scholarly journals Development of Wireless Control System for Smart Street Lighting using ESP8266

2020 ◽  
Vol 14 (15) ◽  
pp. 68
Author(s):  
Syifaul Fuada ◽  
Trio Adiono ◽  
Lindawani Siregar
Keyword(s):  
Control System ◽  
Pulse Width Modulation ◽  
Low Cost ◽  
Environmental Condition ◽  
Lighting System ◽  
Street Lighting ◽  
Lighting Control ◽  
Turn On ◽  
Wireless Control ◽  
Temperature And Humidity

In this paper, we report a smart street lighting control system using the ESP8266 which is a low-cost Wi-Fi chip with full TCP/IP stack and microcontroller capability. Our system is equipped with a web server developed in HTML code. Hence, our smart street lighting system can be controlled wirelessly to turn ON or turn OFF, and it can be monitored its environmental condition (i.e., temperature and humidity around the system). All sensors used in this system are pure digitally-outputted sensor: DHT11 to monitor the ambient temperature and humidity and BH1750 to adjust the street light intensity automatically. The dimming technique was applied in the control system by using Pulse Width Modulation (PWM). The system was divided into two main parts: Gateway and Node in which these two parts employ the ESP8266. The Gateway as a coordinator will send a message to the node as an end device (in this work, the streetlight act as a Node). Later, the node will send the ACK to the Gateway. As results, each node can send a message to other nodes.

scholarly journals Enhancement of Wireless Lighting Control System

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Joseph C. Attachie ◽  
George Owusu ◽  
Shiphrah O. Adu
Keyword(s):  
Control System ◽  
Power Supply ◽  
Current Sensor ◽  
Lighting System ◽  
Wireless Technology ◽  
Lighting Control ◽  
Wireless Control ◽  
The World ◽  
Industrial Settings

The rapid increase in wireless technology has enormously increased wireless control of lighting system in residential, commercial, and industrial settings of many countries across the world. However, this system lacks troubleshooting interface, making it very difficult for the identification of faults in the lighting system. This paper therefore seeks to improve on the wireless lighting system by incorporating into the system two types of sensors such as the current sensor and light dependent resistance (LDR). The current sensor is functioned to determine fault in power supply, whilst the LDR determines fault due to damage in the AC lamp. The proposed system was first simulated with Proteus software to observe the set objectives. A successful simulation resulted in the implementation of the system. The results discussed prove that incorporating wireless technology with current sensor and LDR will make troubleshooting easy and effective when the need arises.

Distributed Street Lighting Control System with IntelliSense

2012 ◽  
Vol 241-244 ◽  
pp. 1869-1874
Author(s):  
Feng Li ◽  
Fan Yang
Keyword(s):  
Control System ◽  
Detection Method ◽  
Field Application ◽  
Complex Configuration ◽  
Detection Methods ◽  
Lighting System ◽  
Street Lighting ◽  
Lighting Control ◽  
Extension Mechanism

In this paper, we proposed a novel street lighting system called Distributed Street Lighting Control System with IntelliSense (DSLCSI), and on this basis, five-end architecture, an ItelliSense extension mechanism and a cable theft detection method are described in turn. DSLCSI is presented to overcome the complex configuration, poor scalability and low reliability of cable theft detection methods in existing street lighting system. The results of field application show that DSLCSI provides convenient system scalability and maintainability, and improves the reliability of cable theft detection.

scholarly journals A low-cost web-based smart street lighting geographical information system for smaller towns and villages

2020 ◽  
Vol 10 (1) ◽  
pp. 450-458
Author(s):  
Filip Pružinec ◽  
Peter Mego ◽  
Renata Đuračiová
Keyword(s):  
Information System ◽  
Geographical Information System ◽  
Web Application ◽  
Low Cost ◽  
Geographical Information ◽  
Light Control ◽  
Street Lighting ◽  
Lighting Control ◽  
Manual Adjustment ◽  
Control Service

AbstractThe use of LED lights in smart street lighting to save energy is efficient and very common in many developed cities. However, such a system results in higher initial costs, which may discourage smaller towns and villages from its purchasing. This paper therefore deals with the design and development of a smart street lighting control system for smaller cities and villages. Such a system is required to be economical from the perspective of development and production. Considering other requirements such as platform independence, high availability and broad support, we proposed to build a system as a web application using a custom light control service component. The result is a web application that consists of a user interface served by a web server and an application server used to communicate with light control service. In addition, the system is designed as a geographical information system to be easy to use for managing street lights in groups or individually, while displaying them on the map. The system allows automatic sensor-based light intensity modulation by default with the possibility of manual adjustment or override of the illumination. It also includes a device error notification system with a tool to navigate faulty devices. The presented system is a low-cost solution for intelligent street lighting control designed for smaller cities or villages. They can apply the designed architecture of the system and the specific technologies suitable because of their low-cost implementation.

Research and Design of Intelligent Lighting Control System Based on Industrial Wireless Technology

2011 ◽  
Vol 467-469 ◽  
pp. 620-624 ◽  
Author(s):  
Jun Wang ◽  
Wei Ru Chen
Keyword(s):  
Control System ◽  
The Internet ◽  
Control Technology ◽  
Wireless Technology ◽  
Lighting Control ◽  
Turn On ◽  
Point Control ◽  
The Cost ◽  
Research And Design ◽  
The Internet Of Things

The intelligent lighting control system is one of typical applications of the Internet of things. The method of intelligent lighting control system based on industrial wireless technology is proposed in the paper. It used proposed three-point-control technology, and adjusting the brightness of lamps, turn on/off the lamps and a part of fault detection can be realized. At the same time, it can greatly reduce the cost of system. It will be useful to engineer and researchers.

scholarly journals Energy saving control system development for external lighting

2020 ◽  
Vol 17 (3) ◽  
pp. 1601
Author(s):  
A.A. Ashryatov ◽  
V.G. Kulikov ◽  
A.V. Panteleyev
Keyword(s):  
Control System ◽  
Energy Saving ◽  
Control Systems ◽  
Reactive Power ◽  
System Development ◽  
Economic Effect ◽  
Power Reduction ◽  
Street Lighting ◽  
Lighting Control ◽  
Energy Saving Control

<p>Currently, energy saving requires the development of simple and efficient street lighting control systems. In order to create such a control system, it is necessary to develop an original principle of its operation. They considered the advantages of electronic starting devices in street lighting control systems. They performed the analysis of the existing state of street lighting means, their shortcomings and solutions have been determined, and they developed the method of lighting device automatic control. They performed the assessment of the economic effect from loss reduction associated with reactive power and due to power reduction during deep night. They presented the example of economic effect achievement from the use of an electronic starting device with automatic power reduction.</p>

Design of Airfield Lighting Monitor and Control System Based on Hybrid Network

2011 ◽  
Vol 467-469 ◽  
pp. 331-334
Author(s):  
Chang You Wang ◽  
Xiao Feng Yao
Keyword(s):  
Control System ◽  
Light Level ◽  
Configuration Software ◽  
Hybrid Network ◽  
Lighting System ◽  
Visual Aids ◽  
Lighting Control ◽  
Overall Design ◽  
Low Visibility ◽  
And Control

Airfield lighting system is necessary visual aids to ensure the normal movements of aircraft at night or under low visibility conditions. A hybrid network monitoring system based on CAN bus and Ethernet was introduced in the paper according to the actuality of national airfield lighting control system. The AC chop voltage regulating technology was adopted to adjust light level in the Dimmer what is the core of the system, configuration software, hybrid network technology were used to realize the remote monitoring, overall design scheme, the choice of hardware and software platform, and the realization method of network communication were gave out in the paper. Experimental results show that system performance is superior, and be worth promoting.

Application of Electrical Lighting Energy-saving Design in Intelligent Lighting Control System

节能环保 ◽  
2019 ◽  
Vol 4 (1) ◽  
pp. 12-13
Author(s):  
Hualian Zheng ◽  
Keyword(s):  
Control System ◽  
Energy Saving ◽  
Modern Society ◽  
Lighting System ◽  
Lighting Control ◽  
Lighting Energy

Intelligent lighting control system is the symbol of green lighting in modern society, and it is also one of the indispensable core technologies in modern lighting. Adding many control switches to the lighting circuit to control the whole lighting system, or controlling the dimming function of the lamp through the control gauge technology is the traditional lighting mode.

The Design of LED Intelligent Lighting Control System Based on CAN Bus

2013 ◽  
Vol 753-755 ◽  
pp. 2637-2640
Author(s):  
Bang Cheng Zhang ◽  
Hua Zhen Wang ◽  
Yan Qing Jiang ◽  
Yan Juan Hu
Keyword(s):  
Control System ◽  
Can Bus ◽  
Light Emitting Diode ◽  
Railway Vehicle ◽  
Lighting System ◽  
Light Emitting ◽  
Led Light ◽  
Lighting Control ◽  
Vibration Resistance ◽  
Very High

In order to meet the requirements of high stability, high vibration resistance, energy saving and environmental protection and long service life for the railway vehicle car lighting system, this paper designed a LED (Light Emitting Diode) lighting control system suitable for railway vehicles car. Using IPC for the principal computer, microcontroller for the subordinate computer, CAN bus as the communication network. Multiple brightness sensor collect the brightness information of car environment. According to the characteristics that the LED is suitable for high frequency switch power, using PWM technology, the current though the LED light can be control. ATmega16 microcontroller as the control core can automatically to adjust the brightness of the car according to the change of external environment, it ensured that the LED light emitting uniform and stable so that this kind of control system has very high application value.

The Dividing Area Control of Lighting System

2013 ◽  
Vol 330 ◽  
pp. 587-591
Author(s):  
Qing Wei ◽  
Hong Yan Ma
Keyword(s):  
Control System ◽  
Energy Saving ◽  
Lighting Design ◽  
Lighting System ◽  
Artificial Lighting ◽  
Lighting Control ◽  
Energy Issues

The lighting system is an integral part of the whole building. Lighting control system is an important part of the lighting system and lighting design. As increasingly severe of the energy issues, energy saving has become one of the problems to be solved in the lighting control system. This paper takes a normally used office as an example. Control the blinds and the lamps in the office reasonably. On the premise of the full use of daylight, make the office achieve the most comfortable illumination by using artificial lighting supplies.

Sign in / Sign up

Export Citation Format

Share Document