scholarly journals A Stochastic Model for the Fractal Dimension Estimation of Asphaltenes Aggregation

2019 ◽  
Vol 8 (6) ◽  
pp. 1992-1995
Keyword(s):  
Surface Roughness ◽  
Fractal Dimension ◽  
Stochastic Model ◽  
Production Systems ◽  
Experimental Results ◽  
Crude Oils ◽  
Dimension Estimation ◽  
Maximum Value ◽  
Solids Deposition

Some of the problems associated with the transportation of crude oils are due to the presence of heavy compounds as asphaltene molecules. This work developed a stochastic model that predicts the fractal dimension of the asphaltene aggregates. It was found that the maximum value of the fractal dimension is 1.71, which corresponds to the reported experimental results. The model can be applied as a universal growing behavior for the analysis of surface roughness when solids deposition is observed in the production systems involving crude oils

ANALYSIS OF SURFACE ROUGHNESS AT OVERLAPPING LASER SHOCK PEENING

2016 ◽  
Vol 23 (03) ◽  
pp. 1650012 ◽  
Author(s):  
F. Z. DAI ◽  
Z. D. ZHANG ◽  
J. Z. ZHOU ◽  
J. Z. LU ◽  
Y. K. ZHANG
Keyword(s):  
Surface Roughness ◽  
Theoretical Analysis ◽  
Equilateral Triangle ◽  
Experimental Results ◽  
Laser Shock Peening ◽  
Laser Shock ◽  
Minimum Value ◽  
Maximum Value ◽  
Shock Peening ◽  
Iso 25178

The overlapping effects on surface roughness are studied when samples are treated by laser shock peening (LSP). Surface roughness of overlapped circular laser spot is calculated by ISO 25178 height parameters. The usually used overlapping styles namely isosceles-right-triangle-style (AAP) and equilateral-triangle-style (AAA) are carefully investigated when the overlapping degree in x-axis ([Formula: see text]) is below 50%. Surface roughness of isosceles-right-triangle-style attains its minimum value at [Formula: see text] of 29.3%, and attains its maximum value at [Formula: see text] of 43.6%. Surface roughness of equilateral-triangle-style attains its minimum value at [Formula: see text] of 42.3%, and attains its maximum value at [Formula: see text] of 32%. Experimental results are well consistent with theoretical analysis.

Optimal Density Determination of Bouguer Anomaly Using Fractal Analysis (Case of study: Charak area,IRAN)

2005 ◽  
Vol 1 (1) ◽  
pp. 21-24
Author(s):  
Hamid Reza Samadi
Keyword(s):  
Surface Roughness ◽  
Fractal Dimension ◽  
Fractal Analysis ◽  
Fractal Geometry ◽  
Host Rock ◽  
Bouguer Anomaly ◽  
Research Area ◽  
Density Difference ◽  
Optimal Density

In exploration geophysics the main and initial aim is to determine density of under-research goals which have certain density difference with the host rock. Therefore, we state a method in this paper to determine the density of bouguer plate, the so-called variogram method based on fractal geometry. This method is based on minimizing surface roughness of bouguer anomaly. The fractal dimension of surface has been used as surface roughness of bouguer anomaly. Using this method, the optimal density of Charak area insouth of Hormozgan province can be determined which is 2/7 g/cfor the under-research area. This determined density has been used to correct and investigate its results about the isostasy of the studied area and results well-coincided with the geology of the area and dug exploratory holes in the text area

Spatial Social Choice

2019 ◽  
pp. 207-244
Author(s):  
Norman Schofield
Keyword(s):  
United States ◽  
Stochastic Model ◽  
Social Choice ◽  
Spatial Models ◽  
The United States ◽  
Multinomial Logit ◽  
Experimental Results ◽  
The Core ◽  
Voting Game ◽  
Voter Choice

A key concept of social choice is the idea of the Condorcet point or core. For example, consider a voting game with four participants so any three will win. If voters have Euclidean preferences, then the point at the center will be unbeaten. Earlier spatial models of social choice focused on deterministic voter choice. However, it is clear that voter choice is intrinsically stochastic. This chapter employs a stochastic model based on multinomial logit to examine whether parties in electoral competition tend to converge toward the electoral center or respond to activist pressure to adopt more polarized policies. The chapter discusses experimental results of the idea of the core explores empirical analyses of elections in Israel and the United States.

Yaw Galloping of a TLWP Platform Under High Speed Currents by Analytical Methods and its Comparison With Experimental Results

2017 ◽  
Author(s):  
Francisco Lamas ◽  
Miguel A. M. Ramirez ◽  
Antonio Carlos Fernandes
Keyword(s):  
High Speed ◽  
Production Systems ◽  
Experimental Tests ◽  
Experimental Results ◽  
Analytical Methodology ◽  
New Approach ◽  
Laboratory Facilities ◽  
Polynomial Curve ◽  
Computational Fluid Dynamics Cfd ◽  
Cfd Analyses

Flow Induced Motions are always an important subject during both design and operational phases of an offshore platform life. These motions could significantly affect the performance of the platform, including its mooring and oil production systems. These kind of analyses are performed using basically two different approaches: experimental tests with reduced models and, more recently, with Computational Fluid Dynamics (CFD) dynamic analysis. The main objective of this work is to present a new approach, based on an analytical methodology using static CFD analyses to estimate the response on yaw motions of a Tension Leg Wellhead Platform on one of the several types of motions that can be classified as flow-induced motions, known as galloping. The first step is to review the equations that govern the yaw motions of an ocean platform when subjected to currents from different angles of attack. The yaw moment coefficients will be obtained using CFD steady-state analysis, on which the yaw moments will be calculated for several angles of attack, placed around the central angle where the analysis is being carried out. Having the force coefficients plotted against the angle values, we can adjust a polynomial curve around each analysis point in order to evaluate the amplitude of the yaw motion using a limit cycle approach. Other properties of the system which are flow-dependent, such as damping and added mass, will also be estimated using CFD. The last part of this work consists in comparing the analytical results with experimental results obtained at the LOC/COPPE-UFRJ laboratory facilities.

scholarly journals Effect of tillage, slope, and rainfall on soil surface microtopography quantified by geostatistical and fractal indices during sheet erosion

2020 ◽  
Vol 12 (1) ◽  
pp. 232-241
Author(s):  
Na Ta ◽  
Chutian Zhang ◽  
Hongru Ding ◽  
Qingfeng Zhang
Keyword(s):  
Surface Roughness ◽  
Fractal Dimension ◽  
Soil Surface ◽  
Rainfall Events ◽  
Tillage Practices ◽  
Surface Microtopography ◽  
Artificial Rainfall ◽  
Soil Surface Roughness ◽  
The Difference ◽  
Sheet Erosion

AbstractTillage and slope will influence soil surface roughness that changes during rainfall events. This study tests this effect under controlled conditions quantified by geostatistical and fractal indices. When four commonly adopted tillage practices, namely, artificial backhoe (AB), artificial digging (AD), contour tillage (CT), and linear slope (CK), were prepared on soil surfaces at 2 × 1 × 0.5 m soil pans at 5°, 10°, or 20° slope gradients, artificial rainfall with an intensity of 60 or 90 mm h−1 was applied to it. Measurements of the difference in elevation points of the surface profiles were taken before rainfall and after rainfall events for sheet erosion. Tillage practices had a relationship with fractal indices that the surface treated with CT exhibited the biggest fractal dimension D value, followed by the surfaces AD, AB, and CK. Surfaces under a stronger rainfall tended to have a greater D value. Tillage treatments affected anisotropy differently and the surface CT had the strongest effect on anisotropy, followed by the surfaces AD, AB, and CK. A steeper surface would have less effect on anisotropy. Since the surface CT had the strongest effect on spatial variability or the weakest spatial autocorrelation, it had the smallest effect on runoff and sediment yield. Therefore, tillage CT could make a better tillage practice of conserving water and soil. Simultaneously, changes in semivariogram and fractal parameters for surface roughness were examined and evaluated. Fractal parameter – crossover length l – is more sensitive than fractal dimension D to rainfall action to describe vertical differences in soil surface roughness evolution.

Reactive Ion Etching Induced Surface Damage of Silicon Carbide

2005 ◽  
Vol 483-485 ◽  
pp. 765-768 ◽  
Author(s):  
Jun Hai Xia ◽  
E. Rusli ◽  
R. Gopalakrishnan ◽  
S.F. Choy ◽  
Chin Che Tin ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Reactive Ion Etching ◽  
Surface Damage ◽  
Textured Surface ◽  
Rf Power ◽  
Power Devices ◽  
Ion Etching ◽  
Maximum Value ◽  
Wide Range ◽  
Coarse Surface

Reactive ion etching of SiC induced surface damage, e.g., micromasking effect induced coarse and textured surface, is one of the main concerns in the fabrication of SiC based power devices [1]. Based on CHF3 + O2 plasma, 4H-SiC was etched under a wide range of RF power. Extreme coarse and textured etched surfaces were observed under certain etching conditions. A super-linear relationship was found between the surface roughness and RF power when the latter was varied from 40 to 160 W. A further increase in the RF power to 200 W caused the surface roughness to drop abruptly from its maximum value of 182.4 nm to its minimum value of 1.3 nm. Auger electron spectroscopy (AES) results revealed that besides the Al micromasking effect, the carbon residue that formed a carbon-rich layer, could also play a significant role in affecting the surface roughness. Based on the AES results, an alternative explanation on the origin of the coarse surface is proposed.

Influence of surface roughness on the wetting angle

1995 ◽  
Vol 10 (8) ◽  
pp. 1984-1992 ◽  
Author(s):  
X.B. Zhou ◽  
J.Th.M. De Hosson
Keyword(s):  
Surface Roughness ◽  
Gaussian Distribution ◽  
Rough Surfaces ◽  
Contact Angles ◽  
Wetting Angle ◽  
Experimental Results ◽  
Solid Surfaces ◽  
Roughness Measurements

A this paper the influence of surface roughness on contact angles in the system of liquid Al wetting solid surfaces of Al2O3 has been studied. It was observed that contact angles of liquid Al vary significantly on different rough surfaces of Al2O3. A model is proposed to correlate contact angles with conventional roughness measurements and wavelengths by assuming a cosine profile of rough grooves with a Gaussian distribution of amplitudes. In comparison with the experimental results, the model provides a good estimate for describing the influence of surface roughness on contact angles of liquid Al on Al2O3.

Principle and structure of a multi-chamber piezoelectric pump with large flow rate integrated into printed circuit board

2022 ◽  
pp. 1045389X2110721
Author(s):  
Yun-Hao Peng ◽  
Dai-Hua Wang ◽  
Lian-Kai Tang
Keyword(s):  
Flow Rate ◽  
Compression Ratio ◽  
Layer Structure ◽  
Experimental Results ◽  
Processing Technology ◽  
Rate Model ◽  
Piezoelectric Pump ◽  
Central Deflection ◽  
Maximum Value ◽  
Large Flow

Parametric simulation of multi-chamber piezoelectric pump proposed by authors shows that its flow rate is positively correlated with chamber compression ratio when height of chamber wall is not less than central deflection of circular piezoelectric unimorph actuator (CPUA). Therefore, in this paper, principle and structure of multi-chamber piezoelectric pump with novel CPUAs with three-layer structure are proposed and realized, so as to improve its chamber compression ratio, and then improve its flow rate. Its processing technology compatible with PCB processing technology is studied and its flow rate model is established. Central deflection of CPUA with three-layer structure and the flow rate characteristics are tested. Experimental results show that when the central deflection of CPUA with three-layer structure reaches the maximum value of 106.8 μm, the chamber compression ratio and flow rate of multi-chamber piezoelectric pump reach the maximum value of 50% and 3.11 mL/min, respectively. The maximum flow rate is increased by 622% compared to unimproved pump. By comparing experimental results with numerical and finite element simulation results, the realized multi-chamber piezoelectric pump has large flow rate and the established flow rate model can predict its flow rate.

Research on Tool Wear Based on Texture Fractal Dimension

2011 ◽  
Vol 66-68 ◽  
pp. 1163-1166
Author(s):  
Mao Jun Chen ◽  
Zhong Jin Ni ◽  
Liang Fang
Keyword(s):  
Fractal Dimension ◽  
Tool Wear ◽  
Surface Texture ◽  
Manufacturing Systems ◽  
Experimental Results ◽  
Machining Process ◽  
Work Piece ◽  
Automated Manufacturing ◽  
Automated Manufacturing Systems ◽  
Wear Condition

In automated manufacturing systems, one of the most important issues is the detection of tool wear during the machining process. The Hausdorff-Besicovitch (HB) dimension is used to analyze the feature of the surface texture of work-piece in this paper. The value of the fractal dimension of the work-piece surface texture tends to decrease with the machining process, due to the texture becoming more complex and irregular, and the tool wear is also becoming more and more serious. That can describe the inherent relationship between work-piece surface texture and tool wear. The experimental results demonstrate the probability of using the fractal dimension of work-piece surface texture to monitor the tool wear condition.

Sign in / Sign up

Export Citation Format

Share Document