp. 1473
Author(s):  
Ani Saghatelyan ◽  
Armine Margaryan ◽  
Hovik Panosyan ◽  
Nils-Kåre Birkeland
Keyword(s):  
16S Rrna ◽  
Microbial Diversity ◽  
High Altitude ◽  
Hot Springs ◽  
Hot Spring ◽  
Abiotic Factors ◽  
Rrna Gene ◽  
Geothermal Springs ◽  
Bacterial Phyla ◽  
Terrestrial Hot Springs

The microbial diversity of high-altitude geothermal springs has been recently assessed to explore their biotechnological potential. However, little is known regarding the microbiota of similar ecosystems located on the Armenian Highland. This review summarizes the known information on the microbiota of nine high-altitude mineralized geothermal springs (temperature range 25.8–70 °C and pH range 6.0–7.5) in Armenia and Nagorno-Karabakh. All these geothermal springs are at altitudes ranging from 960–2090 m above sea level and are located on the Alpide (Alpine–Himalayan) orogenic belt, a seismically active region. A mixed-cation mixed-anion composition, with total mineralization of 0.5 mg/L, has been identified for these thermal springs. The taxonomic diversity of hot spring microbiomes has been examined using culture-independent approaches, including denaturing gradient gel electrophoresis (DGGE), 16S rRNA gene library construction, 454 pyrosequencing, and Illumina HiSeq. The bacterial phyla Proteobacteria, Bacteroidetes, Cyanobacteria, and Firmicutes are the predominant life forms in the studied springs. Archaea mainly include the phyla Euryarchaeota, Crenarchaeota, and Thaumarchaeota, and comprise less than 1% of the prokaryotic community. Comparison of microbial diversity in springs from Karvachar with that described for other terrestrial hot springs revealed that Proteobacteria, Bacteroidetes, Actinobacteria, and Deinococcus–Thermus are the common bacterial groups in terrestrial hot springs. Contemporaneously, specific bacterial and archaeal taxa were observed in different springs. Evaluation of the carbon, sulfur, and nitrogen metabolism in these hot spring communities has revealed diversity in terms of metabolic activity. Temperature seems to be an important factor in shaping the microbial communities of these springs. Overall, the diversity and richness of the microbiota are negatively affected by increasing temperature. Other abiotic factors, including pH, mineralization, and geological history, also impact the structure and function of the microbial community. More than 130 bacterial and archaeal strains (Bacillus, Geobacillus, Parageobacillus, Anoxybacillus, Paenibacillus, Brevibacillus Aeribacillus, Ureibacillus, Thermoactinomyces, Sporosarcina, Thermus, Rhodobacter, Thiospirillum, Thiocapsa, Rhodopseudomonas, Methylocaldum, Desulfomicrobium, Desulfovibrio, Treponema, Arcobacter, Nitropspira, and Methanoculleus) have been reported, some of which may be representative of novel species (sharing 91–97% sequence identity with their closest matches in GenBank) and producers of thermozymes and biomolecules with potential biotechnological applications. Whole-genome shotgun sequencing of T. scotoductus K1, as well as of the potentially new Treponema sp. J25 and Anoxybacillus sp. K1, were performed. Most of the phyla identified by 16S rRNA were also identified using metagenomic approaches. Detailed characterization of thermophilic isolates indicate the potential of the studied springs as a source of biotechnologically valuable microbes and biomolecules.

scholarly journals Carbon Source Preference in Chemosynthetic Hot Spring Communities

2015 ◽  
Vol 81 (11) ◽  
pp. 3834-3847 ◽  
Author(s):  
Matthew R. Urschel ◽  
Michael D. Kubo ◽  
Tori M. Hoehler ◽  
John W. Peters ◽  
Eric S. Boyd
Keyword(s):  
High Temperature ◽  
National Park ◽  
Hot Springs ◽  
Dissolved Inorganic Carbon ◽  
Hot Spring ◽  
Affinity Constant ◽  
Rrna Gene ◽  
Organic Substrates ◽  
Short Term ◽  
Acetate Assimilation

ABSTRACTRates of dissolved inorganic carbon (DIC), formate, and acetate mineralization and/or assimilation were determined in 13 high-temperature (>73°C) hot springs in Yellowstone National Park (YNP), Wyoming, in order to evaluate the relative importance of these substrates in supporting microbial metabolism. While 9 of the hot spring communities exhibited rates of DIC assimilation that were greater than those of formate and acetate assimilation, 2 exhibited rates of formate and/or acetate assimilation that exceeded those of DIC assimilation. Overall rates of DIC, formate, and acetate mineralization and assimilation were positively correlated with spring pH but showed little correlation with temperature. Communities sampled from hot springs with similar geochemistries generally exhibited similar rates of substrate transformation, as well as similar community compositions, as revealed by 16S rRNA gene-tagged sequencing. Amendment of microcosms with small (micromolar) amounts of formate suppressed DIC assimilation in short-term (<45-min) incubations, despite the presence of native DIC concentrations that exceeded those of added formate by 2 to 3 orders of magnitude. The concentration of added formate required to suppress DIC assimilation was similar to the affinity constant (Km) for formate transformation, as determined by community kinetic assays. These results suggest that dominant chemoautotrophs in high-temperature communities are facultatively autotrophic or mixotrophic, are adapted to fluctuating nutrient availabilities, and are capable of taking advantage of energy-rich organic substrates when they become available.

scholarly journals In-Situ Metatranscriptomic Analyses Reveal the Metabolic Flexibility of the Thermophilic Anoxygenic Photosynthetic Bacterium Chloroflexusaggregans in a Hot Spring Cyanobacteria-Dominated Microbial Mat

2021 ◽  
Vol 9 (3) ◽  
pp. 652
Author(s):  
Shigeru Kawai ◽  
Joval N. Martinez ◽  
Mads Lichtenberg ◽  
Erik Trampe ◽  
Michael Kühl ◽  
...  
Keyword(s):  
Energy Metabolism ◽  
Environmental Conditions ◽  
Microbial Mats ◽  
Carbon Fixation ◽  
Hot Springs ◽  
Hot Spring ◽  
Photosynthetic Bacterium ◽  
Early Morning ◽  
Metabolic Flexibility

Chloroflexus aggregans is a metabolically versatile, thermophilic, anoxygenic phototrophic member of the phylum Chloroflexota (formerly Chloroflexi), which can grow photoheterotrophically, photoautotrophically, chemoheterotrophically, and chemoautotrophically. In hot spring-associated microbial mats, C. aggregans co-exists with oxygenic cyanobacteria under dynamic micro-environmental conditions. To elucidate the predominant growth modes of C. aggregans, relative transcription levels of energy metabolism- and CO2 fixation-related genes were studied in Nakabusa Hot Springs microbial mats over a diel cycle and correlated with microscale in situ measurements of O2 and light. Metatranscriptomic analyses indicated two periods with different modes of energy metabolism of C. aggregans: (1) phototrophy around midday and (2) chemotrophy in the early morning hours. During midday, C. aggregans mainly employed photoheterotrophy when the microbial mats were hyperoxic (400–800 µmol L−1 O2). In the early morning hours, relative transcription peaks of genes encoding uptake hydrogenase, key enzymes for carbon fixation, respiratory complexes as well as enzymes for TCA cycle and acetate uptake suggest an aerobic chemomixotrophic lifestyle. This is the first in situ study of the versatile energy metabolism of C. aggregans based on gene transcription patterns. The results provide novel insights into the metabolic flexibility of these filamentous anoxygenic phototrophs that thrive under dynamic environmental conditions.

scholarly journals Geochemical Modeling of Scale Formation due to Cooling and CO2-degassing in San Kamphaeng Geothermal Field, Northern Thailand

2021 ◽  
Vol 20 (3) ◽  
Author(s):  
Sutthipong Taweelarp ◽  
Supanut Suntikoon ◽  
Thaned Rojsiraphisal ◽  
Nattapol Ploymaklam ◽  
Schradh Saenton
Keyword(s):  
Carbon Dioxide ◽  
Hot Springs ◽  
Hot Spring ◽  
Geochemical Modeling ◽  
Chemical Properties ◽  
Geothermal Field ◽  
Spring Water ◽  
Northern Thailand ◽  
Scaling Potential ◽  
Co2 Degassing

Scaling in a geothermal piping system can cause serious problems by reducing flow rates and energy efficiency. In this work, scaling potential of San Kamphaeng (SK) geothermal energy, Northern Thailand was assessed based on geochemical model simulation using physical and chemical properties of hot spring water. Water samples from surface seepage and groundwater wells, analyzed by ICP-OES and ion chromatograph methods for chemical constituents, were dominated by Ca-HCO3 facies having partial pressure of carbon dioxide of 10–2.67 to 10–1.75 atm which is higher than ambient atmospheric CO2 content. Surface seepage samples have lower temperature (60.9°C) than deep groundwater (83.1°C) and reservoir (127.1°C, based on silica geothermometry). Geochemical characteristics of the hot spring water indicated significant difference in chemical properties between surface seepage and deep, hot groundwater as a result of mineral precipitation along the flow paths and inside well casing. Scales were mainly composed of carbonates, silica, Fe-Mn oxides. Geochemical simulations based on multiple chemical reaction equilibria in PHREEQC were performed to confirm scale formation from cooling and CO2-degassing processes. Simulation results showed total cumulative scaling potential (maximum possible precipitation) from 267-m deep well was estimated as 582.2 mg/L, but only 50.4% of scaling potential actually took place at SK hot springs. In addition, maximum possible carbon dioxide outflux to atmosphere from degassing process in SK geothermal field, estimated from the degassing process, was 6,960 ton/year indicating a continuous source of greenhouse gas that may contribute to climate change. Keywords: Degassing, Geochemical modeling, PHREEQC, San Kamphaeng Hot Springs, Scaling

scholarly journals Changes in Quinone Profiles of Hot Spring Microbial Mats with a Thermal Gradient

1999 ◽  
Vol 65 (1) ◽  
pp. 198-205 ◽  
Author(s):  
Akira Hiraishi ◽  
Taichi Umezawa ◽  
Hiroyuki Yamamoto ◽  
Kenji Kato ◽  
Yonosuke Maki
Keyword(s):  
Thermal Gradient ◽  
Microbial Mats ◽  
Hot Springs ◽  
Hot Spring ◽  
Thermal Gradients ◽  
Cyanobacterial Mats ◽  
Dissimilarity Index ◽  
Quinone Profile ◽  
Bacterial Mats ◽  
Different Temperatures

ABSTRACT The respiratory and photosynthetic quinones of microbial mats which occurred in Japanese sulfide-containing neutral-pH hot springs at different temperatures were analyzed by spectrochromatography and mass spectrometry. All of the microbial mats that developed at high temperatures (temperatures above 68°C) were so-called sulfur-turf bacterial mats and produced methionaquinones (MTKs) as the major quinones. A 78°C hot spring sediment had a similar quinone profile.Chloroflexus-mixed mats occurred at temperatures of 61 to 65°C and contained menaquinone 10 (MK-10) as the major component together with significant amounts of either MTKs or plastoquinone 9 (PQ-9). The sunlight-exposed biomats growing at temperatures of 45 to 56°C were all cyanobacterial mats, in which the photosynthetic quinones (PQ-9 and phylloquinone) predominated and MK-10 was the next most abundant component in most cases. Ubiquinones (UQs) were not found or were detected in only small amounts in the biomats growing at temperatures of 50°C and above, whereas the majority of the quinones of a purple photosynthetic mat growing at 34°C were UQs. A numerical analysis of the quinone profiles was performed by using the following three parameters: dissimilarity index (D), microbial divergence index (MDq ), and bioenergetic divergence index (BDq ). A D matrix tree analysis showed that the hot spring mats consisting of the sulfur-turf bacteria, Chloroflexus spp., cyanobacteria, and purple phototrophic bacteria formed distinct clusters. Analyses ofMDq and BDq values indicated that the microbial diversity of hot spring mats decreased as the temperature of the environment increased. The changes in quinone profiles and physiological types of microbial mats in hot springs with thermal gradients are discussed from evolutionary viewpoints.

scholarly journals Hydrochemical characteristics of the hot spring waters in the Kangding district related to the Lushan <i>M</i><sub>S</sub> 7.0 earthquake in Sichuan, China

2014 ◽  
Vol 2 (12) ◽  
pp. 7293-7308
Author(s):  
Z. Chen ◽  
X. Zhou ◽  
J. Du ◽  
C. Xie ◽  
L. Liu ◽  
...  
Keyword(s):  
Water Samples ◽  
Carbonate Rocks ◽  
Hot Springs ◽  
Hot Spring ◽  
Spring Water ◽  
Lushan Earthquake ◽  
Hydrochemical Characteristics ◽  
Hydrochemical Data ◽  
Deep Earth ◽  
Precipitation Water

Abstract. Hydrogeochemistry of 10 hot springs in the Kangding district was investigated by analyzing cation and anion concentrations of the spring waters. The water samples were collected within 5 days after the Lushan earthquake. The spring waters are classified into 7 chemical types based on the hydrochemical compositions. Comparison with the hydrochemical data before the Lushan earthquake, concentrations of Ca2+, HCO3− and TDS of the waters from the Guanding, Erdaoqiao, Gonghe, Erhaoying, Tianwanhe and Caoke springs evidently increased, which resulted from enhancing interaction between deep-earth fluids and carbonate rocks by the increment of dissolved CO2 in the groundwater. Concentrations of Na+, Cl− and SO42− of the waters from the Guanding, zheduotang, Xinxing and Gonghe springs were decreased, indicating dilution of precipitation water. Concentrations of Na+ and SO42− of the Erhaoying spring water increased, which may be attributed to the more supplement of fluids enriched in sulfur. The results indicate that hydrochemical components of spring water can be used as an effective indicator for earthquakes.

Sign in / Sign up

Export Citation Format

Share Document