scholarly journals SUSTAINABLE DEVELOPMENT AND ENERGY SECURITY LEVEL AFTER IGNALINA NPP SHUTDOWN

2011 ◽  
Vol 17 (1) ◽  
pp. 5-21 ◽  
Author(s):  
Juozas Augutis ◽  
Ričardas Krikštolaitis ◽  
Sigita Pečiulytė ◽  
Inga Konstantinavičiūtė
Keyword(s):  
Power Plant ◽  
Energy Security ◽  
Nuclear Power ◽  
Integral Characteristic ◽  
Fuel Oil ◽  
Electricity Production ◽  
Security Level ◽  
Heavy Fuel Oil ◽  
Security Indicators ◽  
The Impact

The paper presents the investigation of the impact of Ignalina Nuclear Power Plant (NPP) shutdown on Lithuanian energy security. The system of energy security indicators, covering technical, economic and socio-political aspects is presented. The integral characteristic of these indicators shows the level of energy security. The paper analyses the Lithuanian energy security level in 2007. To make a comparison, the energy security level in 2010, after the shutdown of Ignalina NPP, when Lithuanian Power Plant in Elektrėnai becomes the main electricity producer, is forecasted. Two alternatives are analysed: Lithuanian Power Plant uses either gas or heavy fuel oil for electricity production. The security level of each indicator, each indicator block and the total security level are presented as the result. Energy security indicators, which increased or decreased after the shutdown of Ignalina NPP, are analysed, including the indicators which have had the greatest impact on the change in energy security level. The influence of Ignalina NPP shutdown on CO2 emissions is presented. Also, electricity generating costs for different types of electricity production at a different discount rate are presented.

scholarly journals Eco-Efficiency Assessment of the Application of Large-Scale Rechargeable Batteries in a Coal-Fired Power Plant

Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1384 ◽  
Author(s):  
Piotr Krawczyk ◽  
Anna Śliwińska
Keyword(s):  
Power Plant ◽  
Large Scale ◽  
Fossil Fuels ◽  
Economic Benefits ◽  
Fuel Oil ◽  
Electricity Production ◽  
Hard Coal ◽  
Heavy Fuel Oil ◽  
Efficiency Assessment ◽  
The Impact

This article presents the results of an eco-efficiency assessment of the application of large-scale rechargeable battery technology in electricity generation from coal. The eco-efficiency of electricity production in a 350 MW coal-fired power plant was calculated. Two production variants were compared: with the use of a lithium-ion battery of a 400 MWh capacity to optimize the operation of power blocks and without using the battery. Hard coal is one of the main fossil fuels used to generate electricity in Poland. Despite the growing share of electricity from renewable sources, this situation will persist for many more years. The main reasons for this are the high costs and long-lasting process of moving away from fossil fuels in the energy sector. Therefore, any technical solutions that can temporarily reduce the negative impact of coal-based power engineering on the environment should be considered. At the same time, the economic aspects of such solutions must be taken into account. That is why the eco-efficiency assessment method was chosen, which integrates economic and environmental aspects. The obtained results of the analyses indicate the occurrence of environmental and economic benefits resulting from the use of the battery in coal-fired power plants. It has been found that battery-based technology is more eco-efficient than technology without such a battery. A sensitivity analysis was carried out, which allowed the impact of individual computational variables on the eco-efficiency assessment result to be assessed. The results indicate that fuel prices (coal and heavy fuel oil—mazout) and CO2 emission allowances have the greatest impact on the eco-efficiency of the analyzed technology. It was also found that the factors related to the battery, such as its efficiency, life span, decrease of the capacity after 10 years of operation, and construction cost, have a much smaller impact on the results.

scholarly journals Renewable Energy and Energy Security in Malaysia

2019 ◽  
Vol 8 (4) ◽  
pp. 6309-6315
Keyword(s):  
Renewable Energy ◽  
Energy Security ◽  
Energy Demand ◽  
Secondary Data ◽  
Energy Resources ◽  
Security Level ◽  
Low Carbon ◽  
Increasing Demand ◽  
Security Indicators ◽  
The Impact

Robust economic growth, increasing population and personal consumption are the main drivers for the rapid increase of energy demand in Malaysia. Increasing demand has compounded the issue of national energy security due overdependence on fossil fuel, depleting indigenous domestic conventional energy resources which in turns has increased the country’s energy import dependence. In order to improve its energy security, Malaysia has seriously embarked on a renewable energy journey. Many initiatives on renewable energy have been introduced in the past decade. These strategies have resulted in the exploding growth of renewable energy deployment in Malaysia. Therefore, this study investigated the impact of renewable energy deployment on energy security. Secondary data was used to calculate the energy security indicators. The study also compared the results of applying different energy security indicators namely Availability, Applicability, Affordability and Acceptability dimension of energy resources. The evaluation shows that Malaysia will experience improvement in Energy Security, particularly on Availability, Affordability and Acceptability dimensions of energy security. This study suggests that energy security level could be further enhance by efficient utilization of energy, reducing carbon content of energy and facilitating low-carbon industries.

Seawater Scrubbing for the Removal of Sulfur Dioxide in a Steam Turbine Power Plant

2005 ◽  
Author(s):  
Akili D. Khawaji ◽  
Jong-Mihn Wie
Keyword(s):  
Power Plant ◽  
Sulfur Dioxide ◽  
Steam Turbine ◽  
Flue Gas ◽  
Operating Cost ◽  
Cooling Water ◽  
Cost Savings ◽  
Fuel Oil ◽  
So2 Emissions ◽  
Heavy Fuel Oil

The most popular method of controlling sulfur dioxide (SO2) emissions in a steam turbine power plant is a flue gas desulfurization (FGD) process that uses lime/limestone scrubbing. Another relatively newer FGD technology is to use seawater as a scrubbing medium to absorb SO2 by utilizing the alkalinity present in seawater. This seawater scrubbing FGD process is viable and attractive when a sufficient quantity of seawater is available as a spent cooling water within reasonable proximity to the FGD scrubber. In this process the SO2 gas in the flue gas is absorbed by seawater in an absorber and subsequently oxidized to sulfate by additional seawater. The benefits of the seawater FGD process over the lime/limestone process and other processes are; 1) The process does not require reagents for scrubbing as only seawater and air are needed, thereby reducing the plant operating cost significantly, and 2) No solid waste and sludge are generated, eliminating waste disposal, resulting in substantial cost savings and increasing plant operating reliability. This paper reviews the thermodynamic aspects of the SO2 and seawater system, basic process principles and chemistry, major unit operations consisting of absorption, oxidation and neutralization, plant operation and performance, cost estimates for a typical seawater FGD plant, and pertinent environmental issues and impacts. In addition, the paper presents the major design features of a seawater FGD scrubber for the 130 MW oil fired steam turbine power plant that is under construction in Madinat Yanbu Al-Sinaiyah, Saudi Arabia. The scrubber with the power plant designed for burning heavy fuel oil containing 4% sulfur by weight, is designed to reduce the SO2 level in flue gas to 425 ng/J from 1,957 ng/J.

scholarly journals Comparison and Evaluation of Domestic and Foreign Radiation Environmental Standards for Nuclear Power Plants

2021 ◽  
Vol 2083 (2) ◽  
pp. 022020
Author(s):  
Jiahuan Yu ◽  
Xiaofeng Zhang
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
The United States ◽  
Discharge System ◽  
Radioactive Effluent ◽  
Effluent Discharge ◽  
The Impact

Abstract With the development of the nuclear energy industry and the increasing demand for environmental protection, the impact of nuclear power plant radiation on the environment has gradually entered the public view. This article combs the nuclear power plant radiation environmental management systems of several countries, takes the domestic and foreign management of radioactive effluent discharge from nuclear power plants as a starting point, analyses and compares the laws and standards related to radioactive effluents from nuclear power plants in France, the United States, China, and South Korea. In this paper, the management improvement of radioactive effluent discharge system of Chinese nuclear power plants has been discussed.

Root Cause of Thermal Sleeve Loosening in a Korean Standard Nuclear Power Plant

2006 ◽  
Author(s):  
Sang-Nyung Kim ◽  
Sang-Gyu Lim
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Power Plants ◽  
Measurement Data ◽  
Significant Loss ◽  
Design Modification ◽  
Root Cause ◽  
Explosive Expansion ◽  
The Impact

The safety injection (SI) nozzle of a 1000MWe-class Korean standard nuclear power plant (KSNP) is fitted with thermal sleeves (T/S) to alleviate thermal fatigue. Thermal sleeves in KSNP #3 & #4 in Yeonggwang (YG) & Ulchin (UC) are manufactured out of In-600 and fitted solidly without any problem, whereas KSNP #5 & #6 in the same nuclear power plants, also fitted with thermal sleeves made of In-690 for increased corrosion resistance, experienced a loosening of thermal sleeves in all reactors except KSNP YG #5-1A, resulting in significant loss of generation availability. An investigation into the cause of the loosening of the thermal sleeves only found out that the thermal sleeves were subject to severe vibration and rotation, failing to uncover the root cause and mechanism of the loosening. In an effort to identify the root cause of T/S loosening, three suspected causes were analyzed: (1) the impact force of flow on the T/S when the safety SI nozzle was in operation, (2) the differences between In-600 and In-690 in terms of physical and chemical properties (notably the thermal expansion coefficient), and (3) the positioning error after explosive expansion of the T/S as well as the asymmetric expansion of T/S. It was confirmed that none of the three suspected causes could be considered as the root cause. However, after reviewing design changes applied to the Palo Verde nuclear plant predating KSNP YG #3 & #4 to KSNP #5 & #6, it was realized that the second design modification (in terms of groove depth & material) had required an additional explosive energy by 150% in aggregate, but the amount of gunpowder and the explosive expansion method were the same as before, resulting in insufficient explosive force that led to poor thermal sleeve expansion. T/S measurement data and rubbing copies also support this conclusion. In addition, it is our judgment that the acceptance criteria applicable to T/S fitting was not strict enough, failing to single out thermal sleeves that were not expanded sufficiently. Furthermore, the T/S loosening was also attributable to lenient quality control before and after fitting the T/S that resulted in significant uncertainty. Lastly, in a flow-induced vibration test planned to account for the flow mechanism that had a direct impact upon the loosening of the thermal sleeves that were not fitted completely, it was discovered that the T/S loosening was attributable to RCS main flow. In addition, it was proven theoretically that the rotation of the T/S was induced by vibration.

scholarly journals Blowout Accident Impact Analysis Method for the Siting of Offshore Floating Nuclear Power Plant in Offshore Oil Fields

2019 ◽  
Vol 2019 ◽  
pp. 1-7
Author(s):  
Zhigang Lan
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Power Plants ◽  
Impact Analysis ◽  
Oil Spills ◽  
Oil Field ◽  
Oil Fields ◽  
Offshore Oil ◽  
The Impact

Focused on the utilization of nuclear energy in offshore oil fields, the correspondence between various hazards caused by blowout accidents (including associated, secondary, and derivative hazards) and the initiating events that may lead to accidents of offshore floating nuclear power plant (OFNPP) is established. The risk source, risk characteristics, risk evolution, and risk action mode of blowout accidents in offshore oil fields are summarized and analyzed. The impacts of blowout accident in offshore oil field on OFNPP are comprehensively analyzed, including injection combustion and spilled oil combustion induced by well blowout, drifting and explosion of deflagration vapor clouds formed by well blowouts, seawater pollution caused by blowout oil spills, the toxic gas cloud caused by well blowout, and the impact of mobile fire source formed by a burning oil spill on OFNPP at sea. The preliminary analysis methods and corresponding procedures are established for the impact of blowout accidents on offshore floating nuclear power plants in offshore oil fields, and a calculation example is given in order to further illustrate the methods.

Conceptual Design for an Industrial Prototype Graz Cycle Power Plant

2002 ◽  
Author(s):  
H. Jericha ◽  
E. Go¨ttlich
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
International Cooperation ◽  
Conceptual Design ◽  
Thermal Efficiency ◽  
Fuel Oil ◽  
Heavy Fuel Oil ◽  
Gasification Products ◽  
Prototype Design ◽  
Industrial Prototype

The gas turbine system GRAZ CYCLE has been thoroughly studied in terms of thermodynamics and turbomachinery layout. What is to be presented here is a prototype design for an industrial size plant, suited for NG-fuel and coal and heavy fuel oil gasification products, capable to retain the CO2 from combustion and at the same time able to achieve maximum thermal efficiency. The authors hope for an international cooperation to make such a plant available within a few years.

Sign in / Sign up

Export Citation Format

Share Document