scholarly journals EFFECT OF MAGNETIZATION OF BIODIESEL ON ITS CHEMICAL PROPERTIES AND PERFORMANCE AND EMISSION PARAMETERS OF DIESEL ENGINE

2021 ◽  
Author(s):  
Ajay Chandravanshi ◽  
◽  
Shrikant Pandey ◽  
Rakesh Kumar Malviya ◽  
◽  
...  
Keyword(s):  
Magnetic Field ◽  
Diesel Engine ◽  
Chemical Properties ◽  
Oxides Of Nitrogen ◽  
Performance Parameters ◽  
Brake Thermal Efficiency ◽  
Performance And Emission ◽  
Regular Increase ◽  
And Performance ◽  
The Magnetic Field

Utilization of biodiesel results in lower emissions of hydrocarbons, carbon mono oxide, and smoke. But with the use of biodiesel as fuel emission of Oxides of nitrogen increases along with this some performance parameters also deteriorated. In the present investigation, the fact has been used that, the magnetization of fuels containing hydrocarbon changes the chemical properties as well as orientation and arrangement of molecules of fuel. In this experimental investigation density and calorific values of biodiesel have been determined. In another setup of experimentation on a single-cylinder four-stroke diesel engine, observations are taken with diesel, biodiesel blend containing 20% biodiesel (BD20), and magnetized biodiesel (BD20+MF) as fuel. Results of this investigation show that, the magnetization of biodiesel is not only helpful in increasing performance parameters like brake specific fuel consumption and brake thermal efficiency but also it helps to control the emissions of carbon mono oxide, oxides of nitrogen, hydrocarbons, and smoke. Maintaining the magnetic field just before the entry of the combustion chamber on the fuel line is a little hard, due to the regular increase in temperature of the spot where magnets are kept. It is possible that, if the strength of the magnetic field is increased then, there may be further improvement in performance and engine parameters, as in this investigation only 4000 Gauss Magnetic field has been used.

scholarly journals Combined effect of ‘biodiesel, ethanol, exhaust gas recirculation and magnetization of fuel’ on the performance and emission parameters of diesel engine.

2021 ◽  
Author(s):  
Ajay Chandravanshi ◽  
◽  
Shrikant Pandey ◽  
Rakesh K. Malviya ◽  
◽  
...  
Keyword(s):  
Diesel Engine ◽  
Exhaust Gas Recirculation ◽  
Exhaust Gas ◽  
Oxides Of Nitrogen ◽  
Performance Parameters ◽  
Brake Thermal Efficiency ◽  
Performance And Emission ◽  
Hydro Carbon ◽  
Gas Recirculation ◽  
Direct Ignition

Utilization of biodiesel as alternative fuel results in higher emission of oxides of nitrogen (NOx) and reduced performance parameters. Exhaust gas recirculation (EGR) is a great technology to control the emission of NOx, but use of EGR reduces the performance parameters of diesel engines. Oxidative addition and magnetization of fuel help to make the combustion complete. In the present investigation, Jatropha biodiesel has been used with diesel in the form of a blend having 20% biodiesel (BD20) as fuel in 4-stroke, direct ignition, diesel engine. 5% Ethanol (E5) has been used as additive along with biodiesel blends and 10% EGR. The magnetization of fuel (MF) has been done with the help of a permanent magnet having strength of 3000 gauss. The results of this investigation show that BD20 is beneficial as fuel for reducing emissions like Carbon Mono-oxide, Hydro-Carbon, and smoke but it reduces Brake Power and Brake Thermal Efficiency. BD20E5 gives better performance parameters than the BD20, but the emission of HC increases slightly. 10% EGR reduces NOx emission with a small cost of performance parameters but with MF performance and emission parameters were improved.

Effect of Combustion Chamber Geometry on Performance and Emission Characteristics of a Diesel Engine Fueled with Mahua Biodiesel Blends

2014 ◽  
Vol 984-985 ◽  
pp. 900-906
Author(s):  
L. Saravanakumar ◽  
B.R. Ramesh Bapu ◽  
B. Durga Prasad
Keyword(s):  
Diesel Engine ◽  
Combustion Chamber ◽  
Emission Characteristics ◽  
Oxides Of Nitrogen ◽  
Plant Oil ◽  
Brake Thermal Efficiency ◽  
Performance And Emission ◽  
Standard Configuration ◽  
Mahua Biodiesel ◽  
High Fatty Acids

The present work investigates the effect of change in combustion chamber geometry on performance and emission characteristics of single cylinder diesel engine fuelled with mahua biodiesel. Since plant oil derived from the mahua tree has high fatty acids, it undergoes esterification followed by transesterification process to reduce its viscosity. Experiments were conducted using a blend of 20% biodiesel (B20) 40% biodiesel (B40) with diesel and compared with diesel by using two types of combustion chamber geometry, explicitly hemispherical and modified hemispherical combustion chamber. Performance parameters such as Brake Thermal Efficiency (BTE), Brake Specific Fuel Consumption (BSFC) and emission parameters like Unburned Hydro Carbon (UBHC), Oxides of Nitrogen (NOx) were studied from the diesel engine with above mentioned configurations. It is obvious that there is considerable improvement in the performance parameter viz, BTE, BSFC and reduction in UBHC emissions by using the modified geometry piston. However, the NOx emission was found to be higher than that of standard configuration. The results obtained from the blend B20 at modified combustion chamber geometry are on par with diesel and hence mahua biodiesel can be suggested as an alternative fuel for Compression Ignition (C.I) engine with modified combustion chamber geometry.

Performance and Emission Characteristics of Diesel Engine Using Alumina Nanoparticle Blended Biodiesel Emulsion Fuel

2015 ◽  
Vol 138 (2) ◽  
Author(s):  
A. Anbarasu ◽  
A. Karthikeyan ◽  
M. Balaji
Keyword(s):  
Diesel Engine ◽  
Alumina Nanoparticles ◽  
Emission Characteristics ◽  
Oxides Of Nitrogen ◽  
Smoke Emission ◽  
Entire Study ◽  
Brake Thermal Efficiency ◽  
Alumina Nanoparticle ◽  
Performance And Emission ◽  
Blended Fuel

Diesel engines are widely used for their low fuel consumption and better efficiency. An investigation was carried out with a single cylinder diesel engine to establish the effects of alumina nanoparticle incorporation into the Canola biodiesel (BD) emulsion fuel. The Canola BD was formed from the Canola oil by transesterification process, and later the Canola BD emulsion fuel was prepared in the fraction of 83% of Canola BD, 15% of water, and 2% of surfactants (by volume). The alumina nanoparticles were blended with the Canola BD emulsion fuel at different ratios systematically. The entire study was conducted in the diesel engine using the three fuels, namely, neat BD, Canola BD emulsion fuel, and alumina nanoparticle blended Canola emulsion fuels consecutively. The experimental results revealed a considerable improvement in the brake thermal efficiency (BTE) for the alumina blended Canola emulsion fuels compared with that of neat Canola BD and Canola BD emulsion fuel. At the full load, the BTE observed for the Canola BD fuel was 30.7%, whereas it was 27.81% and 31.6% for the Canola BD emulsion fuel and alumina nanoparticle blended emulsion fuel, respectively. The use of a nanoparticle blended BD fuel reduced the hydrocarbon (HC) and carbon monoxide (CO) emissions but increased oxides of nitrogen (NOx) emissions due to the increased oxygen content in the BD fuel but it was reduced in nanoparticle blended fuel. The smoke emission was reduced by 50% with the use of the nanoparticle blended emulsion fuel.

scholarly journals Performance and emissions of si engine with octane boosters

2018 ◽  
Vol 249 ◽  
pp. 03008
Author(s):  
Sai Vijay Venkatesh ◽  
R Udayakumar
Keyword(s):  
Carbon Dioxide ◽  
Carbon Monoxide ◽  
Emission Characteristics ◽  
Oxides Of Nitrogen ◽  
Performance Parameters ◽  
Si Engine ◽  
Brake Thermal Efficiency ◽  
Performance And Emission ◽  
Brake Power ◽  
Performance And Emissions

In today’s world we see that the demand for gasoline and cars keep increasing and one problem which is significantly seen is that we either opt for a fuel which provides higher performance or for a fuel which provides lesser emissions. In this study we aim to provide higher performance and lower emissions by combining two chemicals or octane boosters, namely ethanol and toluene with gasoline and find out its performance and emission characteristics when compared with traditional gasoline and ethanol-gasoline blend. In this study we have made four blends which are PP, E10, E10T5 and E20T5 which are tested against two performance parameters which are Specific Fuel Consumption, Brake Thermal Efficiency with respect to brake power and emissions parameter which are Carbon Dioxide, Carbon Monoxide, Oxides of Nitrogen and Hydrocarbon with respect to brake power as well. In each of these performance and emissions parameters, the blends are compared and we find that E20T5 has the highest performance and E10T5 has the lowest emission.

An Investigation on the Performance of a Diesel Engine Using Rubber Seed Oil–Diesel Blends

2014 ◽  
Vol 71 (1) ◽  
Author(s):  
P. Shanmughasundaram ◽  
T. I. Manosh ◽  
R. Sivaprakasam
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Seed Oil ◽  
Direct Injection ◽  
Mechanical Efficiency ◽  
Performance Parameters ◽  
Rubber Seed Oil ◽  
Brake Thermal Efficiency ◽  
Performance And Emission ◽  
Biodiesel Blend

In this study, the performance and emission characteristics were analyzed by using rubber biodiesel in a single cylinder direct injection diesel engine. The experiments were conducted using different combination of fuels such as 20%, 50% of biodiesel blends by volume (B20 and B50) with pure diesel fuel, pure biodiesel (B100) and pure diesel fuel (B0). The performance parameters were obtained for different load conditions from No load to Full load at rated rpm. Results indicated that the higher brake thermal efficiency, Mechanical efficiency, reduced specific fuel consumption obtained for biodiesel blend of B20, compared to other blends and diesel fuel.

Performance and emission study of sesbania aculeate biodiesel in a VCR diesel engine

2020 ◽  
Vol 14 (4) ◽  
pp. 7551-7568
Author(s):  
Dandu Mallesham ◽  
J. Krishnaraj ◽  
CH. Ravikiran
Keyword(s):  
Diesel Engine ◽  
Energy Demand ◽  
Fossil Fuels ◽  
Peak Load ◽  
Alternative Fuel ◽  
Brake Thermal Efficiency ◽  
Performance And Emission ◽  
Emission Study ◽  
And Performance ◽  
Emission And Performance

The increasing energy demand and pollution due to fossil fuels influence the necessity of finding a appropriate alternative fuel for a cleaner environment and to sustain the usage of diesel engines in the automobile sector. This research focuses on such exploration of new alternative fuel (biodiesel) and to study its effect on emission and the performance parameters at a 1500 rpm constant speed on a 4-stroke, single-cylinder, variable compression ratio (VCR) diesel engine. The biodiesel from the sesbania aculeate seed oil is produced through the transesterification process.  The blends of sesbania aculeate oil methyl ester (SAOME) with diesel mixture SAOME10, SAOME20, SAOME30, and SAOME40 are used as fuels at various engine loads (20% to 100%) and different compression ratios (CR) (16.5, 17.5 and 18.5). The emission and performance indicators of the proposed biodiesel are analyzed and an evaluation is made with diesel. The experimental outcomes demonstrate that for SAOME20, brake specific fuel consumption (BSFC) and brake thermal efficiency (BTE) are respectively 12.3% lesser and 8.21% higher than diesel under peak load at CR 18.5. Also the experimental investigation confirms a significant emission decrease in NOX, HC, and CO when there is an increase in CR and load.

Reduction of Nitrous Oxide in Diesel Engine using Metal Salt Macro-Emulsion

2017 ◽  
Vol 32 (3-4) ◽  
pp. 69
Author(s):  
S. Sendilvelan ◽  
K. Bhaskar
Keyword(s):  
Diesel Engine ◽  
Metal Salt ◽  
Hydrocarbon Emissions ◽  
Oxides Of Nitrogen ◽  
Brake Thermal Efficiency ◽  
Performance And Emission ◽  
Advantages And Disadvantages ◽  
Metal Salt Solution ◽  
Notable Increase ◽  
Span 80

In this paper four new emulsions were prepared by mixing 0.5% tween 85 and 0.5% span 80 with diesel fuel using 10% aqueous metal salt solution with concentration of 0.4 mol/dm<sup>3</sup>. The performance and emission tests were carried out by using these fuels in single cylinder water cooled diesel engine. The results were compared with that of diesel and comparison graphs were plotted to analyze the advantages and disadvantages of using the new emulsions over diesel. This report analyze on the effect of new emulsion fuels combustion on brake thermal efficiency, brake specific fuel consumption, oxides of nitrogen and hydrocarbon emissions. The emulsions used for analysis achieved reasonable reductions in the NOx emission from diesel engines without requiring any retrofitting of the engines and also there was no notable increase in emission of other pollutants.

scholarly journals Influence of Compression Ratio on the Performance and Emission Characteristics of Annona Methyl Ester Operated DI Diesel Engine

2014 ◽  
Vol 6 ◽  
pp. 832470 ◽  
Author(s):  
Senthil Ramalingam ◽  
Paramasivam Chinnaia ◽  
Silambarasan Rajendran
Keyword(s):  
Diesel Engine ◽  
Methyl Ester ◽  
Compression Ratio ◽  
Diesel Fuel ◽  
Emission Characteristics ◽  
Performance Parameters ◽  
Brake Thermal Efficiency ◽  
Performance And Emission ◽  
Di Diesel Engine ◽  
Blended Fuel

This study aims to find the optimum performance and emission characteristics of single cylinder variable compression ratio (VCR) engine with different blends of Annona methyl ester (AME) as fuel. The performance parameters such as specific fuel consumption (SFC), brake thermal efficiency (BTE), and emission levels of HC, CO, Smoke, and NO x were compared with the diesel fuel. It is found that, at compression ratio of 17: 1 for A20 blended fuel (20% AME + 80% Diesel) shows better performance and lower emission level which is very close to neat diesel fuel. The engine was operated with different values of compression ratio (15, 16, and 17) to find out best possible combination for operating engine with blends of AME. It is also found that the increase of compression ratio increases the BTE and reduces SFC and has lower emission without any engine in design modifications.

scholarly journals Experimental investigations on diesel engine using alumina nanoparticle fuel additive

2021 ◽  
Vol 13 (2) ◽  
pp. 168781402098840
Author(s):  
Mohammed S Gad ◽  
Sayed M Abdel Razek ◽  
PV Manu ◽  
Simon Jayaraj
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Alumina Nanoparticles ◽  
Experimental Investigations ◽  
Fuel Additive ◽  
Alumina Nanoparticle ◽  
Fuel Injectors ◽  
Performance And Emission ◽  
And Performance ◽  
The Impact

Experimental work was done to examine the impact of diesel fuel with alumina nanoparticles on combustion characteristics, emissions and performance of diesel engine. Alumina nanoparticles were mixed with crude diesel in various weight fractions of 20, 30, and 40 mg/L. The engine tests showed that nano alumina addition of 40 ppm to pure diesel led to thermal efficiency enhancement up to 5.5% related to the pure diesel fuel. The average specific fuel consumption decrease about neat diesel fuel was found to be 3.5%, 4.5%, and 5.5% at dosing levels of 20, 30, and 40 ppm, respectively at full load. Emissions of smoke, HC, CO, and NOX were found to get diminished by about 17%, 25%, 30%, and 33%, respectively with 40 ppm nano-additive about diesel operation. The smaller size of nanoparticles produce fuel stability enhancement and prevents the fuel atomization problems and the clogging in fuel injectors. The increase of alumina nanoparticle percentage in diesel fuel produced the increases in cylinder pressure, cylinder temperature, heat release rate but the decreases in ignition delay and combustion duration were shown. The concentration of 40 ppm alumina nanoparticle is recommended for achieving the optimum improvements in the engine’s combustion, performance and emission characteristics.

scholarly journals An investigation of effect of biodiesel and aviation fuel jeta-1 mixtures performance and emissions on diesel engine

2014 ◽  
Vol 18 (1) ◽  
pp. 239-247 ◽  
Author(s):  
Hasan Yamik
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Chemical Properties ◽  
Engine Performance ◽  
Combustion Efficiency ◽  
Aviation Fuel ◽  
Aviation Industry ◽  
Performance And Emission ◽  
Performance And Emissions ◽  
Biodiesel Fuels

Biodiesel is an alternative fuel for diesel engines which doesn?t contain pollutants and sulfur; on the contrary it contains oxygen. In addition, both physical and chemical properties of sunflower oil methyl ester (SME) are identical to diesel fuel. Conversely, diesel and biodiesel fuels are widely used with some additives to reduce viscosity, increase the amount of cetane, and improve combustion efficiency. This study uses diesel fuel, SME and its mixture with aviation fuel JetA-1 which are widely used in the aviation industry. . Fuel mixtures were used in 1-cylinder, 4-stroke diesel engine under full load and variable engine speeds. In this experiment, engine performance and emission level are investigated. As a conclusion, as the JetA-1 ratio increases in the mixture, lower nitrogen oxide (NOx) emission is measured. Also, specific fuel consumption is lowered.

Sign in / Sign up

Export Citation Format

Share Document