Capturing Process Knowledge for Multi-Channel Information Systems

2012 ◽  
Vol 3 (1) ◽  
pp. 78-98 ◽  
Author(s):  
Shang Gao ◽  
John Krogstie
Keyword(s):  
Early Stage ◽  
Process Models ◽  
System Support ◽  
Knowledge Capture ◽  
Process Knowledge ◽  
Starting Point ◽  
Channel Information ◽  
Further Development ◽  
Goal Models

In this paper, a case study is used to evaluate the business process characterizing modeling (BPCM) language. The BPCM-framework is meant to guide both business stakeholders and model developers during model-based development. The focus of the approach is the use of BPCM as a starting point for capturing process knowledge when planning and developing information system support. Based on information within the BPCM models, goal models and process models can be developed and used for further development of the BPCM model. The approach in this paper is evaluated using a case study related to the arrangement of a conference series. Through the case study, the authors have confirmed the potential usability and usefulness of BPCM for early stage knowledge capture, getting input for further improvement of the approach.

A Method for Eliciting Goals for Business Process Models based on Non-Functional Requirements Catalogues

2013 ◽  
pp. 226-244 ◽  
Author(s):  
Evellin Cardoso ◽  
João Paulo A. Almeida ◽  
Renata S. S. Guizzardi ◽  
Giancarlo Guizzardi
Keyword(s):  
Business Process ◽  
Process Modeling ◽  
Business Processes ◽  
Business Process Modeling ◽  
Process Models ◽  
Functional Requirements ◽  
Business Process Models ◽  
Traditional Approaches ◽  
Goal Models

While traditional approaches in business process modeling tend to focus on “how” the business processes are performed (adopting a behavioral description in which business processes are described in terms of procedural aspects), in goal-oriented business process modeling, the proposals strive to extend traditional business process methodologies by providing a dimension of intentionality to business processes. One of the key difficulties in enabling one to model goal-oriented processes concerns the identification or elicitation of goals. This paper reports on a case study conducted in a Brazilian hospital, which obtained several goal models represented in i*/Tropos, each of which correspond to a business process also modeled in the scope of the study. NFR catalogues were helpful in goal elicitation, uncovering goals that did not come up during previous interviews prior to these catalogues’ use.

scholarly journals Further refinement of the Corbelling Theory for the equilibrium analysis of corbelled domes

2019 ◽  
Vol 6 (1) ◽  
pp. 30-40
Author(s):  
Aguinaldo Fraddosio ◽  
Nicola Lepore ◽  
Mario Daniele Piccioni
Keyword(s):  
Laser Scanner ◽  
Equilibrium Analysis ◽  
Structural Safety ◽  
Structural Behavior ◽  
Thick Shell ◽  
Starting Point ◽  
Further Development ◽  
Load Conditions

Abstract The aim of this paper is to present a further development of the Corbelling Theory [1] for assessing the structural safety of “false domes” constructions like Trulli, and more generally for corbelled domes. In particular, it is well-known that a corbelled dome of a Trullo is a layered thick shell and that only the thin inner layer (candela) has a structural role. The proposed procedure extends the capabilities of the approach proposed in [2] to more general load conditions, including the infill. The effectiveness of the proposed approach is discussed through the analysis of a paradigmatic case study of a Trullo located in Alberobello. Since the geometry of the construction plays a fundamental role in the structural behavior, the starting point of the analysis was an accurate 3D-laser scanner survey of the dome. The obtained results give some interesting insights about the role of the infill load on the equilibrium of such kind of corbelled domes.

Process Fault Diagnosis Based on Process Model Knowledge: Part II—Case Study Experiments

1991 ◽  
Vol 113 (4) ◽  
pp. 627-633 ◽  
Author(s):  
R. Isermann ◽  
B. Freyermuth
Keyword(s):  
Fault Diagnosis ◽  
Knowledge Acquisition ◽  
Knowledge Base ◽  
Process Models ◽  
Normal Operation ◽  
Problem Solution ◽  
Inference Mechanism ◽  
Process Knowledge ◽  
Fault Trees

A computer assisted fault diagnosis system (CAFD) is considered which allows the early detection and localization of process faults during normal operation or on request. It is based on an on-line engineering expert system and consists of an analytical problem solution, a process knowledge base, a knowledge acquisition component and an inference mechanism. The analytic problem solution uses a process parameter estimation, and the detection of process coefficient changes, which are symptoms of process faults. The process knowledge base is comprised of analytical knowledge in the form of process models and heuristic knowledge in the form of fault trees and fault statistics. In the phase of knowledge acquisition the process specific knowledge like theoretical process models, the normal behavior and fault trees is compiled. The inference mechanism performs the fault diagnosis, based on the observed symptoms, the fault trees, fault probabilities and the process history. This is described in Part I. In Part II, case study experiments with a d.c. motor, centrifugal pump, a heat exchanger and an industrial robot show practical results of the model based fault diagnosis.

scholarly journals Makerspace for skills development in the industry 4.0 era

2019 ◽  
Vol 16 (2) ◽  
pp. 303-315 ◽  
Author(s):  
Eduardo Ferro Dos Santos ◽  
Paul Benneworth
Keyword(s):  
Industry 4.0 ◽  
Teaching And Learning ◽  
Early Stage ◽  
Business Practices ◽  
Learning Spaces ◽  
Strategic Approach ◽  
Starting Point ◽  
Start Ups ◽  
Business To Business

Goal / Purpose: Universities are increasingly investing in makerspaces. These learning spaces are presented as a place where students can share their projects, can innovate using rapid prototyping equipment, use low and high technology that serves as a starting point for students to launch start-ups, get advice on how to place a product in the market, and relate to potential lenders. This paper aims to discuss whether companies can benefit from these projects and whether skills for engineers can be developed in this environment. The paper provides insightful perceptions of the actions developed by one emergent university to develop innovative methodologies to support industry and students, to provide potential partnerships that fund projects in order to better prepare professionals for the industry 4.0. Design / Methodology / Approach: A discussion of the subject was carried out based on the existing literature and an exploratory study in an existing makerspace in the Netherlands. It was one qualitative research based on a case study. Field observation and research questions were based on the technical skills of engineering described in theory. Results: This article presented the idea that the makerspaces can be a great source of innovation if they are appropriately designed. The connection between universities and companies, aligned to active methodologies for teaching and learning meets a global need within a corporate universe to get faster and simpler and make the team see the project in a more holistic and complete manner. However, the goal is to bridge the gap with professors, researchers, makers, start-ups, and companies who want to use business-to-business practices. It can be said that these are beneficial characteristics of a makerspace observed: (i) students' learning is more active, (ii) more interaction between students and professors, through different areas (iii) at an early stage, students get in contact with the professional reality of their field, as the projects are related to real Engineering problems, and (iv) students develop transversal skills. Practical implications: This paper identifies the potential that Makerspaces offer as a strategic approach to teaching and learning related to the fourth industrial era. This paper implies that universities and academics that wish to tailor their education to industry 4.0 need understand this model better, and where appropriate invest in educational infrastructures such as this in universities, companies or cities. This will ensure that universities are educating professionals with the most suitable skills for industry and society, generating innovation in creative teaching and learning spaces. Research Limitations: The study is limited to one empirical research, analysis, and observation of a case study that can serve as a basis for future studies in other locations.

scholarly journals From discovery to delivery: public sector development of the rVSV-ZEBOV Ebola vaccine

2020 ◽  
Author(s):  
Matthew Herder ◽  
Janice E Graham ◽  
Richard Gold
Keyword(s):  
Early Stage ◽  
Phase 1 ◽  
The United States ◽  
Open Science ◽  
Publicly Funded ◽  
The Public ◽  
Government Documents ◽  
Alternative Approach ◽  
Further Development

Abstract The discovery and development of the Ebola rVSV-ZEBOV vaccine challenge the common assumption that the research and development for innovative therapeutic products and vaccines is best carried out by the private sector. Using internal government documents obtained through an access to information request, we analyze the development of rVSV-ZEBOV by researchers at Canada’s National Microbiology Laboratory beyond its patenting and licensing to a biotech company in the United States in 2010. According to government documentation, the company failed to make any progress toward a phase 1 clinical trial until after the WHO Public Health Emergency of International Concern freed substantial donor and public funds for the vaccine’s further development. The development of rVSV-ZEBOV, from sponsoring early stage research through to carrying out clinical trials during the epidemic, was instead the result of the combined efforts of the Canadian government, its researchers, and other publicly funded institutions. This case study of rVSV-ZEBOV underscores the significant public contribution to the R&D of vaccines even under conditions of precarity, and suggests that an alternative approach to generating knowledge and developing interventions, such as open science, is required in order to fully realize the public sector’s contribution to improved global health.

scholarly journals Low-Cost Geographic Information System for Municipal Road Signs Management in Depopulated and Low-Density Areas

2021 ◽  
Vol 1203 (3) ◽  
pp. 032006
Author(s):  
Olga Gonçalves ◽  
Jorge Gonçalves ◽  
Jacek Chmielewski ◽  
Paulina Olenkowicz-Trempała
Keyword(s):  
Low Cost ◽  
Geographic Information ◽  
Road Signs ◽  
Systems Implementation ◽  
Fundamental Information ◽  
Strategic Plans ◽  
Starting Point ◽  
Definition Of ◽  
Further Development

Abstract The current national and regional economical conjuncture in many countries, requires a sustainable management of different urban infrastructures, including road signs. From the set of possible solutions to improve the existing infrastructure’s management, analysis and spatial representation, Geographic Information Systems (GIS) have proved to be an essential tool for the functional competencies of local administration (municipalities), managers of municipal road networks. This study presents a framework of existing national regulations on road signs, as well as the shortcomings in the definition of methodologies for GIS-based management systems implementation. The paper continues with the critical assumptions considered in their definition and the municipalities specific competences needed for their implementation. A low-cost methodology is proposed and applied to a case study in a small Portuguese village: Belmonte. The results have shown the potential of these low-cost systems, revealing relevant time and economical gains, providing municipalities with fundamental information for the definition of realistic and well-founded strategic plans and budgets, and allowing better information to their citizens. The gathered information can help in inventory, inspections, maintenance and replacement allowing detailed reports and geo-referenced electronic database and maps of a municipality's road signs at reasonable costs. These maps and reports are the starting point to forecast the projected lifespan of the municipality's signage allowing more accurate project sign management budgets for future years. Aspects that need further development in order to improve the proposed system are also addressed.

A Method for Eliciting Goals for Business Process Models based on Non-Functional Requirements Catalogues

2011 ◽  
Vol 2 (2) ◽  
pp. 1-18 ◽  
Author(s):  
Evellin Cardoso ◽  
João Paulo A. Almeida ◽  
Renata S. S. Guizzardi ◽  
Giancarlo Guizzardi
Keyword(s):  
Business Process ◽  
Process Modeling ◽  
Business Processes ◽  
Business Process Modeling ◽  
Process Models ◽  
Functional Requirements ◽  
Business Process Models ◽  
Traditional Approaches ◽  
Goal Models

While traditional approaches in business process modeling tend to focus on “how” the business processes are performed (adopting a behavioral description in which business processes are described in terms of procedural aspects), in goal-oriented business process modeling, the proposals strive to extend traditional business process methodologies by providing a dimension of intentionality to business processes. One of the key difficulties in enabling one to model goal-oriented processes concerns the identification or elicitation of goals. This paper reports on a case study conducted in a Brazilian hospital, which obtained several goal models represented in i*/Tropos, each of which correspond to a business process also modeled in the scope of the study. NFR catalogues were helpful in goal elicitation, uncovering goals that did not come up during previous interviews prior to these catalogues’ use.

Wissensasymmetrien, Interaktionsrollen und die Frage der „gemeinsamen“ Sprache in der interdisziplinären Projektkommunikation

Fachsprache ◽  
2017 ◽  
Vol 33 (3-4) ◽  
pp. 187-204
Author(s):  
Nina Janich ◽  
Ekaterina Zakharova
Keyword(s):  
Process Models ◽  
Project Work ◽  
Common Language ◽  
Project Proposal ◽  
Communication Problems ◽  
Project Participants ◽  
Interdisciplinary Projects ◽  
Social Scientific ◽  
Initial Results

goal of the present discourse analysis is to report on the initial results of a DFG project on communication in interdisciplinary projects. Based on a case study, the following questions were investigated: 1) at what times or phases of a project communication problems occur, 2) what kinds of problems occur as a result of knowledge asymmetries, and 3) which interactive and discourse roles do participants take on when facing such problems? Three main conclusions can be drawn from the findings; first, that linguistic-communicative problems occurring in interdisciplinary projects are not simply a result of attempts to find a “common language”, but are grounded in issues of contextual, methodological, organisitory, and socio-pragmatic agreements. Second, these communication problems arise during the initial, preparatory phases of a project, earlier than social scientific process models suggest, i. e. as early as the writing and submission of the project proposal, as opposed to when the project work actually begins. Third, that these problems, induced by the inevitable presence of knowledge asymmetries among participants, must be resolved not only through active and consistent meta-communication, but also through meta-meta-communication. Evidence for these findings was gathered by means of interviews with project participants in which they reflected on the phase of jointly writing their project proposal from the perspective of their respective disciplines.

A Proof for the Possibility of Ce-Oxide from CMP Residuals in Si-Wafers by Analytical TEM

2012 ◽  
Author(s):  
Wayne Zhao ◽  
Liem Do Thanh ◽  
Michael Gribelyuk ◽  
Mary-Ann Zaitz ◽  
Wing Lai
Keyword(s):  
Technology Development ◽  
Early Stage ◽  
Chemical Mechanical Planarization ◽  
Particle Cluster ◽  
Limited Region ◽  
Physical Evidence ◽  
Analytical Tem ◽  
Transmission Electron ◽  
Oxide Particles

Abstract Inclusion of cerium (Ce) oxide particles as an abrasive into chemical mechanical planarization (CMP) slurries has become popular for wafer fabs below the 45nm technology node due to better polishing quality and improved CMP selectivity. Transmission electron microscopy (TEM) has difficulties finding and identifying Ce-oxide residuals due to the limited region of analysis unless dedicated efforts to search for them are employed. This article presents a case study that proved the concept in which physical evidence of Ce-rich particles was directly identified by analytical TEM during a CMP tool qualification in the early stage of 20nm node technology development. This justifies the need to setup in-fab monitoring for trace amounts of CMP residuals in Si-based wafer foundries. The fact that Cr resided right above the Ce-O particle cluster, further proved that the Ce-O particles were from the wafer and not introduced during the sample preparation.

Sign in / Sign up

Export Citation Format

Share Document