scholarly journals Efektywność produkcji FAME na podstawie wymagań normy ISO 14045:2012

Nafta-Gaz ◽  
2021 ◽  
Vol 77 (3) ◽  
pp. 208-214
Author(s):  
Michał Pajda ◽  
◽  
Wojciech Mazela ◽  
Keyword(s):  
Natural Environment ◽  
New Technologies ◽  
Negative Impact ◽  
New Technology ◽  
Methyl Esters ◽  
Production Costs ◽  
Raw Material ◽  
Energy Materials ◽  
The Impact ◽  
Selection Of

The aim of the work was to present the issue of eco-efficiency, based on the PN-EN ISO 14045:2012 standard in relation to the production of fatty acid methyl esters (FAME). The ecoefficiency analysis takes into account economic and environmental aspects in the improvement of products and processes / technologies. Eco-efficiency considers the product and technology throughout the life cycle, from the construction phase, through use to decommissioning. The impact on the natural environment is assessed on the basis of: consumption of energy, materials, dust and gas emissions, waste and sewage. Total costs include: production costs, raw material costs, costs during the use phase including maintenance, repair and operating costs, product disposal or recycling. The eco-efficiency analysis is helpful in making decisions regarding the selection of a new product or designing a new technology, and enables the selection of the variant that is the most economical and has the least possible impact on the natural environment. These issues are particularly important in the case of biofuels. The rapid growth of their production and the European Union’s policy, which aims to increase the share of energy from renewable sources, cause concerns of many experts regarding the threats related to the production of biofuels, both for the environment and food security. In particular, efforts are made to minimize the amount of waste and residues by implementing the idea of a circular economy. This approach promotes the development of new technologies that are more environmentally friendly. Due to the regulations set out in the RED and RED II Directives, there is a chance that the biofuels will have a less negative impact on the environment. This results from the obligation to certify compliance with the sustainability criteria, which is carried out by voluntary systems recognized by the European Commission, such as the KZR INiG System.

Reduction of Radioactive Waste Production: Where Is the Optimum?

2001 ◽  
Author(s):  
P. Havard
Keyword(s):  
Waste Management ◽  
New Technologies ◽  
Waste Treatment ◽  
Negative Impact ◽  
Production Costs ◽  
Waste Production ◽  
Medium Level ◽  
History Of ◽  
Intermediate Storage ◽  
The Impact

Abstract Low and medium level waste management means reducing the amount of waste generated during maintenance and operation of the plant, in accordance with the ALARA concept, while keeping not only the quality of the product but also the associated costs under control. All this waste is managed by ONDRAF/NIRAS, the Belgian Federal Agency responsible for waste management, including conditioning, intermediate storage and final disposal. Unfortunately, the actions taken by ONDRAF/NIRAS and the producers in order to reduce waste production have had a negative impact on waste treatment tariffs. It has become necessary to re-examine the relationship between ONDRAF/NIRAS and the producers, in order to control the costs of waste management. This problem concerns not only the treatment costs but also the disposal costs. The volume of waste has fallen from 30M3/Thwh in 1985 to 4.m3/Twh in 2000, not by chance but as the result of a new site organisation geared towards achieving this aim. This paper presents firstly the history of Belgian waste management, taking into account the impact on the associated costs, and secondly the measures that have to be taken in order to be able to decide which new technologies are necessary to go further with the objective of waste volume reduction in a new environment, namely deregulation and consequently high pressure on production costs. Finally, it presents a few conclusions.

scholarly journals The Impact of Environmental Regulation on the Location of Pollution-Intensive Industries in China under Agglomeration Effect

2021 ◽  
Vol 18 (8) ◽  
pp. 4045
Author(s):  
Yinhao Wu ◽  
Shumin Yu ◽  
Xiangdong Duan
Keyword(s):  
Environmental Regulation ◽  
Local Economic Development ◽  
Negative Impact ◽  
Empirical Test ◽  
Mediating Effect ◽  
Production Costs ◽  
Agglomeration Effect ◽  
The Government ◽  
Pollutant Discharge ◽  
The Impact

Pollution-intensive industries (PIIs) have both scale effect and environmental sensitivity. Therefore, this paper studies how environmental regulation (ER) affects the location dynamics of PIIs under the agglomeration effect. Our results show that, ER can increase the production costs of pollution-intensive firms (PIFs) by internalizing the negative impact of pollutant discharge in a region, and thus, directly reduces the region’s attractiveness to PIFs. Meanwhile, ER can indirectly reduce the attractiveness of a region to PIFs by reducing the externality of the regional agglomeration effect. Moreover, these influences are regulated by the level of local economic development. Based on the moderated mediating effect model, we find evidence from the site selection activities of newly built chemical firms in cities across China. The empirical test shows that compared with 2014, the proportion of the direct effect of ER to the total effects significantly decreased in 2018, while the proportion of indirect effects under the agglomeration effect increased significantly. Our findings provide reference for the government to design effective environmental policies to guide the location choice of new PIFs.

scholarly journals The Impact of COVID-19 on Surgical Training: the Past, the Present and the Future

2021 ◽  
Author(s):  
Marina Yiasemidou
Keyword(s):  
Infection Control ◽  
Surgical Training ◽  
New Technologies ◽  
Negative Impact ◽  
Elective Surgery ◽  
Control Measures ◽  
Negative Consequences ◽  
Surgical Services ◽  
The World ◽  
The Impact

AbstractThe COVID-19 pandemic and infection control measures had an unavoidable impact on surgical services. During the first wave of the pandemic, elective surgery, endoscopy, and ‘face-to-face’ clinics were discontinued after recommendations from professional bodies. In addition, training courses, examinations, conferences, and training rotations were postponed or cancelled. Inadvertently, infection control and prevention measures, both within and outside hospitals, have caused a significant negative impact on training. At the same time, they have given space to new technologies, like telemedicine and platforms for webinars, to blossom. While the recovery phase is well underway in some parts of the world, most surgical services are not operating at full capacity. Unfortunately, some countries are still battling a second or third wave of the pandemic with severely negative consequences on surgical services. Several studies have looked into the impact of COVID-19 on surgical training. Here, an objective overview of studies from different parts of the world is presented. Also, evidence-based solutions are suggested for future surgical training interventions.

scholarly journals Flight Simulator’s Energy Consumption Depending on the Conditions of the Air Operation

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 580
Author(s):  
Michał Gołębiewski ◽  
Marta Galant-Gołębiewska ◽  
Remigiusz Jasiński
Keyword(s):  
Energy Consumption ◽  
Natural Environment ◽  
Negative Impact ◽  
Weather Conditions ◽  
Civil Aviation ◽  
Flight Simulator ◽  
Motion Platform ◽  
Simulator Motion ◽  
The Individual ◽  
The Impact

Protection of the natural environment is a key activity driving development in the transport discipline today. The use of simulators to train civil aviation pilots provides an excellent opportunity to maintain the balance between efficiency and limit the negative impact of transport on the environment. Therefore, we decided to determine the impact of selected simulations of air operations on energy consumption. The aim of the research was to determine the energy consumption of the flight simulator depending on the type of flight operation and configuration used. We also decided to compare the obtained result with the energy consumption of an aircraft of a similar class, performing a similar aviation operation and other means of transport. In order to obtain the results, a research plan was proposed consisting of 12 scenarios differing in the simulated aircraft model, weather conditions and the use of the simulator motion platform. In each of the scenarios, energy consumption was measured, taking into account the individual components of the simulator. The research showed that the use of a flight simulator has a much smaller negative impact on the natural environment than flying in a traditional plane. Use of a motion platform indicated a change in energy consumption of approximately 40% (in general, flight simulator configuration can change energy consumption by up to 50%). The deterioration of weather conditions during the simulation caused an increase in energy consumption of 14% when motion was disabled and 18% when motion was enabled. Energy consumption in the initial stages of pilot training can be reduced by 97% by using flight simulators compared to aircraft training.

scholarly journals Assessment of the impact of emigration on the origin economy

2019 ◽  
Vol 20 ◽  
pp. 187-195 ◽  
Author(s):  
Rita Remeikienė ◽  
Ligita Gasparėnienė
Keyword(s):  
Vocational Training ◽  
Negative Impact ◽  
Positive Impact ◽  
Labour Force ◽  
Theoretical Research ◽  
Health Improvement ◽  
Monetary Transfers ◽  
The Unemployed ◽  
The Impact ◽  
Selection Of

Our article concentrates to the main aim – to assess the impact of emigration on an origin economy. This topic was chosen because the theoretical research has disclosed that the positive impact of emigration usually manifests through monetary transfers to a native country while the negative impact mainly emerges as a reduction in the labour force, which, in its turn, causes deterioration of a country’s demographic and economic situation. It has been found that the growing flows of emigration significantly reduce Lithuanian population and cause “brain drain”. High emigration rates also have a negative impact on Lithuanian national economy, in particular, its unemployment rate (the opposite effect). To reduce the rates of emigration from the country, Lithuania must develop and improve such ALPM’s elements as combination of work and dual vocational training, targeted selection of the industries for arrangement of an apprenticeship, manual training, dual vocational training and workplace training, segmentation of the unemployed by the indications of employment impediment, individual work with the unemployed to restore their basic skills (motivation, practice, health improvement), vocational guidance of young people (students) and early involvement of students into the labour market by combining studies and work.

Spousal Attitude Towards Exerting Conflict Resolution Strategies in Decision Making

Paradigm ◽  
2017 ◽  
Vol 21 (1) ◽  
pp. 75-90
Author(s):  
Shivendra Singh ◽  
Atul Dhyani
Keyword(s):  
Decision Making ◽  
Negative Impact ◽  
Marital Power ◽  
Consumption Decisions ◽  
Northern India ◽  
The Family ◽  
Conflict Resolution Strategies ◽  
Decision Satisfaction ◽  
The Impact ◽  
Selection Of

Family is one entity that has complex variables underplaying the consumption decisions, and marketers must understand how couples behave in concert to resolve conflict across major decisions. In this study, the family aspects are investigated to shed more light on spouse attitude towards family decision-making for selection of car and school/college for their ward and assess the impact of attitudinal factor on decision satisfaction. The drop-off/pick-up method was used to collect the data from Northern India. The result reveals that spousal attitude is formed by marital power, assertiveness, subtle manipulation, love, bargaining and being submissive. Results of multiple regression analysis show that subtle manipulation is most and marital power has a negative impact on spouses’ decision satisfaction. Thus, when targeting a family for a significant trades assay, the salesperson should focus on both husband and wife and stimulate a conversation between them to appeal to their conjoint kinship.

Development of new technologies for sorting of fibrous cotton stalks by the combined method “ADAU” and production of sowing material

2021 ◽  
Vol 70 (09) ◽  
pp. 7-13
Author(s):  
Şahlar Mahmud oğlu Babayev ◽  
◽  
Camaləddin Ələkbər oğlu Məmmədov ◽  
Səfiyyə İbrahim qızı Məhərrəmova ◽  
◽  
...  
Keyword(s):  
Agricultural Sector ◽  
New Technologies ◽  
Raw Materials ◽  
New Technology ◽  
Absorption Capacity ◽  
Cotton Stalks ◽  
Cotton Yarns ◽  
The Republic ◽  
Selection Of

The article is devoted to the development of technologies for the production of quality sowing material, which is the main problem of cotton growing, which has a greater share in the agricultural sector, which is the basis of the economy of the republic. For this purpose, a new technology for the production of sowing material was developed as a result of the selection of biologically mature yarns during the combined sorting of fibrous cotton yarns, as well as processing of these yarns by the proposed method, and two positive decisions were made by the Intellectual Property Agency. In addition to the mentioned advantages of the proposed technology, the use of low-percentage starch solution, as well as absorbents with high absorption capacity (zeolite or bentonite) in the country to improve the quality of sowing material in the production of sowing material as a result of processing raw materials. indicates that it has indicators. Key words: fiber, cotton, yarn, combined, sorting, sowing material, production, technology

scholarly journals Second Life and Academia – Reframing the Debate between Supporters and Critics

2012 ◽  
Vol 5 (1) ◽  
Author(s):  
David Kurt Herold
Keyword(s):  
Higher Education ◽  
Hong Kong ◽  
Second Life ◽  
New Technologies ◽  
Negative Impact ◽  
Virtual Campus ◽  
The Many ◽  
The Impact

The introduction of new ICTs in education is usually discussed in terms of the many benefits new technologies offer, or of the negative impact they might have on the lives of their users. Focusing on the introduction of the 3D online world "Second Life" into higher education, this article shows how such discourses lead to an impasse between the advocates and the critics of new ICTs in education. To break the impasse, and to understand the impact of Second Life, or other ICTs, on education, requires a far more differentiated approach than the discourses around Second Life have shown so far. Based on the experiences of the author in creating a virtual campus for the Hong Kong Polytechnic University in Second Life, the article advocates a shift in focus from the discussion of powerful ICTs and their impact on largely passive users, to the study of active individuals, and the ways in which they integrate new ICTs into their pre-existing social and technological practices.

scholarly journals Mighty Mites

2005 ◽  
Vol 127 (09) ◽  
pp. 34-37
Author(s):  
Don W. Dareing ◽  
Thomas Thundat
Keyword(s):  
Health Care ◽  
Industrial Revolution ◽  
New Technologies ◽  
New Technology ◽  
Production Costs ◽  
New Materials ◽  
Performance Predictions ◽  
The 19Th Century ◽  
Analytical Tools ◽  
Reliability And Availability

This article reviews that the future belongs to machines built at molecular scales—if the tools to engineer them. Just as the steam engine sparked the industrial revolution of the 19th century, nanotechnology will likely ignite a new industrial revolution during the 21st century. Nanotechnology has the potential to impact all industries; the health care and computer industries are already capitalizing on it. New materials are being created that will affect everything from aerospace and energy to recreation and entertainment. Science is uncovering new technology almost daily, which will have a great impact on many aspects of society. These technologies are at various stages of development, but in the end, each spin-off product must withstand the test in the marketplace. The evaluation of each product will still be based on the same set of metrics as other products: performance, cost, risk or reliability, and availability. To satisfy these metrics, engineers will need analytical tools to make performance predictions, establish production costs and lifecycle economics, quantify the risk associated with new technologies, and satisfy a dynamic market.

scholarly journals The Durability of Concrete Modified by Waste Limestone Powder in the Chemically Aggressive Environment

Materials ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1693 ◽  
Author(s):  
Maja Kępniak ◽  
Piotr Woyciechowski ◽  
Paweł Łukowski ◽  
Justyna Kuziak ◽  
Rafał Kobyłka
Keyword(s):  
Negative Impact ◽  
Raw Materials ◽  
Desirability Function ◽  
Chloride Ion ◽  
Production Costs ◽  
Limestone Powder ◽  
Fine Aggregate ◽  
Concrete Technology ◽  
The Impact ◽  
Durability Of Concrete

The idea of sustainable development assumes that natural resources must be treated as limited goods and that waste must be managed rationally. This idea and the constant striving to reduce production costs make the use of waste materials as substitutes for traditionally used raw materials from non-renewable sources increasingly popular. In cement concrete technology, there are many possibilities to use waste as components of mortars and concretes. The subject of this paper is a fine-grained material, obtained as a by-product during the preparation of aggregate for mineral-asphalt mixtures. The aim of the research was to test the suitability of the selected type of powder, namely limestone powder, as a component of cement composites. The paper presents an evaluation of the potential of using the limestone powder as a substitute for the fine aggregate, focusing on the impact of such a modification on aspects of durability. The sulfate degradation and chloride ion diffusion in concrete were investigated. The overall desirability function has been determined. It was demonstrated that the satisfactory value of the general desirability can be attributed to most of the investigated concretes. Positive test results support the potential of replacing part of natural fine aggregate with the tested waste limestone dust without a negative impact on the durability of concrete.

Sign in / Sign up

Export Citation Format

Share Document