The Application and Evaluation of the Heat Medium Heater in Changqing Oil Field Production

2013 ◽  
Vol 291-294 ◽  
pp. 1653-1656
Author(s):  
Xu Feng Chen ◽  
Cui Hua Zhao ◽  
Jia Ming Zhou ◽  
Hai Jing Shen
Keyword(s):  
Large Scale ◽  
Field Application ◽  
Heating Furnace ◽  
Oil Field ◽  
Field Energy ◽  
Steam Boiler ◽  
Heating Equipment ◽  
Safe Production ◽  
New Type ◽  
Save Energy

As a new type of heating equipment, the heat medium heater furnace overcomes the shortage of the traditional heating methods such as the boiler, heating furnace. Through the comparison and analysis of the field application between the heat medium heater, YQWP - 4000/1.6/220/180-QT, and steam boiler in a central gathering station of Changqing oil field, results indicated: in the condition of 0.3 MPa pressure and 200 °Ctemperature above, the heat medium heater is higher thermal efficiency, more safety and security than steam boiler, and it do not pollute the environment and significantly save energy. One the heat medium heater saves by 982700 RMB than one set of steam boiler per each year. Due to the good economy, heat medium heater is suitable for the heating and heat supply of the large-scale central gathering station in the oil field. Thus, heat medium heater has a good application prospects. And the field application of the heat medium heater provides oil field energy saving and safe production with a certain reference in oil field.

Sucker Rod Antibuckling System: Development and Field Application

2021 ◽  
pp. 1-16
Author(s):  
Clemens Langbauer ◽  
Rudolf Konrad Fruhwirth ◽  
Lukas Volker
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Cost Optimization ◽  
Field Application ◽  
Oil Field ◽  
Oil Fields ◽  
Test Facility ◽  
System Efficiency ◽  
Pumping System ◽  
Sucker Rod

Summary When the oil price is low, cost optimization is vital, especially in mature oil fields. Reducing lifting costs by increasing the mean time between failure and the overall system efficiency helps to keep wells economical and increase the final recovery factor. A significant portion of artificially lifted wells currently use sucker rod pumping systems. Although its efficiency is in the upper range, there is still room for improvement compared with other artificial-liftsystems. This paper presents the field-tested sucker rod antibuckling system (SRABS), which prevents buckling of the entire sucker rod string, achieved by a redesign of the standing valve, the advantageous use of the dynamic liquid level, and, on a case-by-case basis, application of a tension element. The system allows full buckling prevention and a reduction of the overall stresses in the sucker rod string. The resulting reduction in the number of well interventions combined with the higher system efficiency prolongs economic production in mature oil fields, even in times of low oil prices. The analysis of SRABS, using finite-element simulations, showed a significant increase in system efficiency. The SRABS performance and wear tests under large-scale conditions were performed at Montanuniversität Leoben’s Pump Test Facility and in the oil field. The results of intensive laboratory testing were used to optimize the pump-body geometry and improve the wear resistance by selecting optimal materials for the individual pump components. The ongoing field-test evaluation confirmed the theoretical approach and showed the benefits achieved by using SRABS. SRABS itself can be applied within every sucker rod pumping system; the installation is as convenient as a standard pump, and manufacturing costs are comparable with those of a standard pump. This paper shows improved performance of the SRABS pumping system compared with a standard sucker rod pump. SRABS is one of the first systems that prevents the sucker rod string from buckling without any additional equipment, such as sinker bars. Testing of SRABS has identified significant benefits compared with standard sucker rod pumps.

Hybrid Combination of GIS,GPS,WSN and GPRS Technology in Modern Digital Agriculture Application

2010 ◽  
Vol 108-111 ◽  
pp. 1158-1163 ◽  
Author(s):  
Peng Cheng Nie ◽  
Di Wu ◽  
Weiong Zhang ◽  
Yan Yang ◽  
Yong He
Keyword(s):  
Large Scale ◽  
Field Application ◽  
Wireless Sensor ◽  
Information Collection ◽  
Scale Field ◽  
Large Scale Field ◽  
Field Information ◽  
Intelligent Management ◽  
Digital Agriculture ◽  
And Control

In order to improve the information management of the modern digital agriculture, combined several modern digital agriculture technologies, namely wireless sensor network (WSN), global positioning system (GPS), geographic information system (GIS) and general packet radio service (GPRS), and applied them to the information collection and intelligent control process of the modern digital agriculture. Combining the advantage of the local multi-channel information collection and the low-power wireless transmission of WSN, the stable and low cost long-distance communication and data transmission ability of GPRS, the high-precision positioning technology of the DGPS positioning and the large-scale field information layer-management technology of GIS, such a hybrid technology combination is applied to the large-scale field information and intelligent management. In this study, wireless sensor network routing nodes are disposed in the sub-area of field. These nodes have GPS receiver modules and the electric control mechanism, and are relative positioned by GPS. They can real-time monitor the field information and control the equipment for the field application. When the GPS position information and other collected field information are measured, the information can be remotely transmitted to PC by GPRS. Then PC can upload the information to the GIS management software. All the field information can be classified into different layers in GIS and shown on the GIS map based on their GPS position. Moreover, we have developed remote control software based on GIS. It can send the control commands through GPRS to the nodes which have control modules; and then we can real-time manage and control the field application. In conclusion, the unattended automatic wireless intelligent technology for the field information collection and control can effectively utilize hardware resources, improve the field information intelligent management and reduce the information and intelligent cost.

scholarly journals Fabrication of microcapsule extinguishing agent with core-shell structure for lithium-ions battery fire safety

2021 ◽  
Author(s):  
Weixin Zhang ◽  
Lin Wu ◽  
Dujin Qiao ◽  
Jie Tian ◽  
Yan Li ◽  
...  
Keyword(s):  
Large Scale ◽  
Urea Formaldehyde ◽  
Lithium Ion ◽  
Formaldehyde Resin ◽  
Shell Material ◽  
Lithium Ions ◽  
Safety Issues ◽  
Fire Extinguishing ◽  
New Type ◽  
Core Shell Structure

Safety issues limit the large-scale application of lithium-ion batteries. In this work, a new type of N-H-microcapsule fire extinguishing agent is prepared by using melamine-urea-formaldehyde resin as shell material, perfluoro(2-methyl-3-pentanone)...

scholarly journals Injection-production optimization of carbonate reservoir based on an inter-well connectivity model

2021 ◽  
pp. 014459872199465
Author(s):  
Yuhui Zhou ◽  
Sheng Lei ◽  
Xuebiao Du ◽  
Shichang Ju ◽  
Wei Li
Keyword(s):  
History Matching ◽  
Water Injection ◽  
Field Application ◽  
Carbonate Reservoir ◽  
Production Optimization ◽  
Oil Field ◽  
Carbonate Reservoirs ◽  
Utilization Rate ◽  
Production Volume ◽  
Connectivity Model

Carbonate reservoirs are highly heterogeneous. During waterflooding stage, the channeling phenomenon of displacing fluid in high-permeability layers easily leads to early water breakthrough and high water-cut with low recovery rate. To quantitatively characterize the inter-well connectivity parameters (including conductivity and connected volume), we developed an inter-well connectivity model based on the principle of inter-well connectivity and the geological data and development performance of carbonate reservoirs. Thus, the planar water injection allocation factors and water injection utilization rate of different layers can be obtained. In addition, when the proposed model is integrated with automatic history matching method and production optimization algorithm, the real-time oil and water production can be optimized and predicted. Field application demonstrates that adjusting injection parameters based on the model outputs results in a 1.5% increase in annual oil production, which offers significant guidance for the efficient development of similar oil reservoirs. In this study, the connectivity method was applied to multi-layer real reservoirs for the first time, and the injection and production volume of injection-production wells were repeatedly updated based on multiple iterations of water injection efficiency. The correctness of the method was verified by conceptual calculations and then applied to real reservoirs. So that the oil field can increase production in a short time, and has good application value.

Downhole CO2 partial pressure calculation and tubing material selection – a case study of an offshore oil field in the South China Sea

2016 ◽  
Vol 63 (5) ◽  
pp. 414-420 ◽  
Author(s):  
Wei Yan ◽  
Yong Xiang ◽  
Wenliang Li ◽  
Jingen Deng
Keyword(s):  
Partial Pressure ◽  
Pressure Profile ◽  
Field Application ◽  
Separation Process ◽  
Oil Field ◽  
Oil Well ◽  
Content Type ◽  
Calculating Method ◽  
Oil Gas

Purpose This paper aims to establish the downhole CO2 partial pressure profile calculating method and then to make an economical oil country tubular goods (OCTG) anti-corrosion design. CO2 partial pressure is the most important parameter to the oil and gas corrosion research for these wells which contain sweet gas of CO2. However, till now, there has not been a recognized method for calculating this important value. Especially in oil well, CO2 partial pressure calculation seems more complicated. Based on Dolton partial pressure law and oil gas separation process, CO2 partial pressure profile calculating method in oil well is proposed. A case study was presented according to the new method, and two kinds of corrosion environment were determined. An experimental research was conducted on N80, 3Cr-L80 and 13Cr-L80 material. Based on the test results, 3Cr-L80 was recommended for downhole tubing. Combined with the field application practice, 3Cr-L80 was proved as a safety and economy anti-corrosion tubing material in this oil field. A proper corrosion parameter (mainly refers to CO2 partial pressure and temperature) can ensure a safety and economy downhole tubing anti-corrosion design. Design/methodology/approach Based on Dolton partial pressure law and oil gas separation process, CO2 partial pressure profile calculating method in oil well is proposed. An experimental research was conducted on N80, 3Cr-L80 and 13Cr-L80 material. A field application practice was used. Findings It is necessary to calculate the CO2 partial pressure properly to ensure a safety and economy downhole tubing (or casing) anti-corrosion design. Originality/value The gas and oil separation theory and corrosion theory are combined together to give a useful method in downhole tubing anti-corrosion design method.

Research on a New Type of Lithium Battery String Equalization and Management System

2011 ◽  
Vol 383-390 ◽  
pp. 1470-1476
Author(s):  
Hao Wang ◽  
Ding Guo Shao ◽  
Lu Xu
Keyword(s):  
Lithium Batteries ◽  
Management System ◽  
Lithium Battery ◽  
Large Scale ◽  
Control Method ◽  
Balance Control ◽  
Industrial Applications ◽  
Control Technique ◽  
New Type ◽  
Management Functions

Lithium battery has been employed widely in many industrial applications. Parameter mismatches between lithium batteries along a series string is the critical limits of the large-scale applications in high power situation. Maintaining equalization between batteries is the key technique in lithium batteries application. This paper summarizes normal equalization techniques and proposed a new type of lithium Battery Equalization and Management System (BEMS) employing the isolated DC-DC converter structure. The system is integrated both equalization functions and management functions by using distributed 3-level controlled structure and digital control technique. With this control method the flexibility of the balance control strategy and the compatibility for different battery strings are both improved dramatically. The experimental results show optimizing equalization, efficiency and the battery string life span has been extended.

Sign in / Sign up

Export Citation Format

Share Document