Digital twin of the chip formation process

2020 ◽  
pp. 81-86
Author(s):  
Yu.G. Kabaldin ◽  
D.A. Shatagin ◽  
M.S. Anosov ◽  
A.M. Kuz'mishina

The formation of chips during the processing of various materials was studied. The relationship between the type of chips, the type of crystal lattice of the material and the number of sliding systems is shown. A neural network model of chip formation is developed, which allows predicting the type of chips. An intelligent control system for the process of chip formation during cutting is proposed. Keywords: chip formation, crystal lattice, neural network model, type of chips. [email protected]

BioResources ◽  
2021 ◽  
Vol 16 (3) ◽  
pp. 4947-4962
Author(s):  
Jin Yan ◽  
Jianan Liu ◽  
Liqiang Zhang ◽  
Zhili Tan ◽  
Haoran Zhang ◽  
...  

The influence of the process parameters on the mechanical properties of compact wood powder generated via hot-pressing was analyzed through a single-factor experiment. The mechanical properties exhibited a nonlinear trend relative to the process conditions of hot-pressed compact wood powder. The relationship models between the process parameters and the mechanical properties for the compact wood powder were established by applying a multiple regression analysis and neural network methods combined with data from an orthogonal array design. A comparison between experimental and predicted results was made to investigate the accuracy of the established models by applying several data groups among the single-factor experiments. The results showed that the accuracy of the neural network model in terms of predicting the mechanical properties was greater compared with the multiple regression model. This demonstrates that the established neural network model had a better prediction performance, and it can accurately map the relationship between the process conditions and the mechanical properties of the compact wood powder.


2014 ◽  
Vol 19 (3) ◽  
pp. 575-584 ◽  
Author(s):  
P. Gierlak ◽  
M. Muszyńska ◽  
W. Żylski

Abstract In this paper, to solve the problem of control of a robotic manipulator’s movement with holonomical constraints, an intelligent control system was used. This system is understood as a hybrid controller, being a combination of fuzzy logic and an artificial neural network. The purpose of the neuro-fuzzy system is the approximation of the nonlinearity of the robotic manipulator’s dynamic to generate a compensatory control. The control system is designed in such a way as to permit modification of its properties under different operating conditions of the two-link manipulator


Sensors ◽  
2020 ◽  
Vol 20 (11) ◽  
pp. 3213 ◽  
Author(s):  
Amr Hassan ◽  
Abdel-Rahman Akl ◽  
Ibrahim Hassan ◽  
Caroline Sunderland

Predicting the results of soccer competitions and the contributions of match attributes, in particular, has gained popularity in recent years. Big data processing obtained from different sensors, cameras and analysis systems needs modern tools that can provide a deep understanding of the relationship between this huge amount of data produced by sensors and cameras, both linear and non-linear data. Using data mining tools does not appear sufficient to provide a deep understanding of the relationship between the match attributes and results and how to predict or optimize the results based upon performance variables. This study aimed to suggest a different approach to predict wins, losses and attributes’ sensitivities which enables the prediction of match results based on the most sensitive attributes that affect it as a second step. A radial basis function neural network model has successfully weighted the effectiveness of all match attributes and classified the team results into the target groups as a win or loss. The neural network model’s output demonstrated a correct percentage of win and loss of 83.3% and 72.7% respectively, with a low Root Mean Square training error of 2.9% and testing error of 0.37%. Out of 75 match attributes, 19 were identified as powerful predictors of success. The most powerful respectively were: the Total Team Medium Pass Attempted (MBA) 100%; the Distance Covered Team Average in zone 3 (15–20 km/h; Zone3_TA) 99%; the Team Average ball delivery into the attacking third of the field (TA_DAT) 80.9%; the Total Team Covered Distance without Ball Possession (Not in_Poss_TT) 76.8%; and the Average Distance Covered by Team (Game TA) 75.1%. Therefore, the novel radial based function neural network model can be employed by sports scientists to adapt training, tactics and opposition analysis to improve performance.


2020 ◽  
Vol 2020 ◽  
pp. 1-8
Author(s):  
Bo Liu ◽  
Qilin Wu ◽  
Yiwen Zhang ◽  
Qian Cao

Pruning is a method of compressing the size of a neural network model, which affects the accuracy and computing time when the model makes a prediction. In this paper, the hypothesis that the pruning proportion is positively correlated with the compression scale of the model but not with the prediction accuracy and calculation time is put forward. For testing the hypothesis, a group of experiments are designed, and MNIST is used as the data set to train a neural network model based on TensorFlow. Based on this model, pruning experiments are carried out to investigate the relationship between pruning proportion and compression effect. For comparison, six different pruning proportions are set, and the experimental results confirm the above hypothesis.


2020 ◽  
Vol 12 (7) ◽  
pp. 1096
Author(s):  
Zeqiang Chen ◽  
Xin Lin ◽  
Chang Xiong ◽  
Nengcheng Chen

Modeling the relationship between precipitation and water level is of great significance in the prevention of flood disaster. In recent years, the use of machine learning algorithms for precipitation–water level prediction has attracted wide attention in flood forecasting and other fields; however, a clear method to model the relationship of precipitation and water level using grid precipitation products with a neural network model is lacking. The issues of the method include how to select a neural network model, as well as how to influence the modeling results with different types and resolutions of remote sensing data. The purpose of this paper is to provide some findings for the issues. We used the back-propagation (BP) neural network and a nonlinear autoregressive exogenous model (NARX) time series network to model the relationship between precipitation and water level, respectively. The water level of Pingshan hydrographic station at a catchment area in the Jinsha River Basin was simulated by the two network models using three different grid precipitation products. The results showed that when the ground station data are missing, the grid precipitation product is a good alternative to construct the precipitation–water level relationship. In addition, using the NARX network as a model fitting network using extra inputs was better than using the BP neural network; the Nash efficiency coefficients of the former were all higher than 97%, while the latter were all lower than 94%. Furthermore, the input of grid products with different spatial resolutions has little significant effect on the modeling results of the model.


2011 ◽  
Vol 239-242 ◽  
pp. 2867-2872
Author(s):  
Hong Lei Sun ◽  
Chun Jian Su ◽  
Rui Xue Zhai

The blueprint for an intelligent control system of cap-shape bending has been advanced in this paper using neural network technology, aiming at an accurate control of bending springback, the prominent problem during the forming process for the cap-shape bending of sheet metal. The feed-forward neural network of real-time identification for material performance parameters and the friction coefficient have been established. The neural network identifies the parameters for real-time needed material performance, which utilizes the measurability of the physical quantities, and predicts the parameters for optimum technology, so a satisfied accuracy of convergence has been achieved. The intelligent control experimentation system of cap-shape bending has been established, the validity of which has been tested for four kinds of materials. The result of the tests proves the feasibility of the blueprint of the intelligent control system.


Sign in / Sign up

Export Citation Format

Share Document