scholarly journals Design a Prototype for Detecting Abnormalities in Heart Rhythm by Applying Technological Interventions

2019 ◽  
Vol 9 (1) ◽  
pp. 2265-2268
Keyword(s):  
Internet Of Things ◽  
Heart Rhythm ◽  
Patient Data ◽  
Heart Beat ◽  
Raspberry Pi ◽  
Technological Interventions ◽  
Arduino Uno ◽  
Python Programming

This paper demonstrates the basic dialogue for heart rhythm examination of arrhythmia patients who’s heart beat is conventionally irregular. In this approach, designed a device which supervises and record the heart beat by evaluating the PQRS complexes. Despite the fact as alone, there are many ECG devices which examine the heart rhythm but they are little precise because, firstly they are not taking the live data for analysis of PQRS complexes inspite many hospital clinic’s are taking pre-loaded heart rhythm from few days and months and analysis is done on the data either by mathematical theorems or else by using other techniques like wavelet theorem, matlab etc. Here, focus is mainly on analysis of pqrs complexes from live data. Internet of things is been far-flung technology in extant days. So by IoT the heart rhythm and PQRS values are been displaying on web so that doctor monitor patient data up-to-date from anywhere and at any time. The device has been implemented and evaluated by using the Heart beat sensor AD8232, Raspberry Pi 3 b board, Arduino Uno, Python programming.

scholarly journals Sistem Kendali Dan Pengawasan Wilayah Pintu Berbasis IoT

2019 ◽  
Vol 2 (2) ◽  
pp. 101
Author(s):  
Arnes Sembiring
Keyword(s):  
Internet Of Things ◽  
Real Time ◽  
Video Streaming ◽  
Streaming Video ◽  
Security System ◽  
Raspberry Pi ◽  
The Internet ◽  
Web Pages ◽  
Arduino Uno

Abstract - In this study, an IoT-based door security system was proposed which facilitated homeowners to open and close doors and unlock doors through the internet. The system is also equipped with a real time video streaming feature so that the owner can save the environment around the door and ensure the person at the door before opening it. The Raspberry Pi is used as the main controller of the system that provides web pages for users and signatories to access Arduino Uno boards. Arduino Uno controls the servo to control the door. The camera used in this study is a Raspberry Camera with 5 MP resolution. From the results of the tests carried out, the results of the system that have been made can work well. Expected full service and response to changes in users on web pages is also quite fast. Streaming video runs smoothly at 30 fps with a resolution of 640x480.Keywords - Raspberry Pi, Streaming Video, Internet of Things, Door Control 

scholarly journals Internet Of Things (Iot) Light Control System Using a Mobile-Based Raspberry Pi

2020 ◽  
Vol 2 (1) ◽  
pp. 46-53
Author(s):  
Azim Ben ◽  
Embara Adly ◽  
Devia Hasannah
Keyword(s):  
Internet Of Things ◽  
Computer Network ◽  
Control Process ◽  
Control Device ◽  
Internet Technology ◽  
Raspberry Pi ◽  
Light Control ◽  
Turn On ◽  
Python Programming ◽  
Internet Of Thing

Internet of thing (IoT) is a concept that aims to expand the benefits of internet connectivity that is connected continuously. Internet of things (IoT) can be used in buildings to control electronic equipment such as room lights that can be operated remotely via a computer network. This study aims to build a remote control device by utilizing internet technology to carry out the mobile-based light control process. The research was conducted by building a prototype and mobile-based application using the python programming language. In this study, there is a control feature, namely one light control which is used to turn on one lamp and two controls used to turn on the lamp simultaneously.

Fast Tracking of Detection Offenders Smoking Zone Menggunakan Sensor MQ-2 Berbasis Internet of Things

2018 ◽  
Vol 10 (1) ◽  
pp. 5-8
Author(s):  
Fredy Susanto ◽  
Syafnidawati Syafnidawati
Keyword(s):  
Internet Of Things ◽  
Human Health ◽  
Raspberry Pi ◽  
Programming Technique ◽  
Supervision System ◽  
Fast Tracking ◽  
Free Zone ◽  
Index Terms ◽  
Smoke Sensor ◽  
Python Programming

With the increasing violations by smokers in free zone cigarettes, very affecting for human health cigarettes or not smokers. So that designed a supervision system to reduce the number of violations by smokers. The system is based on the aimed to detect and provide a warning to smokers that the room cannot be cigarettes if breaking will be imposed sanctions. This system is made up of hardware, consists of smoke sensor base their MQ2, Camera C270 and Raspberry pi. This system created by the language of Python programming technique. How this appliance if violations by smokers, when smoke is detected then the webcam will take pictures of the offenders and the results of the photo will be sent automatically to the email, if the results of the photo has been sent to email and alert sound alarm will be active and a notification that in the area cannot be cigarettes. The results of the design of this system is not only to detect and provide a notification only, but it also has been able to give a warning and evidence of who is a breach in the zone. Index Terms— Smoke sensor, MQ-2, raspberry pi

scholarly journals Internet of Things(IoT) Based Multilevel Drunken Driving Detection and Prevention System Using Raspberry Pi 3

2020 ◽  
Author(s):  
Viswanatha V ◽  
Venkata Siva Reddy R ◽  
Ashwini Kumari P ◽  
Pradeep kumar S
Keyword(s):  
Internet Of Things ◽  
Alcohol Intake ◽  
Heart Beat ◽  
The Body ◽  
Raspberry Pi ◽  
Ignition System ◽  
Prevention System ◽  
Heart Beat Rate ◽  
Drunken Driving ◽  
Death Cases

In this paper, the proposed system has demonstrated three ways of detecting alcohol level in the body of the car driver and prevent car driver from driving the vehicle by turning off the ignition system. It also sends messages to concerned people. In order to detect breath alcohol level MQ-3 sensor is included in this module along with heartbeat sensor which can detect the heart beat rate of driver, facial recognition using webcam & MATLAB and a Wi-Fi module to send a message through the TCP/IP App, a Raspberry pi module to turn off the ignition and an alarm as prevention module. If a driver alcohol intake is more than the prescribed range, set by government the ignition will be made off provided either his heart beat abnormal or the driver is drowsy. In both the cases there will be a message sent to the App and from the App you can send it to family, friend, and well-wisher or nearest cop for the help. The system is developed considering the fact if driver is drunk and he needs a help, his friend can drive the car if he is not drunk. The safety of both the driver and the surroundings are aimed by this system and this aids in minimizing death cases by drunken driving and also burden on the cops.

Development of hardware and software system for access control and management

Ergodesign ◽  
2020 ◽  
Vol 2020 (1) ◽  
pp. 19-24
Author(s):  
Igor Pestov ◽  
Polina Shinkareva ◽  
Sofia Kosheleva ◽  
Maxim Burmistrov
Keyword(s):  
Access Control ◽  
High Mobility ◽  
Raspberry Pi ◽  
Software System ◽  
Hardware System ◽  
Software And Hardware ◽  
Arduino Uno ◽  
Control And Management ◽  
Hardware Platforms ◽  
Hardware And Software System

This article aims to develop a hardware-software system for access control and management based on the hardware platforms Arduino Uno and Raspberry Pi. The developed software and hardware system is designed to collect data and store them in the database. The presented complex can be carried and used anywhere, which explains its high mobility.

Medidor Inteligente de Energía Eléctrica utilizando la Tarjeta Electrónica Raspberry Pi

2018 ◽  
Vol 14 (1) ◽  
Author(s):  
L.F. Tipán ◽  
J.A. Rumipamba
Keyword(s):  
Raspberry Pi ◽  
El Sistema ◽  
Arduino Uno

El objeto de este documento es presentar un medidor de energia electrica inteligente con raspberry Pi y Arduino UNO, para visualizar el consumo electrico aproximado de un hogar tipo en tiempo real, mediante una aplicación Android y servidor web en la raspberry utilizando hojas de calculo en linea de google, porque aproximado debido a que no se hace un muestreo de voltaje sino que en base a parametros definidos se emplean valores establecidos. En la presente investigacion se muestra la arquitectura base y la metodologia empleada demostrando que los datos obtenidos con este sistema propuesto es muy parecido en comparacion con un sistema que se encuentra disponible en el mercado, especialmente europeo y norteamericano como lo es el sistema AEOTEC que utiliza protocolos z wave.

RANCANG BANGUN INTERNET OF THINGS SERVER DENGAN MENGGUNAKAN ACTIVEMQ ARTEMIS UNTUK MITIGASI BENCANA DI RASPBERRY PI 3

Transmisi ◽  
2020 ◽  
Vol 22 (4) ◽  
pp. 117-122
Author(s):  
Sadr Lufti Mufreni ◽  
Esi Putri Silmina
Keyword(s):  
Internet Of Things ◽  
Embedded System ◽  
Raspberry Pi

Indonesia merupakan negara kepulauan yang mempunyai lebih dari 13.000 pulau. Wilayahnya terletak di antara Samudera Hindia dan Samudera Pasifik dan dilewati oleh Pacific Ring of Fire sehingga banyak gunung berapi aktif. Berdasarkan letak geografis mempunyai potensi tsunami dan gempa bumi cukup tinggi. Diperlukan rencana penanggulangan bencana yang baik untuk menekan risiko yang bisa terjadi, salah satunya dengan mitigasi bencana. Mitigasi bencana adalah serangkaian upaya untuk mengurangi risiko bencana, baik melalui pembangunan fisik maupun penyadaran dan peningkatan kemampuan menghadapi ancaman bencana. Mitigasi bencana diperlukan untuk mengurangi dampak yang ditimbulkan terutama korban jiwa. Salah satunya dengan menggunakan sistem peringatan dini. Sistem peringatan dini terdiri dari 3 komponen utama yaitu sensor untuk mendapatkan nilai dari suatu lingkungan, controller untuk mengolah nilai yang diterima, dan aksi yang dilakukan berdasarkan hasil dari pengolahan. Untuk membuat sistem yang efektif diperlukan komunikasi yang memadai. Messaging queue digunakan oleh industri untuk komunikasi antar perangkat lunak, perangkat keras, dan embedded system. Penelitian berfokus pada penggunaan ActiveMQ Artemis sebagai messaging queue sebagai server untuk komunikasi dengan internet of things (IoT). Keunggulan ActiveMQ Artemis dapat dijalankan di Raspberry Pi 3 dengan sedikit modifikasi. Hasil penelitian membuktikan bahwa ActiveMQ Artemis dapat digunakan untuk komunikasi IoT pada simulasi sistem mitigasi bencana.

scholarly journals COVID-19 Authorized Entry with Face Mask Detection using Raspberry Pi

2021 ◽  
Vol 9 (VI) ◽  
pp. 1862-1867
Author(s):  
Anju Ajay
Keyword(s):  
Large Scale ◽  
Facial Recognition ◽  
Face Mask ◽  
Raspberry Pi ◽  
Wireless Internet ◽  
Great Demand ◽  
Embedded Device ◽  
Internet Connection ◽  
Battery Power ◽  
Python Programming

There are no effective face mask detection applications in the current COVID-19 scenario, which is in great demand for transportation, densely populated places, residential districts, large-scale manufacturers, and other organizations to ensure safety. In addition, the lack of big datasets of photographs with mask has made this task more difficult. With the use of Python programming, the Open CV library, Keras, and tensor flow, this project presents a way for recognizing persons without wearing a face mask using the facial recognition methodology. This is a self-contained embedded device that was created with the Raspberry Pi Electronic Development Board and runs on battery power. We make use of a wireless internet connection using USB modem. In comparison to other existing systems, our proposed method is more effective, reliable, and consumes significantly less data and electricity

Sign in / Sign up

Export Citation Format

Share Document