Research on a New Type of Lithium Battery String Equalization and Management System

2011 ◽  
Vol 383-390 ◽  
pp. 1470-1476
Author(s):  
Hao Wang ◽  
Ding Guo Shao ◽  
Lu Xu
Keyword(s):  
Lithium Batteries ◽  
Management System ◽  
Lithium Battery ◽  
Large Scale ◽  
Control Method ◽  
Balance Control ◽  
Industrial Applications ◽  
Control Technique ◽  
New Type ◽  
Management Functions

Lithium battery has been employed widely in many industrial applications. Parameter mismatches between lithium batteries along a series string is the critical limits of the large-scale applications in high power situation. Maintaining equalization between batteries is the key technique in lithium batteries application. This paper summarizes normal equalization techniques and proposed a new type of lithium Battery Equalization and Management System (BEMS) employing the isolated DC-DC converter structure. The system is integrated both equalization functions and management functions by using distributed 3-level controlled structure and digital control technique. With this control method the flexibility of the balance control strategy and the compatibility for different battery strings are both improved dramatically. The experimental results show optimizing equalization, efficiency and the battery string life span has been extended.

Research and Design on Lithium Battery Management System in Communication Equipment

2014 ◽  
Vol 1079-1080 ◽  
pp. 984-990
Author(s):  
Hong Lin Kan ◽  
Ya Ping Xiao ◽  
Yu Yun Xu
Keyword(s):  
Lithium Batteries ◽  
Management System ◽  
Communication Systems ◽  
Lithium Battery ◽  
Battery Management System ◽  
Battery Management ◽  
Communication Industry ◽  
New Type ◽  
Battery Technology ◽  
Research And Design

As a communication system power, the lithium battery would be the trend of industry in the wake of development in battery technology. Communication systems have special requirement for lithium battery like low power consumption, high stability and data remote visibility. In this paper, a new type of lithium batteries management system is designed to fit the application of lithium batteries in the communication industry.

SVR CONTROLLER FOR A BIPED ROBOT IN THE SAGITTAL PLANE WITH HUMAN-BASED ZMP TRAJECTORY REFERENCE AND GAIT

2012 ◽  
Vol 09 (03) ◽  
pp. 1250018 ◽  
Author(s):  
JOÃO P. FERREIRA ◽  
MANUEL CRISÓSTOMO ◽  
A. PAULO COIMBRA
Keyword(s):  
Control Method ◽  
Sagittal Plane ◽  
Balance Control ◽  
Biped Robot ◽  
Control Technique ◽  
Human Gait ◽  
Support Vector ◽  
Shift Parameter ◽  
Intelligent Computing ◽  
Swing Time

This paper introduces two new important issues to be considered in the design of the zero moment point (ZMP) trajectory of a biped robot. It was verified experimentally that in the human gait the ZMP trajectory moves along the foot in a way that it is shifted forward relative to its center. To take this into account a shift parameter is then proposed. It was also verified experimentally that in the human gait the ZMP trajectory amplitude depends on the swing time, reducing to zero for a static gait. It is then proposed a parameter to take into account this variation with the swing time of the gait. Six experiments were carried out for three different X ZMP trajectory references. In order to evaluate and compare the performance of the biped robot using the three X ZMP trajectory references two performance indexes are proposed. For the real-time balance control of this 8 link biped robot it was used an intelligent computing control technique, the Support Vector Regression (SVR). The control method uses the ZMP error and its variation as inputs and the output is the correction of the robot's ankle and torso angles, necessary for the sagittal balance of the biped robot.

scholarly journals Study of Flood Control Capability and Advanced Application of Multiple Dams Constructed in Series

2013 ◽  
Vol 8 (3) ◽  
pp. 447-455 ◽  
Author(s):  
Hideo Oshikawa ◽  
◽  
Yuka Mito ◽  
Toshimitsu Komatsu ◽  
Keyword(s):  
Flood Control ◽  
Large Scale ◽  
Control Method ◽  
Upstream Region ◽  
Small Scale ◽  
Water Utilization ◽  
In Series ◽  
New Type ◽  
Cascade Method ◽  
Cascade Type

The new concept for flood control called ‘Cascade’ method which permits dams to overflow around an upstream region with a sequence of dams constructed in a river is proposed. Multiple small scale dry dams should be constructed in series instead of a large scale dam in order to prevent flood disaster and preserve the natural environment. Recently a flood control dam with a bottom outlet hole as its regular spillway, known as ‘dry dam’, has been reviewed, planned and built in some sites in Japan. Under a condition of a common reservoir capacity, the Cascade type flood control permitting upstream dams to overflow except for the most downstream dam in a river is compared with a conventional one not to overflow each dam in a numerical simulation. As a result, it is made clear that the Cascade method using multiple dry dams is much more effective than the conventional one. In this connection, the Cascade type flood control method permitting upstream dams to overflow from emergency spillways except for the most downstream dam can be applied to normal storage dams with slide gates operated conventionally. Therefore, it could become an effective adaptation method for the global warming problem since it is performed by only changing how to operate slide gates in existing storage dams constructed in series. In addition, we also propose a new type of dry dam that has a closable and openable gate for its regular spillway primarily to retain the water for the water utilization. The new type of dry dam, which should be constructed in the upper reach away from the existing downstream storage dam needing still more its capacity for water utilization, ensures the amount of water available for the use by closing the regular spillway after the new dry dam is at full capacity, and the flood control capacity of the dams including the new dry dam is stronger than that of the normal dams owing to the storage function with the new dry dam. The new dry dams may improve the water utilization, the flood control, and environmentfriendliness under the current condition in Thailand damaged by the severe flood in 2011.

scholarly journals Effect of Slot Width and Density on Slotted Liner Performance in SAGD Operations

Energies ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 268
Author(s):  
Yujia Guo ◽  
Alireza Nouri ◽  
Siavash Nejadi
Keyword(s):  
Large Scale ◽  
Control Method ◽  
Slot Width ◽  
Control Technique ◽  
Sand Production ◽  
Fines Migration ◽  
Pressure Drops ◽  
Sand Control ◽  
Mechanical Methods ◽  
Triaxial Cell

Sand production from a poorly consolidated reservoir could give rise to some severe problems during production. Holding the load bearing solids in place is the main goal of any sand control technique. The only sand control techniques that have found applications in steam assisted gravity drainage (SAGD) are some of the mechanical methods, including wire wrapped screens, slotted liners and more recently, punched screens. Slotted liner is one of the most effective mechanical sand control methods in the unconsolidated reservoir exploitation, which has proven to be the preferred sand control method in the SAGD operations. The main advantage of the slotted liners that makes them suitable for SAGD operations is their superior mechanical integrity for the completion of long horizontal wells. This study is an attempt to increase the existing understanding of the fines migration, sand production, and plugging tendency for slotted liners by using a novel large-scale scaled completion test (SCT) facility. A triaxial cell assembly was used to load sand-packs with specified and controlled grain size distribution, shape and mineralogy, on multi-slot sand control coupons. Different stress levels were applied parallel and perpendicular to different combinations of slot width and density in multi-slot coupons, while brine was injected from the top of the sand-pack towards the coupon. At each stress level, the mass of produced sand was measured, and the pressure drops along the sand-pack and coupon were recorded. Fines migration was also investigated by measuring fines/clay concentration along the sand-pack. The current study employed multi-slot coupons to investigate flow interactions among slots and its effect on the flow performance of liner under typically encountered stresses in SAGD wells. According to the experimental observations, increasing slot width generally reduces the possibility of pore plugging caused by fines migration. However, there is a limit for slot aperture beyond which the plugging is not reduced any further, and only a higher level of sanding occurs. Test measurements also indicated that besides the slot width, the slot density also influences the level of plugging and sand production and must be included in the design criteria.

Two-degree-of-freedom Controller Design for Uncertain Processes Using Input/output Linearization Control Technique

2011 ◽  
Vol 11 (1) ◽  
pp. 16 ◽  
Author(s):  
Pisit Sukkarnkha ◽  
Chanin Panjapornpon
Keyword(s):  
Disturbance Rejection ◽  
Control Structure ◽  
Control Method ◽  
Random Noise ◽  
Degree Of Freedom ◽  
Control Technique ◽  
Input Output ◽  
Tracking Controller ◽  
Two Degree Of Freedom ◽  
Input Output Linearization

In this work, a new control method for uncertain processes is developed based on two-degree-of-freedom control structure. The setpoint tracking controller designed by input/output linearization technique is used to regulate the disturbance-free output and the disturbance rejection controller designed is designed by high-gain technique. The advantage of two-degree-of-freedom control structure is that setpoint tracking and load disturbance rejection controllers can be designed separately. Open-loop observer is applied to provide disturbance-free response for setpoint tracking controller. The process/disturbance-free model mismatches are fed to the disturbance rejection controller for reducing effect of disturbance. To evaluate the control performance, the proposed control method is applied through the example of a continuous stirred tank reactor with unmeasured input disturbances and random noise kinetic parametric uncertainties. The simulation results show that both types of disturbances can be effectively compensated by the proposed control method.

Sorting, regrouping, and echelon utilization of the large-scale retired lithium batteries: A critical review

2021 ◽  
Vol 146 ◽  
pp. 111162
Author(s):  
Xin Lai ◽  
Yunfeng Huang ◽  
Cong Deng ◽  
Huanghui Gu ◽  
Xuebing Han ◽  
...  
Keyword(s):  
Lithium Batteries ◽  
Critical Review ◽  
Large Scale

scholarly journals Fabrication of microcapsule extinguishing agent with core-shell structure for lithium-ions battery fire safety

2021 ◽  
Author(s):  
Weixin Zhang ◽  
Lin Wu ◽  
Dujin Qiao ◽  
Jie Tian ◽  
Yan Li ◽  
...  
Keyword(s):  
Large Scale ◽  
Urea Formaldehyde ◽  
Lithium Ion ◽  
Formaldehyde Resin ◽  
Shell Material ◽  
Lithium Ions ◽  
Safety Issues ◽  
Fire Extinguishing ◽  
New Type ◽  
Core Shell Structure

Safety issues limit the large-scale application of lithium-ion batteries. In this work, a new type of N-H-microcapsule fire extinguishing agent is prepared by using melamine-urea-formaldehyde resin as shell material, perfluoro(2-methyl-3-pentanone)...

scholarly journals Time-resolved PIV measurements of a deflected submerged jet interacting with liquid-gas and liquid-liquid interfaces

2021 ◽  
Author(s):  
Stefan Puttinger ◽  
Mahdi Saeedipour
Keyword(s):  
Liquid Layer ◽  
Large Scale ◽  
Free Surface Flow ◽  
Industrial Applications ◽  
Liquid Pool ◽  
Surface Flow ◽  
Two Phase ◽  
Time Resolved ◽  
Submerged Jet ◽  
Major Interest

AbstractThis paper presents an experimental investigation on the interactions of a deflected submerged jet into a liquid pool with its above interface in the absence and presence of an additional lighter liquid. Whereas the former is a free surface flow, the latter mimics a situation of two stratified liquids where the liquid-liquid interface is disturbed by large-scale motions in the liquid pool. Such configurations are encountered in various industrial applications and, in most cases, it is of major interest to avoid the entrainment of droplets from the lighter liquid into the main flow. Therefore, it is important to understand the fluid dynamics in such configurations and to analyze the differences between the cases with and without the additional liquid layer. To study this problem, we applied time-resolved particle image velocimetry experiments with high spatial resolution. A detailed data analysis of a small layer beneath the interface shows that although the presence of an additional liquid layer stabilizes the oscillations of the submerged jet significantly, the amount of kinetic energy, enstrophy, and velocity fluctuations concentrated in the proximity of the interface is higher when the oil layer is present. In addition, we analyze the energy distribution across the eigenmodes of a proper orthogonal distribution and the distribution of strain and vortex dominated regions. As the main objective of this study, these high-resolution time-resolved experimental data provide a validation platform for the development of new models in the context of the volume of fluid-based large eddy simulation of turbulent two-phase flows.

scholarly journals Fabrication and Characterization of Nylon 66/PAN Nanofibrous Film Used as Separator of Lithium-Ion Battery

Polymers ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 1984
Author(s):  
Yu-Hsun Nien ◽  
Chih-Ning Chang ◽  
Pao-Lin Chuang ◽  
Chun-Han Hsu ◽  
Jun-Lun Liao ◽  
...  
Keyword(s):  
Lithium Ion Battery ◽  
Lithium Batteries ◽  
Lithium Battery ◽  
Coulombic Efficiency ◽  
Electronic Devices ◽  
Lithium Ion ◽  
Nylon 66 ◽  
Excellent Electrochemical Performance ◽  
Fabrication And Characterization

In recent years, portable electronic devices have flourished, and the safety of lithium batteries has received increasing attention. In this study, nanofibers were prepared by electrospinning using different ratios of nylon 66/polyacrylonitrile (PAN), and their properties were studied and compared with commercial PP separators. The experimental results show that the addition of PAN in nylon 66/PAN nanofibrous film used as separator of lithium-ion battery can enhance the porosity up to 85%. There is also no significant shrinkage in the shrinkage test, and the thermal dimensional stability is good. When the Li/LiFePO4 lithium battery is prepared by nylon 66/PAN nanofibrous film used as separator, the capacitor can be maintained at 140 mAhg−1 after 20 cycles at 0.1 C, and the coulombic efficiency is still maintained at 99%, which has excellent electrochemical performance.

Sign in / Sign up

Export Citation Format

Share Document