A Study of Electricity Generating from Small Multi-Blade Wind Turbine for a Household

2013 ◽  
Vol 291-294 ◽  
pp. 435-438
Author(s):  
Yuttachai Keawsuntia
Keyword(s):  
Wind Tunnel ◽  
Wind Turbine ◽  
Electric Power ◽  
Wind Velocity ◽  
Simulation Program ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Alternative Technology ◽  
Tip Speed Ratio ◽  
Program Show

A small multi-blade wind turbine is an alternative technology in order to electricity generating for use in a household because of the construction is cheap. From the study, the performance calculations by simulation program show that a number of blade at 12 blades is the optimum value for applying to this wind turbine that give maximum power coefficient of 0.29 at a tip speed ratio of 1.2. The results from the test run of wind rotor connected with generator in the wind tunnel at a wind velocity of 2 m/s, 3 m/s and 4 m/s, the system give the electric power of 2.5 W, 4.25 W and 4.49 W respectively.

Experimental Study of a Pinwheel-Type Wind Turbine

2003 ◽  
Vol 27 (3) ◽  
pp. 227-236 ◽  
Author(s):  
Yasuyuki Nemoto ◽  
Izumi Ushiyama
Keyword(s):  
Experimental Study ◽  
Wind Tunnel ◽  
Wind Turbine ◽  
Optimum Design ◽  
Architectural Design ◽  
Frontal Area ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Tip Speed Ratio ◽  
Torque Coefficient

Pinwheels have been familiar as toys for hundreds of years. Not only do they have an attractive appearance, they can also be fabricated from just one piece of plate. Application is possible, e.g. for education and architectural design. The purpose of this paper is to clarify the characteristics and to determine the optimum design configuration of pinwheel type wind turbines. The authors fabricated the test rotors with various shapes and carried out the experiment in a wind tunnel. As a result, the following facts were obtained: (1) Power coefficient with the traditional 4 blades has, CPmax = 0.17 at λ = 2. (2) High tip speed is obtained by cutting the frontal area of pinwheel. Tip speed ratio at no load can be easily changed from λ = 3 to 6 by changing the cutting area. Maximum power coefficient CPmax = 0.22 was obtained at tip speed ratio λ = 3.5. (3) Increased torque is obtained by cutting the edge area of the pinwheel. Tip speed ratio at no load can be easily changed from λ = 2 to 3, and torque coefficient can be easily changed from CQmax = 0.15 to 0.25, by changing the cut area.

scholarly journals Performance assessment and optimization of a helical Savonius wind turbine by modifying the Bach’s section

2021 ◽  
Vol 3 (8) ◽  
Author(s):  
M. Niyat Zadeh ◽  
M. Pourfallah ◽  
S. Safari Sabet ◽  
M. Gholinia ◽  
S. Mouloodi ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Performance Assessment ◽  
Turbulent Flows ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Tip Speed Ratio ◽  
Basic Model ◽  
Turbine Performance ◽  
Primary Model ◽  
Savonius Wind Turbine

AbstractIn this paper, we attempted to measure the effect of Bach’s section, which presents a high-power coefficient in the standard Savonius model, on the performance of the helical Savonius wind turbine, by observing the parameters affecting turbine performance. Assessment methods based on the tip speed ratio, torque variation, flow field characterizations, and the power coefficient are performed. The present issue was stimulated using the turbulence model SST (k- ω) at 6, 8, and 10 m/s wind flow velocities via COMSOL software. Numerical simulation was validated employing previous articles. Outputs demonstrate that Bach-primary and Bach-developed wind turbine models have less flow separation at the spoke-end than the simple helical Savonius model, ultimately improving wind turbines’ total performance and reducing spoke-dynamic loads. Compared with the basic model, the Bach-developed model shows an 18.3% performance improvement in the maximum power coefficient. Bach’s primary model also offers a 12.4% increase in power production than the initial model’s best performance. Furthermore, the results indicate that changing the geometric parameters of the Bach model at high velocities (in turbulent flows) does not significantly affect improving performance.

Numerical Research on the Characteristics of Lift-Drag Type Vertical Axis Wind Turbine

2012 ◽  
Vol 189 ◽  
pp. 448-452
Author(s):  
Yan Jun Chen ◽  
Guo Qing Wu ◽  
Yang Cao ◽  
Dian Gui Huang ◽  
Qin Wang ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Chord Length ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Tip Speed Ratio ◽  
Middle Range ◽  
Parabolic Form ◽  
Cfd Method

Numerical studies are conducted to research the performance of a kind of lift-drag type vertical axis wind turbine (VAWT) affected by solidity with the CFD method. Moving mesh technique is used to construct the model. The Spalart-Allmaras one equation turbulent model and the implicit coupled algorithm based on pressure are selected to solve the transient equations. In this research, how the tip speed ratio and the solidity of blade affect the power coefficient (Cp) of the small H-VAWT is analyzed. The results indicate that Cp curves exhibit approximate parabolic form with its maximum in the middle range of tip speed ratio. The two-blade wind turbine has the lowest Cp while the three-blade one is more powerful and the four-blade one brings the highest power. With the certain number of blades, there is a best chord length, and too long or too short chord length may reduce the Cp.

Experimental Study of Vertical Axis Wind Turbine with Wind Speed Self-Adapting

2012 ◽  
Vol 215-216 ◽  
pp. 1323-1326
Author(s):  
Ming Wei Xu ◽  
Jian Jun Qu ◽  
Han Zhang
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Velocity ◽  
Vertical Axis ◽  
Maximum Power ◽  
The Self ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Opening And Closing

A small vertical axis wind turbine with wind speed self-adapting was designed. The diameter and height of the turbine were both 0.7m. It featured that the blades were composed of movable and fixed blades, and the opening and closing of the movable blades realized the wind speed self-adapting. Aerodynamic performance of this new kind turbine was tested in a simple wind tunnel. Then the self-starting and power coefficient of the turbine were studied. The turbine with load could reliably self-start and operate stably even when the wind velocity was only 3.6 m/s. When the wind velocity was 8 m/s and the load torque was 0.1Nm, the movable blades no longer opened and the wind turbine realized the conversion from drag mode to lift mode. With the increase of wind speed, the maximum power coefficient of the turbine also improves gradually. Under 8 m/s wind speed, the maximum power coefficient of the turbine reaches to 12.26%. The experimental results showed that the new turbine not only improved the self-starting ability of the lift-style turbine, but also had a higher power coefficient in low tip speed ratio.

scholarly journals Attempt to quantify the impact of seasonal air density variation on operating tip-speed ratio of small wind turbines

2021 ◽  
Vol 2090 (1) ◽  
pp. 012144
Author(s):  
Hiroki Suzuki ◽  
Yutaka Hasegawa ◽  
O.D. Afolabi Oluwasola ◽  
Shinsuke Mochizuki
Keyword(s):  
Wind Turbine ◽  
Wind Velocity ◽  
Governing Equation ◽  
Rotational Speed ◽  
Speed Ratio ◽  
Tip Speed Ratio ◽  
Air Density ◽  
Small Wind Turbines ◽  
The Impact ◽  
Aerodynamic Torque

Abstract This study presents the impact of seasonal variation in air density on the operating tip-speed ratio of small wind turbines. The air density, which varies depending on the temperature, atmospheric pressure, and relative humidity, has an annual amplitude of about 5% in Tokyo, Japan. This study quantified this impact using the rotational speed equation of motion in a small wind turbine informed by previous work. This governing equation has been simplified by expanding the aerodynamic torque coefficient profile for a wind turbine rotor to the tip-speed ratio. Furthermore, this governing equation is simplified by using nondimensional forms of the air density, inflow wind velocity, and rotational speed with their characteristic values. In this study, the generator’s load is set to be constant based on a previous analysis of a small wind turbine. By considering the equilibrium between the aerodynamic torque and the load torque of the governing equation at the optimum tip-speed ratio, the impact of the variation in the air density on the operating tip-speed ratio was expressed using a simple mathematical form. As shown in this derived form, the operating tip-speed ratio was found to be less sensitive to a variation in air density than that in inflow wind velocity.

A Study on Water Pumping by Using a Small Multi-Blades Windmill for Used in a Remote Area

2013 ◽  
Vol 724-725 ◽  
pp. 527-530
Author(s):  
Yuttachai Keawsuntia
Keyword(s):  
Wind Velocity ◽  
Life Time ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Pump System ◽  
Tip Speed Ratio ◽  
Water Pumping ◽  
Overall Efficiency ◽  
Water Base ◽  
Rotor Model

The objective of this research is to study the small multi-blades windmill for water pumping by using a studying performance of windmill which has a curvature plate ratio of 0.07 and determine overall efficiency and evaluate economic of the system. The results from the test run of windmill rotor model in the wind tunnel at a wind velocity of 3 m/s, the windmill give maximum power coefficient of 0.296 at a tip speed ratio of 1.18. The results from the test run of the windmill-pump system at 2 m head have an overall efficiency of 0.239 at the wind velocity of 1.2 m/s. The output of 2.38 L/min, which implies a rate of return for water pumping at 0.038 USD per cubicmetre of water base on 10 year-life time of windmill.

An Experimental Study of the Aerodynamics and Performance of a Vertical Axis Wind Turbine in a Confined and Unconfined Environment

2015 ◽  
Vol 137 (5) ◽  
Author(s):  
Vincenzo Dossena ◽  
Giacomo Persico ◽  
Berardo Paradiso ◽  
Lorenzo Battisti ◽  
Sergio Dell'Anna ◽  
...  
Keyword(s):  
Experimental Study ◽  
Wind Tunnel ◽  
Wind Turbine ◽  
Vertical Axis ◽  
Tip Vortex ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Tip Speed Ratio ◽  
And Performance ◽  
Power Curves

This paper presents the results of a wide experimental study on an H-type vertical axis wind turbine (VAWT) carried out at the Politecnico di Milano. The experiments were carried out in a large-scale wind tunnel, where wind turbines for microgeneration can be tested in real-scale conditions. Integral torque and thrust measurements were performed, as well as detailed aerodynamic measurements to characterize the flow field generated by the turbine downstream of the rotor. The machine was tested in both a confined (closed chamber) and unconfined (open chamber) environment, to highlight the effect of wind tunnel blockage on the aerodynamics and performance of the VAWT under investigation. The experimental results, compared with the blockage correlations presently available, suggest that specific correction models should be developed for VAWTs. The experimental thrust and power curves of the turbine, derived from integral measurements, exhibit the expected trends with a peak power coefficient of about 0.28 at tip-speed ratio equal to 2.5. Flow measurements, performed in three conditions for tip speed ratio equal to 1.5, 2.5, and 3.5, show the fully three-dimensional character of the wake, especially in the tip region where a nonsymmetrical wake and tip vortex are found. The unsteady evolution of the velocity and turbulence fields further highlights the effect of aerodynamic loading on the wake unsteadiness, showing the time-dependent nature of the tip vortex and the onset of dynamic stall for tip speed ratio lower than 2.

Study on Performance and Flow Condition of a Cross-Flow Wind Turbine With a Symmetrical Casing

2011 ◽  
Vol 133 (5) ◽  
Author(s):  
Junichiro Fukutomi ◽  
Toru Shigemitsu ◽  
Hiroki Daito
Keyword(s):  
Wind Turbine ◽  
Rotational Speed ◽  
Flow Condition ◽  
Cross Flow ◽  
Low Noise ◽  
Maximum Power ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Tip Speed Ratio ◽  
The Cross

A cross-flow wind turbine has a high torque coefficient at a low tip speed ratio. Therefore, it is a good candidate for use as a self-starting turbine. Furthermore, it has low noise and excellent stability; therefore, it has attracted attention from the viewpoint of applications as a small wind turbine for an urban district. However, its maximum power coefficient is extremely low (10%) as compared to that of other small wind turbines. Prevailing winds in two directions often blow in urban and coastal regions. Therefore, in order to improve the performance and the flow condition of the cross-flow rotor, a casing suitable for this sort of prevailing wind conditions is designed in this research and the effect of the casing is investigated by experimental and numerical analysis. In the experiment, a wind tunnel with a square discharge is used and main flow velocity is set as 20 m/s. A torque meter, a rotational speed pickup, and a motor are assembled with the same axis as the test wind turbine and the tip speed ratio is changeable by a rotational speed controller. The casing is set around the cross-flow rotor and flow distribution at the rotor inlet and the outlet is measured by a one-hole pitot tube. The maximum power coefficient is obtained as Cpmax = 0.19 with the casing, however Cpmax = 0.098 without the casing. It is clear that the inlet and the outlet flow condition is improved by the casing. In the present paper, in order to improve the performance of a cross-flow wind turbine, a symmetrical casing suitable for prevailing winds in two directions is proposed. Then, the performance and the internal flow condition of the cross-flow wind turbine with the casing are clarified. Furthermore, the influence of the symmetrical casing on performance is discussed and the relation between the flow condition and performance is considered.

scholarly journals Numerical simulation and experimental study of blade pitch effect on Darrieus straight-bladed wind turbine with high solidity: A case study under realistic conditions

2020 ◽  
Author(s):  
Milad Babadi Soultanzadeh ◽  
Alireza Moradi
Keyword(s):  
Wind Turbine ◽  
Numerical Method ◽  
Pitch Angle ◽  
Numerical Results ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Regulation System ◽  
Lower Velocity ◽  
Realistic Condition ◽  
Tip Speed Ratio

Abstract Numerical and experimental studies were performed to examined the influence of pitch angle on the aerodynamic performance of a small Darrieus straight blade vertical axis wind turbine with high solidity and pitch regulation system under a realistic condition. By comparing experimental and numerical results, numerical results were validated. The power coefficient was measured and calculated at different tip speed ratios and for two pitch angles 0 and 5. The results revealed that 5 degrees increase in the pitch angle led to 25% elevation in the maximum value of the power coefficient (performance coefficient). Also, the numerical results showed higher accuracy at lower tip speed ratios for both pitch angles. After numerical method validation, numerical method employed to calculate the coefficient of performance and coefficient of torque function of Azimuth position as well as the flow field in the rotor affected zone and lateral distance. According to the numerical results, vorticity generation increased by the rise in the pitch angle at a constant tip speed ratio; the maximum performance coefficient occurred at a lower tip speed ratio with elevation in the pitch angle; finally, the increment in the pitch angle led to lower velocity profile in lateral distances of the rotor.

Aerodynamic Design and Wind Tunnel Tests of Small-scale Horizontal-axis Wind Turbines for Low Tip Speed Ratio Applications

2022 ◽  
pp. 1-34
Author(s):  
Ojing Siram ◽  
Neha Kesharwani ◽  
Niranjan Sahoo ◽  
Ujjwal K. Saha
Keyword(s):  
Wind Tunnel ◽  
Wind Turbines ◽  
Pitch Angle ◽  
Horizontal Axis ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Small Scale ◽  
Wind Tunnel Tests ◽  
Tip Speed Ratio ◽  
Horizontal Axis Wind Turbines

Abstract In recent times, the application of small-scale horizontal axis wind turbines (SHAWTs) has drawn interest in certain areas where the energy demand is minimal. These turbines, operating mostly at low Reynolds number (Re) and low tip speed ratio (λ) applications, can be used as stand-alone systems. The present study aims at the design, development, and testing of a series of SHAWT models. On the basis of aerodynamic characteristics, four SHAWT models viz., M1, M2, M3, and M4 composed of E216, SG6043, NACA63415, and NACA0012 airfoils, respectively have been developed. Initially, the rotors are designed through blade element momentum theory (BEMT), and their power coefficient have been evaluated. Thence, the developed rotors are tested in a low-speed wind tunnel to find their rotational frequency, power and power coefficient at design and off-design conditions. From BEMT analysis, M1 shows a maximum power coefficient (Cpmax) of 0.37 at λ = 2.5. The subsequent wind tunnel tests on M1, M2, M3, and M4 at 9 m/s show the Cpmax values to be 0.34, 0.30, 0.28, and 0.156, respectively. Thus, from the experiments, the M1 rotor is found to be favourable than the other three rotors, and its Cpmax value is found to be about 92% of BEMT prediction. Further, the effect of pitch angle (θp) on Cp of the model rotors is also examined, where M1 is found to produce a satisfactory performance within ±5° from the design pitch angle (θp, design).

Sign in / Sign up

Export Citation Format

Share Document