scholarly journals Seismic Behaviour of Offshore Steel Jacket Platform Braced in Horizontal and Vertical Planes

2019 ◽  
Vol 8 (12) ◽  
pp. 1947-1953
Keyword(s):  
Seismic Analysis ◽  
Response Spectrum ◽  
Vertical Plane ◽  
Static Method ◽  
Base Shear ◽  
Response Spectrum Method ◽  
Seismic Behaviour ◽  
Jacket Platform ◽  
Spectrum Method ◽  
Time Period

The offshore jacket platforms are primarily installed in the large oceans mainly for drilling the crude oil, carbohydrates and production of electricity. The current studies emphasize on the structural performance of offshore deck jacket platform with different bracing systems. Earthquake analysis has been performed to calculate the seismic responses, with the help of bracings to control the seismic induced vibrations of the jacket platforms. For this study, a jacket platform made up of steel members has been modeled and then analyzed under earthquake and wave loadings. This paper mainly deals to compute and compare the seismic behavior of offshore steel deck platform using SAP 2000 v20 software with bracing in the horizontal plane and bracing in both horizontal and vertical planes. The total number of 8 models has been analyzed in the SAP2000 software with bracing i.e. X, V, Inverted V and K in the vertical plane and bracing i.e. X, V, Inverted V and K in both horizontal and vertical plane. A relative study has been carried out in Time period, deck displacement and base shear. Seismic analysis using linear static, i.e. Equivalent static method (ESA) and linear dynamic, i.e. Response spectrum method (RSA) has been performed. Further deck displacement, time period and base shear are determined by Equivalent static method and Response spectrum method for various types of bracing models in both horizontal and vertical planes. Among the all various types of bracing models, Inverted V bracing in the vertical plane is found to be the optimum model among all other models.

scholarly journals Seismic Analysis of a Residential Building Considering Different Types of Opening Arrangement in the Infill Wall

2021 ◽  
Vol 9 (10) ◽  
pp. 649-656
Author(s):  
Kapil Shankar Soni
Keyword(s):  
Failure Modes ◽  
Seismic Analysis ◽  
Response Spectrum ◽  
Residential Building ◽  
Base Shear ◽  
Seismic Behaviour ◽  
Infill Wall ◽  
Infill Walls ◽  
Time Period ◽  
Natural Time

Abstract: Infill walls are inevitable components of any structure to create dispassion between interior space and external condition. In general, there are some prevalent openings inside the infill walls because of practical needs, architectural observations or aesthetic inspections. In current design practice, strength and inflexibility contribution of infill walls aren't thought of. However, the presence of infill walls may impact the seismic reaction of structures exposed to earthquake loads and cause a conduct which is not the same as that estimated for a bare frame. Additionally, partial openings inside infill walls are significant parameter prompting the seismic behaviour of infilled frames in this manner retreating lateral stiffness and strength. In this study is proposed to compare various models of buildings considering the openings (10% of surface area) at different locations in the infill walls for the seismic behaviour. A G+13 residential building is considered in Zone III with soil type II and analysis is carried out by Response Spectrum Method. Various parameters are considered such as Natural Time period, Base shear, Storey displacement, Storey drift and Storey stiffness were studied. The comparative study could simplify designers and code developers in selecting and recommending appropriate analytical models for estimating strength, stiffness, failure modes and other properties of infill frames with openings. Keywords: Residential Building, Openings Infill Wall, ETAB Software, Natural Time Period, Base Shear, Storey Shear, Storey Displacement, Storey Drift, Storey Stiffness.

scholarly journals Performannce Base Analysis of Multy Storied Building

2021 ◽  
Vol 9 (8) ◽  
pp. 2053-2062
Author(s):  
Kunwer Fahmed Alam Ariyana
Keyword(s):  
Response Spectrum ◽  
Pushover Analysis ◽  
Horizontal Load ◽  
Base Shear ◽  
Response Spectrum Method ◽  
Spectrum Method ◽  
Linear Approach ◽  
Time Period ◽  
Non Linear ◽  
Pushover Curve

Abstract: In India multistoried buildings are widely designed with the method suggested by Indian Standard IS1893: Part-1:2016, Criteria for the Earthquake resistance design of the structures: General Provision and Buildings for the calculation of equivalent horizontal load generated during earthquake. Response Spectrum method is widely used for the multistoried buildings with base shear scaled to get the equal value as calculated with the time period obtained by the empirical formula of time period of the buildings. The approach of the dynamic analysis is basically a linear approach. In this scenario we are totally relying on ductility of the structure. The concept for performing the Pushover Analysis is to analyze a structure with non linear approach and to find the behavior of structure beyond its ductile limit. Pushover analysis can help to demonstrate how progressive failure in building really occurs and to identify the mode of final failure of the buildings. Pushover analysis is commonly used to evaluate the seismic capacity of existing structures and appears in several recent guidelines for retrofit seismic design. It can also be useful for performance-based design of new buildings that rely on ductility or redundancies to resist earthquake forces. So basically Pushover analysis is non linear approach to estimate the strength capacity of the structure beyond Limit State. In this analysis we can predicts the weak areas in the building and keeping track of the sequence of damages of each and every member in the building/structure, thus can be performed for existing structure and also for performance base design, similarly for progressive collapse analysis. The approach is easy to understand, when we designed or analyze a moment resisting frame as per IS 1893:2016 by Response Spectrum method with response spectrum method with the response reduction factor 5 i.e. R=5, we are basically designing the structure with 1/5th horizontal load (calculated with the empirical formula given in IS 1893:2016), the rest 4/5th load is basically taken care by the ductile behavior of the building. The ductile detailing suggested by the 13920:2016 will resist the full impact of seismic load without collapse. The distribution and impact of the full horizontal load can be analyzed with the non linear approach, and pushover analysis is one of them. METHODLOGY: A pushover analysis is performed by subjecting a structure to a monotonically increasing pattern of lateral loads, representing the inertial forces which would be experienced by the structure when subjected to ground shaking. Under incrementally increasing loads various structural elements may yield sequentially. Consequently, at each event, the structure experiences a loss in stiffness. Using a pushover analysis, a characteristic non linear force displacement relationship can be determined. Key elements of the pushover analysis 1) Definition of plastic hinges, it includes hinges for uncoupled moment, hinges for uncoupled axial load, hinges for uncoupled shear force, hinges for coupled axial force and hinges for biaxial bending moment. 2) Definition for control node, the node used to monitor the displacement of the structures. Pushover curve is obtained from the displacement verses base shear. 3) Developing the pushover curve which includes the elevation of the forces distribution 4) Estimation of the displacement demand. 5) Evaluation of performance level for the structure

Comparative Evaluation of Mode Combination Methods in Seismic Analysis Using Response Spectrum Method for Tank Structure Using FEA - Seismic FEA

2011 ◽  
Vol 110-116 ◽  
pp. 5240-5248
Author(s):  
Sujay Shelke ◽  
H.V. Vankudre ◽  
Vinay Patil
Keyword(s):  
Seismic Analysis ◽  
Response Spectrum ◽  
Initial Step ◽  
Relative Displacement ◽  
Geometrical Parameters ◽  
Response Spectrum Method ◽  
Spectrum Method ◽  
Combination Methods ◽  
Eigen Values ◽  
Modes Of Vibration

Typical seismic analysis using response spectrum method involves several steps from the initial step of extracting the modes. At the initial stage Eigen values are extracted corresponding to the modes of vibration. These give us Eigen vectors which are a series of relative displacement shapes; however these do not correspond to real displacements or stresses. Participation factors asses these Eigen vectors and grades them according to contribution they will have to the overall solution. Based on the spectral seismic acceleration, participation factor is used to calculate the mode coefficient, which is more of a scaling factor to give physical meaning to the values. Once the modes are extracted, the key issue is of combining these modes to obtain the seismic response. The modes cannot be added algebraically in reality as all the modes do not occur at the same time. Hence we employ methods which can add the modes in a more realistic manner. The objective of this paper is to do a comparative study of various mode combination methods with a focus on tank structures and study the effect of various geometrical parameters on the combination methods

Research on the Seismic Analysis and Optimization of High Flux Reactor Nuclear Power Piping System Based on Multi-Point Response Spectrum Method

2020 ◽  
Author(s):  
Xuan Huang ◽  
Pingchuan Shen ◽  
Shuai Liu ◽  
Jian Liu ◽  
Xiaozhou Jiang ◽  
...  
Keyword(s):  
Seismic Analysis ◽  
Response Spectrum ◽  
High Flux ◽  
Analysis Method ◽  
Response Spectrum Method ◽  
High Flux Reactor ◽  
Reactor Coolant ◽  
Spectrum Method ◽  
Flux Reactor ◽  
Coolant System

Abstract High flux reactor is an important engineering test reactor, which can be used in irradiation research of materials, chemistry, isotopes, medicine and other fields. In the high flux reactor coolant system, there are a large number of nuclear pipes and the layout is complex. The optimization of seismic analysis method for reactor coolant system is an important part in the design process to ensure the nuclear pipes meet the design specifications. The traditional single point response spectrum method needs to envelope the response spectrum of different floors as the analysis input. This method is difficult to give the reasonable seismic load to the numerous nuclear pipes and it will increase the design cost and the difficulty of safety analysis about nuclear pipe. In this paper, an optimized seismic analysis method of reactor coolant system is proposed. By using the multi-point response spectrum method, the optimization of different excitation loading modes for different constrained support points is realized. The analysis results show that the multi-point response spectrum method can solve the problem that different support points are located at different elevation floors in the reactor coolant system, which makes the calculation results more accurate and reasonable. Compared with the traditional method, it can make the design more efficient and practical.

Insights Gleaned From NRC-BNL Benchmark Evaluation of Seismic Analysis Methods for Non-Classically Damped Coupled Systems

2004 ◽  
Vol 126 (1) ◽  
pp. 75-84 ◽  
Author(s):  
J. Xu ◽  
G. DeGrassi ◽  
N. Chokshi
Keyword(s):  
Normal Mode ◽  
Seismic Analysis ◽  
Response Spectrum ◽  
Time History ◽  
Computer Programs ◽  
Coupled Systems ◽  
Response Spectrum Method ◽  
Complex Mode ◽  
Spectrum Method ◽  
Mode Response

Under the auspices of the US Nuclear Regulatory Commission (NRC), Brookhaven National Laboratory (BNL) developed a comprehensive program to evaluate state-of-the-art methods and computer programs for seismic analysis of typical coupled nuclear power plant (NPP) systems with non-classical damping. In this program, four benchmark models of coupled building-piping/equipment systems with different damping characteristics were developed and analyzed by BNL for a suite of earthquakes. The BNL analysis was carried out by the Wilson-θ time domain integration method with the system-damping matrix computed using a synthesis formulation as presented in a companion paper [Xu, J., 2003, Nuclear Eng. Des. These benchmark problems were subsequently distributed to and analyzed by program participants applying their uniquely developed methods and computer programs. This paper presents the insights gleaned from the participants’ analyses, and the comparison of their results to the BNL time history solutions. The participant’s results established using complex modal time history methods showed close agreement with the BNL solutions, while the analyses produced with either complex-mode response spectrum methods or classical normal-mode response spectrum method, in general, produced relatively conservative results, when averaged over a suite of earthquakes. However, when coupling due to damping is significant, complex-mode response spectrum methods performed better than the classical normal-mode response spectrum method. Furthermore, as part of the program objectives, a parametric assessment is performed aiming at evaluating the applicability and sensitivity of various analysis methods to problems with different dynamic characteristics unique to coupled NPP systems. It is believed that the findings and insights learned from this program are useful in developing new acceptance criteria and providing guidance for future regulatory activities involving licensing applications of these alternate methods to coupled systems.

Floor Response Spectrum Method of Multiply Supported Piping System Assisted by Time History Analysis

2020 ◽  
Author(s):  
Yoshihiro Takayama ◽  
Ayaka Yoshida ◽  
Iriki Nobuyoshi ◽  
Eiichi Maeda
Keyword(s):  
Seismic Analysis ◽  
Response Spectrum ◽  
Time History ◽  
Correlation Coefficients ◽  
Time History Analysis ◽  
Piping System ◽  
Response Spectrum Method ◽  
Sum Rule ◽  
Spectrum Method ◽  
History Analysis

Abstract The independent support motion response spectrum method (ISM) is currently used for seismic analysis to calculate the response of multiply supported piping with independent inputs of support excitations. This approach may derive considerable overestimation in the combination of group responses under the absolute sum rule of NUREG-1061 [1]. Then authors have developed an advanced method of the ISM approach named SATH (Spectrum Method Assisted by Time History Analysis). In the SATH method, both of floor response spectra and time histories of floor acceleration are used as independent inputs of support excitations. The group responses are summed with correlation coefficients which are calculated by considering each time history of modal response by independent inputs of support excitations. In this paper, the necessity of taking the effects of correlation coefficients for the group responses into account in the ISM approach is examined. The SATH method has advantage to derive a more realistic sum rule of the group responses and applicability for the actual design.

Sign in / Sign up

Export Citation Format

Share Document