An Analysis of the Impact of Business Networks on Technology Development

2019 ◽  
pp. 20-44
Author(s):  
Maryam Ebrahimi
Keyword(s):  
New Product Development ◽  
New Technologies ◽  
Technology Development ◽  
New Technology ◽  
Business Networks ◽  
Agent Based ◽  
Technology Products ◽  
Business Networking ◽  
New Entrants ◽  
The Impact

This chapter proposes an agent-based model (ABM) of business networking at the level of an industry involving two technology products and populated with technology-based firms. Since technology-based companies trade technologies as products, the concept of new technology development (NTD) is generalized to the new product development. In ABM, each agent represents a small and medium-sized enterprise (SME) which might develop one technology based on some features including perceived value of the technology, perceived ability of NTD, and business network. By defining agents as being the current companies along with the new entrants, one can analyze the effect of the policy of “improving the entry of new companies into the industry” with and without business networking. The results of ABM demonstrated that business networking enhances the number of SMEs with the ability to develop new technologies, especially in a case where the number of new entrants is high.

scholarly journals Efektywność produkcji FAME na podstawie wymagań normy ISO 14045:2012

Nafta-Gaz ◽  
2021 ◽  
Vol 77 (3) ◽  
pp. 208-214
Author(s):  
Michał Pajda ◽  
◽  
Wojciech Mazela ◽  
Keyword(s):  
Natural Environment ◽  
New Technologies ◽  
Negative Impact ◽  
New Technology ◽  
Methyl Esters ◽  
Production Costs ◽  
Raw Material ◽  
Energy Materials ◽  
The Impact ◽  
Selection Of

The aim of the work was to present the issue of eco-efficiency, based on the PN-EN ISO 14045:2012 standard in relation to the production of fatty acid methyl esters (FAME). The ecoefficiency analysis takes into account economic and environmental aspects in the improvement of products and processes / technologies. Eco-efficiency considers the product and technology throughout the life cycle, from the construction phase, through use to decommissioning. The impact on the natural environment is assessed on the basis of: consumption of energy, materials, dust and gas emissions, waste and sewage. Total costs include: production costs, raw material costs, costs during the use phase including maintenance, repair and operating costs, product disposal or recycling. The eco-efficiency analysis is helpful in making decisions regarding the selection of a new product or designing a new technology, and enables the selection of the variant that is the most economical and has the least possible impact on the natural environment. These issues are particularly important in the case of biofuels. The rapid growth of their production and the European Union’s policy, which aims to increase the share of energy from renewable sources, cause concerns of many experts regarding the threats related to the production of biofuels, both for the environment and food security. In particular, efforts are made to minimize the amount of waste and residues by implementing the idea of a circular economy. This approach promotes the development of new technologies that are more environmentally friendly. Due to the regulations set out in the RED and RED II Directives, there is a chance that the biofuels will have a less negative impact on the environment. This results from the obligation to certify compliance with the sustainability criteria, which is carried out by voluntary systems recognized by the European Commission, such as the KZR INiG System.

Collaborations in the Open Innovation Era

2010 ◽  
pp. 61-86 ◽  
Author(s):  
Annamária Inzelt
Keyword(s):  
Open Innovation ◽  
New Technologies ◽  
New Technology ◽  
Secondary Data ◽  
Transition Process ◽  
Data Bank ◽  
Global Scale ◽  
Foreign Companies ◽  
Global Innovation ◽  
Technology Products

Although the impact of open innovation on a global scale on the collaboration between universities and foreign industry is clearly important, empirical evidence from the field is lacking. This chapter investigates the collaboration between Hungarian universities and foreign companies in research and development. The chapter attempts to provide a relevant picture of the research-related linkages of Hungarian universities and foreign companies by employing secondary data processed from various data-banks. The analysis suggests that foreign direct investment and foreign companies play major roles in the internationalisation of research during this second decade of the transition process. Assessing the research and technology products which have originated in university-industry collaboration is no easy task. According to experimental measurements and pilot data-bank, there were more joint publications involving foreign than domestic companies, and the citation value per publication was significantly higher with the former. Data-bank also show that developments in new technology in terms of patent figures rarely involved university-owned or co-owned inventions, although there is some evidence there are more patents which are university-related than owned. Domestic invention and the foreign ownership of patents represent one more sign of Hungarian involvement in global innovation in the development of new technologies.

Improving order processes with information technology: McDonald’s case

2020 ◽  
Vol 10 (2) ◽  
pp. 102-107
Author(s):  
Bahadir K Akcam
Keyword(s):  
Information Technology ◽  
Fast Food ◽  
Business Processes ◽  
New Technologies ◽  
New Technology ◽  
Order Process ◽  
Fast Food Industry ◽  
Technology Experience ◽  
Technology Initiatives ◽  
The Impact

This case is designed to explore the impact of information technology on business processes. The case starts with a description of a customer’s new technology experience at a McDonald’s restaurant. McDonald’s introduced multiple technologies in recent years as part of its strategic growth plan. The fast-food company is improving its business processes, mainly the order process, with new technologies to provide customer convenience. Such changes are critical to staying successful in the highly competitive fast-food industry. Self-order kiosks, the mobile order and pay app, and the Uber Eats app are three major technologies which have changed the order processes at McDonald’s. Students explore how these technologies change the order process and describe the impact of these technology initiatives at McDonald’s.

scholarly journals The application of science and technology development in shaping current and future aquaculture production systems

2010 ◽  
Vol 149 (S1) ◽  
pp. 133-141 ◽  
Author(s):  
J. BOSTOCK
Keyword(s):  
New Technologies ◽  
Materials Science ◽  
Technology Development ◽  
Production Systems ◽  
Research Capacity ◽  
Financial Accounting ◽  
Business Structures ◽  
Food Needs ◽  
The Impact ◽  
Substantial Change

SUMMARYAquaculture development over the past 50 years has been facilitated largely by the application of science and the introduction of new technologies. Although aquaculture is a very diverse sector in products, production systems and business structures, almost every activity has benefited from scientific advances. However, the impact of technological progress is most clearly seen where there has also been substantial industrial consolidation. This has provided greater capital resources for investment and a more attractive market for suppliers of innovations to target. It has also encouraged consolidation of research capacity and stronger articulation between private and publicly funded research efforts. Further development along current trajectories is possible through advances in genomics, information technology, materials science and other areas. However, there may also be substantial disruptions if, for instance, energy becomes much more expensive, or large mono-cultures are impacted by climate change. Substantial change could also be driven by policies that aim at bringing realistic external costs of environmental services into company accounts. Research into more resilient aquaculture systems that comply more with ecological than financial accounting principles is under way, but will require substantial development to meet the challenges of rising food needs and social aspirations.

Gas Turbine Electric Start System (GT-ESS) Ship Integration

2008 ◽  
Author(s):  
Martin Quin˜ones ◽  
Saurabh Deshmukh
Keyword(s):  
Gas Turbine ◽  
New Technologies ◽  
New Technology ◽  
Water System ◽  
Balanced Design ◽  
Test And Evaluation ◽  
Extensive Test ◽  
Machinery Space ◽  
Cooling Loop ◽  
The Impact

The U.S. Navy has incorporated a realm of new technologies into ship warfare in the last few years. This availability has led to advances in ship machinery systems that have enabled the Navy to improve and sustain its mission capabilities. Since 2003, the Navy has worked with manufacturers to develop, test and evaluate a gas turbine electric starter system (GT-ESS) capable of meeting all starting requirements of the General Electric LM2500 marine gas turbine. This engine is used on U.S. Navy Surface Combatants for vessel propulsion. The GT-ESS has also been used to start a newly acquired naval engine from Rolls Royce, the MT30. The GT-ESS has endured extensive test and evaluation at the Land Based Engineering Site (LBES) of the Naval Surface Warfare Center, Carderock Division in Philadelphia, PA. Throughout this time the system has been redesigned as well to comply with more restrictive shipboard requirements. This effort had a direct impact on the packaging of the system. Additional effort has been directed to machinery integration. Full integration of the GT-ESS onto the LM2500 engine entails sharing a common lubrication and cooling loop. This is a challenge for the engine since its lubrication is critical for its service life. It poses a challenge for the GT-ESS since its design must guarantee that the lubrication system will remain free of contamination. The GT-ESS also poses integration challenges for a ship installation. The ideal location of the GT-ESS in the ship is adjacent to the propulsion engine within the machinery room space. Switchboards that provide power to the system are located several decks above the machinery space. Additionally, dedicated power supplies are required to handle the power requirements of the GT-ESS. Thus this power demand calls for an assessment of the power loads onboard ship. This new technology also has an impact on other ship systems. The GT-ESS driver is water cooled and designed to feed from the chill water system of the ship. Its electric motor lubrication has ties with another naval technology (digital fuel control). In turn these two are tied to the lube oil system and conditioning assembly (LOSCA) of the engine. Thus issues of oil pressure, temperature, backpressure, suction, and starvation are addressed and assessed. This paper explores the impact of ship machinery design for ship installation and its impact on other machinery systems as well as ship’s power. It targets proper hardware packaging as a means to achieve a well balanced design for ship application.

scholarly journals Innovative entrepreneurship and economic growth in emerging markets

Ekonomika ◽  
2021 ◽  
Vol 67 (4) ◽  
pp. 65-74
Author(s):  
Maja Ivanović-Đukić ◽  
Tamara Rađenović ◽  
Miljana Talić
Keyword(s):  
Economic Growth ◽  
Emerging Markets ◽  
Technology Development ◽  
New Technology ◽  
New Products ◽  
High Growth ◽  
Average Growth ◽  
Different Types ◽  
Impact Of Technology ◽  
The Impact

The paper analyses the contribution of different types of innovative entrepreneurship: new products entrepreneurship, new technology development entrepreneurship, high growth expectation entrepreneurship and average growth expectation entrepreneurship to economic growth in emerging markets. The aim of paper is to identify types of innovative entrepreneurship which have the greatest contribution to economic growth in emerging markets and propose measures that macroeconomic policy makers could implement to achieve sustainable economic growth. The regression analysis is performed in order to estimate the impact of different types of innovative entrepreneurship on economic growth in 13 emerging markets. The results have shown that a high growth expectation entrepreneurship has the greatest influence on economic growth. Also, results have shown that impact of new products entrepreneurship is bigger than impact of technology development entrepreneurship on economic growth in emerging markets.

ANALISIS FAKTOR KEPERCAYAAN TERHADAP TEKNOLOGI PADA KEINGINAN MASYARAKAT DALAM MENGADOPSI E-VOTING

2018 ◽  
Vol 4 (2) ◽  
Author(s):  
Anik Hanifatul Azizah
Keyword(s):  
New Technologies ◽  
New Technology ◽  
Positive Influence ◽  
Successful Implementation ◽  
Intention To Use ◽  
Actual System ◽  
Wide Range ◽  
Voting System ◽  
The Government ◽  
The Impact

[Id]Berkembangnya penggunaan mesin e-voting dan meningkatnya penerapan pemilu dalam jaringan (daring) mengindikasikan bahwa masyarakat percaya akan performansi teknologi informasi dalam meningkatkan proses pemilu. Kesuksesan implementasi teknologi informasi mutlak dibutuhkan, Sebagai dukungan kesuksesan tersebut diperlukan analisis yang mendalam. Sebelum mengimplementasikan teknologi e-voting, pemerintah perlu mengetahui tingkat kesediaan (willingness) masyarakat untuk menggunakan teknologi baru. Tingkatan tertentu bahwa ekspektasi seseorang dapat terpenuhi dengan baik adalah definisi dari kepercayaan (trust). Kepercayaan masyarakat teridentifikasi sebagai faktor utama untuk mempengaruhi niat/ kemauan masyarakat menggunakan sebuah teknologi. Penelitian ini menganalisis pengaruh dari faktor kepercayaan terhadap niat untuk menggunakan e-voting. Penelitian ini mengusulkan sebuah model yang menggambarkan niat masyarakat untuk menggunakan e-voting (Intention to use) dengan mengidentifikasi kepercayaan masyarakat terhadap teknologi (trust of technology). Trust dibagi menjadi beberapa faktor yang lebih spesifik. Kuisioner kertas disebarkan kepada 370 masyarakat negara Indonesia dan 346 di antaranya valid. Kuisioner disebarkan secara langsung oleh surveyor kepada masyarakat yang telah memiliki hak pilih dan disebar secara merata kepada golongan umur yang bervariasi, serta tingkat Pendidikan maupun profesi yang beragam. Hasil penelitian menunjukkan bahwa semakin tinggi Trust of Technology (TOT) dapat meningkatkan niat masyarakat untuk menggunakan e-voting (Intention to Use E-voting - ITU). Ditemukan juga beberapa faktor dapat mempengaruhi pengaruh positif terhadap kepercayaan masyarakat terhadap teknologi. Hasil dari penelitian ini menunjukkan bahwa pemerintah diharapkan untuk memperhatikan fakto-faktor yang mempengaruhi kepercayaan masyarakat yang berujung niat dan kemauan masyarakat untuk menggunakan e-voting sebelum menerapkan e-voting tersebut.Kata Kunci: Kepercayaan, Keinginan, Keamanan, Validitas, Pemilu.[En]Increasing adoption of the electronic voting machine and rising pilot testing of internet voting suggests people believe that ICT can improve the electoral process. Since every new technology adoption needs to achieve successful implementation, deeper analysis on several sides was needed to support it. Before implementing a particular e-voting technology, the government needs to know the level of citizen willingness to adopt those new technologies. The expectancy that promise of an individual or group can be relied upon is defined as trust. The citizen trust can be identified by certain factors that lead to intention to use actual system. This study analyzes the impact of trustworthiness on citizen intention to use e-voting system in a developing country. The research proposes a model of e-voting adoption intention by investigating citizen trustworthiness from trust of technology (TOT). The trust was expanded to more specific unique factors. Offline questionnaires were spreaded to 370 respondents and 346 of them were valid. Questionnaires were distributed directly by surveyors to people who have the right to vote and distributed equally for a wide range of ages, as well as varying levels of education and professions. The results indicate that higher TOT increase citizen intention to use e-voting, and also several key determinants have positive influence on the citizen trust. This result suggested that government should first comply with several factors in citizen trustworthiness before conducting an e-voting system.

The Psychological Impact of New Technologies: Anticipation of Stress

1989 ◽  
Vol 33 (13) ◽  
pp. 811-815
Author(s):  
Charles M. Slem ◽  
Daniel J. Levi ◽  
Andrew Young
Keyword(s):  
Technological Change ◽  
New Technologies ◽  
Job Insecurity ◽  
New Technology ◽  
Psychological Impact ◽  
Role Overload ◽  
Reduction In Force ◽  
Organizational Benefits ◽  
The Impact ◽  
The Relationship

Slem, Levi and Young (1986) developed a model of the psychological impact of technological change on the workforce. The purpose of current research was to investigate the relationship between stress and technological change. The “Impact of Technological Change Survey” was administered to workers in five large electronics manufacturing corporations. Almost one-third of the workforce believed that technological change would make the individual's job more stressful. Over 20% were worried about the future of their jobs. Anticipated role conflict, role ambiguity, and quantitative role overload produced the strongest and most consistent relationships with the global measure of stress. Qualitative role overload and beliefs about reduction in force were more closely allied to job insecurity stress. Anticipated stress is reduced somewhat when technological change is seen as providing personal and organizational benefits or when the organization is perceived as effectively dealing with the transition to the new technology.

scholarly journals Start-upy telemedyczne w Polsce — trendy i kierunki rozwoju

Ekonomia ◽  
2020 ◽  
Vol 26 (4) ◽  
pp. 37-45
Author(s):  
Anna Cuda
Keyword(s):  
Information And Communication Technologies ◽  
New Technologies ◽  
Technology Development ◽  
Data Transfer ◽  
New Technology ◽  
Quality Of Healthcare ◽  
Medical Services ◽  
Patient Treatment ◽  
Efficiency And Effectiveness ◽  
Information And Communication

The Polish medical market reports a growing demand for innovative solutions in the field of health protection — the use of information and communication technologies in the provision of medical services contributes to an increase in their efficiency and effectiveness. Telemedicine is data transfer and the provision of medical services to patients remotely, using new technology solutions. The main purpose of this paper is to analyze the current situation of the telemedicine market in Poland, especially new technology startups devoted to telemedicine solutions, and to identify investment trends. Technology development should be a process of targeted changes aimed at improving a certain process, bearing in mind the auxiliary and, above all, the increasingly crucial nature of new technologies in the process of patient treatment by specialists in the field of medicine. This study has been conducted in order to ascertain the attitudes of investors with capital of more than 50,000 euro, to the changing technological environment, which is intended to improve the provision of medical services and contribute to an increase in the quality of healthcare, and their willingness to invest in startups in the telemedicine industry.

Sign in / Sign up

Export Citation Format

Share Document