scholarly journals DEVELOPMENT AND TESTING OF GLOW-IN-THE-DARK CONCRETE BASED RAISED PAVEMENT MARKER FOR IMPROVED TRAFFIC SAFETY

2021 ◽  
Vol 27 (5) ◽  
pp. 278-287
Author(s):  
Muhammad Saleem ◽  
Akira Hosoda

Road infrastructure has witnessed incremental changes in the past as compared to the immense development witnessed by the vehicle’s safety technology. Bott’s dots and other reflector devices are extensively used on the road infrastructure for lane separation and for improving edge detection. These devices come in a large variety of shapes and sizes, however, all of them fall under the category of retroreflectivity since they depend on vehicle lights to provide reflection. Glow-in-the-dark (GiD) material has the benefit that it can store energy during the presence of light and can emit the stored energy in the form of visible light in the absence of an external light source. In this regard, the presented research work details the development and testing of GiD concrete based markers that can be used for lane separation and edge detection. The benefit of the presented innovation is that GiD concrete based markers can be used for visible light instead of retroreflectivity in addition to acting as a driver alertness tool. The durability performance of the presented innovative GiD based raised pavement markers has been presented along with cost comparison to traditional Bott’s dot. In addition, the presented prototype can be adopted for various architectural and esthetical applications in buildings, parks, walkways and bicycle lanes etc.

2019 ◽  
Vol 65 (2) ◽  
pp. 49-53
Author(s):  
Miladin Nešić ◽  
Dušan Mladenović ◽  
Mirjana Ilić ◽  
Ivana Andrijanić ◽  
Mirko Koković ◽  
...  

The European Directive on the Road Infrastructure Safety Improvement (2008/96/EC) has established the implementation of appropriate procedures as the basic tools for improving the road infrastructure on the trans-European road network. The Law on Roads (2018) prescribes the implementation of the following procedures: Road safety impact assessment; Road safety audit; Road safety inspection; Risk mapping; Black spot identification; and In depth road accident studies. The Law on Roads also prescribes that the Minister will prescribe the manner of implementation and the contents of the Evaluation, Audit and Independent Assessment reports, as well as the manner of determining the major risk portions and the identification and ranking of hazardous sites (black spots). Since the method of implementation and the content of the report are not yet prescribed, the authors contributed in this paper to defining the manner of implementation and content of the traffic safety report on the example of the section of the highway, as the highest category of state road. In the framework of the training of auditors and auditors, among others, a pilot project was carried out for the safety of traffic on the part of the E-75 (A1) highway, about 2,7 km ahead of the Mali Požarevac loop, including the loop. The verified part of the highway also includes a ramp with a toll ramp, service facility, overpass, bridge, etc., so the selected checked part is representative for defining a recommendation for the mode of implementation and the model for the preparation of the report.


2016 ◽  
Vol 138 (02) ◽  
pp. 42-47
Author(s):  
Henry Petroski

This article discusses various road infrastructure history and perspectives that could help in improving future infrastructure. The visibility of pavement markings has continued to be problematic, especially where winter and snow are virtually synonymous. The American reinvention of the highway centreline has been described as ‘the most important single traffic safety device in the history of auto transportation.’ The solid white line that marks the right-hand edge is thus considered another significant innovation. The white line delineating the pavement’s right-hand edge was explicitly advocated in the 1961 manual, and the 1978 edition made it required for all multilane rural highways. Such standardization, while it may take time to be codified, certainly does make our highways safer and less stressful to navigate.


Author(s):  
Tomislav Petrović ◽  
Miloš Milosavljević ◽  
Milan Božović ◽  
Danislav Drašković ◽  
Milija Radović

The application of intelligent transport systems (hereinafter ITSs) on roads enables continuous monitoring of road users during a whole year with the aim to collect good-quality data based on which the more complex analyses could be done, such as monitoring of certain traffic safety indicators. Automatic traffic counters are one of the most commonly implemented ITSs for collecting traffic flow parameters that are relevant for traffic management on state roads in Republic of Serbia. This paper presents one of the possible ways to collect, analyze and present data on road users’ speeds using automatic traffic counters, where certain traffic safety indicators are analyzed in terms of road users’ compliance with the speed limit on the road section from Mali Pozarevac to Kragujevac. Based on the analyses of data downloaded from automatic traffic counters, it is observed that an extremely high percentage of vehicles drive at speed higher than the speed limit, indicating clearly to higher traffic accident risk, as well as to the need for a tendency to implement speed management on roads using ITS in the forthcoming period.


2021 ◽  
Vol 67 (4) ◽  
pp. 1-8
Author(s):  
Jacob Adedayo Adedeji ◽  
Xoliswa Feikie

Road traffic fatality is rated as one of the ten causes of death in the world and with various preventive measures on a global level, this prediction is only placed on flat terrain and didn’t reduce. Nevertheless, road users’ communication is an essential key to traffic safety. This communication, be it formal or informal between the road users is an important factor for smooth traffic flow and safety. Communication language on roads can be categorized into; formal device-based signal (formal signal), formal hand signal (formal signal), informal device-based signal (informal signal), and informal gesture-based signal (everyday signal). However, if the intent of the message conveys is not properly understood by the other road user, mistakes and errors may set in. Overall, the formal signal is based on explicit learning which occurs during the driving training and the license testing process and the informal, implicit learning occur during the actual driving process on the road unintentionally. Furthermore, since the informal signal is not a prerequisite to driving or taught in driving schools, novice drivers are clueless and thus, might have contributed to errors and mistakes which leads to traffic fatalities. Therefore, this study seeks to document the informal means of communication between drivers on South African roads. Consequently, a qualitative semi-structured interview questionnaire would be used in the collection of informal signals, which were predominantly used on South African roads from driving instructors and thereafter, a focus group of passengers’ car, commercial and truck drivers will be used to validate the availability and their understanding of these informal signals using a Likert-type scale for the confidence level. In conclusion, the information gathered from this study will help improve road safety and understanding of road users especially drivers on the necessity of communication and possible adaptation for other developing countries.


2018 ◽  
Vol 1 (3) ◽  
pp. 667-678
Author(s):  
Mulyadi Mulyadi ◽  
Muhammad Isya ◽  
Sofyan M. Saleh

Abstract: Blangkejeren - Lawe Aunan road conditions overall is on the slopes of the mountains which is strongly influenced by local environmental factors such as drainage, topography, soil conditions, material conditions and vehicle load conditions across the road. It should be noted in order to avoid a decrease in the road quality due to road surface damage that can affect the traffic safety, comfort and smoothness.. Therefore, it is necessary to study the evaluation of the condition of the damaged road surface and the local factors that affect the damage in order to avoid a decrease in the roads quality. This study took place on Blangkejeren - Lawe Aunan roads started from Sta. 529 + 700 - Sta. 535 + 206. Generally, the condition of roads in this segment were found damage that disturb the comfort, smoothness and safety of the roads users. In this study, the primary data obtained by actual surveys in the form of data field length, width, area, and depth of each type of damage as well as local factors that lead to such damage. Actual field surveys conducted along the 5.506 km, with the distance interval of each segment is 100 m. The secondary data obtained from the relevant institutions and other materials related to this research. This study analyzed the PCI method (Pavement Condition Index) to obtain the level of damage in order to know how to handle, while for the identification of the damage done by observation factors descriptively appropriate observation in the field such as the number of damage points. The results of this study found that the type of damage caused to roads is damage to the cover layer, a hole, and curly. This type of damage that commonly occurs on the road Blangkejeren - Lawe Aunan is damage to the edges with a percentage of 87.30%. The local factors that greatly affect drainage on the percentage of damage is 62.00%. PCI average value is 13.47 which indicates a very bad condition (very poor) and requires maintenance or improvement of reconstruction.Abstrak: Kondisi jalan Blangkejeren – Lawe Aunan secara keseluruhan berada di lereng pegunungan sangat dipengaruhi oleh faktor lingkungan setempat seperti drainase, topografi, kondisi tanah, kondisi material dan kondisi beban kendaraan yang melintasi jalan tersebut. Hal ini perlu diperhatikan agar tidak terjadi penurunan kualitas jalan akibat kerusakan permukaan jalan sehingga dapat mempengaruhi keamanan, kenyamanan, dan kelancaran dalam berlalu lintas. Oleh karena itu, perlu dilakukan penelitian evaluasi terhadap kondisi permukaan jalan yang mengalami kerusakan serta faktor setempat yang mempengaruhi kerusakan tersebut agar tidak terjadi penurunan kualitas jalan. Penelitian ini mengambil lokasi di ruas jalan Blangkejeren – Lawe Aunan yang dimulai dari Sta. 529+700 - Sta. 535+206. Umumnya kondisi ruas jalan pada segmen ini banyak ditemukan kerusakan-kerusakan yang dapat mengganggu kenyamanan, kelancaran, dan keamanan pengguna jalan. Dalam penelitian ini data primer diperoleh dengan melakukan survei aktual lapangan yaitu berupa data panjang, lebar, luasan, dan kedalaman tiap jenis kerusakan serta faktor setempat yang mengakibatkan kerusakan tersebut. Survei aktual lapangan dilakukan sepanjang 5,506 km, dengan jarak interval setiap segmen adalah 100 m. Adapun data sekunder diperoleh dari lembaga terkait dan bahan lainnya yang berhubungan dengan penelitian ini. Penelitian ini dianalisis dengan metode PCI (Pavement Condition Index) untuk mendapatkan tingkat kerusakan agar diketahui cara penanganannya, sedangkan untuk identifikasi faktor kerusakannya dilakukan dengan pengamatan secara diskriptif sesuai hasil pengamatan di lapangan berupa jumlah titik kerusakan. Hasil penelitian ini didapatkan bahwa jenis kerusakan yang terjadi pada ruas jalan adalah kerusakan lapisan penutup, lubang, dan keriting. Jenis kerusakan yang umum terjadi pada ruas jalan Blangkejeren – Lawe Aunan adalah kerusakan tepi dengan persentase 87,30 %. Faktor setempat yang sangat mempengaruhi kerusakan adalah drainase dengan persentase 62,00%. Nilai PCI rata-rata yaitu 13,47 yang menunjukkan kondisi sangat buruk (very poor) dan memerlukan pemeliharaan peningkatan atau rekonstruksi.


2021 ◽  
pp. 38-40
Author(s):  
А.Р. Исмагилова

В статье раскрываются полномочия сотрудников подразделений пропаганды Государственной инспекции безопасности дорожного движения в целях профилактики дорожно-транспортных происшествий и травматизма на дороге. The article reveals the powers of the employees of the propaganda units of the State Traffic Safety Inspectorate in order to prevent road accidents and injuries on the road.


Author(s):  
Zhenyao Zhang ◽  
Jianying Zheng ◽  
Hao Xu ◽  
Xiang Wang

The problem of traffic safety has become increasingly prominent owing to the increase in the number of cars. Traffic accidents often occur in an instant, which makes it necessary to obtain traffic data with high resolution. High-resolution micro traffic data (HRMTD) indicates that the spatial resolution reaches the centimeter level and that the temporal resolution reaches the millisecond level. The position, direction, speed, and acceleration of objects on the road can be extracted with HRMTD. In this paper, a LiDAR sensor was installed at the roadside for data collection. An adjacent-frame fusion method for vehicle detection and tracking in complex traffic circumstances is presented. Compared with the previous research, objects can be detected and tracked without object model extraction or a bounding box description. In addition, problems caused by occlusion can be improved using adjacent frames fusion in the vehicle detection and tracking algorithms in this paper. The data processing procedure are as follows: selection of area of interest, ground point removal, vehicle clustering, and vehicle tracking. The algorithm has been tested at different sites (in Reno and Suzhou), and the results demonstrate that the algorithm can perform well in both simple and complex application scenarios.


Electronics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 341 ◽  
Author(s):  
Miha Ambrož ◽  
Uroš Hudomalj ◽  
Alexander Marinšek ◽  
Roman Kamnik

Measuring friction between the tyres of a vehicle and the road, often and on as many locations on the road network as possible, can be a valuable tool for ensuring traffic safety. Rather than by using specialised equipment for sequential measurements, this can be achieved by using several low-cost measuring devices on vehicles that travel on the road network as part of their daily assignments. The presented work proves the hypothesis that a low cost measuring device can be built and can provide measurement results comparable to those obtained from expensive specialised measuring devices. As a proof of concept, two copies of a prototype device, based on the Raspberry Pi single-board computer, have been developed, built and tested. They use accelerometers to measure vehicle braking deceleration and include a global positioning receiver for obtaining the geolocation of each test. They run custom-developed data acquisition software on the Linux operating system and provide automatic measurement data transfer to a server. The operation is controlled by an intuitive user interface consisting of two illuminated physical pushbuttons. The results show that for braking tests and friction coefficient measurements the developed prototypes compare favourably to a widely used professional vehicle performance computer.


2012 ◽  
Vol 18 (Suppl 1) ◽  
pp. A192.3-A192
Author(s):  
C Jennissen ◽  
C Buresh ◽  
K Harland ◽  
D Ellis ◽  
G Denning

Sign in / Sign up

Export Citation Format

Share Document