scholarly journals DAMAGE BY DEFOLIATING INSECTS AND ITS EFFECT ON THE QUALITY OF WOOD FOR CHARCOAL PRODUCTION

2021 ◽  
Vol 55 (7-8) ◽  
pp. 933-938
Author(s):  
ANTONIO JOSÉ VINHA ZANUNCIO ◽  
AMÉLIA GUIMARÃES CARVALHO ◽  
CARLOS MIGUEL SIMÕES DA SILVA ◽  
VINÍCIUS RESENDE DE CASTRO ◽  
ANGÉLICA DE CASSIA OLIVEIRA CARNEIRO ◽  
...  
Keyword(s):  
Wood Quality ◽  
Eucalyptus Grandis ◽  
Basic Density ◽  
Charcoal Production ◽  
Fixed Carbon ◽  
Eucalyptus Saligna ◽  
B Trees ◽  
The Impact ◽  
Holocellulose Content

The objective of the present work has been to evaluate the impact of damage caused by defoliating insects on wood quality and charcoal production, and to quantify the losses per hectare according to the charcoal produced. Seven-year-old Eucalyptus grandis × Eucalyptus urophylla (clone A) and Eucalyptus saligna (clone B) trees, both in healthy condition and damaged by defoliating insects, were selected, with five trees to be used per treatment. Wood disks were removed from the trees at 0, 25, 50, 75 and 100% of the commercial height for analyzing the properties of the wood and for preparing and characterizing the charcoal. Damage by defoliating insects decreased the basic density of the trees at all axial positions by up to 23 kg m-3. Also, the extractives and lignin contents increased, while the holocellulose content decreased in the attacked plants. Changes in the wood characteristics led to increased fixed carbon content and gravimetric yield, and a decrease in density. The charcoal productivity from the plants damaged by defoliating insects was lower, mainly because of the decrease in volumetric production.

scholarly journals QUALITY OF REACTION WOOD IN Eucalyptus TREES TILTED BY WIND FOR PULP PRODUCTION

CERNE ◽  
2017 ◽  
Vol 23 (3) ◽  
pp. 291-297
Author(s):  
Walter Torezani Neto Boschetti ◽  
Juarez Benigno Paes ◽  
Graziela Baptista Vidaurre ◽  
Marina Donária Chaves Arantes ◽  
João Gabriel Missia da Silva
Keyword(s):  
Chemical Composition ◽  
Chemical Constituents ◽  
Wood Quality ◽  
Basic Density ◽  
Kraft Pulping ◽  
Normal Wood ◽  
Reaction Wood ◽  
Opposite Wood ◽  
Holocellulose Content

ABSTRACT This study aims to evaluate the quality of normal, tension and opposite wood of eucalyptus trees lengthwise, in straight and inclined stems, affected by wind action. It also aims to explain the pulping parameters resultant from the quality of the wood. The trees were grouped into four tilt ranges, ranging from 0 to 50º, and the basic density, chemical composition of the wood, and performance in kraft pulping were assessed. Normal and tension wood had similar basic densities; while for opposite wood, the density was lower, being responsible for a decrease in reaction wood density. The chemical composition of the wood was influenced by the presence of reaction wood in the stem. Tension and opposite wood showed lower levels of extractives and lignin and higher holocellulose content when compared to normal wood, with favorable wood quality for pulping. The increase in holocellulose content and the reduction of lignin and extractives content contributed positively to a more delignified pulp and reduction of the Kappa number. However, after cooking the reaction wood under the same conditions as those of normal wood, reaction wood pulping tends to have a lower screen yields. Due to differences in basic density and chemical constituents between opposite and normal wood, it is recommended not to designate the opposite wood as normal wood.

scholarly journals QUALITY OF Eucalyptus urograndis CHARCOAL PRODUCED IN THE SOUTHERN REGION OF TOCANTINS

FLORESTA ◽  
2019 ◽  
Vol 49 (4) ◽  
pp. 691
Author(s):  
Raquel Marchesan ◽  
Daniela Mendonça ◽  
Ana Carolina Caixeta Dias ◽  
Renata Carvalho da Silva ◽  
José Fernando Pereira ◽  
...  
Keyword(s):  
Heating Rate ◽  
Eucalyptus Grandis ◽  
Basic Density ◽  
Calorific Value ◽  
Fixed Carbon ◽  
Tree Plantation ◽  
Final Temperature ◽  
Good Energy ◽  
Eucalyptus Urograndis

The objective of this work was to determine the quality of the Eucalyptus urophilla x Eucalyptus grandis clone charcoal, defining the basic density and wood retractability, apparent density, breaking index, charcoal yield, condensable and non-condensable gas yield, AQI and calorific values, comparing the results of different trunk positions and in two different heating ramps, ramp 1 (R1) with a heating rate of 1.25 ºC/min, final temperature of 450ºC and total of 6 hours, and ramp 2 (R2) with a heating rate of 1.19 ºC/min, final temperature of 500ºC and total time of 7 hours. The six evaluated trees were from a six-year-old cloned tree plantation located in the municipality of Gurupi, in the south of Tocantins state. The specimens for the characterizations were made from wooden discs removed from three trunk positions (base, DBH, top). The Eucalyptus urograndis wood presented basic density considered average (0.47 g/cm³) and good dimensional stability. The charcoal presented an expected yield and high calorific value influenced by the final temperature of the heating ramps, high fixed carbon content, acceptable ash content, as well as a low breaking rate. The results were satisfactory and identified the species as a good energy source.

Defoliation by insects reduces the wood quality and cellulosic pulp production

Holzforschung ◽  
2020 ◽  
Vol 74 (5) ◽  
pp. 489-495
Author(s):  
Antonio José Vinha Zanuncio ◽  
Amélia Guimarães Carvalho ◽  
Mariane Bueno de Camargo ◽  
Flaviana Reis Milagres ◽  
Vinícius Resende de Castro ◽  
...  
Keyword(s):  
Wood Quality ◽  
Eucalyptus Grandis ◽  
Basic Density ◽  
Pulp Yield ◽  
Extractive Content ◽  
Eucalyptus Saligna ◽  
Wood Volume ◽  
Cellulosic Pulp ◽  
G Ratio ◽  
Pulp Production

AbstractDefoliating insects damage forest plantations, but the estimation of their losses does not take into account wood quality changes. The objective was to evaluate the wood quality and pulp production of two clones of Eucalyptus grandis × Eucalyptus urophylla (clone A) and Eucalyptus saligna (clone B) damaged or not by defoliating insects. Five healthy trees and five attacked by Gonipterus platensis Marelli (Coleoptera: Curculionidae) were selected per clone. The wood volume per hectare in the affected settlements was at least 9% lower and damaged trees showed lower wood basic density, with at least 4.6%. The lignin and extractive content in the wood increased by at least 5.6 and 45%, respectively, while the syringyl/guaiacyl (S/G) ratio remained constant for clone A and increased 10% for clone B. For pulps, an increased effective alkali and decreased pulp yield were experienced for both clones while bleaching or pulp quality was not affected. In the stands affected by defoliating insects, productivity was 9 and 19% lower considering the wood volume per hectare and 15 and 24% considering the cellulose pulp production per hectare, respectively.

scholarly journals Quality of wood and pulp from a clone of Eucalyptus grandis planted at three locations

CERNE ◽  
2011 ◽  
Vol 17 (1) ◽  
pp. 47-60 ◽  
Author(s):  
Cláudio Angeli Sansígolo ◽  
Éder da Silva Ramos
Keyword(s):  
Wood Quality ◽  
Eucalyptus Grandis ◽  
Basic Density ◽  
Chemical Properties ◽  
Matter Content ◽  
Raw Material ◽  
Low Fertility ◽  
Dry Matter Content ◽  
Chemical Analyses

Eucalyptus grandis is one of the most popular species to use as raw material for pulp production in Brazil, as it provides excellent pulping, bleaching and papermaking results. The main objective of this study is to examine the quality of wood and pulp from a clone of Eucalyptus grandis, at age 4 years approximately, planted in three different soils, two of which being low fertility and one being a superior fertility soil, and their reflections on wood quality and pulping results. Chemical analyses of the soils followed guidelines developed by Raij et al. (2001), while physical and chemical properties of the wood followed ABTCP, TAPPI and ABNT standards. Chemical analyses of the soils pointed to lower fertility in Fazenda Limeira and Fazenda Tapera Queimada as opposed to higher fertility in Fazenda Mendes União. Results revealed stronger tendencies for the stand grown in the less fertile soils (Fazenda Limeira and Fazenda Tapera Queimada) in comparison to the stand grown in more fertile soil (Fazenda Mendes União) as to: higher wood and bark basic density, lower height and dry matter content, higher bark content, lower extractives content and higher holocellulose content, higher total and screened yields from pulping, lower specific wood consumption/t of pulp, and higher tear and tensile indices at low refining levels.

scholarly journals Growth performance and wood quality of white jabon (Neolamarckia cadamba) progeny testing at Parung Panjang, Bogor, Indonesia

2019 ◽  
Vol 20 (8) ◽  
Author(s):  
Nurul Chaerani ◽  
DEDE J SUDRAJAT ◽  
ISKANDAR Z SIREGAR ◽  
ULFAH J SIREGAR
Keyword(s):  
Specific Gravity ◽  
Moisture Content ◽  
Growth Performance ◽  
Wood Density ◽  
Block Design ◽  
Wood Quality ◽  
Basic Density ◽  
Progeny Testing ◽  
Pilodyn Penetration

Abstract. Chaerani N, Sudrajat DJ, Siregar IZ, Siregar UJ. 2019. Growth performance and wood quality of white jabon (Neolamarckia cadamba) progeny testing at Parung Panjang, Bogor, Indonesia. Biodiversitas 20: 2295-2301. The aim of this study was to evaluate the genetic parameters of growth and wood quality in white jabon progeny test at 54 months old in Parung Panjang, Bogor. The 105 half-sib families obtained from 12 provenances were evaluated in a randomized complete block design with five replications. Wood quality was assessed both in a non-destructive way using a pilodyn and by destructive method using wood sample taker. Results indicated that the mean value ranged from 5.10 to 10.15 m for height, 6.67 to 15.30 cm for diameter, 2.30 to 3.62 cm for pilodyn penetration, 0.66 to 0.82 g/cm3 for wood density, 0.33 to 0.50 for specific gravity, and 66 to 111 % for moisture content, respectively. There were significant differences among 105 families for all traits except moisture content. The high heritability estimate was found for height (0.4-0.69) and basic density (0.27-0.59). Applying 80% selection intensity on diameter and leaving 84 best families in each block will produce a high total genetic gain. Pilodyn penetration had negative correlation with diameter, wood density, and specific gravity.

scholarly journals AVALIAÇÃO DE TRÊS MADEIRAS NATIVAS DO CERRADO GOIANO VISANDO À UTILIZAÇÃO ENERGÉTICA

Nativa ◽  
2020 ◽  
Vol 8 (5) ◽  
pp. 615-624
Author(s):  
Humberto Fauller De Siqueira ◽  
Evelym Poliana Santos Patrício ◽  
Michael Douglas Roque Lima ◽  
José Benedito Guimarães Junior ◽  
Angélica de Cássia Oliveira Carneiro ◽  
...  
Keyword(s):  
Native Species ◽  
Basic Density ◽  
Ash Content ◽  
Muffle Furnace ◽  
Fixed Carbon ◽  
Energy Potential ◽  
Final Temperature ◽  
Wood Basic Density ◽  
Longitudinal Position

Estudos que visem ampliar o conhecimento das madeiras oriundas do cerrado podem contribuir com o correto manejo das espécies. O objetivo deste estudo foi avaliar a qualidade da madeira e do carvão vegetal de três espécies do cerrado (Tachigali vulgaris, Myracrodruon urundeuva e Amburana cearensis) para fins energéticos. Foram amostradas duas árvores por espécie e, destas, foram retirados discos da base, a 25, 50, 75 e 100% da altura total. Para a madeira, determinou-se longitudinalmente a densidade básica, composição química, estoque de carbono, poderes caloríficos superior (PCS) e inferior (PCI) e densidade energética. As carbonizações da madeira foram realizadas em forno elétrico, com temperatura final de 450 ºC e taxa de aquecimento de 1,67 ºC.min-1. A posição longitudinal de amostragem não influenciou a densidade da madeira. A madeira de M. urundeuva apresentou maior densidade básica e PCS, bem como menor teor de materiais voláteis. O carvão da espécie T. vulgaris apresentou a menor densidade aparente (298 kg.m-3) e baixo teor de cinzas (1,14%), porém elevado teor de carbono fixo e PCS. O carvão vegetal da espécie M. urundeuva se destacou com elevada densidade relativa aparente (475 kg.m-3). A ordem das melhores espécies é: M. urundeuva, A. cearensis e T. vulgaris. Palavras-chave: energia renovável; espécies nativas; potencial energético; qualidade do carvão.   ASSESSMENT OF THREE NATIVE WOODS FROM CERRADO OF GOIÁS FOR THE ENERGY PURPOSES   ABSTRACT: Studies aimed at expanding the knowledge of woods from cerrado can contribute to the correct management of the species. The aim of this study was to evaluate the quality of wood and charcoal of three species from cerrado (Tachigali vulgaris, Myracrodruon urundeuva, and Amburana cearensis) for energy purposes. Two trees per species were sampled and, from these, disks were removed from the base, at 25, 50, 75, and 100% of the total height. For wood, the properties basic density, chemical analysis, carbon stock, higher (HHV) and lower (LHV) heating values were determined longitudinally. Carbonizations were carried out in a muffle furnace with a final temperature of 450 ºC and heating rate of 1.67 ºC.min-1. There was no effect of longitudinal position under the wood basic density. Myracrodruon urundeuva wood had the highest basic density and HHV, as well as the lowest content of volatile matters. The Tachigali vulgaris charcoal had the lowest bulk density (298 kg.m-3) and low ash content (1.14%), but a high content of fixed carbon and HHV. Charcoal of the species M. urundeuva stood out with high apparent relative density (475 kg.m-3). The order of the best species is M. urundeuva, A. cearensis, and T. vulgaris. Keywords: renewable energy; native species; energy potential; charcoal quality.

scholarly journals BIOMASS AND ENERGY PRODUCTION AT SHORT ROTATION Eucalyptus CLONAL PLANTATIONS DEPLOYED IN RIO GRANDE DO NORTE1

2017 ◽  
Vol 41 (5) ◽  
Author(s):  
Maraísa Costa Ferreira ◽  
Rosimeire Cavalcante dos Santos ◽  
Renato Vinícius Oliveira Castro ◽  
Angélica de Cássia Oliveira Carneiro ◽  
Gualter Guenther Costa da Silva ◽  
...  
Keyword(s):  
Energy Demand ◽  
Wood Quality ◽  
Forest Biomass ◽  
Eucalyptus Grandis ◽  
Basic Density ◽  
Tree Height ◽  
Volumetric Growth ◽  
Energy Productivity ◽  
Short Rotation ◽  
Calorific Power

ABSTRACT This study aimed to estimate the biomass and energy of a clonal planting short rotation experiment with hybrids of Eucalyptus urophylla ST Blake x Eucalyptus grandis (Hill) Maiden, deployed in 3 m x 3 m spacing, at the Academic Unit Specialized in Agricultural Sciences, Macaíba/RN. The analysis were performed at the Laboratory Panels and Wood Energy, Federal University of Viçosa, in which the following ratings on wood three cultivars (GG100 ; AEC0144 and AEC0224) were performed: determination of basic density, high calorific power, chemical analysis, thermogravimetric analysis and subsequent calculations for estimating the mass production and energy were performed. The base (10 cm from the ground), the third and two thirds of commercial tree height: composed for analysis, taken from three points along the stem samples were used. The design of the experiment was a completely randomized. Data were subjected to analysis of variance and the means were compared by Tukey test (a= 0.05). The clone who excelled in the first year of planting was the GG100 with 11,805 kW.h.ha-1 of energy productivity, followed by clone AEC0224 (6,755 kW.h.ha-1) and AEC0144 (4,405 kW.h.ha-1). The performance of this clone was due to mainly the higher volumetric growth. The wood quality among clones showed little difference. It should stimulate the deployments of species of short rotation in the state of RN to supply the elevated energy demand of forest biomass in the region.

scholarly journals Growth, biomass, and energy quality of Acacia mangium timber grown at different spacings

2018 ◽  
Vol 53 (7) ◽  
pp. 791-799 ◽  
Author(s):  
Helio Tonini ◽  
Dalton Roberto Schwengber ◽  
Marina Moura Morales ◽  
Ciro Augusto de Souza Magalhães ◽  
Jane Maria Franco de Oliveira
Keyword(s):  
Block Design ◽  
Wood Quality ◽  
Basic Density ◽  
Acacia Mangium ◽  
Calorific Value ◽  
Individual Growth ◽  
Energy Potential ◽  
Volume Yield ◽  
Rotation Age

Abstract: The objective of this work was to assess the effect of spacing on the growth, biomass allocation, and wood quality for energy purposes of Acacia magium. A randomized complete block design was carried out with three replicates and five treatments consisting of trees planted at different spacings: 2.0x2.0, 2.5x2.5, 3.0x2.0, 3.0x2.5, and 3.0x3.0 m. At 67 months after planting, the following species parameters were evaluated: performance (mortality, diameter growth, height, bark factor, and bark and biomass volume yield) and wood energy quality (basic density, higher-calorific value, ash, fixed carbon, and volatile materials) through the analysis of variance. Plant spacing did not affect volume and biomass production per hectare nor wood quality for energy purposes. The widest spacing (3.0x3.0 m) provides better individual growth, and the narrowest one (2.0x2.0 m) produces smaller trees, but with the highest percentage of dry biomass in the trunk, and can show the best energy potential at a rotation age from 40 to 50 months.

scholarly journals THE EFFECT OF THE COMPOSITION OF MIXTURES OF CONDENSED FRACTIONS OF A VENEZUELAN RESIDUE ON THE QUALITY OF THE PRODUCTS OBTAINED FROM DELAYED COKING

2019 ◽  
Vol 50 (1) ◽  
pp. 1-6
Author(s):  
Alejandra Meza ◽  
A. Nava ◽  
J. Velazquez ◽  
Narciso Andres Perez Santodomingo ◽  
G. Rincón
Keyword(s):  
Laboratory Scale ◽  
Chemical Characteristics ◽  
Vacuum Residue ◽  
Fixed Carbon ◽  
Volatile Material ◽  
Delayed Coking ◽  
Quality Of Products ◽  
The Impact ◽  
Effect Of The Composition

The effect of the composition of resin and asphaltene on the quality of products obtained from delayed coking was evaluated. 10 mixtures with a controlled composition of S.A.R.A. (Saturates, Aromatic, Resin, Asphaltene) fractions with high percentage of resin and asphaltene, from a vacuum residue of Venezuelan crude commercially known as “Merey”, were processed in a delayed coking unit at laboratory scale. The physic-chemical characteristics of the mixtures and products (distilled and coke) were obtained. Results indicate that on increasing the resin and asphaltene content, there is a decrease in the content of volatile material and an increase in fixed carbon and ash. Metal and sulphur content were found in a lesser proportion in coke from the mixtures rich in resin while said content was higher for the mixtures rich in asphaltene. This showed the impact that the S.A.R.A composition of the feed has on the quality of the products obtained.

Sign in / Sign up

Export Citation Format

Share Document