Wood-Based Composites

2014 ◽  
pp. 1-45 ◽  
Author(s):  
Marius C. Barbu ◽  
Roman Reh ◽  
Mark Irle
Keyword(s):  
High Performance ◽  
Hybrid Composites ◽  
Plastic Foams ◽  
Laminated Veneer Lumber ◽  
Wood Floor ◽  
Element Size ◽  
Higher Dimensional ◽  
Panel Products ◽  
Resin Binder ◽  
New Generation

Wood composites are made from various wood or ligno-cellulosic non-wood materials (shape and origin) that are bonded together using either natural bonding or synthetic resin (e.g. thermoplastic or duroplastic polymers), or organic- (e.g. plastics)/inorganic-binder (e.g. cement). This product mix ranges from panel products (e.g., plywood, particleboard, strandboard, or fiberboard) to engineered timber substitutes (e.g., laminated veneer lumber or structural composite lumber). These composites are used for a number of structural and nonstructural applications in product lines ranging from interior to exterior applications (e.g. furniture and architectural trim in buildings). Wood composite materials can be engineered to meet a range of specific properties. When wood materials and processing variables are properly selected, the result can provide high performance and reliable service. Laminated composites consist of wood veneers bonded with a resin-binder and fabricated with either parallel- (e.g. Laminated Veneer Lumber with higher performance properties parallel to grain) or cross-banded veneers (e.g. plywood, homogenous and with higher dimensional stability). Particle-, strand-, or fiberboard composites are normally classified by density (high, medium, low) and element size. Each is made with a dry woody element, except for fiberboard, which can be made by either dry or wet processes. Hybrid composites based on wood wool, particles, and floor mixed with cement or gypsum are used in construction proving high weathering and fire resistance in construction. The mixture with plastics (PP or PE) and wood floor open a new generation of injected or molded Wood Plastic Composites (WPC), which are able to substitute plastics for some utilizations. In addition, sandwich panels with light core made from plastic foams or honeycomb papers are used in the furniture industry.

Wood-Based Composites

2017 ◽  
pp. 1038-1074
Author(s):  
Marius C. Barbu ◽  
Roman Reh ◽  
Mark Irle
Keyword(s):  
High Performance ◽  
Hybrid Composites ◽  
Plastic Foams ◽  
Laminated Veneer Lumber ◽  
Wood Floor ◽  
Element Size ◽  
Higher Dimensional ◽  
Panel Products ◽  
Resin Binder ◽  
New Generation

Wood composites are made from various wood or ligno-cellulosic non-wood materials (shape and origin) that are bonded together using either natural bonding or synthetic resin (e.g. thermoplastic or duroplastic polymers), or organic- (e.g. plastics)/inorganic-binder (e.g. cement). This product mix ranges from panel products (e.g., plywood, particleboard, strandboard, or fiberboard) to engineered timber substitutes (e.g., laminated veneer lumber or structural composite lumber). These composites are used for a number of structural and nonstructural applications in product lines ranging from interior to exterior applications (e.g. furniture and architectural trim in buildings). Wood composite materials can be engineered to meet a range of specific properties. When wood materials and processing variables are properly selected, the result can provide high performance and reliable service. Laminated composites consist of wood veneers bonded with a resin-binder and fabricated with either parallel- (e.g. Laminated Veneer Lumber with higher performance properties parallel to grain) or cross-banded veneers (e.g. plywood, homogenous and with higher dimensional stability). Particle-, strand-, or fiberboard composites are normally classified by density (high, medium, low) and element size. Each is made with a dry woody element, except for fiberboard, which can be made by either dry or wet processes. Hybrid composites based on wood wool, particles, and floor mixed with cement or gypsum are used in construction proving high weathering and fire resistance in construction. The mixture with plastics (PP or PE) and wood floor open a new generation of injected or molded Wood Plastic Composites (WPC), which are able to substitute plastics for some utilizations. In addition, sandwich panels with light core made from plastic foams or honeycomb papers are used in the furniture industry.

Graphene/chitosan/Ag+- doped hydroxyapatite triple composite fiber coatings on new generation hybrid titanium composite by electrospinning

2021 ◽  
pp. 002199832110075
Author(s):  
Tuğba Mutuk ◽  
Mevlüt Gürbüz
Keyword(s):  
Hybrid Composites ◽  
Graphene Nanosheets ◽  
Pure Titanium ◽  
Composite Fiber ◽  
Mass Change ◽  
Coated Materials ◽  
Nano Fiber ◽  
Hybrid Nanofiber ◽  
New Generation ◽  
Fiber Coatings

In this work, The hybrid hydroxyapatite (HaP), chitosan (CH) and graphene nanosheets (GNS) mixtures were applied by electrospinning on the surface of GNS and Si3N4 (SN) binary powder reinforced hybrid titanium (Ti) metal composites surface to improve composite biosurface functionallity. The surfaces of coated materials were characterized and antibacterial tests were carried on for their suitability in the industry by performing artificial body fluid tests. The hybrid nano fiber coatings formed a homogeneous structure on the composite. According to bioactivity tests and microstructure analysis, it was seen that HaP, which has the best results in the change of pH (pH= 11.80) values. The lowest mass change (0.0005 g) was observed on the 10th day of pure titanium. The highest mass change (0.0210 g) was obtained as on the HaP coated hybrid titanium composite. According to the antibacterial test result the hybrid nanofiber containing silver (Ag+) doped HaP on Ti composites showed the best antibacterial property aganist the E.coli. The fabricated electrospin coated hybrid composites can be a potantial candidate for dental, orthopedic implant applications and tissue engineering.

scholarly journals Review of Functional Treatments for Modified Wood

Coatings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 327
Author(s):  
Morwenna J. Spear ◽  
Simon F. Curling ◽  
Athanasios Dimitriou ◽  
Graham A. Ormondroyd
Keyword(s):  
High Performance ◽  
Responsive Materials ◽  
Wood Modification ◽  
Wide Range ◽  
Natural Wood ◽  
Impregnation Modification ◽  
New Applications ◽  
New Generation ◽  
Dimensional Instability ◽  
Modified Wood

Wood modification is now widely recognized as offering enhanced properties of wood and overcoming issues such as dimensional instability and biodegradability which affect natural wood. Typical wood modification systems use chemical modification, impregnation modification or thermal modification, and these vary in the properties achieved. As control and understanding of the wood modification systems has progressed, further opportunities have arisen to add extra functionalities to the modified wood. These include UV stabilisation, fire retardancy, or enhanced suitability for paints and coatings. Thus, wood may become a multi-functional material through a series of modifications, treatments or reactions, to create a high-performance material with previously impossible properties. In this paper we review systems that combine the well-established wood modification procedures with secondary techniques or modifications to deliver emerging technologies with multi-functionality. The new applications targeted using this additional functionality are diverse and range from increased electrical conductivity, creation of sensors or responsive materials, improvement of wellbeing in the built environment, and enhanced fire and flame protection. We identified two parallel and connected themes: (1) the functionalisation of modified timber and (2) the modification of timber to provide (multi)-functionality. A wide range of nanotechnology concepts have been harnessed by this new generation of wood modifications and wood treatments. As this field is rapidly expanding, we also include within the review trends from current research in order to gauge the state of the art, and likely direction of travel of the industry.

scholarly journals A study on the numerical modelling of UHPFRC-strengthened members

2018 ◽  
Vol 199 ◽  
pp. 09001
Author(s):  
Renaud Franssen ◽  
Serhan Guner ◽  
Luc Courard ◽  
Boyan Mihaylov
Keyword(s):  
Numerical Modelling ◽  
High Performance ◽  
Concrete Structures ◽  
Concrete Members ◽  
High Durability ◽  
Tension Tests ◽  
The World ◽  
Aging Infrastructure ◽  
New Generation ◽  
Modelling Approach

The maintenance of large aging infrastructure across the world creates serious technical, environmental, and economic challenges. Ultra-high performance fibre-reinforced concretes (UHPFRC) are a new generation of materials with outstanding mechanical properties as well as very high durability due to their extremely low permeability. These properties open new horizons for the sustainable rehabilitation of aging concrete structures. Since UHPFRC is a young and evolving material, codes are still either lacking or incomplete, with recent design provisions proposed in France, Switzerland, Japan, and Australia. However, engineers and public agencies around the world need resources to study, model, and rehabilitate structures using UHPFRC. As an effort to contribute to the efficient use of this promising material, this paper presents a new numerical modelling approach for UHPFRC-strengthened concrete members. The approach is based on the Diverse Embedment Model within the global framework of the Disturbed Stress Field Model, a smeared rotating-crack formulation for 2D modelling of reinforced concrete structures. This study presents an adapted version of the DEM in order to capture the behaviour of UHPFRC by using a small number of input parameters. The model is validated with tension tests from the literature and is then used to model UHPFRC-strengthened elements. The paper will discuss the formulation of the model and will provide validation studies with various tests of beams, columns and walls from the literature. These studies will demonstrate the effectiveness of the proposed modelling approach.

Recent Advances in the Study of Film Cooling on the Gas Turbine Blade

2014 ◽  
Vol 971-973 ◽  
pp. 143-147 ◽  
Author(s):  
Ping Dai ◽  
Shuang Xiu Li
Keyword(s):  
Gas Turbine ◽  
Turbine Blade ◽  
Film Cooling ◽  
Gas Turbines ◽  
High Performance ◽  
Leading Edge ◽  
Development Trend ◽  
Research Progress ◽  
Gas Turbine Blade ◽  
New Generation

The development of a new generation of high performance gas turbine engines requires gas turbines to be operated at very high inlet temperatures, which are much higher than the allowable metal temperatures. Consequently, this necessitates the need for advanced cooling techniques. Among the numerous cooling technologies, the film cooling technology has superior advantages and relatively favorable application prospect. The recent research progress of film cooling techniques for gas turbine blade is reviewed and basic principle of film cooling is also illustrated. Progress on rotor blade and stationary blade of film cooling are introduced. Film cooling development of leading-edge was also generalized. Effect of various factor on cooling effectiveness and effect of the shape of the injection holes on plate film cooling are discussed. In addition, with respect to progress of discharge coefficient is presented. In the last, the future development trend and future investigation direction of film cooling are prospected.

The Amount of Hydrophobic Resin Binder in the Micro Diffusion Layer for DMFC

2004 ◽  
Vol 1 (1) ◽  
pp. 66-68
Author(s):  
Minehisa Imazato ◽  
Hayato Hommura ◽  
Go Sudo ◽  
Kenji Katori ◽  
Koichi Tanaka
Keyword(s):  
Diffusion Layer ◽  
High Performance ◽  
Critical Parameter ◽  
Catalyst Layer ◽  
Carbon Paper ◽  
Resin Binder ◽  
Performance Area ◽  
Stable Mixture

The micro-diffusion layer for DMFC consists of carbon and hydrophobic resin used as a binder. The function of the micro diffusion layer on carbon paper is not only to support the catalyst layer to conduct electricity, but also to maintain a stable mixture of gas and liquid. The amount of hydrophobic resin binder in the micro diffusion layer is therefore a critical parameter. The amount of hydrophobic resin binder is normally less than 50wt%, but we investigated this parameter and found that there is another high performance area around 80wt%.

Sign in / Sign up

Export Citation Format

Share Document