scholarly journals A novel initiative on vertical-axis underwater turbine suitable for low underwater current velocities

2019 ◽  
Vol 36 (3) ◽  
pp. 43-51
Author(s):  
Jasper Ahamefula Agbakwuru ◽  
Umar Ukkasha Ibrahim
Keyword(s):  
Vertical Axis ◽  
Sub Saharan Africa ◽  
Low Flow ◽  
Power Coefficient ◽  
Water Current ◽  
Sea State ◽  
Surface Contact Area ◽  
Computational Fluid Dynamics Cfd ◽  
Sub Saharan ◽  
Current Record

The present paper discusses efforts made to reinvent the use of the vertical-axis turbine for use in locations of low underwater current velocities. The present work targets the low flow current of the sub-Saharan ocean system, which has an underwater current record of around 0.3 m/s and a sea state that is mild, benign and with little or no local storms. The present initiative is achieved through a combination of ducting techniques to increase velocity of flow, and the utilisation of a large surface contact area exposed to flowing water per unit of time. Torque estimations are made using three methods: first principle, SolidWorks computational fluid dynamics (CFD) software and physical measurement. The lowest power coefficient for the tested model is computed from SolidWorks CFD software as 0.70. Existing state-of-the-art underwater current power technologies are reviewed and the present initiative described. A future for ocean water current technology in sub-Saharan Africa is also proposed.

CFD Investigation of the Multiple Rotors Darrieus Type Turbine Performance

2019 ◽  
Author(s):  
Omar Sherif Mohamed ◽  
Ahmed Ibrahim ◽  
Ahmed M. R. El Baz
Keyword(s):  
Urban Areas ◽  
Low Cost ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Cfd Simulations ◽  
Close Proximity ◽  
Horizontal Axis Wind Turbines ◽  
Computational Fluid Dynamics Cfd ◽  
Overall Performance

Abstract The last few years have witnessed researches concerned by vertical axis wind turbine (VAWT) performance considering its advantages compared to the horizontal axis wind turbines, as it can be operated in urban areas without producing noise, ease of maintenance and simple construction, in addition to its low cost. More interest is growing in developing efficient clusters of VAWT in order to increase power generation at specific sites by using multiple turbines. In the present work, the performance of various configurations of Darrieus type VAWT clusters is examined using computational fluid dynamics (CFD) simulations. The objective of this work is to increase the overall power coefficient of the turbines cluster compared to single rotor performance. This objective shall be achieved by examining mutual interactions between rotors arranged in close proximity and examining the effect of oblique angle between rotors on overall performance of the cluster of rotors. The performance is assessed by observing the overall power coefficient of the cluster. Also, the velocity wake of the simulated three rotors turbine cases was analyzed and compared to the that of the single rotor.

scholarly journals Preliminary Performance Tests and Simulation of a V-Shape Roof Guide Vane Mounted on an Eco-Roof System

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2846 ◽  
Author(s):  
Xiaohang Wang ◽  
Wentong Chong ◽  
Kokhoe Wong ◽  
Liphuat Saw ◽  
Sinchew Poh ◽  
...  
Keyword(s):  
Power Generation ◽  
Guide Vane ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Roof System ◽  
Low Wind Speed ◽  
Computational Fluid Dynamics Cfd ◽  
Power Generation System ◽  
Low Efficiency

The technical and economic features of a patented V-shape roof guide vane (VRGV) with a solar and wind power generation system mounted on an eco-roof system are presented in this paper. Moreover, this innovative VRGV was investigated on for the purpose of improving the performance of a vertical axis wind turbine (VAWT), which was installed on an eco-roof system to solve the low-efficiency power generation problem of the wind turbines under the condition of a low wind speed. This paper proposes a preliminary study for the performance of the VAWT with the VRGV on a building. This research used a mock-up building with a double slope roof, where a five straight-bladed VAWT was mounted and tested under two conditions, with and without the VRGV. From the comparative experiments, the self-starting performance and rotational speed of the VAWT mounted above a double slope roof with the VRGV have been significantly improved compared to the VAWT without the VRGV. Further, the power coefficient (Cp) of the VAWT can be augmented to about 71.2% increment due to the VRGV design. In addition, numerical simulations by computational fluid dynamics (CFD) were proposed to verify the augmented effect of the Cp of the VAWT under the influence of the VRGV in the experiment. Besides, economic estimation of the VRGV was conducted.

scholarly journals Integrated Surrogate Optimization of a Vertical Axis Wind Turbine

Energies ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 233
Author(s):  
Marco A. Moreno-Armendáriz ◽  
Eddy Ibarra-Ontiveros ◽  
Hiram Calvo ◽  
Carlos A. Duchanoy
Keyword(s):  
Computational Model ◽  
Wind Turbine ◽  
Vertical Axis ◽  
Search Space ◽  
Machine Learning Algorithms ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Surrogate Optimization ◽  
Computational Fluid Dynamics Cfd ◽  
Factorial Design Of Experiments

In this work, a 3D computational model based on computational fluid dynamics (CFD) is built to simulate the aerodynamic behavior of a Savonius-type vertical axis wind turbine with a semi-elliptical profile. This computational model is used to evaluate the performance of the wind turbine in terms of its power coefficient (Cp). Subsequently, a full factorial design of experiments (DOE) is defined to obtain a representative sample of the search space on the geometry of the wind turbine. A dataset is built on the performance of each geometry proposed in the DOE. This process is carried out in an automated way through a scheme of integrated computational platforms. Later, a surrogate model of the wind turbine is fitted to estimate its performance using machine learning algorithms. Finally, a process of optimization of the geometry of the wind turbine is carried out employing metaheuristic optimization algorithms to maximize its Cp; the final optimized designs are evaluated using the computational model for validating their performance.

scholarly journals Application of Simultaneous Symmetric and Cambered Airfoils in Novel Vertical Axis Wind Turbines

2021 ◽  
Vol 11 (17) ◽  
pp. 8011
Author(s):  
Sajad Maleki Dastjerdi ◽  
Kobra Gharali ◽  
Armughan Al-Haq ◽  
Jatin Nathwani
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Dynamic Stall ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbines ◽  
Good Potential ◽  
Computational Fluid Dynamics Cfd ◽  
Naca0018 Airfoil

Two novel four-blade H-darrieus vertical axis wind turbines (VAWTs) have been proposed for enhancing self-start capability and power production. The two different airfoil types for the turbines are assessed: a cambered S815 airfoil and a symmetric NACA0018 airfoil. For the first novel wind turbine configuration, the Non-Similar Airfoils 1 (NSA-1), two NACA0018 airfoils, and two S815 airfoils are opposite to each other. For the second novel configuration (NSA-2), each of the S815 airfoils is opposite to one NACA0018 airfoil. Using computational fluid dynamics (CFD) simulations, static and dynamic conditions are evaluated to establish self-starting ability and the power coefficient, respectively. Dynamic stall investigation of each blade of the turbines shows that NACA0018 under dynamic stall impacts the turbine’s performance and the onset of dynamic stall decreases the power coefficient of the turbine significantly. The results show that NSA-2 followed by NSA-1 has good potential to improve the self-starting ability (13.3%) compared to the turbine with symmetric airfoils called HT-NACA0018. In terms of self-starting ability, NSA-2 not only can perform in about 66.67% of 360° similar to the wind turbine with non-symmetric airfoils (named HT-S815) but the power coefficient of NSA-2 at the design tip speed ratio of 2.5 is also 4.5 times more than the power coefficient of HT-S815; the power coefficient difference between HT-NACA0018 and HT-S815 (=0.231) is decreased significantly when HT-S815 is replaced by NSA-2 (=0.076). These novel wind turbines are also simple.

RTS,S/AS01, a vaccine targeting pre-erythrocytic stages of Plasmodium falciparum

2017 ◽  
Vol 1 (6) ◽  
pp. 533-537
Author(s):  
Lorenz von Seidlein ◽  
Borimas Hanboonkunupakarn ◽  
Podjanee Jittmala ◽  
Sasithon Pukrittayakamee
Keyword(s):  
Protective Efficacy ◽  
Age Groups ◽  
Sub Saharan Africa ◽  
Phase Iii ◽  
European Medicines Agency ◽  
Older Children ◽  
Pivotal Phase ◽  
Malaria Epidemiology ◽  
Maximum Benefit ◽  
Sub Saharan

RTS,S/AS01 is the most advanced vaccine to prevent malaria. It is safe and moderately effective. A large pivotal phase III trial in over 15 000 young children in sub-Saharan Africa completed in 2014 showed that the vaccine could protect around one-third of children (aged 5–17 months) and one-fourth of infants (aged 6–12 weeks) from uncomplicated falciparum malaria. The European Medicines Agency approved licensing and programmatic roll-out of the RTSS vaccine in malaria endemic countries in sub-Saharan Africa. WHO is planning further studies in a large Malaria Vaccine Implementation Programme, in more than 400 000 young African children. With the changing malaria epidemiology in Africa resulting in older children at risk, alternative modes of employment are under evaluation, for example the use of RTS,S/AS01 in older children as part of seasonal malaria prophylaxis. Another strategy is combining mass drug administrations with mass vaccine campaigns for all age groups in regional malaria elimination campaigns. A phase II trial is ongoing to evaluate the safety and immunogenicity of the RTSS in combination with antimalarial drugs in Thailand. Such novel approaches aim to extract the maximum benefit from the well-documented, short-lasting protective efficacy of RTS,S/AS01.

Mortality and Society in Sub-Saharan Africa

1993 ◽  
Vol 47 (3) ◽  
pp. 555-556
Author(s):  
Lado Ruzicka
Keyword(s):  
Sub Saharan Africa ◽  
Sub Saharan

Sub-Saharan Africa

1987 ◽  
Vol 87 (1) ◽  
pp. 118-142
Keyword(s):  
Sub Saharan Africa ◽  
Sub Saharan

Adolescent Suicidality as Seen in Rural Northeastern Uganda

Crisis ◽  
2011 ◽  
Vol 32 (1) ◽  
pp. 43-51 ◽  
Author(s):  
Eugene Kinyanda ◽  
Ruth Kizza ◽  
Jonathan Levin ◽  
Sheila Ndyanabangi ◽  
Catherine Abbo
Keyword(s):  
Low Socioeconomic Status ◽  
Sub Saharan Africa ◽  
Psychosocial Risk ◽  
Psychiatric Nurses ◽  
Health Concern ◽  
Cross Sectional ◽  
Childhood Experiences ◽  
Low Socioeconomic ◽  
Dsm Iv ◽  
Sub Saharan

Background: Suicidal behavior in adolescence is a public health concern and has serious consequences for adolescents and their families. There is, however, a paucity of data on this subject from sub-Saharan Africa, hence the need for this study. Aims: A cross-sectional multistage survey to investigate adolescent suicidality among other things was undertaken in rural northeastern Uganda. Methods: A structured protocol administered by trained psychiatric nurses collected information on sociodemographics, mental disorders (DSM-IV criteria), and psychological and psychosocial risk factors for children aged 3–19 years (N = 1492). For the purposes of this paper, an analysis of a subsample of adolescents (aged 10–19 years; n = 897) was undertaken. Results: Lifetime suicidality in this study was 6.1% (95% CI, 4.6%–7.9%). Conclusions: Factors significantly associated with suicidality included mental disorder, the ecological factor district of residence, factors suggestive of low socioeconomic status, and disadvantaged childhood experiences.

Sign in / Sign up

Export Citation Format

Share Document