A New Study of China's Advanced Water Injection Technology for Low-Permeability Reservoirs

2013 ◽  
Vol 273 ◽  
pp. 55-59
Author(s):  
Leng Tian ◽  
Ming Xu Ma ◽  
Shun Li He
Keyword(s):  
New Technology ◽  
Water Injection ◽  
Pressure Rise ◽  
Oil Production ◽  
Recent Decade ◽  
Simple Equation ◽  
Low Permeability ◽  
Injection Technology ◽  
Low Permeability Reservoirs

China has large volumes of low-permeability reservoirs, distributed widely in the Ordos, Karamay and Songliao basins. In the recent decade, a new technology called advanced water injection (AWI), which is to inject water into formation to increase or maintain pressure for 3 to 6 months before oil production, has been applied to efficiently develop low-permeability reservoirs. This paper studies mechanisms and applications of AWI in China. Especially, its resent application in Xifeng oilfield has been described in detail. Most importantly, this paper proposes a simple equation to calculate optimal injected volume of water and pressure rise.

Permeability Limits of Advanced Water Injection Technology in Low Permeability Reservoirs

2016 ◽  
Author(s):  
Shuai Wang ◽  
Ji Tian ◽  
Xianhong Tan ◽  
Ling Wang ◽  
Shaohui Zhang
Keyword(s):  
Water Injection ◽  
Low Permeability ◽  
Injection Technology ◽  
Low Permeability Reservoirs

The Research and Evaluation of Finely Layered Water Injection Standard in Low-Permeability Reservoirs - A Case from Block A in one Low-Permeability Reservoir

2014 ◽  
Vol 1073-1076 ◽  
pp. 2310-2315 ◽  
Author(s):  
Ming Xian Wang ◽  
Wan Jing Luo ◽  
Jie Ding
Keyword(s):  
Oil Recovery ◽  
Water Injection ◽  
Injection Pressure ◽  
Injection Rate ◽  
Low Permeability ◽  
Reservoir Permeability ◽  
Engineering Parameters ◽  
The Common ◽  
Common Problems ◽  
Low Permeability Reservoirs

Due to the common problems of waterflood in low-permeability reservoirs, the reasearch of finely layered water injection is carried out. This paper established the finely layered water injection standard in low-permeability reservoirs and analysed the sensitivity of engineering parameters as well as evaluated the effect of the finely layered water injection standard in Block A with the semi-quantitative to quantitative method. The results show that: according to the finely layered water injection standard, it can be divided into three types: layered water injection between the layers, layered water injection in inner layer, layered water injection between fracture segment and no-fracture segment. Under the guidance of the standard, it sloved the problem of uneven absorption profile in Block A in some degree and could improve the oil recovery by 3.5%. The sensitivity analysis shows that good performance of finely layered water injection in Block A requires the reservoir permeability ratio should be less than 10, the perforation thickness should not exceed 10 m, the amount of layered injection layers should be less than 3, the surface injection pressure should be below 14 MPa and the injection rate shuold be controlled at about 35 m3/d.

Research on Flow Units of Extra-Low Permeability Reservoirs in Fault Block Sheng554 of Shengping Oilfield

2013 ◽  
Vol 295-298 ◽  
pp. 3162-3165
Author(s):  
Lu Lu Zhou ◽  
Zi Nan Li ◽  
Jun Gang Liu ◽  
Yan Yun Zhang ◽  
Guang Qiang Shu
Keyword(s):  
Fluid Flow ◽  
Water Injection ◽  
Type A ◽  
Low Permeability ◽  
Type B ◽  
Flow Units ◽  
Fault Block ◽  
Remaining Oil ◽  
Type C ◽  
Low Permeability Reservoirs

Taking the example of the fourth member of the Lower Cretaceous Quantou formation reservoirs in fault block Sheng554 of Sanzhao sag, this article discusses the methodology of flow units in extra-low permeability reservoirs. The research on flow units in such reservoirs can be divided into two ranks, one is to determine the distribution of seepage barriers and inner connected sands， the other is to analyze the differentia of fluid flow in the inner connected sands so as to subdivide the flow units. The result shows that the pelitic barriers are rather developed in fault block Sheng554. Through the analysis of differentia of fluid flow, according to the value of flow zone index (FZI), the inner connected sands can be classified into three types of flow units, among which type A with FZI value greater than 1.0 has better permeable property and higher intensity of water injection, and the ability of permeability and water injection of type B with FZI value between 0.5 and 1.0 takes the second place, and type C is the worst flow unit with the worst permeable property and intensity of water injection with FZI value less than 0.5. Among the three types of flow units, type A poorly develops, while type B and type C develops well. The research on flow units can provide reliable geologic bases for forecasting the distribution of remaining oil in extra-low permeability reservoirs and for developing remaining oil in the study area.

Research and practice on fluctuation water injection technology at low permeability coal seam

2012 ◽  
Vol 50 (4) ◽  
pp. 851-856 ◽  
Author(s):  
Wei-min Cheng ◽  
Wen Nie ◽  
Gang Zhou ◽  
Yanbin Yu ◽  
Youying Ma ◽  
...  
Keyword(s):  
Coal Seam ◽  
Water Injection ◽  
Low Permeability ◽  
Research And Practice ◽  
Injection Technology

scholarly journals Semi-analytical modeling of advanced water injection in low permeability reservoirs under non-Darcy-flow condition

2019 ◽  
Vol 11 (5) ◽  
pp. 168781401984676 ◽  
Author(s):  
Chengyong Li ◽  
Jing Yang ◽  
Jianwen Ye ◽  
Jun Zhou ◽  
Ran Zhang ◽  
...  
Keyword(s):  
Flow Condition ◽  
Analytical Modeling ◽  
Water Injection ◽  
Darcy Flow ◽  
Low Permeability ◽  
Low Permeability Reservoirs

scholarly journals The efficiency of gas injection into low-permeability multilayer hydrocarbon reservoirs

2021 ◽  
Vol 3 (10) ◽  
pp. 100-108
Author(s):  
Sudad H AL-Obaidi ◽  
Miel Hofmann ◽  
Falah H. Khalaf ◽  
Hiba H. Alwan
Keyword(s):  
Hydraulic Fracturing ◽  
Oil Recovery ◽  
Gas Injection ◽  
Oil Production ◽  
Recovery Factor ◽  
Low Permeability ◽  
Compositional Model ◽  
Multistage Hydraulic Fracturing ◽  
Low Permeability Reservoirs ◽  
Working Agent

The efficiency of gas injection for developing terrigenous deposits within a multilayer producing object is investigated in this article. According to the results of measurements of the 3D hydrodynamic compositional model, an assessment of the oil recovery factor was made. In the studied conditions, re-injection of the associated gas was found to be the most technologically efficient working agent. The factors contributing to the inefficacy of traditional methods of stimulating oil production such as multistage hydraulic fracturing when used to develop low-permeability reservoirs have been analyzed. The factors contributing to the inefficiency of traditional oil-production stimulation methods, such as multistage hydraulic fracturing, have been analysed when they are applied to low-permeability reservoirs. The use of a gas of various compositions is found to be more effective as a working agent for reservoirs with permeability less than 0.005 µm2. Ultimately, the selection of an agent for injection into the reservoir should be driven by the criteria that allow assessing the applicability of the method under specific geological and physical conditions. In multilayer production objects, gas injection efficiency is influenced by a number of factors, in addition to displacement, including the ratio of gas volumes, the degree to which pressure is maintained in each reservoir, as well as how the well is operated. With the increase in production rate from 60 to 90 m3 / day during the re-injection of produced hydrocarbon gas, this study found that the oil recovery factor increased from 0.190 to 0.229. The further increase in flow rate to 150 m3 / day, however, led to a faster gas breakthrough, a decrease in the amount of oil produced, and a decrease in the oil recovery factor to 0.19 Based on the results of the research, methods for stimulating the formation of low-permeability reservoirs were ranked based on their efficacy.

The Research of Layer System Subdivision and Adjustment Methods in YSL Block of the Low Permeability Reservoirs

2013 ◽  
Vol 274 ◽  
pp. 153-156
Author(s):  
Rong Hua Li ◽  
Jun Ting Zhang ◽  
Cheng Lin Zhang ◽  
Huan Huan Zhang ◽  
Peng Qu
Keyword(s):  
Water Injection ◽  
Oil Field ◽  
Thin Layers ◽  
Water Flooding ◽  
Low Permeability ◽  
Layer System ◽  
Oil Distribution ◽  
Major Adjustment ◽  
Low Permeability Reservoirs ◽  
Oilfield Development

Layer system subdivision and adjustment is applied in oilfield development to ease the contradiction in inner-layer and interlayer and implement separated layer water flooding well, which is a major adjustment measure to improve developing effects. YSL is a typical low-permeability oil field, whose petrophysics is poor, and which exist many problems, such as apparent contradictions between layers, and poor development effects through separated zone water injection and so on. In this article, the thickness of barriers, injection profile, permeability contrast and remaining oil distribution are analyzed comprehensively. So a reasonable method is also proposed. Much weakness that factors are not comprehensive in adjustment method and that the problems in the development process are not accurately reflected is overcome, which exists in the past methods. The adjustment means can utilize poor thin layers better, reduce invalid water injection and ease the contradictions between layer, and oilfield development effects are improved eventually. It is a reference and guidance for other blocks or oilfield which exist the same problems.

Sign in / Sign up

Export Citation Format

Share Document