scholarly journals STUDY AND ANALYSIS ON SOUND ABSORBING AND NOISE REDUCING PERFORMANCE OF TIMBER CONSTRUCTION WALL BASED ON ACOUSTIC SPIRAL MATASURFACE

Wood Research ◽  
2021 ◽  
Vol 66 (3) ◽  
pp. 341-352
Author(s):  
Haiyan Fu ◽  
Xinyue Zhao ◽  
Patrick Adjei ◽  
Zheng Wang ◽  
Xiaoli Wu
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Low Frequency ◽  
Sound Absorption Coefficient ◽  
Impedance Tube ◽  
Frequency Sound ◽  
Timber Construction ◽  
Absorption Performance ◽  
Impedance Tube Method ◽  
Structural Layer

Based on acoustic spiral metasurface, a spiral structural layer was designed to apply to timber construction interior wall. The sound absorption coefficient was measured by impedance tube method and compared with Helmholtz resonance structural layer, solid structural layer and air layer in traditional wall. The results show that the combination of the spiral structural layer and the wall can optimize the sound absorption performance of the wall in the medium and low frequency. Without reducing the overall sound-absorbing performance of the wall, can achieve perfect sound absorption in some medium and low frequency sound bands.

scholarly journals Enhanced Low-Frequency Sound Absorption of a Porous Layer Mosaicked with Perforated Resonator

Polymers ◽  
2022 ◽  
Vol 14 (2) ◽  
pp. 223
Author(s):  
Xin Li ◽  
Bilong Liu ◽  
Qianqian Wu
Keyword(s):  
Porous Material ◽  
Absorption Coefficient ◽  
Porous Layer ◽  
Acoustic Impedance ◽  
Sound Absorption ◽  
Perforated Plate ◽  
Low Frequency ◽  
Sound Absorption Coefficient ◽  
Frequency Sound ◽  
Two Samples

A composite structure composed of a porous-material layer mosaicked with a perforated resonator is proposed to improve the low-frequency sound absorption of the porous layer. This structure is investigated in the form of a porous-material matrix (PM) and a perforated resonator (PR), and the PR is a thin perforated plate filled with porous material in its back cavity. Theoretical and numerical models are established to predict the acoustic impedance and sound absorption coefficient of the proposed structure, and two samples made of polyurethane and melamine, respectively, are tested in an impedance tube. The predicted results are consistent with that of the measured. Compared with a single porous layer with the same thickness, the results show that the designed structure provides an additional sound absorption peak at low frequencies. The proposed structure is compact and has an effective absorption bandwidth of more than two octaves especially below the frequency corresponding to 1/4 wavelength. A comparison is also made between the sound absorption coefficients of the proposed structure and a classical micro-perforated plate (MPP), and the results reveal equivalent acoustic performance, suggesting that it can be used as an alternative to the MPP for low–mid frequency sound absorption. Moreover, the influences of the main parameters on the sound absorption coefficient of PPCS are also analyzed, such as the hole diameter, area ratio, flow resistance, and porous-material thickness in the PR. The mechanism of sound absorption is discussed through the surface acoustic impedance and the distributions of particle velocity and sound pressure at several specific frequencies. This work provides a new idea for the applications of the thin porous layer in low- and medium-frequency sound absorption.

scholarly journals Error Sensing Strategy for Active Control of Low-Frequency Sound Absorption of Micro-Perforated Panel Absorber by Using a Point Force Controlled Thin Plate

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Xiyue Ma ◽  
Kean Chen ◽  
Lei Wang ◽  
Yang Liu
Keyword(s):  
Absorption Coefficient ◽  
Active Control ◽  
Surface Impedance ◽  
Sound Absorption ◽  
Low Frequency ◽  
Point Force ◽  
Sound Absorption Coefficient ◽  
Error Signal ◽  
Frequency Sound ◽  
Highly Correlated

This paper presents an analytical investigation on constructing an error sensing strategy of a new type of active MPPA. The proposed active MPPA is composed of MPP, air cavity, and point force-controlled backing panel, which can actively improve the low-frequency sound absorption of the MPPA. Constructing an appropriate error sensing strategy for obtaining an error signal that is highly correlated with the sound absorption coefficient of the active MPPA is a key problem encountered in practical implementation. The theoretical model of the active MPPA is firstly established using the modal analysis approach. Then, the active control performance and surface impedance characteristics in the controlled condition are analyzed in detail. Finally, the error sensing strategy of the active MPPA is constructed by measuring the surface average impedance ratio with an acoustic vector sensor (AVS). Simulation results show that, due to the antisymmetric property of the vibration of the backing panel on the resonant frequency, the surface impedance of the active MPPA after control also has symmetry or antisymmetry properties. Hence, the surface average impedance ratio of the active MPPA can be measured by using the limited number of acoustic vector sensors (sensing pressure and particle velocity). This variable is also highly correlated with the sound absorption coefficient of the active MPPA and thus can be used to construct the cost function (error signal). The active control result obtained by the proposed error sensing strategy is in good agreement with the theoretically optimal result, which validates the feasibility of this approach.

scholarly journals Study on the sound absorption behavior of multi-component polyester nonwovens: experimental and numerical methods

2018 ◽  
Vol 89 (16) ◽  
pp. 3342-3361 ◽  
Author(s):  
Tao Yang ◽  
Ferina Saati ◽  
Kirill V Horoshenkov ◽  
Xiaoman Xiong ◽  
Kai Yang ◽  
...  
Keyword(s):  
Numerical Methods ◽  
Absorption Coefficient ◽  
Empirical Model ◽  
Surface Impedance ◽  
Sound Absorption ◽  
Low Frequency ◽  
Accurate Method ◽  
Small Error ◽  
Sound Absorption Coefficient ◽  
Acoustical Properties

This study presents an investigation of the acoustical properties of multi-component polyester nonwovens with experimental and numerical methods. Fifteen types of nonwoven samples made with staple, hollow and bi-component polyester fibers were chosen to carry out this study. The AFD300 AcoustiFlow device was employed to measure airflow resistivity. Several models were grouped in theoretical and empirical model categories and used to predict the airflow resistivity. A simple empirical model based on fiber diameter and fabric bulk density was obtained through the power-fitting method. The difference between measured and predicted airflow resistivity was analyzed. The surface impedance and sound absorption coefficient were determined by using a 45 mm Materiacustica impedance tube. Some widely used impedance models were used to predict the acoustical properties. A comparison between measured and predicted values was carried out to determine the most accurate model for multi-component polyester nonwovens. The results show that one of the Tarnow model provides the closest prediction to the measured value, with an error of 12%. The proposed power-fitted empirical model exhibits a very small error of 6.8%. It is shown that the Delany–Bazley and Miki models can accurately predict surface impedance of multi-component polyester nonwovens, but the Komatsu model is less accurate, especially at the low-frequency range. The results indicate that the Miki model is the most accurate method to predict the sound absorption coefficient, with a mean error of 8.39%.

scholarly journals Hybrid acoustic metamaterial as super absorber for broadband low-frequency sound

2017 ◽  
Vol 7 (1) ◽  
Author(s):  
Yufan Tang ◽  
Shuwei Ren ◽  
Han Meng ◽  
Fengxian Xin ◽  
Lixi Huang ◽  
...  
Keyword(s):  
Energy Dissipation ◽  
Absorption Coefficient ◽  
Sound Absorption ◽  
Low Frequency ◽  
Functional Materials ◽  
Theoretical Method ◽  
Acoustic Metamaterials ◽  
Mechanical Stiffness ◽  
Acoustic Metamaterial ◽  
Frequency Sound

Abstract A hybrid acoustic metamaterial is proposed as a new class of sound absorber, which exhibits superior broadband low-frequency sound absorption as well as excellent mechanical stiffness/strength. Based on the honeycomb-corrugation hybrid core (H-C hybrid core), we introduce perforations on both top facesheet and corrugation, forming perforated honeycomb-corrugation hybrid (PHCH) to gain super broadband low-frequency sound absorption. Applying the theory of micro-perforated panel (MPP), we establish a theoretical method to calculate the sound absorption coefficient of this new kind of metamaterial. Perfect sound absorption is found at just a few hundreds hertz with two-octave 0.5 absorption bandwidth. To verify this model, a finite element model is developed to calculate the absorption coefficient and analyze the viscous-thermal energy dissipation. It is found that viscous energy dissipation at perforation regions dominates the total energy consumed. This new kind of acoustic metamaterials show promising engineering applications, which can serve as multiple functional materials with extraordinary low-frequency sound absorption, excellent stiffness/strength and impact energy absorption.

Broadening of the Sound Absorption Bandwidth of the Perforated Panel Using a Membrane-Type Resonator

2018 ◽  
Vol 140 (3) ◽  
Author(s):  
Xuezhi Zhu ◽  
Zhaobo Chen ◽  
Yinghou Jiao ◽  
Yanpeng Wang
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Degrees Of Freedom ◽  
Low Frequency ◽  
Absorption Capacity ◽  
Sound Absorption Coefficient ◽  
Sound Waves ◽  
Frequency Range ◽  
Absorption Bandwidth ◽  
Membrane Type

In order to broaden the sound absorption bandwidth of a perforated panel in the low frequency range, a lightweight membrane-type resonator is installed in the back cavity of the perforated panel to combine into a compound sound absorber (CSA). Because of the great flexibility, the membrane-type resonator can be vibrated easily by the incident sound waves passing through the holes of the perforated panel. In the low frequency range, the membrane-type resonator and the perforated panel constitute a two degrees-of-freedom (DOF)-resonant type sound absorption system, which generates two sound absorption peaks. By tuning the parameters of the membrane type resonator, a wide frequency band having a large sound absorption coefficient can be obtained. In this paper, the sound absorption coefficient of CSA is derived analytically by combining the vibration equation of the membrane-type resonator with the acoustic impedance equation of the perforated panel. The influences of the parameters of the membrane-type resonator on the sound absorption performance of the CSA are numerically analyzed. Finally, the wide band sound absorption capacity of the CSA is validated by the experimental test.

scholarly journals Sound Absorption Performance of Sugar Palm Trunk Fibers

2019 ◽  
Vol 130 ◽  
pp. 01003
Author(s):  
Anditya Endar Prabowo ◽  
Kuncoro Diharjo ◽  
Ubaidillah ◽  
Iwan Prasetiyo
Keyword(s):  
Absorption Coefficient ◽  
Bulk Density ◽  
Sound Absorption ◽  
Random Noise ◽  
Air Gap ◽  
Sound Absorption Coefficient ◽  
Low Frequencies ◽  
Central Java ◽  
Absorption Performance ◽  
Small Medium Enterprises

The purpose of this research is to investigate the effect of bulk density, thickness, and air gap to sound absorption performance on absorber based sugar palm trunk fibers. The fibers were obtained from solid waste on Small-Medium Enterprises of sago flour processing in Klaten, Central Java, Indonesia. The absorber specimens were formed from the fibers using a simple press molding in an oven at 150 °C. According to ISO 10534-2, the absorber samples were tested using two microphones impedance tube with random noise source to get the curve of the sound absorption coefficient. The result shows that the absorption performance can be improved by increasing bulk density and increasing of sample thickness. Especially at low frequencies, improvement of the sound absorption coefficient can be achieved (NAC > 0.8) by applying the air gap behind the sample. The best performance of absorber based sugar palm trunk fiber can be achieved for (1 000 to 6 000) Hz range frequency.

Sound Absorption Characteristics of Porous Steel Manufactured by Lost Carbonate Sintering

2009 ◽  
Vol 1188 ◽  
Author(s):  
Miao Lu ◽  
Carl Hopkins ◽  
Yuyuan Zhao ◽  
Gary Seiffert
Keyword(s):  
Absorption Coefficient ◽  
Pore Size ◽  
Sound Absorption ◽  
Single Layer ◽  
Normal Incidence ◽  
Sound Absorption Coefficient ◽  
Absorption Coefficients ◽  
Impedance Tube ◽  
Absorption Characteristics

AbstractThis paper investigates the sound absorption characteristics of porous steel samples manufactured by Lost Carbonate Sintering. Measurements of the normal incidence sound absorption coefficient were made using an impedance tube for single-layer porous steel discs and assemblies comprising four layers of porous steel discs. The sound absorption coefficient was found not to vary significantly with pore size in the range of 250-1500 μm. In general, the absorption coefficient increases with increasing frequency and increasing thickness, and peaks at specific frequencies depending on the porosity. An increase in porosity tends to increase the frequency at which the sound absorption coefficient reaches this peak. An advantage was found in using an assembly of samples with gradient porosities of 75%-70%-65%-60% as it gave higher and more uniform sound absorption coefficients than an assembly with porosities of 75%.

Application of In Situ Method for Measuring Sound Absorption Coefficient of Direct Piercing Carved Wood Panel with Daun sireh Motif

2013 ◽  
Vol 471 ◽  
pp. 273-278
Author(s):  
Mohd Zamri Bin Jusoh ◽  
Mohamad Ngasri Dimon ◽  
Nazli Bin Che Din ◽  
Toru Otsuru ◽  
You Kok Yeow
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Sound Absorption Coefficient ◽  
Wood Panel ◽  
Natural Sunlight ◽  
Absorption Performance ◽  
Air Circulation ◽  
Lower Frequencies

An application of In-Situ method of measuring sound absorption coefficient on the surface of direct piercing carved wood panel using the concept of ensemble averaged is discussed. The method offer an easier way to measure the absorption performance for each individual aperture of carved wood panel with floral pattern which was replicated from one of the oldest mosque, namely Masjid Abidin located in Terengganu, Malaysia. Two pieces of 20 mm thick of cengal wood (Neobalanocarpus heimii) with 30% and 40% perforation ratio were respectively measured in a reverberation room in order to determine the value of . At lower frequencies (0.1 kHz-1.5 kHz), the measured values of for both direct piercing carved wood panel with floral pattern (Daun Sireh motif) are shown that the sound absoption for both direct piercing carved wood panel are in perform level. From the measurements, clearly, the installation of the direct piercing carved wood panel with floral pattern (Daun Sireh motif) in the Masjid Abidin can provide better air circulation and additional natural sunlight, as well as better sound intelligibility inside the building.

scholarly journals Effect of Thickness and Perforation Size on the Acoustic Absorption Performance of a Micro-Perforated Panel

2021 ◽  
Vol 335 ◽  
pp. 03016
Author(s):  
Yi-San Wong ◽  
Vignesh Sekar ◽  
Se Yong Eh Noum ◽  
Sivakumar Sivanesan
Keyword(s):  
Absorption Coefficient ◽  
Urban Areas ◽  
Sound Absorption ◽  
Rapid Development ◽  
Noise Pollution ◽  
Sound Absorption Coefficient ◽  
Sound Insulation ◽  
Acoustic Absorption ◽  
Psychological Disturbance ◽  
Absorption Performance

In current times, noise pollution is especially apparent in urban areas due to rapid development in transportation, industrialization, and urbanization. The worsening noise pollution is detrimental to human health and behaviour as it can contribute to disorders and psychological disturbance. Thus, noise regulation is crucial and must be addressed with immediate effect. Micro-perforated panels (MPP) can be a potential solution to mitigate noise on a commercial scale. Researchers have addressed the mechanics behind the enhancement of acoustic absorption through micro-perforation and some suggestions have been made, such as the effect of structural variation on sound absorption performance. Hence, this research aims at optimizing the sound absorption performance of an MPP by determining the connection between thickness and perforation size with sound absorption coefficient. Three cases were considered: (i) varying perforation size, (ii) varying thickness, and (iii) varying perforation size and thickness simultaneously. Based on the Maa prediction model, the sound absorption performance for all three cases have been simulated through the MATLAB software. Results show that the increase in both thickness and perforation size together increases the peak value of sound absorption coefficient (SAC). It also shifts the peak towards the higher frequency region and narrows the bandwidth. The findings of this study indicate the potential of thick MPPs as commercial sound absorbers by adjusting the size of perforations. Thicker and sturdier MPPs with optimal acoustic resistance and reactance can act as reliable sound absorbers for sound insulation purposes.

Sign in / Sign up

Export Citation Format

Share Document