scholarly journals Determination of the possibility of manufacturing mesh structures using additive technologies

2020 ◽  
pp. 74-82
Author(s):  
I. V. Gorbatov ◽  
A. A. Pilshchikov ◽  
Yu. A. Orlov ◽  
V. A. Antyufeev ◽  
S. A. Antyufeeva ◽  
...  
Keyword(s):  
Boundary Conditions ◽  
Research Direction ◽  
Additive Technologies ◽  
Minimum Thickness ◽  
Manufactured Products ◽  
Mesh Structures ◽  
Physical Phenomena

In comparison with conventional technologies, additive technologies are based on fundamentally different physical phenomena. One research direction is the determination of the marginal possibilities of complicating the shape of manufactured products. This article discusses the possibility of introducing mesh structures into the volume of a manufactured part, the possibility of manufacturing such structures without additional supporting elements and boundary conditions, i.e. the minimum thickness of the mesh and the largest length of the hanging surface. Another objective was to develop and test a methodology for designing and creating G-codes when developing mesh structures.

Modern determinants of endometrium hyperplastic processes pathogenesis

2016 ◽  
pp. 137-142
Author(s):  
V.O. Benyuk ◽  
◽  
V.M. Goncharenko ◽  
T.R. Nykoniuk ◽  
◽  
...  
Keyword(s):  
Conservative Therapy ◽  
Solid Phase ◽  
Research Direction ◽  
Immunohistochemical Method ◽  
Results Of Treatment ◽  
Treatment And Prevention ◽  
Receptor Phenotype ◽  
The Relationship ◽  
Endometrial Proliferation

The objective: to еxplore the relationship between the activity of endometrial proliferation and the state of the local immune response in the uterus in the conditions berprestasi process. Patients and methods. Examined 228 women of reproductive and perimenopausal age with endometrial pathology using ultrasound and then performing hysteroresectoscopy. Determination of the concentrations of the cytokines IL-1, IL-2, IL-6 and TNF was performed by solid phase ELISA. Results. Found a trend that confirms the loss of sensitivity to hormones at the stage of malignancy of the endometrium and can be used as diagnostic determinants in determining the nature of intrauterine pathology and criterion of the effectiveness of conservative therapy. Conclusion. Improving etiopatogenetice approach to the therapy of hyperplastic proce.sses of endometrium with determination of receptor phenotype of the endometrium is a research direction in modern gynecology, which will help to improve the results of treatment and prevention of intrauterine pathology. Key words: endometrial hyperplasia,the receptors for progesterone and estrogen, immunohistochemical method.

scholarly journals Stiffness Estimation and Equivalence of Boundary Conditions in FEM Models

2021 ◽  
Vol 11 (4) ◽  
pp. 1482
Author(s):  
Róbert Huňady ◽  
Pavol Lengvarský ◽  
Peter Pavelka ◽  
Adam Kaľavský ◽  
Jakub Mlotek
Keyword(s):  
Boundary Condition ◽  
Finite Element ◽  
Boundary Conditions ◽  
Model Updating ◽  
Element Model ◽  
Computational Time ◽  
Stiffness Coefficients ◽  
First Case ◽  
Numerical Approaches

The paper deals with methods of equivalence of boundary conditions in finite element models that are based on finite element model updating technique. The proposed methods are based on the determination of the stiffness parameters in the section plate or region, where the boundary condition or the removed part of the model is replaced by the bushing connector. Two methods for determining its elastic properties are described. In the first case, the stiffness coefficients are determined by a series of static finite element analyses that are used to obtain the response of the removed part to the six basic types of loads. The second method is a combination of experimental and numerical approaches. The natural frequencies obtained by the measurement are used in finite element (FE) optimization, in which the response of the model is tuned by changing the stiffness coefficients of the bushing. Both methods provide a good estimate of the stiffness at the region where the model is replaced by an equivalent boundary condition. This increases the accuracy of the numerical model and also saves computational time and capacity due to element reduction.

Vectorial thin-element approximation: a semirigorous determination of Kirchhoff's boundary conditions

2007 ◽  
Vol 24 (4) ◽  
pp. 1074 ◽  
Author(s):  
Norbert Kerwien ◽  
Thomas Schuster ◽  
Stephan Rafler ◽  
Wolfgang Osten ◽  
Michael Totzeck
Keyword(s):  
Boundary Conditions ◽  
Element Approximation

Generalized plane stress in a semi-infinite strip under arbitrary end-load

1964 ◽  
Vol 281 (1385) ◽  
pp. 184-206 ◽  
Keyword(s):  
Differential Equation ◽  
Ordinary Differential Equation ◽  
Boundary Conditions ◽  
Fourth Order ◽  
Plane Stress ◽  
Stress Function ◽  
Infinite Strip ◽  
Order Ordinary Differential Equation ◽  
Orthogonal Functions

The problem involves the determination of a biharmonic generalized plane-stress function satisfying certain boundary conditions. We expand the stress function in a series of non-orthogonal eigenfunctions. Each of these is expanded in a series of orthogonal functions which satisfy a certain fourth-order ordinary differential equation and the boundary conditions implied by the fact that the sides are stress-free. By this method the coefficients involved in the biharmonic stress function corresponding to any arbitrary combination of stress on the end can be obtained directly from two numerical matrices published here The method is illustrated by four examples which cast light on the application of St Venant’s principle to the strip. In a further paper by one of the authors, the method will be applied to the problem of the finite rectangle.

DETERMINATION OF TECHNOLOGICAL PARAMETERS OF CULINARY PRODUCTS PRODUCTION USING MIXTURES AND EMULSIONS FOR ADDITIVE TECHNOLOGIES

2020 ◽  
pp. 189-198
Author(s):  
A. Meliaschenya ◽  
I. Kaltovich ◽  
G. Pinchuk
Keyword(s):  
Broiler Chicken ◽  
Raw Materials ◽  
Chicken Meat ◽  
Additive Technologies ◽  
Technological Parameters ◽  
Optimal Length ◽  
Layer Width ◽  
Degree Of Hydration ◽  
Rational Sequence

The article presents the results of research on the determination of rational technological parameters for the production of culinary products using dry mixtures and emulsions based on animal raw materials for additive technologies. It was found that when making products using mixtures and emulsions based on broiler chicken meat, as well as a combination of broiler chicken meat and pork, pork and beef (ratio 1:1) rational height of the layer, which makes it possible to ensure stability and safety of the product shape (with a fixed diameter of the opening of the culinary syringe – 7 mm and the optimal length of the layer - 100 mm), is from 14–21 mm (with a layer width of 7 mm) and up to 133–154 mm (with a layer width of 98 mm), which allows for improved structural and mechanical (SSL – 1090.7–1099.9 Pa) and functional and technological indicators of these products (WHC – 92.7–97.5%). The rational sequence of application and the duration of chopping of the main and auxiliary raw materials for the manufacture of emulsions, the duration of preparation (3 minutes), the degree of hydration (1:2 – 1:3) and the temperature of water for the reduction of dry mixtures (60±1° C) were established, which made it possible to develop technological schemes for the production of culinary products using additive technologies.

Sign in / Sign up

Export Citation Format

Share Document