scholarly journals HPLC-UV Determination of Dextromethorphan in Syrup Method validation

2019 ◽  
Vol 70 (2) ◽  
pp. 487-490
Author(s):  
Nicolae Avram ◽  
Simona Codruta Heghes ◽  
Luca-Liviu Rus ◽  
Anca Maria Juncan ◽  
Lucia Maria Rus ◽  
...  
Keyword(s):  
Ammonium Nitrate ◽  
Flow Rate ◽  
Chromatographic Analysis ◽  
Mobile Phase ◽  
Limit Of Detection ◽  
Ion Pair ◽  
Limit Of Quantification ◽  
System Suitability ◽  
Dextromethorphan Hydrobromide

A HPLC-UV method, for determination of dextromethorphan hydrobromide in syrup, was validated. The chromatographic analysis was performed using an RP-18, Nucleodur chromatographic column (250 mm � 4 mm, 5 �m) at constant temperature (50oC) with a mobile phase consisting of a mixture of acetonitrile/methanol (70:30 v/v) with sodium docusate (as ion pair agent) and ammonium nitrate, pH = 3.4. The flow rate of the mobile phase was 1 mL/min and the detection was carried out at 280 nm. System suitability, specificity, linearity, precision, accuracy, limit of detection and limit of quantification agreed with current pharmacopeial requests. The method is suitable for routine analysis of dextromethorphan hydrobromide in syrup.

scholarly journals Box-Behnken Assisted Validation and Optimization of an RP-HPLC Method for Simultaneous Determination of Domperidone and Lansoprazole

Separations ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 5
Author(s):  
Mohd Afzal ◽  
Mohd. Muddassir ◽  
Abdullah Alarifi ◽  
Mohammed Tahir Ansari
Keyword(s):  
Flow Rate ◽  
Mobile Phase ◽  
Limit Of Detection ◽  
Hplc Method ◽  
Box Behnken Design ◽  
Rp Hplc ◽  
System Suitability ◽  
Method Optimization ◽  
Key Variables

A highly specific, accurate, and simple RP-HPLC technique was developed for the real-time quantification of domperidone (DOMP) and lansoprazole (LANS) in commercial formulations. Chromatographic studies were performed using a Luna C8(2), 5 μm, 100Å, column (250 × 4.6 mm, Phenomenex) with a mobile phase composed of acetonitrile/2 mM ammonium acetate (51:49 v/v), pH 6.7. The flow rate was 1 mL·min−1 with UV detection at 289 nm. Linearity was observed within the range of 4–36 µg·mL−1 for domperidone and 2–18 µg·mL−1 for lansoprazole. Method optimization was achieved using Box-Behnken design software, in which three key variables were examined, namely, the flow rate (A), the composition of the mobile phase (B), and the pH (C). The retention time (Y1 and Y3) and the peak area (Y2 and Y4) were taken as the response parameters. We observed that slight alterations in the mobile phase and the flow rate influenced the outcome, whereas the pH exerted no effect. Method validation featured various ICH parameters including linearity, limit of detection (LOD), accuracy, precision, ruggedness, robustness, stability, and system suitability. This method is potentially useful for the analysis of commercial formulations and laboratory preparations.

scholarly journals Determination of Enalapril maleate from tablets using a new HPLC method

2021 ◽  
Vol 32 (1) ◽  
pp. 70-75
Author(s):  
Simona Gherman ◽  
Daniela Zavastin ◽  
Adrian Şpac ◽  
Alina Diana Panainte
Keyword(s):  
Detection Limit ◽  
Mobile Phase ◽  
Limit Of Detection ◽  
Hplc Method ◽  
Calibration Graph ◽  
Limit Of Quantification ◽  
Enalapril Maleate ◽  
Ich Guidelines ◽  
System Suitability

Abstract For the determination of enalapril maleate in tablets a new, simple and economical HPLC method was developed and fully validated. Chromatographic separation was achieved on Hewlett Zorbax SB-C 18 (150 x 4.6 mm, 5 μm) column and the mobile phase consisted of acetonitrile: 0.025 M phosphate buffer adjusted to pH 3 (70:30 v/v) pumped at a flow rate 0.8 mL/min and UV-detection was performed at 210 nm. The proposed method was validated according to ICH guidelines (linearity, limit of detection, limit of quantification, precision, accuracy, recovery and system suitability). The total run time was less than 3 min and the retention time for Enalapril maleate was 2.3 min. The calibration graph was linear in the concentration range between 10 – 100 μg/mL with the correlation coefficient r2 = 0.9998. The developed and validated method was successfully applied to determine the Enalapril maleate in tablets. Therefore, this method proved to be sensitive, specific and reproducible and can be applied for routine analysis of enalapril maleate from pharmaceutical formulation due to its simplicity of application.

scholarly journals RP-HPLC METHOD FOR SIMULTANEOUS ESTIMATION OF RITONAVIR, OMBITASVIR AND PARITAPREVIR IN TABLET DOSAGE FORMS AND THEIR STRESS DEGRADATION STUDIES

2019 ◽  
pp. 193-210
Author(s):  
SYED IBRAHIM BAJE ◽  
B. JYOTHI ◽  
N. MADHAVI
Keyword(s):  
Flow Rate ◽  
Mobile Phase ◽  
High Performance ◽  
Limit Of Detection ◽  
Hplc Method ◽  
Array Detector ◽  
Simultaneous Estimation ◽  
Limit Of Quantification ◽  
Rp Hplc

Objective: The objective of the present study was to develop and validate a novel reverse phase high performance liquid chromatographic (RP-HPLC) method, for simultaneous determination of ritonavir (RIT), ombitasvir (OMB) and paritaprevir (PAR) in bulk mixtures, and in tablets. Methods: Determination of the drugs ritonavir (RIT), ombitasvir (OMB), and paritaprevir (PAR), was carried out applying Hypersil BDS C18 column (250 mm X 4.6 mm i.e., 5 µm particle size), with photodiode array detector at λmax of 254 nm. The mobile phase applied for the current study composed of two solvents, i.e. A (0.01N % w/v potassium di-hydrogen orthophosphate buffer, pH 3.0 adjusted with dilute orthophosphoric acid) and B (acetonitrile). The mobile phase was pumped at a flow rate of 1.0 ml/min in the isocratic mode. The validation study with respect to specificity, linearity, precision, accuracy, and robustness, limit of detection (LOD) and limit of quantification (LOQ) was carried out employing the ICH guidelines. Results: Ritonavir, ombitasvir, and paritaprevir showed linearity of response between 12.5-75 μg/ml for ritonavir, 3.125-18.75 µg/ml for ombitasvir and 18.75–112.5 µg/ml for paritaprevir, with a correlation coefficient (R2) 0.999, 0.999,0.999 for RIT, OMB, and PAR respectively. The % recovery obtained was 99.82±0.14 % RIT, OMB 100.03±0.96 % and for 99.96±0.26 % PAR. The LOD and LOQ values for RIT, OMB, PAR were obtained to be 0.02, 0.019and0.02, µg/ml and 0.07, 0.06 and 0.07 µg/ml, respectively. The method also exhibits good robustness for different chromatographic conditions like wavelength, flow rate, mobile phase, and injection volume. Conclusion: The method was successfully employed, for the quantification of RIT, OMB, and PAR, in the quality control of in-house developed tablets, and can be applied for the industrial use.

Optimum HPLC Conditions for Determination of Dibucaine HCL, Fluocortolone Pivalate and Fluocortolone Caproate by Using Experimental Design

2018 ◽  
Vol 15 (1) ◽  
pp. 32-38 ◽  
Author(s):  
Bürge Aşçı ◽  
Mesut Koç
Keyword(s):  
Experimental Design ◽  
Flow Rate ◽  
Mobile Phase ◽  
High Performance ◽  
Limit Of Detection ◽  
Pharmaceutical Preparations ◽  
Acid Mixture ◽  
Solution Stability ◽  
Uv Detector

Introduction:This paper presents the development and validation of a novel, fast, sensitive and accurate high performance liquid chromatography (HPLC) method for the simultaneous quantitative determination of dibucaine HCl, fluocortolone pivalate and fluocortolone caproate in pharmaceutical preparations.Experiment:Development of the chromatographic method was based on an experimental design approach. A five-level-three-factor central composite design requiring 20 experiments in this optimization study was performed in order to evaluate the effects of three independent variances including mobile phase ratio, flow rate and amount of acid in the mobile phase.Conclusion:The optimum composition for mobile phase was found as a methanol:water:acetic acid mixture at 71.6 : 26.4 : 2 (v/v/v) ratio and optimum separation was acquired by isocratic elution with a flow rate of 1.3 mL/min. The analytes were detected using a UV detector at 240 nm. The developed method was validated in terms of linearity, precision, accuracy, limit of detection/quantitation and solution stability and successfully applied to the determination of dibucaine HCl, fluocortolone pivalate and fluocortolone caproate in pharmaceutical topical formulations such as suppositories and ointments.

scholarly journals Photostability study of amlodipine besylate tablets packed in primary packaging

2021 ◽  
Vol 10 (1) ◽  
pp. 20-28
Author(s):  
Ivana Savić-Gajić ◽  
Ivan Savić ◽  
Predrag Sibinović ◽  
Valentina Marinković
Keyword(s):  
Mobile Phase ◽  
Limit Of Detection ◽  
Degradation Products ◽  
Hplc Method ◽  
Coefficient Of Determination ◽  
Amlodipine Besylate ◽  
Limit Of Quantification ◽  
First Order Kinetics ◽  
The Given

In this study, the modified stability-indicating RP-HPLC method was validated for quantitative analysis of amlodipine besylate in the presence of its impurity D (3-ethyl 5-methyl 2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methylpyridine-3,5-dicarboxylate). The method was applied for the determination of an analyte in the tablets and irradiated samples packed in the primary packaging (Alu/PVC/PVDC blister packaging). The efficient chromatographic separation was achieved using a ZORBAX Eclipse XDB-C18 column (4.6×250 mm, 5 mm) with isocratic elution of mobile phase which consisted of acetonitrile:methanol:triethylamine solution (15:35:50, v/v/v) (pH 3.0). The flow rate of the mobile phase was 1 mL min-1, while the detection of amlodipine besylate was carried out at 273 nm. Amlodipine besylate and its impurity D were identified at the retention times of 16.529 min and 2.575 min, respectively. The linearity of the method with the coefficient of determination of 0.999 was confirmed in the concentration range of 10 - 75 µg mL-1 for amlodipine besylate. The limit of detection was 0.2 µg mL-1, while the limit of quantification was 0.66 µg mL-1. After UV and Vis radiation of the tablets packed in the primary packaging, the content of amlodipine besylate was reduced by 22.38% and 19.89%, respectively. The presence of new degradation products was not detected under the given chromatographic conditions. The photodegradation of amlodipine besylate followed pseudo-first-order kinetics. Based on the half-life of amlodipine besylate (38.4 days for UV radiation and 43.3 days for Vis radiation), it was concluded that amlodipine besylate in the tablets has satisfactory photostability after its packing in the Alu/PVC/PVDC blister packaging.

scholarly journals Validated TLC-densitometry method for determination of cetirizine dihydrochloride in tablet dosage form

2013 ◽  
Vol 3 (1) ◽  
pp. 208-210
Author(s):  
Nia Kristiningrum ◽  
Ellsy Novita Martyanti
Keyword(s):  
Mobile Phase ◽  
Limit Of Detection ◽  
Pharmaceutical Journal ◽  
Limit Of Quantification ◽  
Quality Control Testing ◽  
Relative Standard ◽  
Tablet Formulations ◽  
Tablet Dosage ◽  
Chloroform Methanol

A rapid, reproducible and accurate TLC method was developed for the determination of Cetirizine Dihydrochloride in tablet. The analytes were dissolved with ethanol 70% and chromatographed on silica Gel GF 254 TLC plate using chloroform : methanol : ethyl acetate in the ratio of 2 : 7 : 3 (v/v) as mobile phase. Quantitative analysis was done through densitometric measurement at wavelength 234 nm. Method was found linear over the concentration range of 400 – 1600 ng/spot with the correlation coefficient of 0.996. Specificity showed calculation of purity and identity more than 0.99. The limit of detection (LOD) and the limit of quantification (LOQ) of the method were 75.54 and 226.64 ng/spot. The relative standard deviation of this method was 0.86% whereas the means of the recovery data was 100.54 ± 0.11%. The proposed method has been applied to the determination of Cetirizine Dihydrochloride in commercial tablet formulations and the result were 96.97 ± 0.86 % for brand A and 100.57 ± 1.17 % for brand B. The developed method was successfully used for the assay of Cetirizine Dihydrochloride. This method is simple, sensitive and precise; it can be used for the routine quality control testing of marketed formulations.DOI: http://dx.doi.org/10.3329/icpj.v3i1.17294 International Current Pharmaceutical Journal, December 2013, 3(1): 208-210

scholarly journals Micellar Liquid Chromatographic Determination of Carbaryl and 1-Naphthol in Water, Soil, and Vegetables

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Mei-Liang Chin-Chen ◽  
Maria Rambla-Alegre ◽  
Abhilasha Durgbanshi ◽  
Devasish Bose ◽  
Sandeep K. Mourya ◽  
...  
Keyword(s):  
Mobile Phase ◽  
Limit Of Detection ◽  
Cetylpyridinium Chloride ◽  
Sodium Dodecyl ◽  
Chromatographic Determination ◽  
Limit Of Quantification ◽  
Chromatographic Procedure ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic

A liquid chromatographic procedure has been developed for the determination of carbaryl, a phenyl-N-methylcarbamate, and its main metabolite 1-naphthol, using a C18 column (250’mm’ × ’4.6’mm) with a micellar mobile phase and fluorescence detection at maximum excitation/emission wavelengths of 225/333’nm, respectively. In the optimization step, surfactants sodium dodecyl sulphate (SDS), Brij-35 andN-cetylpyridinium chloride monohydrate, and organic solvents propanol, butanol, and pentanol were considered. The selected mobile phase was 0.15’M SDS-6% (v/v)-pentanol-0.01’M NaH2PO4buffered at pH 3. Validation studies, according to the ICH Tripartite Guideline, included linearity (r>0.999), limit of detection (5 and 18’ng mL-1, for carbaryl and 1-naphthol, resp.), and limit of quantification (15 and 50’ng mL-1, for carbaryl and 1-naphthol, resp.), with intra- and interday precisions below 1%, and robustness parameters below 3%. The results show that the procedure was adequate for the routine analysis of these two compounds in water, soil, and vegetables samples.

scholarly journals Validation of a Thin-Layer Chromatography for the Determination of Hydrocortisone Acetate and Lidocaine in a Pharmaceutical Preparation

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Małgorzata Dołowy ◽  
Katarzyna Kulpińska-Kucia ◽  
Alina Pyka
Keyword(s):  
Chromatographic Analysis ◽  
Limit Of Detection ◽  
Pharmaceutical Preparation ◽  
Lidocaine Hydrochloride ◽  
Hydrocortisone Acetate ◽  
Limit Of Quantification ◽  
Bioactive Substances ◽  
Densitometric Detection ◽  
Layer Chromatography

A new specific, precise, accurate, and robust TLC-densitometry has been developed for the simultaneous determination of hydrocortisone acetate and lidocaine hydrochloride in combined pharmaceutical formulation. The chromatographic analysis was carried out using a mobile phase consisting of chloroform + acetone + ammonia (25%) in volume composition 8 : 2 : 0.1 and silica gel 60F254plates. Densitometric detection was performed in UV at wavelengths 200 nm and 250 nm, respectively, for lidocaine hydrochloride and hydrocortisone acetate. The validation of the proposed method was performed in terms of specificity, linearity, limit of detection (LOD), limit of quantification (LOQ), precision, accuracy, and robustness. The applied TLC procedure is linear in hydrocortisone acetate concentration range of3.75÷12.50 μg·spot−1, and from1.00÷2.50 μg·spot−1for lidocaine hydrochloride. The developed method was found to be accurate (the value of the coefficient of variation CV [%] is less than 3%), precise (CV [%] is less than 2%), specific, and robust. LOQ of hydrocortisone acetate is 0.198 μg·spot−1and LOD is 0.066 μg·spot−1. LOQ and LOD values for lidocaine hydrochloride are 0.270 and 0.090 μg·spot−1, respectively. The assay value of both bioactive substances is consistent with the limits recommended by Pharmacopoeia.

scholarly journals Development and validation of novel RP-UPLC method for estimation of atropine sulphate in pharmaceutical dosage form

2013 ◽  
Vol 19 (3) ◽  
pp. 333-337 ◽  
Author(s):  
A.C. Arvadiya ◽  
P.P. Dahivelker
Keyword(s):  
Mobile Phase ◽  
Dosage Form ◽  
Limit Of Detection ◽  
Atropine Sulphate ◽  
Limit Of Quantification ◽  
Pharmaceutical Dosage Form ◽  
Column Temperature ◽  
Ich Guidelines ◽  
Development And Validation

A simple, precise, accurate, sensitive and repeatable RP-UPLC method was developed for quantitative determination of atropine sulphate in pharmaceutical dosage form. The method was developed by using C18 column Hiber HR Purospher Star (100mm?2.1mm id, 2?m particle size) as stationary phase with Phosphate Buffer: Acetonitrile (87:13, %v/v) as a mobile phase, pH was adjusted to 3.5 by ortho-phosphoric acid at a flow rate of 0.5 mL/min and column temperature maintained at 30?C. Quantification of eluted compound was achieved with PDA detector at 210 nm. Atropine sulphate followed linearity in concentration range of 2.5-17.5 ?g/mL with r2=0.9998 (n=6). Limit of detection (LOD) and limit of quantification (LOQ) values were 0.0033 and 0.0102 ?g/mL for atropine sulphate. The validation study is carried out as per International Conference on Harmonization (ICH) guidelines. This method was successfully applied for estimation of atropine sulphate in pharmaceutical formulation.

Simple and Fast Determination of Terbinafine in Human Urine by Dilute and Shoot HPLC-DAD Using a Core-Shell Column

2020 ◽  
Vol 23 ◽  
Author(s):  
Sercan Yıldırım ◽  
Gökhan Demirdaş ◽  
Mert Fidan ◽  
Ahmet Yaşar
Keyword(s):  
Flow Rate ◽  
Human Urine ◽  
Mobile Phase ◽  
Limit Of Detection ◽  
Therapeutic Drug ◽  
Core Shell ◽  
Pharmacokinetic Studies ◽  
Fast Method ◽  
Fast Determination

Background: Terbinafine is an allylamine antifungal which is effective against many fungi, dermatophytes and moulds. Analytical methods are required for the determination of terbinafine in biological fluids to perform therapeutic drug monitoring and pharmacokinetic studies. Objective: The aim of this study was to develop and validate a novel and fast method combining dilute and shoot approach and high-performance liquid chromatography coupled with photodiode array detection for the determination of terbinafine in human urine. Methods: Chromatographic parameters including mobile phase composition, pH, flow rate and injection volume was assessed and optimized. The separation of terbinafine and naproxen (internal standard) was achieved within 3 min using a C18 core-shell column (Raptor ARC-18, 100 x 4.6 mm, 2.7 µm) under isocratic conditions. Samples were eluted from the column at the flow rate of 1.4 mL/min using a mobile phase containing 0.2% triethylamine in water (pH 3.4 with formic acid): acetonitrile (45:55, v/v). Results: Presented technique was linear in the range of 25-2000 ng/mL. Intra- and inter-day reproducibility at four quality control levels (25, 200, 750 and 1500 ng/mL) was less than 7%, with relative errors ranging from -5.40% to 5.91%. Limit of detection was 12.60 ng/mL. Developed method has three main advantages compared to existing methods: simplicity and greenness of sample preparation, use of core-shell column and short analysis time. Conclusion: The results of this study indicate that the combination of dilute and shoot approach and core-shell column can be regarded as an advantageous application for the fast determination of terbinafine in urine.

Sign in / Sign up

Export Citation Format

Share Document