Assessment of the Reinforced Slope Stability Under Earthquake Loading

2021 ◽  
Vol 8 (2) ◽  
Author(s):  
Ankita Gupta ◽  
Vinay Bhushan Chauhan
Keyword(s):  
Urban Areas ◽  
Slope Angle ◽  
Failure Surface ◽  
Earthquake Loading ◽  
Soil Slope ◽  
Earthquake Hazards ◽  
Ground Acceleration ◽  
Reinforced Slope ◽  
The Stability ◽  
Vertical Spacing

Failure of the soil slopes by dynamic excitation is one of the most vital geotechnical earthquake hazards which may lead to serious destruction to the bridge abutments, dams, embankment, and structures resting on the slope. Moreover, due to deficient space available for the construction of slopes in urban areas, high and steep slope is constructed by geotextile reinforcement slopes. In this study, numerical modelling is made to study the behaviour of soil slope reinforced by geotextile under earthquake loading using the finite element method available in, optumG2. The value of the factor of safety (FOS) for unreinforced soil slope is calculated using the strength reduction method (SRM) at slope angle (β = 60°) and the height of the slope is 10 m. In the unreinforced slope, a critical failure surface was obtained due to which slope is reinforced with geotextile under static and earthquake loading. Furthermore, a parametric analysis is carried out to evaluate the effect on different lengths of geotextile and different vertical spacing for the stability of reinforced slope with horizontal ground acceleration coefficient (0.1-0.4). From the outcomes of the present study, it is noted that a stable slope can be achieved with an optimized configuration of the reinforcement under seismic loading, also a steeper slope can be achieved using reinforcement compared to that of an unreinforced slope.

scholarly journals Failure Mechanism and Factor of Safety for Spatially Variable Undrained Soil Slope

2019 ◽  
Vol 2019 ◽  
pp. 1-17 ◽  
Author(s):  
Liang Li ◽  
Xuesong Chu
Keyword(s):  
Random Field ◽  
Failure Mechanism ◽  
Factor Of Safety ◽  
Limit Equilibrium ◽  
Vertical Direction ◽  
Failure Surface ◽  
Cohesive Soil ◽  
Soil Slope ◽  
The Stability ◽  
Undrained Soil

This paper aims to investigate the differences in factor of safety (FS) and failure mechanism (FM) for spatially variable undrained soil slope between using finite element method (FEM) , finite difference method (FDM), and limit equilibrium method (LEM). The undrained shear strength of cohesive soil slope is modeled by a one-dimensional random field in the vertical direction. The FS and FM for a specific realization of random field are determined by SRT embedded in FEM- and FDM-based software (e.g., Phase2 6.0 and FLAC) and LEM, respectively. The comparative study has demonstrated that the bishop method (with circular failure surface) exhibits performance as fairly good as that of SRT both in FS and FM for the undrained slope cases where no preferable controlling surfaces such as hydraulic tension crack and inclined weak seams dominate the failure mechanism. It is, however, worthwhile to point out that unconservative FM is provided by the Bishop method from the aspect of failure consequence (i.e., the failure consequence indicated by the FM from the Bishop method is smaller than that from SRT). The rigorous LEM (e.g., M-P and Spencer method with noncircular failure surface) is not recommended in the stability analysis of spatially variable soil slopes before the local minima and failure to converge issues are fully addressed. The SRT in combination with FEM and/or FDM provides a rigorous and powerful tool and is highly preferable for slope reliability of spatially variable undrained slope.

Calculation and Optimization of Soil Slope Stability on One Iron Mine

2014 ◽  
Vol 644-650 ◽  
pp. 1998-2002
Author(s):  
Shi Qing Nan ◽  
Juan Xia Zhang ◽  
Xian Zhang Guo ◽  
Tian Hong Yang
Keyword(s):  
Slope Stability ◽  
Slope Angle ◽  
Simulation Method ◽  
Open Pit ◽  
Open Pit Mining ◽  
Soil Slope ◽  
Deformation And Failure ◽  
Main Research ◽  
Iron Mine ◽  
The Stability

The purpose of slope stability evaluation was that, according to the slope engineering condition and constraints of mining technology, to study the deformation and failure rule of slope occurred by the change of stress field during the open-pit mining. The main research object of the paper was open-pit slope of one iron mine, for the mechanical parameters of the slope, it was obtained by physical experiments, and the numerical simulation method was used for the stability analysis and evaluation of quaternary soil slope angle and final slope angle. And some measures were proposed for slope stability during construction to ensure safety in production. The research of the paper has certain reference significance for optimization calculation of the soil slope stability

scholarly journals Seismic Behavior of Flexible Geogrid Wrap-Reinforced Soil Slope

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Liang Huang ◽  
Weili He ◽  
Yujie Hou ◽  
Dun Liu ◽  
Bo Wang ◽  
...  
Keyword(s):  
Failure Surface ◽  
Reinforced Soil ◽  
Shaking Table ◽  
Seismic Load ◽  
Soil Slope ◽  
Upper Bound Theorem ◽  
Distribution Law ◽  
Soil Slopes ◽  
Earthquake Action ◽  
The Stability

In this study, the failure mode of flexible reinforced soil slopes under earthquake action was investigated by shaking table tests. The distribution law of a potential failure surface of a flexible no-faceplate reinforced soil slope under earthquake action was obtained based on the analysis results. A simplified trilinear failure surface suitable for flexible reinforced soil slopes without faceplate was proposed. Subsequently, based on the upper-bound theorem of limit analysis, we derived the formula for calculating the yield seismic acceleration coefficient of a flexible no-faceplate reinforced soil slope under a seismic load. The main parameters that affect its seismic performance were determined. The flexible geogrid reverse-packed reinforced earth structure can effectively limit the fracture of a slope body and improve the stability of the slope. This provides a theoretical basis for facilitating the engineering of flexible reinforced soil slopes.

Slope Stability Analysis under the Condition of Seepage

2012 ◽  
Vol 204-208 ◽  
pp. 241-245
Author(s):  
Yang Jin
Keyword(s):  
Finite Element Method ◽  
Shear Strength ◽  
Slope Stability ◽  
Negative Impact ◽  
Strength Reduction ◽  
Soil Slope ◽  
Failure State ◽  
Calculation Results ◽  
The Stability ◽  
Shear Strength Reduction

The stability of soil slope under seepage is calculated and analyzed by using finite element method based on the technique of shear strength reduction. When the condition of seepage or not is considered respectively, the critical failure state of slopes and corresponding safety coefficients can be determined by the numerical analysis and calculation. Besides, through analyzing and comparing the calculation results, it shows that seepage has a negative impact on slope stability.

Soil Strength Reduction Method Induced by Variation of Water Content

2012 ◽  
Vol 170-173 ◽  
pp. 847-852
Author(s):  
Peng Ming Jiang ◽  
Zhong Lei Yan ◽  
Peng Li
Keyword(s):  
Slope Stability ◽  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Characteristic Curve ◽  
Strength Reduction ◽  
Actual State ◽  
Soil Slope ◽  
Simple Method ◽  
The Common ◽  
The Stability

As the complexity of unsaturated soil theory, and it must have a long test period when we study the unsaturated soils, so the conventional design analysis software does not provide such analysis, so we can imagine that such a slope stability analysis does not accurately reflect the actual state of the slope. Based on the known soil moisture content，this paper use the soil water characteristic curve and strength theory of unsaturated soil to calculate the strength reduction parameters of soil which can calculate the stability of the soil slope when using the common calculation method. It is noticeable that this method can be extended and applied if we establish regional databases for this simple method, and these databases can improve the accuracy of the calculation of slope stability.

scholarly journals Reliability Estimation of Reinforced Slopes to Prioritize Maintenance Actions

2021 ◽  
Vol 18 (2) ◽  
pp. 373
Author(s):  
Farshad BahooToroody ◽  
Saeed Khalaj ◽  
Leonardo Leoni ◽  
Filippo De Carlo ◽  
Gianpaolo Di Bona ◽  
...  
Keyword(s):  
Urban Areas ◽  
Evaluation Method ◽  
Likelihood Function ◽  
Reliability Estimation ◽  
Analytical Models ◽  
Geotechnical Structures ◽  
Reinforced Slopes ◽  
The Stability ◽  
Methods Analytical ◽  
Asset Managers

Geosynthetics are extensively utilized to improve the stability of geotechnical structures and slopes in urban areas. Among all existing geosynthetics, geotextiles are widely used to reinforce unstable slopes due to their capabilities in facilitating reinforcement and drainage. To reduce settlement and increase the bearing capacity and slope stability, the classical use of geotextiles in embankments has been suggested. However, several catastrophic events have been reported, including failures in slopes in the absence of geotextiles. Many researchers have studied the stability of geotextile-reinforced slopes (GRSs) by employing different methods (analytical models, numerical simulation, etc.). The presence of source-to-source uncertainty in the gathered data increases the complexity of evaluating the failure risk in GRSs since the uncertainty varies among them. Consequently, developing a sound methodology is necessary to alleviate the risk complexity. Our study sought to develop an advanced risk-based maintenance (RBM) methodology for prioritizing maintenance operations by addressing fluctuations that accompany event data. For this purpose, a hierarchical Bayesian approach (HBA) was applied to estimate the failure probabilities of GRSs. Using Markov chain Monte Carlo simulations of likelihood function and prior distribution, the HBA can incorporate the aforementioned uncertainties. The proposed method can be exploited by urban designers, asset managers, and policymakers to predict the mean time to failures, thus directly avoiding unnecessary maintenance and safety consequences. To demonstrate the application of the proposed methodology, the performance of nine reinforced slopes was considered. The results indicate that the average failure probability of the system in an hour is 2.8×10−5 during its lifespan, which shows that the proposed evaluation method is more realistic than the traditional methods.

DISLOCATION OF FACE-SLABS OF ZIPINGPU CONCRETE FACE ROCKFILL DAM DURING WENCHUAN EARTHQUAKE

2012 ◽  
Vol 06 (02) ◽  
pp. 1250007 ◽  
Author(s):  
DEGAO ZOU ◽  
YANG ZHOU ◽  
HOE I. LING ◽  
XIANJING KONG ◽  
BIN XU
Keyword(s):  
Wenchuan Earthquake ◽  
Limit Equilibrium ◽  
Failure Surface ◽  
Ground Acceleration ◽  
Factors Affecting ◽  
2008 Wenchuan Earthquake ◽  
Rockfill Dam ◽  
Concrete Face ◽  
Concrete Face Rockfill Dam ◽  
Water Elevation

Zipingpu concrete face rockfill dam (CFRD) is one of the tallest dams that have ever been subjected to strong earthquake shaking and recorded damages. In this paper, finite element method and limit equilibrium method are used to determine the most critical failure surface for Zipingpu CFRD during the 2008 Wenchuan earthquake in China. The dislocation damage of the face-slab joint was then obtained from the sliding block analysis. The major factors affecting dislocation displacement of face-slabs were analyzed. The results showed that the rigid sliding block method is relevant for analyzing the damage of face-slabs of CFRD during earthquake. The peak ground acceleration had a significant influence on the dislocation. As the acceleration of the dam increases with the height while the strength of face-slab joints reduces, the dislocation could easily occur when the upstream slope of the dam started to slide. The water elevation had considerable impact on the dislocation of face-slabs during strong shaking. There might be no dislocation of face-slabs at full reservoir, and the water elevation just above construction joints would induce larger damage.

Nonlinear Site Effects from the 30 November 2018 Anchorage, Alaska, Earthquake

2021 ◽  
Author(s):  
John D. Thornley ◽  
Utpal Dutta ◽  
John Douglas ◽  
Zhaohui (Joey) Yang
Keyword(s):  
Site Response ◽  
Strong Motion ◽  
North American Plate ◽  
Peak Ground Velocity ◽  
Reference Station ◽  
Earthquake Hazards ◽  
Ground Acceleration ◽  
Nonlinear Site Response ◽  
Generalized Inversion Technique ◽  
Versus Peak

ABSTRACT Anchorage, Alaska, is a natural laboratory for recording strong ground motions from a variety of earthquake sources. The city is situated in a tectonic region that includes the interface and intraslab earthquakes related to the subducting Pacific plate and crustal earthquakes from the upper North American plate. The generalized inversion technique was used with a local rock reference station to develop site response at >20 strong-motion stations in Anchorage. A database of 94 events recorded at these sites from 2005 to 2019 was also compiled and processed to compare their site response with those in the 2018 Mw 7.1 event (main event). The database is divided into three datasets, including 75 events prior to the main event, the main event, and 19 aftershocks. The stations were subdivided into the site classes defined in the National Earthquake Hazards Reduction Program based on estimated average shear-wave velocity in of the upper 30 m (VS30), and site-response results from the datasets were compared. Nonlinear site response was observed at class D and DE sites (VS30 of 215–300 and 150–215  m/s, respectively) but not at class CD and C sites (VS30 of 300–440 and 440–640  m/s, respectively). The relationship of peak ground acceleration versus peak ground velocity divided by VS30 (shear-strain proxy) was shown to further support the observation that sites with lower VS30 experienced nonlinear site response.

scholarly journals Farms as a resilience factors to land degradation in peri-urban areas

2013 ◽  
Vol 44 (2s) ◽  
Author(s):  
Paolo Zappavigna ◽  
Andrea Brugnoli
Keyword(s):  
Urban Areas ◽  
Structural Characteristics ◽  
Labour Force ◽  
Social Characteristics ◽  
The Family ◽  
External Conditions ◽  
Resilience Factors ◽  
The Stability ◽  
Economic Size

The purpose of this study was the analysis of the effects induced by urban pressures on the socio-economic and territorial characteristics of the rural peri-urban areas in order to identify planning and intervention strategies aimed at enhancing the quality of agriculture and landscape. A survey was conducted in the surroundings of Parma on farms located in the vicinity of urban areas. The structural, productive and social characteristics of the family-farm units were analyzed. The survey updated an identical survey, carried out in 1986, in which it was examined a sample of 208 farms. The units surveyed were evaluated in two aspects: the “vitality”, which takes into account the structural characteristics (size, production, labour force, etc.), and the “stability”, in which a crucial role is played by the age of the conductor and the presence of a successor. It was found that only 28% of the original farm sample is still alive, one third has disappeared, 30% was absorbed by existing farms, 8% has been abandoned. The factors most favourable to the survival resulted those referred to the vitality, especially the physical and economic size of the farm, the presence of cattle, the percentage of land in property, the presence of young labour. Among the factors that predispose to the abandonment, the urbanization processes were found to be determinants, in terms of expansion of both the built-up area and of that planned as urbanisable. The research has highlighted the importance of the vitality of the farms together with a context that has maintained its original rural features. These combined aspects can better define what we call the resiliency of the landfarms system i.e. the capability of positively reacting to the variable modifications of the internal and external conditions.

scholarly journals STABILITY OF HIGH DENSITY CUBES IN RUBBLE MOUND BREAKWATERS

2020 ◽  
pp. 4
Author(s):  
Yalcin Yuksel ◽  
Marcel van Gent ◽  
Esin Cevik ◽  
H. Alper Kaya ◽  
Irem Gumuscu ◽  
...  
Keyword(s):  
Relative Density ◽  
Slope Angle ◽  
High Density ◽  
Experimental Results ◽  
Normal Density ◽  
Stability Number ◽  
Damage Initiation ◽  
Rubble Mound ◽  
The Stability ◽  
Rubble Mound Breakwaters

The stability number for rubble mound breakwaters is a function of several parameters and depends on unit shape, placing method, slope angle, relative density, etc. In this study two different densities for cubes in breakwater armour layers were tested to determine the influence of the density on the stability. The experimental results show that the stability of high density blocks were found to be more stable and the damage initiation for high density blocks started at higher stability numbers compared to normal density cubes.

Sign in / Sign up

Export Citation Format

Share Document