An Energy Storage System

2020 ◽  
pp. 337-356
Author(s):  
Juan Aurelio Montero-Sousa ◽  
Tomás González-Ayuso ◽  
Xosé Manuel Vilar Martínez ◽  
Luis Alfonso Fernandez-Serantes ◽  
Esteban Jove ◽  
...  
Keyword(s):  
Energy Storage ◽  
Energy Demand ◽  
Storage Systems ◽  
Storage System ◽  
Energy Storage System ◽  
The Third ◽  
General Terms ◽  
Two Factors ◽  
Technical Factors ◽  
Intelligent Model

The increasing greenhouse emissions have led us to take advantage of renewable sources. The intermittency of these sources can be mitigated using energy storage systems. The present work shows three different strategies depending on the power management and other technical factors, such as energy quality, each one with a specific goal. The first strategy tries to improve the electricity quality, the second tries to reduce the penalties imposed by the grid manager to the power plant, and the third one tries to improve significantly the final economic profit of the generation companies. To achieve the above strategies, an intelligent model approach is explained with the aim to predict the energy demand and generation. These two factors play a key role in all cases. In order to validate the three proposed strategies, the data from a real storage/generation system consisting on an electrolyzer, a hydrogen tank, and a fuel cell were analyzed. In general terms, the three methods were checked, obtaining satisfactory results with an acceptable performance of the created system.

Modeling an Energy Storage System Based on a Hybrid Renewable Energy System in Stand-alone Applications

2017 ◽  
Vol 68 (11) ◽  
pp. 2641-2645
Author(s):  
Alexandru Ciocan ◽  
Ovidiu Mihai Balan ◽  
Mihaela Ramona Buga ◽  
Tudor Prisecaru ◽  
Mohand Tazerout
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Compressed Air ◽  
Energy Sources ◽  
Energy Storage Systems ◽  
Hybrid Renewable Energy System

The current paper presents an energy storage system that stores the excessive energy, provided by a hybrid system of renewable energy sources, in the form of compressed air and thermal heat. Using energy storage systems together with renewable energy sources represents a major challenge that could ensure the transition to a viable economic future and a decarbonized economy. Thermodynamic calculations are conducted to investigate the performance of such systems by using Matlab simulation tools. The results indicate the values of primary and global efficiencies for various operating scenarios for the energy storage systems which use compressed air as medium storage, and shows that these could be very effective systems, proving the possibility to supply to the final user three types of energy: electricity, heat and cold function of his needs.

A facile new modified method for the preparation of a new cerium-doped lanthanium cuperate perovskite energy storage system using nanotechnology

2021 ◽  
Author(s):  
Mervette El Batouti ◽  
H. A. Fetouh
Keyword(s):  
Solar Cells ◽  
Energy Storage ◽  
Dielectric Loss ◽  
Storage Systems ◽  
Low Cost ◽  
Storage System ◽  
Energy Storage System ◽  
Solar Ponds ◽  
Modified Method ◽  
Ferroelectric Perovskite

New ferroelectric perovskite sample: excellent dielectric, negligible dielectric loss for energy storage systems such as solar cells, solar ponds, and thermal collectors has been prepared at low cost using nanotechnology.

scholarly journals Thermodynamic Analysis of a Hybrid Trigenerative Compressed Air Energy Storage System with Solar Thermal Energy

Entropy ◽  
2020 ◽  
Vol 22 (7) ◽  
pp. 764
Author(s):  
Xiaotao Chen ◽  
Xiaodai Xue ◽  
Yang Si ◽  
Chengkui Liu ◽  
Laijun Chen ◽  
...  
Keyword(s):  
Energy Storage ◽  
Energy Demand ◽  
High Efficiency ◽  
Storage System ◽  
Energy Resource ◽  
Energy Storage System ◽  
Compressed Air ◽  
Critical Parameters ◽  
Compressed Air Energy Storage ◽  
Solar Thermal Energy

The comprehensive utilization technology of combined cooling, heating and power (CCHP) systems is the leading edge of renewable and sustainable energy research. In this paper, we propose a novel CCHP system based on a hybrid trigenerative compressed air energy storage system (HT-CAES), which can meet various forms of energy demand. A comprehensive thermodynamic model of the HT-CAES has been carried out, and a thermodynamic performance analysis with energy and exergy methods has been done. Furthermore, a sensitivity analysis and assessment capacity for CHP is investigated by the critical parameters effected on the performance of the HT-CAES. The results indicate that round-trip efficiency, electricity storage efficiency, and exergy efficiency can reach 73%, 53.6%, and 50.6%, respectively. Therefore, the system proposed in this paper has high efficiency and flexibility to jointly supply multiple energy to meet demands, so it has broad prospects in regions with abundant solar energy resource.

scholarly journals Feasibility Analysis of Behind-the-Meter Energy Storage System According to Public Policy on an Electricity Charge Discount Program

2019 ◽  
Vol 11 (1) ◽  
pp. 186 ◽  
Author(s):  
Byuk-Keun Jo ◽  
Seungmin Jung ◽  
Gilsoo Jang
Keyword(s):  
Energy Storage ◽  
Storage Systems ◽  
Storage System ◽  
Participation Rate ◽  
Energy Storage System ◽  
Economic Feasibility ◽  
Demand Side ◽  
Energy Storage Systems ◽  
Study Results ◽  
The Impact

Energy storage systems are crucial in dealing with challenges from the high-level penetration of renewable energy, which has inherently intermittent characteristics. For this reason, various incentive schemes improving the economic profitability of energy storage systems are underway in many countries with an aim to expand the participation rate. The electricity charge discount program, which was introduced in 2015 in Korea, is one of the policies meant to support the economic feasibility of demand-side energy storage systems. This paper quantitatively evaluated the impact of the electricity charge discount program on the economic feasibility of behind-the-meter energy storage systems. In this work, we first summarized how electricity customers can benefit from behind-the-meter energy storage systems. In addition, we represented details of the structure that make up the electricity charge discount program, i.e., how the electricity charge is discounted through the discount scheme. An optimization problem that establishes a charge and discharge schedule of an energy storage system to minimize each consumer’s electricity expenditure was defined and formulated as well. The case study results indicated that the electricity charge discount program has improved the profitability of behind-the-meter energy storage systems, and this improved profitability led to investment in behind-the-meter energy storage systems in Korea. As a result of the electricity charge discount program, Korea’s domestic demand side energy storage system market size, which was only 27 billion dollars in 2015 in Korea, has grown to 825 billion dollars in 2018.

Data Center Energy Conservation by Heat Pipe Cold Energy Storage System

2010 ◽  
Author(s):  
Xiao Ping Wu ◽  
Masataka Mochizuki ◽  
Koichi Mashiko ◽  
Thang Nguyen ◽  
Tien Nguyen ◽  
...  
Keyword(s):  
Energy Storage ◽  
Heat Pipe ◽  
Data Center ◽  
Heat Load ◽  
Data Centers ◽  
Storage Systems ◽  
Storage System ◽  
Energy Storage System ◽  
Energy Storage Systems ◽  
Cold Energy

In this paper, design and economic analysis for applying a novel type of heat pipe into cold energy storage systems have been proposed and discussed. The heat pipe cold energy storage systems can be designed into several types that are ice storage, cold water storage and pre-cool heat exchanger. Those systems can be used for co-operating with conventional chiller system for cooling data centers. The heat load used for discussing in this paper is 8800 kW which represents a large scale data center. The methodology addressed in this paper can be also converted into the middle and small sizes of the data centers. This type of storage system will help to downsize the chiller and decrease its running time that would be able to save significant electricity cost and decrease green house gas emissions from the electricity generation. The proposed systems can be easily connected into the existing conventional systems without major design changes. The analysis in this paper is using Air Freezing Index AFI >= 400 °C-days/year for sizing the heat pipe modules. For the locations where AFI has different value the storage size will be varied accordingly. The paper also addressed a result that an optimum size of cold energy storage system that should be designed at a level to handle 60% of total yearly heat load of a data center.

A Thermodynamic Model of a High Temperature Hybrid Compressed Air Energy Storage System for Grid Storage

2016 ◽  
Author(s):  
Sammy Houssainy ◽  
Reza Baghaei Lakeh ◽  
H. Pirouz Kavehpour
Keyword(s):  
Global Warming ◽  
Energy Storage ◽  
Power Plants ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Compressed Air ◽  
Compressed Air Energy Storage ◽  
Energy Storage Systems

Human activity is overloading our atmosphere with carbon dioxide and other global warming emissions. These emissions trap heat, increase the planet’s temperature, and create significant health, environmental, and climate issues. Electricity production accounts for more than one-third of U.S. global warming emissions, with the majority generated by coal-fired power plants. These plants produce approximately 25 percent of total U.S. global warming emissions. In contrast, most renewable energy sources produce little to no global warming emissions. Unfortunately, generated electricity from renewable sources rarely provides immediate response to electrical demands, as the sources of generation do not deliver a regular supply easily adjustable to consumption needs. This has led to the emergence of storage as a crucial element in the management of energy, allowing energy to be released into the grid during peak hours and meet electrical demands. Compressed air energy storage can potentially allow renewable energy sources to meet electricity demands as reliably as coal-fired power plants. Most compressed air energy storage systems run at very high pressures, which possess inherent problems such as equipment failure, high cost, and inefficiency. This research aims to illustrate the potential of compressed air energy storage systems by illustrating two different discharge configurations and outlining key variables, which have a major impact on the performance of the storage system. Storage efficiency is a key factor to making renewable sources an independent form of sustainable energy. In this paper, a comprehensive thermodynamic analysis of a compressed air energy storage system is presented. Specifically, a detailed study of the first law of thermodynamics of the entire system is presented followed by a thorough analysis of the second law of thermodynamics of the complete system. Details of both discharge and charge cycles of the storage system are presented. The first and second law based efficiencies of the system are also presented along with parametric studies, which demonstrates the effects of various thermodynamic cycle variables on the total round-trip efficiency of compressed air energy storage systems.

scholarly journals Power Distribution Strategy of Microgrid Hybrid Energy Storage System Based on Improved Hierarchical Control

Energies ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 3498 ◽  
Author(s):  
Tiezhou Wu ◽  
Wenshan Yu ◽  
Lujun Wang ◽  
Linxin Guo ◽  
Zhiquan Tang
Keyword(s):  
Energy Storage ◽  
Storage Systems ◽  
Storage System ◽  
Hierarchical Control ◽  
Energy Storage System ◽  
Stable Operation ◽  
Energy Storage Systems ◽  
Hybrid Energy ◽  
Hybrid Energy Storage ◽  
Hybrid Energy Storage System

Traditional hierarchical control of the microgrid does not consider the energy storage status of a distributed hybrid energy storage system. This leads to the inconsistency of the remaining capacity of the energy storage system in the process of system operation, which is not conducive to the safe and stable operation of the system. In this paper, an improved hierarchical control strategy is proposed: the first allocation layer completes the allocation between the distribution energy storage systems considering the state of hybrid energy storage systems, and the second allocation layer realizes the allocation within the hybrid energy storage systems based on variable time constant low-pass filtering. Considering the extreme conditions of energy storage systems, the transfer current is introduced in the second allocation process. The SOC (stage of charge) of the supercapacitor is between 40% and 60%, which ensures that the supercapacitor has enough margin to respond to the power demand. An example of a 300 MW photovoltaic microgrid system in a certain area is analyzed. Compared with the traditional hierarchical control, the proposed control strategy can reduce the SOC change of a hybrid energy storage system by 9% under the same conditions, and make the supercapacitor active after power stabilization, which is helpful to the stable operation of the microgrid.

A Hybrid Energy Storage System Based on Metal Hydrides for Solar Thermal Power and Energy Systems

2016 ◽  
Author(s):  
Shahin Shafiee ◽  
Mary Helen McCay
Keyword(s):  
Energy Storage ◽  
Thermal Energy ◽  
Storage Systems ◽  
Storage System ◽  
Metal Hydrides ◽  
Energy Storage System ◽  
Solar Thermal ◽  
Thermal Mass ◽  
Thermal System ◽  
Solar Thermal System

Thermal storage in an important operational aspect of a solar thermal system which enables it to deliver power or energy when there is no sunlight available. Current thermal storage systems in solar thermal systems work based on transferring the generated heat from sunlight to a thermal mass material in an insulated reservoir and then withdraw it during dark hours. Some common thermal mass materials are stone, concrete, water, pressurized steam, phase changing materials, and molten salts. In the current paper, a hybrid thermal energy storage system which is based on two metal hydrides is proposed for a solar thermal system. The two hydrides which are considered for this system are magnesium hydride and lanthanum nickel. Although metal hydride Energy Storage Systems (ESS) suffer from slow response time which restricts them as a practical option for frequency regulation, off peak shaving and power supply stabilization; they can still demonstrate significant flexibility and good energy capacity. These specifications make them good candidates for thermal energy storage which are applicable to any capacity of a solar thermal system just by changing the size of the ESS unit.

Flywheel Energy Storage Systems for Wind Turbine Grid Frequency Stability: A Review

2011 ◽  
Author(s):  
Ilker Durukan ◽  
Stephen Ekwaro-Osire ◽  
Stephen B. Bayne
Keyword(s):  
Energy Storage ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Storage Systems ◽  
Storage System ◽  
Energy Storage System ◽  
Frequency Stability ◽  
Variable Speed ◽  
Flywheel Energy Storage ◽  
Energy Storage Systems

Most recent grid codes require wind turbines to contribute to the recovery of frequency drops in the grid. More of the recently build wind turbines use variable speed generators. Unlike fixed speed generators, these generators do not naturally contribute to the recovery of the frequency drop since the rotor rpm is decoupled from the grid frequency. This decoupling is achieved by controller and power conditioning units. The studies reviewed in this paper focused on the design of such a controller so that the wind turbine could react to frequency drops. Another approach to responding to frequency drops is to connect an energy storage system to the DC bus of variable speed generator. Flywheels have been used as energy storage systems to fill energy gaps in several applications and can be used for frequency recovery application for wind turbines as well. The objective of this study was to demonstrate the improvement of frequency stability of wind turbines connected to electrical grids in the presence of flywheel energy storage systems (FESS). Studies reviewed show that FESS can enhance the power quality and frequency stability of wind turbines connected to an electrical grid.

scholarly journals A Study of Control Methodologies for the Trade-Off between Battery Aging and Energy Consumption on Electric Vehicles with Hybrid Energy Storage Systems

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 600
Author(s):  
Kevin Mallon ◽  
Francis Assadian
Keyword(s):  
Energy Consumption ◽  
Energy Storage ◽  
Electric Vehicle ◽  
Energy Management ◽  
Storage Systems ◽  
Storage System ◽  
Energy Storage System ◽  
Trade Off ◽  
Hybrid Energy ◽  
Hybrid Energy Storage

Hybrid and electric vehicle batteries deteriorate from use due to irreversible internal chemical and mechanical changes, resulting in decreased capacity and efficiency of the energy storage system. This article investigates the modeling and control of a lithium-ion battery and ultracapacitor hybrid energy storage system for an electric vehicle for improved battery lifespan and energy consumption. By developing a control-oriented aging model for the energy storage components and integrating the aging models into an energy management system, the trade-off between battery degradation and energy consumption can be minimized. This article produces an optimal aging-aware energy management strategy that controls both battery and ultracapacitor aging and compares these results to strategies that control only battery aging, strategies that control battery aging factors but not aging itself, and non-optimal benchmark strategies. A case study on an electric bus with variously-sized hybrid energy storage systems shows that a strategy designed to control battery aging, ultracapacitor aging, and energy losses simultaneously can achieve a 28.2% increase to battery lifespan while requiring only a 7.0% decrease in fuel economy.

Sign in / Sign up

Export Citation Format

Share Document