scholarly journals IDENTIFICATION OF INDIVIDUAL TREES AND GROUPS OF TREES IN THE LANDSCAPE USING AIRBORNE LASER SCANNING DATA

2014 ◽  
Vol 40 (3) ◽  
pp. 110-115 ◽  
Author(s):  
Robert Smreček ◽  
Zuzana Michňova
Keyword(s):  
Standard Deviation ◽  
Point Cloud ◽  
Laser Scanning ◽  
Average Distance ◽  
Aerial Images ◽  
3D Point Cloud ◽  
Average Difference ◽  
Airborne Laser ◽  
Fully Automatic ◽  
Individual Trees

In the work, a fully automatic approach for vegetation delineation using ALS data is presented. Nowadays, in Slovakia, aerial images and satellite scenes are used for this purpose. For vegetation identification, the measurement of local transparency and roughness directly in 3D point cloud was used. The aim was the identification of groups of trees with area bigger than 0.1 ha and individual trees. On the experimental area, 33 polygons representing groups of trees and 120 individual trees were identified. For groups of trees the accuracy of identification was 100%. For comparison, an area with reference polygons, which were manually vectorised by the operator on the orthophotos with spatial resolution 30 cm, was used. The average difference in the area was –0.26%, with standard deviation ±8.17%. The distance of borders of reference polygons and polygons derived from ALS data was also compared, average distance for border parts that fall inside the reference polygons was 2.24 m with standard deviation of ±2.8 m. The average distance for borders parts that fall outside of the reference polygons was 1.84 m with standard deviation ±2.04 m. The accuracy of individual trees identification was 98%.

scholarly journals ANALYSIS OF 3D BUILDING MODELS ACCURACY BASED ON THE AIRBORNE LASER SCANNING POINT CLOUDS

2018 ◽  
Vol XLII-2 ◽  
pp. 797-804 ◽  
Author(s):  
W. Ostrowski ◽  
M. Pilarska ◽  
J. Charyton ◽  
K. Bakuła
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Large Scale ◽  
Point Clouds ◽  
3D Models ◽  
Airborne Laser Scanning ◽  
Aerial Images ◽  
Statistical Parameters ◽  
Airborne Laser ◽  
Building Models

Creating 3D building models in large scale is becoming more popular and finds many applications. Nowadays, a wide term “3D building models” can be applied to several types of products: well-known CityGML solid models (available on few Levels of Detail), which are mainly generated from Airborne Laser Scanning (ALS) data, as well as 3D mesh models that can be created from both nadir and oblique aerial images. City authorities and national mapping agencies are interested in obtaining the 3D building models. Apart from the completeness of the models, the accuracy aspect is also important. Final accuracy of a building model depends on various factors (accuracy of the source data, complexity of the roof shapes, etc.). In this paper the methodology of inspection of dataset containing 3D models is presented. The proposed approach check all building in dataset with comparison to ALS point clouds testing both: accuracy and level of details. Using analysis of statistical parameters for normal heights for reference point cloud and tested planes and segmentation of point cloud provides the tool that can indicate which building and which roof plane in do not fulfill requirement of model accuracy and detail correctness. Proposed method was tested on two datasets: solid and mesh model.

scholarly journals A FAST METHOD FOR MEASURING THE SIMILARITY BETWEEN 3D MODEL AND 3D POINT CLOUD

2016 ◽  
Vol XLI-B1 ◽  
pp. 725-728
Author(s):  
Zongliang Zhang ◽  
Jonathan Li ◽  
Xin Li ◽  
Yangbin Lin ◽  
Shanxin Zhang ◽  
...  
Keyword(s):  
Surface Area ◽  
Point Cloud ◽  
Laser Scanning ◽  
3D Model ◽  
Average Distance ◽  
Synthetic Data ◽  
Fast Method ◽  
3D Point Cloud ◽  
Partial Similarity ◽  
Distance Weighted

This paper proposes a fast method for measuring the partial Similarity between 3D Model and 3D point Cloud (SimMC). It is crucial to measure SimMC for many point cloud-related applications such as 3D object retrieval and inverse procedural modelling. In our proposed method, the surface area of model and the Distance from Model to point Cloud (DistMC) are exploited as measurements to calculate SimMC. Here, DistMC is defined as the weighted distance of the distances between points sampled from model and point cloud. Similarly, Distance from point Cloud to Model (DistCM) is defined as the average distance of the distances between points in point cloud and model. In order to reduce huge computational burdens brought by calculation of DistCM in some traditional methods, we define SimMC as the ratio of weighted surface area of model to DistMC. Compared to those traditional SimMC measuring methods that are only able to measure global similarity, our method is capable of measuring partial similarity by employing distance-weighted strategy. Moreover, our method is able to be faster than other partial similarity assessment methods. We demonstrate the superiority of our method both on synthetic data and laser scanning data.

scholarly journals ALS Point Cloud Classification by Integrating an Improved Fully Convolutional Network into Transfer Learning with Multi-Scale and Multi-View Deep Features

Sensors ◽  
2020 ◽  
Vol 20 (23) ◽  
pp. 6969
Author(s):  
Xiangda Lei ◽  
Hongtao Wang ◽  
Cheng Wang ◽  
Zongze Zhao ◽  
Jianqi Miao ◽  
...  
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
3D Point Cloud ◽  
Feature Maps ◽  
Convolutional Network ◽  
Fully Convolutional Network ◽  
Multi Scale ◽  
Airborne Laser ◽  
Cloud Classification ◽  
Point Cloud Classification

Airborne laser scanning (ALS) point cloud has been widely used in various fields, for it can acquire three-dimensional data with a high accuracy on a large scale. However, due to the fact that ALS data are discretely, irregularly distributed and contain noise, it is still a challenge to accurately identify various typical surface objects from 3D point cloud. In recent years, many researchers proved better results in classifying 3D point cloud by using different deep learning methods. However, most of these methods require a large number of training samples and cannot be widely used in complex scenarios. In this paper, we propose an ALS point cloud classification method to integrate an improved fully convolutional network into transfer learning with multi-scale and multi-view deep features. First, the shallow features of the airborne laser scanning point cloud such as height, intensity and change of curvature are extracted to generate feature maps by multi-scale voxel and multi-view projection. Second, these feature maps are fed into the pre-trained DenseNet201 model to derive deep features, which are used as input for a fully convolutional neural network with convolutional and pooling layers. By using this network, the local and global features are integrated to classify the ALS point cloud. Finally, a graph-cuts algorithm considering context information is used to refine the classification results. We tested our method on the semantic 3D labeling dataset of the International Society for Photogrammetry and Remote Sensing (ISPRS). Experimental results show that overall accuracy and the average F1 score obtained by the proposed method is 89.84% and 83.62%, respectively, when only 16,000 points of the original data are used for training.

scholarly journals A FAST METHOD FOR MEASURING THE SIMILARITY BETWEEN 3D MODEL AND 3D POINT CLOUD

2016 ◽  
Vol XLI-B1 ◽  
pp. 725-728 ◽  
Author(s):  
Zongliang Zhang ◽  
Jonathan Li ◽  
Xin Li ◽  
Yangbin Lin ◽  
Shanxin Zhang ◽  
...  
Keyword(s):  
Surface Area ◽  
Point Cloud ◽  
Laser Scanning ◽  
3D Model ◽  
Average Distance ◽  
Synthetic Data ◽  
Fast Method ◽  
3D Point Cloud ◽  
Partial Similarity ◽  
Distance Weighted

This paper proposes a fast method for measuring the partial Similarity between 3D Model and 3D point Cloud (SimMC). It is crucial to measure SimMC for many point cloud-related applications such as 3D object retrieval and inverse procedural modelling. In our proposed method, the surface area of model and the Distance from Model to point Cloud (DistMC) are exploited as measurements to calculate SimMC. Here, DistMC is defined as the weighted distance of the distances between points sampled from model and point cloud. Similarly, Distance from point Cloud to Model (DistCM) is defined as the average distance of the distances between points in point cloud and model. In order to reduce huge computational burdens brought by calculation of DistCM in some traditional methods, we define SimMC as the ratio of weighted surface area of model to DistMC. Compared to those traditional SimMC measuring methods that are only able to measure global similarity, our method is capable of measuring partial similarity by employing distance-weighted strategy. Moreover, our method is able to be faster than other partial similarity assessment methods. We demonstrate the superiority of our method both on synthetic data and laser scanning data.

scholarly journals Archaeological Surveying of Subarctic and Arctic Landscapes: Comparing the Performance of Airborne Laser Scanning and Remote Sensing Image Data

2021 ◽  
Vol 13 (4) ◽  
pp. 1917
Author(s):  
Alma Elizabeth Thuestad ◽  
Ole Risbøl ◽  
Jan Ingolf Kleppe ◽  
Stine Barlindhaug ◽  
Elin Rose Myrvoll
Keyword(s):  
Remote Sensing ◽  
Laser Scanning ◽  
Digital Terrain Model ◽  
Image Data ◽  
Remote Sensing Image ◽  
Airborne Laser Scanning ◽  
Aerial Images ◽  
Detection Rates ◽  
Airborne Laser ◽  
Pros And Cons

What can remote sensing contribute to archaeological surveying in subarctic and arctic landscapes? The pros and cons of remote sensing data vary as do areas of utilization and methodological approaches. We assessed the applicability of remote sensing for archaeological surveying of northern landscapes using airborne laser scanning (LiDAR) and satellite and aerial images to map archaeological features as a basis for (a) assessing the pros and cons of the different approaches and (b) assessing the potential detection rate of remote sensing. Interpretation of images and a LiDAR-based bare-earth digital terrain model (DTM) was based on visual analyses aided by processing and visualizing techniques. 368 features were identified in the aerial images, 437 in the satellite images and 1186 in the DTM. LiDAR yielded the better result, especially for hunting pits. Image data proved suitable for dwellings and settlement sites. Feature characteristics proved a key factor for detectability, both in LiDAR and image data. This study has shown that LiDAR and remote sensing image data are highly applicable for archaeological surveying in northern landscapes. It showed that a multi-sensor approach contributes to high detection rates. Our results have improved the inventory of archaeological sites in a non-destructive and minimally invasive manner.

scholarly journals Regional Modeling of Forest Fuels and Structural Attributes Using Airborne Laser Scanning Data in Oregon

2021 ◽  
Vol 13 (2) ◽  
pp. 261
Author(s):  
Francisco Mauro ◽  
Andrew T. Hudak ◽  
Patrick A. Fekety ◽  
Bryce Frank ◽  
Hailemariam Temesgen ◽  
...  
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Field Measurements ◽  
Point Clouds ◽  
Semiparametric Models ◽  
Airborne Laser Scanning ◽  
Parametric Models ◽  
Fuel Load ◽  
Forest Fuels ◽  
Airborne Laser

Airborne laser scanning (ALS) acquisitions provide piecemeal coverage across the western US, as collections are organized by local managers of individual project areas. In this study, we analyze different factors that can contribute to developing a regional strategy to use information from completed ALS data acquisitions and develop maps of multiple forest attributes in new ALS project areas in a rapid manner. This study is located in Oregon, USA, and analyzes six forest structural attributes for differences between: (1) synthetic (i.e., not-calibrated), and calibrated predictions, (2) parametric linear and semiparametric models, and (3) models developed with predictors computed for point clouds enclosed in the areas where field measurements were taken, i.e., “point-cloud predictors”, and models developed using predictors extracted from pre-rasterized layers, i.e., “rasterized predictors”. Forest structural attributes under consideration are aboveground biomass, downed woody biomass, canopy bulk density, canopy height, canopy base height, and canopy fuel load. Results from our study indicate that semiparametric models perform better than parametric models if no calibration is performed. However, the effect of the calibration is substantial in reducing the bias of parametric models but minimal for the semiparametric models and, once calibrations are performed, differences between parametric and semiparametric models become negligible for all responses. In addition, minimal differences between models using point-cloud predictors and models using rasterized predictors were found. We conclude that the approach that applies semiparametric models and rasterized predictors, which represents the easiest workflow and leads to the most rapid results, is justified with little loss in accuracy or precision even if no calibration is performed.

Modelling bird richness and bird species presence in a boreal forest reserve using airborne laser-scanning and aerial images

Bird Study ◽  
2014 ◽  
Vol 61 (2) ◽  
pp. 204-219 ◽  
Author(s):  
Katrine Eldegard ◽  
John Wirkola Dirksen ◽  
Hans Ole Ørka ◽  
Rune Halvorsen ◽  
Erik Næsset ◽  
...  
Keyword(s):  
Boreal Forest ◽  
Laser Scanning ◽  
Bird Species ◽  
Airborne Laser Scanning ◽  
Aerial Images ◽  
Forest Reserve ◽  
Airborne Laser ◽  
Bird Richness

scholarly journals MULTISPECTRAL AIRBORNE LASER SCANNING FOR AUTOMATED MAP UPDATING

2016 ◽  
Vol XLI-B3 ◽  
pp. 323-330 ◽  
Author(s):  
Leena Matikainen ◽  
Juha Hyyppä ◽  
Paula Litkey
Keyword(s):  
Change Detection ◽  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Aerial Images ◽  
Sensor Technology ◽  
Classification Error ◽  
Surface Model ◽  
Airborne Laser ◽  
Map Updating

During the last 20 years, airborne laser scanning (ALS), often combined with multispectral information from aerial images, has shown its high feasibility for automated mapping processes. Recently, the first multispectral airborne laser scanners have been launched, and multispectral information is for the first time directly available for 3D ALS point clouds. This article discusses the potential of this new single-sensor technology in map updating, especially in automated object detection and change detection. For our study, Optech Titan multispectral ALS data over a suburban area in Finland were acquired. Results from a random forests analysis suggest that the multispectral intensity information is useful for land cover classification, also when considering ground surface objects and classes, such as roads. An out-of-bag estimate for classification error was about 3% for separating classes asphalt, gravel, rocky areas and low vegetation from each other. For buildings and trees, it was under 1%. According to feature importance analyses, multispectral features based on several channels were more useful that those based on one channel. Automatic change detection utilizing the new multispectral ALS data, an old digital surface model (DSM) and old building vectors was also demonstrated. Overall, our first analyses suggest that the new data are very promising for further increasing the automation level in mapping. The multispectral ALS technology is independent of external illumination conditions, and intensity images produced from the data do not include shadows. These are significant advantages when the development of automated classification and change detection procedures is considered.

scholarly journals EXPLORING ALS AND DIM DATA FOR SEMANTIC SEGMENTATION USING CNNS

2018 ◽  
Vol XLII-1 ◽  
pp. 347-354 ◽  
Author(s):  
F. Politz ◽  
M. Sester
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Semantic Segmentation ◽  
Point Clouds ◽  
Good Alternative ◽  
Aerial Images ◽  
Learning Approaches ◽  
Advantages And Disadvantages ◽  
Sensing Applications ◽  
High Level

<p><strong>Abstract.</strong> Over the past years, the algorithms for dense image matching (DIM) to obtain point clouds from aerial images improved significantly. Consequently, DIM point clouds are now a good alternative to the established Airborne Laser Scanning (ALS) point clouds for remote sensing applications. In order to derive high-level applications such as digital terrain models or city models, each point within a point cloud must be assigned a class label. Usually, ALS and DIM are labelled with different classifiers due to their varying characteristics. In this work, we explore both point cloud types in a fully convolutional encoder-decoder network, which learns to classify ALS as well as DIM point clouds. As input, we project the point clouds onto a 2D image raster plane and calculate the minimal, average and maximal height values for each raster cell. The network then differentiates between the classes ground, non-ground, building and no data. We test our network in six training setups using only one point cloud type, both point clouds as well as several transfer-learning approaches. We quantitatively and qualitatively compare all results and discuss the advantages and disadvantages of all setups. The best network achieves an overall accuracy of 96<span class="thinspace"></span>% in an ALS and 83<span class="thinspace"></span>% in a DIM test set.</p>

Sign in / Sign up

Export Citation Format

Share Document