scholarly journals Implementasi Internal Wireless Roaming Menggunakan Mikrotik Wireless Distribution System (WDS) Pada STMIK Lombok

2018 ◽  
Vol 1 (1) ◽  
pp. 38
Author(s):  
Mohammad Taufan Asri Zaen ◽  
Falah Husni
Keyword(s):  
Wireless Network ◽  
Distribution System ◽  
Access Point ◽  
Coverage Area ◽  
Basic Service ◽  
Signal Coverage ◽  
Extended Service

Currently the hotspot network used by students in STMIK Lombok uses Basic Service Set topology (BSS), therefore different Service Set Identifier (SSID) in each Access Point (AP) causes the mobility and reliability of the hotspot network to decrease. To overcome this problem can be applied hotspot system with Extended Service Set topology (ESS) that uses more than one AP and integrate all AP into a single wireless network using Internal Wireless Roaming so that client mobility is not disturbed when moving locations in the campus area without having to reconfigured. The signal coverage test of roaming network that has been done in STMIK Lombok using Wireless Distribution System (WDS) has not reached all campus area but can be overcome by adding AP to increase coverage area. Roaming that runs between APs can work but requires more time in the process of moving.

scholarly journals An Experimental Connectivity Performance of Simple Wireless Mesh Implementation Using Wireless Distribution System (WDS)

2017 ◽  
Vol 1 (02) ◽  
pp. 18-27
Author(s):  
Dicky Muhammad ◽  
Gita Indah Hapsari ◽  
Giva Andriana Mutiara
Keyword(s):  
Wireless Network ◽  
Distribution System ◽  
Wireless Mesh Network ◽  
Computer Network ◽  
Access Point ◽  
Mesh Network ◽  
Wireless Mesh ◽  
Signal Coverage ◽  
Wireless Signal ◽  
Test Result

Today wireless technology grows rapidly, especially in the field of telecommunications and communications. Computer networks now widely utilizes wireless. Wireless Mesh Network is one of the method which is use to communicate computer wirelessly. One important factor in application of wireless network is how to extend wireless signal coverage. Wireless Distribution System is one way to expand the wireless network by mean of wireless interconnection of access point on the network IEEE 8022.11. This study suggests how to build a simple wireless computer network using WDS technology and describes connectivity performance and its signal coverage. The test result of connectivity performance shows that the connectivity between two computers work properly for reliability and multi SSID testing. However, the connectivity was not success in multichannel testing. Furthermore the test result of coverage shows that the range of wireless signal coverage reaches 39 meters with different circumstance room.

scholarly journals Penerapan Wireless Distribution System (WDS) Mesh Untuk Optimasi Coverage Area Wifi Universitas Muhammadiyah Jember

2019 ◽  
Author(s):  
Achmad Riyadus Sholikhin ◽  
Triawan Adi Cahyanto
Keyword(s):  
Distribution System ◽  
Wireless Lan ◽  
Signal Strength ◽  
Access Point ◽  
Signal To Noise ◽  
Coverage Area

Salah satu perubahan yang sangat pesat di dalam jaringan komputer adalah penggunaan wireless LAN (WLAN) untuk mengakses jaringan baik lokal maupun internet. Salah satu cara penambahan Access Point (AP) yang tidak mengubah konfigurasi software yang telah di gunakan yaitu menggunakan jaringan Wireless Distribution System Mesh (WDS). Penggunaan WDS mesh di Universitas Muhammmadiyah Jember memungkinkan konfigurasi wireless yang sedikit berbeda agar dapat mengurangi terputusnya koneksi pada pengguna karena jangkauan area jaringan wireless. Salah satu langkah adalah dengan menggunakan beberapa perangkat Acesss Point menjadi satu kesatuan untuk menangani kasus terputusnya koneksi dengan memanfaatkan service jaringan yaitu WDS Mesh. Wireless Distribution System atau (WDS) Mesh mampu meng- coverage area wifi di Universitas Muhammadiyah Jember dan hasil ujicoba serta analisa device client terhadap AP yang sudah di WDS Mesh dengan parameter Signal Strength, CCQ, Signal to Noise, Throughput adalah Excellent (Bagus)

scholarly journals MANAJEMEN WIRELESS DENGAN MAPPING SSID ACCESS POINT PADA STMIK LOMBOK

2019 ◽  
Vol 2 (2) ◽  
pp. 20
Author(s):  
Ahmad Tantoni ◽  
Mohammad Taufan Asri Zaen
Keyword(s):  
Wireless Network ◽  
Access Point ◽  
Access Points ◽  
Signal Coverage ◽  
Wireless Signal ◽  
Building Area ◽  
Network Mapping ◽  
Spot Signal ◽  
Blank Spot ◽  
Campus Building

The wireless network at STMIK Lombok is connected to the local server network and the internet with the spread of access points in several buildings. In some parts of the building have different strengths and the access point or wireless signal strengths, some have broad and strong signal coverage, but there are also areas that have limited / weak signal coverage, even no wireless or blank-spot signal. This blank spot can be caused by many obstacles, including walls, tiles, trees, and others. Based on observations at STMIK Lombok, wireless signal coverage has not been able to cover the entire campus building area; many are unstable and tend to be weak. Therefore, wireless management research was conducted by mapping the SSID access point which is expected to offer/give a solution so that the wireless signal can cover all STMIK Lombok campus buildings. Wireless management by mapping SSID access points on STMIK Lombok provides a solution for location placement and number of access points to be installed so that the campus area of ​​STMIK Lombok can be covered by wireless networks. Keywords : wireless, wireless network, mapping SSID, access point, MikroTik

scholarly journals Design and Development of Android-Based Indoor Wi-Fi Site Survey Application

2021 ◽  
Vol 9 (3) ◽  
pp. 276
Author(s):  
Ida Bagus Kade Taruna ◽  
I Made Agus Dwi Suarjaya ◽  
I Putu Agus Eka Pratama
Keyword(s):  
Wireless Network ◽  
Dead Reckoning ◽  
Signal Strength ◽  
Access Point ◽  
Receive Signal Strength Indicator ◽  
Living Room ◽  
Application Development ◽  
Design And Development ◽  
Coverage Area ◽  
Indoor Wireless

In the indoor wireless network technology, it is found that there are many disturbances such as interference with LOS (Line of Sight), improper access point position, and low signal strength. To overcome these disturbances, wireless network optimization can be done by conducting a survey or analysis of the coverage area and quality of service. This analysis can be done by using an application, however available applications are mostly desktop applications, which makes surveying the indoor wireless network less efficient. This study discusses the design and development of mobile applications that can be used to analyze Wi-Fi networks in an indoor environment which can provide information about the coverage area of ??a Wi-Fi network. The application development uses the PDR (Pedestrian Dead Reckoning) RSSI (Receive Signal Strength Indicator) classification method. Application testing was carried out using two different scenarios, where in the first scenario the Wi-Fi network source was placed in the living room area, while in the second scenario the Wi-Fi network source was placed in the bedroom area 2. The result of the test carried out is the application can provide information regarding the coverage area of the signal from the two positions of different Wi-Fi network sources in a heatmap format that can be easily understood and can be used to optimize Wi-Fi networks in the future. Keywords : Android Application, Wireless Network, Sensor, Network Survey

scholarly journals Analisis Sinyal Wireless Berdasarkan Jarak Antar Access Point Menggunakan Metode Simulated Annealing Pada SMAN 1 Praya Tengah

2018 ◽  
Vol 1 (1) ◽  
pp. 33
Author(s):  
MUHAMMAD FAUZI ZULKARNAEN ◽  
Moh Husni Taufik ◽  
Maemun Saleh
Keyword(s):  
Wireless Networks ◽  
Simulated Annealing ◽  
Wireless Network ◽  
Access Point ◽  
Coverage Area ◽  
Point Position ◽  
Point Placement

Access point placement on wireless networks is needed to optimize the strength of signal received by receiver from transmitter. The most influential parameter in determining the performance of access point position is signal strenght, because this value will be used to determine the coverage area of a access point. In this research, signal strengths of access point to receiver in the SMAN 1 Praya Tengah have been measured using inSSIDer application and results in the values of RSSI from transmitter to receiver. Data obtained from the filed measurements are used to analyse the influence of access point placement using simulate annealing. The research conducted is expected to generate an appropriate position and analysis for further optimization of access point position on wireless network.

scholarly journals Design and Analysis of Wireless Network with Wireless Distribution System using Multi-Factor Authentication-based User Authentication

2020 ◽  
Vol 2 (1) ◽  
pp. 17-24
Author(s):  
Muchamad Rusdan ◽  
Muhamad Sabar
Keyword(s):  
Wireless Networks ◽  
Wireless Network ◽  
Distribution System ◽  
User Authentication ◽  
High Mobility ◽  
Access Point ◽  
The Internet ◽  
Literature Study ◽  
Analysis And Design ◽  
User Friendly

Wireless networks are one of the best alternatives in building practical and flexible computer networks that have high mobility. Most of them use wireless networks to support existing cable networks, but on wireless networks, they still use cable media as a backbone of the access point, which supports communication users can access the internet and find information. The problem of using cables as backbone media can be a significant challenge in places that are difficult to reach by wires. Wireless networks provide convenience and convenience that is high enough to use. As long as they are in an area that is supported by a wireless network, users can access the internet at any time. To make the wireless network connected to the internet safe and easy to use, we can create a user authentication system based on Multi-Factor Authentication (MFA) that can be used to authenticate and authorize. In general, each user can use existing wireless network services by verifying users based on Wifi Protected Access 2 Pre-Shared Key (WPA2-PSK). The purpose of this research is to develop a wireless network that uses Multi-Factor Authentication (MFA) based user authentication to be able to connect to the wireless network to increase security and provide the use of existing wireless networks. The research method used in this study uses descriptive qualitative research methods, with data collection using literature study and observation techniques. After analysis and design, it can be concluded that user authentication is based on Multi-factor Authentication (MFA) in a safe and user-friendly manner that can determine the users who are allowed and not allowed to use wireless networks.

Wireless Sensor or Access-Point Deployment Using Coverage-Area Maximization over Visibility Graph

2021 ◽  
Author(s):  
Venkata Gadiraju ◽  
Hsiao-Chun Wu ◽  
Costas Busch ◽  
Prasanga Neupane ◽  
Shih Yu Chang
Keyword(s):  
Access Point ◽  
Visibility Graph ◽  
Wireless Sensor ◽  
Coverage Area

scholarly journals Análisis basado en parámetros QoS para el servicio VoIP sobre wireless en un campus universitario [Analysis based on QoS parameters for VoIP service on a wireless network within a university campus]

2014 ◽  
Author(s):  
Alexander Olave ◽  
Luis Felipe Valencia ◽  
Juan Carlos Cuéllar
Keyword(s):  
Quality Of Service ◽  
Wireless Network ◽  
Packet Loss ◽  
Cost Benefit ◽  
Access Point ◽  
University Campus ◽  
Delay Jitter ◽  
Qos Parameters ◽  
La Red

Resumen Voz sobre IP, VoIP, es uno de los servicios con mayor desarrollo bajo plataformas inalámbricas; actualmente se ha iniciado su implementación como alternativa frente a la PSTN (red pública conmutada). El interés por VoIP radica en su relación costo-beneficio, ya que las organizaciones pueden utilizar la misma plataforma de su red de datos para transmitir voz. Por lo anterior, es importante que la organización tenga claro que, para garantizar el buen funcionamiento del servicio de VoIP, es decir para ofrecer QoS, se debe realizar la medición de parámetros que afectan la calidad del servicio como lo son: el retardo, la variación del retardo, el ancho de banda y la pérdida de paquetes. Este artículo analiza y valida los parámetros de QoS necesarios para garantizar el buen funcionamiento del servicio de VoIP sobre la red inalámbrica del campus de la Universidad Icesi. Se realizan pruebas en diferentes escenarios para mostrar que no solo factores como el retardo, y su variación, influyen en la calidad de servicio, sino que también la intensidad de la señal que recibe el cliente desde los puntos de acceso.Palabras Clave: Voz sobre IP, Calidad de servicio, Pérdida de paquetes, Retardo, Variación del Retardo, Intensidad de Señal. Abstract VoIP is one of the services that has been developing over under this type of wireless platforms and today has begun to implement as an alternative to the PSTN (Public Switched Telephone Network). The interest in VoIP is its cost-benefit ratio, and that organizations can use the same platform for their data network to transmit voice. Therefore it is important that the organization is clear that to ensure the smooth operation of the VoIP service, ie provide QoS, you must perform the measurement of parameters that affect the quality of service such as: delay, jitter, bandwidth, packet loss. In this paper we analyze and validate the QoS parameters needed to ensure the smooth operation of VoIP over wireless network on the Icesi University campus. We performed a series of tests in different scenarios to show that not only factors such as delay and jitter influencing the quality of service, but also the client signal strength received from of the AP (Access Point).Keywords: Voice over IP, Quality of service, Packet Loss, Delay, Delay variation, signal intensity.

scholarly journals PERFORMANCE ANALYSIS AND QOS FRAMEWORK OF FLY WİRELESS NETWORK

2019 ◽  
Vol 01 (02) ◽  
pp. 103-115
Author(s):  
Durai Pandian M
Keyword(s):  
Quality Of Service ◽  
Performance Analysis ◽  
Wireless Network ◽  
Wireless Mesh Network ◽  
Environmental Changes ◽  
Mesh Networks ◽  
Access Point ◽  
Mesh Network ◽  
Wireless Mesh

The spread out of wireless mesh network has made possible the extended range of communication network that are impractical due to environmental changes in a wired access point, these wireless mesh network does not require much competence to set it up as it can be set very fast at a cheap rate, and the conveyancing of messages in it happens by selecting the shortest path, these wireless mesh built-in with irrepressible and invulnerable identities come with an endurance to temporary congestion and individual node failure. This results in an architecture providing a better coverage, flaw indulgent with higher bandwidth compared to other wireless distributed systems. But faces the limitation on power conservation. The battery activated mesh nodes loses their resources on perception, processing and transmission of the data’s, though these batteries or accumulators comes with energy regaining capability still draw backs show up as their nature of energy regaining are unexposed. So the performance analysis of fly wireless network which proposes a uninterrupted wireless mesh networks aims at providing a best measure of performance that is the best quality of service on the meshwork by providing an improved energy gleaning using potency segregation (IGPS) which empowers each node to have self- contained accumulation of energy achieving heightened adaption with energy consumption kept at a minimum. The gross functioning of the proposed is examined on the bases of delay and packet loss to prove the quality of service acquired.

Sign in / Sign up

Export Citation Format

Share Document