Advances in Synthesis and Properties of Poly(ε-caprolactone)/Carbon Nanocomposites

2013 ◽  
Vol 320 ◽  
pp. 441-445
Author(s):  
Lian Liu ◽  
Teng Yu ◽  
Pei Wang ◽  
Guang Shuo Wang ◽  
Zhi Yong Wei
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Graphene Oxide ◽  
Thermal Properties ◽  
Chemical Modification ◽  
Crystallization Behavior ◽  
Polymeric Materials ◽  
Carbon Nanocomposites

Recently, Graphene oxide (GO), carbon nanotubes (CNTs) and fullerenes (C60) have attracted enormous interests because of their extraordinary properties, and they can improve various kinds of properties of polymeric materials. The latest achievements on investigating applications and properties including mechanical properties, thermal properties, crystallization behavior and bioactivity of poly (ε-caprolactone). (PCL)/GO, PCL/CNTs and PCL/ C60 nanocomposites obtained in the last five years were summarized in this paper. The relationships between the properties of nanocomposites and the loading, dispersion chemical modification of GO, CNTs and C60 were also discussed.

Effect of Functionalized MWCNTs with Surfactant and Coupling Agent on Properties of LDPE/POE Blends

2011 ◽  
Vol 43 (6) ◽  
pp. 543-558 ◽  
Author(s):  
Z. Chen ◽  
S. Chen ◽  
J. Zhang
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Tensile Strength ◽  
Multiwalled Carbon Nanotubes ◽  
Crystallization Behavior ◽  
Low Density Polyethylene ◽  
Favorable Effect ◽  
Low Density ◽  
Multiwalled Carbon ◽  
Polyolefin Elastomer

The surfactant, sodium dodecylbenzenesulfonate (NaDDBS) and coupling agents, γ-aminopropyltriethoxy sliane (KH550) and isopropyl dioleic(dioctylphosphate) titanate (NDZ101) were used to treat multiwalled carbon nanotubes in this work. The effects of surface modification of multiwalled carbon nanotubes on crystallization behavior, mechanical properties, and electrical properties of low density polyethylene/polyolefin elastomer/multiwalled carbon nanotubes composites were studied. The results showed that NaDDBS, KH550, and NDZ101 had a favorable effect of improving the dispersion of multiwalled carbon nanotubes, but it cannot improve the interfacial interactionbetween multiwalled carbon nanotubes and the matrix. The improvement in dispersion favored the crystallization behavior and mechanical properties. Modified multiwalled carbon nanotubes had a better acceleration nucleation effect than raw multiwalled carbon nanotubes on low density polyethylene/polyolefin elastomer blends at low content (≤1 wt%). The tensile strength of low density polyethylene/polyolefin elastomer/multiwalled carbon nanotubes composites with modified multiwalled carbon nanotubes increased with lower multiwalled carbon nanotubes content (≤1 wt%), and KH550 and NDZ101 led low density polyethylene/polyolefin elastomer/multiwalled carbon nanotubes composites to possess a higher tensile strength than that of NaDDBS with 1 wt% content. NaDDBS, KH550, and NDZ101 had a minor influence on the dielectric properties of the composites and even caused a decrease in the dielectric loss of composites with 10 wt% multiwalled carbon nanotubes content.

scholarly journals Polymethyl Methacrylate-Based Bone Cements Containing Carbon Nanotubes and Graphene Oxide: An Overview of Physical, Mechanical, and Biological Properties

Polymers ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1469 ◽  
Author(s):  
Sanaz Soleymani Eil Bakhtiari ◽  
Hamid Reza Bakhsheshi-Rad ◽  
Saeed Karbasi ◽  
Mohamadreza Tavakoli ◽  
Mahmood Razzaghi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Graphene Oxide ◽  
Polymethyl Methacrylate ◽  
Biological Properties ◽  
Bone Diseases ◽  
Bone Cements ◽  
Bone Fixation ◽  
Primary Bone ◽  
Carbon Based

Every year, millions of people in the world get bone diseases and need orthopedic surgery as one of the most important treatments. Owing to their superior properties, such as acceptable biocompatibility and providing great primary bone fixation with the implant, polymethyl methacrylate (PMMA)-based bone cements (BCs) are among the essential materials as fixation implants in different orthopedic and trauma surgeries. On the other hand, these BCs have some disadvantages, including Lack of bone formation and bioactivity, and low mechanical properties, which can lead to bone cement (BC) failure. Hence, plenty of studies have been concentrating on eliminating BC failures by using different kinds of ceramics and polymers for reinforcement and also by producing composite materials. This review article aims to evaluate mechanical properties, self-setting characteristics, biocompatibility, and bioactivity of the PMMA-based BCs composites containing carbon nanotubes (CNTs), graphene oxide (GO), and carbon-based compounds. In the present study, we compared the effects of CNTs and GO as reinforcement agents in the PMMA-based BCs. Upcoming study on the PMMA-based BCs should concentrate on trialing combinations of these carbon-based reinforcing agents as this might improve beneficial characteristics.

scholarly journals Fabrication and Characterization of Polylactic Acid Electrospun Scaffolds Modified with Multi-Walled Carbon Nanotubes and Hydroxyapatite Nanoparticles

Biomimetics ◽  
2020 ◽  
Vol 5 (3) ◽  
pp. 43
Author(s):  
Athanasios Kotrotsos ◽  
Prokopis Yiallouros ◽  
Vassilis Kostopoulos
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Polylactic Acid ◽  
Physical And Mechanical Properties ◽  
Polymeric Materials ◽  
Cost Effective ◽  
Electrospinning Process ◽  
Wide Range ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

The solution electrospinning process (SEP) is a cost-effective technique in which a wide range of polymeric materials can be electrospun. Electrospun materials can also be easily modified during the solution preparation process (prior SEP). Based on this, the aim of the current work is the fabrication and nanomodification of scaffolds using SEP, and the investigation of their porosity and physical and mechanical properties. In this study, polylactic acid (PLA) was selected for scaffold fabrication, and further modified with multi-walled carbon nanotubes (MWCNTs) and hydroxyapatite (HAP) nanoparticles. After fabrication, porosity calculation and physical and mechanical characterization for all scaffold types were conducted. More precisely, the morphology of the fibers (in terms of fiber diameter), the surface properties (in terms of contact angle) and the mechanical properties under the tensile mode of the fabricated scaffolds have been investigated and further compared against pristine PLA scaffolds (without nanofillers). Finally, the scaffold with the optimal properties was proposed as the candidate material for potential future cell culturing.

Crystallization behavior and mechanical properties of poly(lactic acid) complex fiber toughened by carbon nanotube nanocapsules

2017 ◽  
Vol 88 (14) ◽  
pp. 1616-1627 ◽  
Author(s):  
Shu-qiang Liu ◽  
Gai-hong Wu ◽  
Yun-chao Xiao ◽  
Hong-xia Guo ◽  
Fen-juan Shao
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Lactic Acid ◽  
Thermal Properties ◽  
Carbon Nanotube ◽  
Crystallization Behavior ◽  
Poly Lactic Acid ◽  
Acid Complex ◽  
Main Obstacle ◽  
Industrial Areas

Poly(lactic acid) (PLA) fiber, owing to its biocompatibility and biodegradability, could be widely used in many related industrial areas. However, high brittleness has been the main obstacle to expanding its applications. So in this paper, carbon nanotube (CNT) nanocapsules were designed to toughen PLA and further reported their effect on the crystallization behavior and mechanical properties of PLA complex fiber. These designed CNT nanocapsules successfully solved the agglomeration of CNTs within the PLA matrix as well as the compatibility issue. In addition, the morphological, mechanical, optical and thermal properties of PLA complex fibers were also studied. The addition of CNT nanocapsules obviously improved the crystallization behavior of PLA fiber. Furthermore, compared with pure PLA, the tensile strength of PLA complex fiber was enhanced by 30.62% and the elongation by 32.2%, so the designed CNT nanocapsules could be used as a toughener for PLA fiber. This research benefits the extension of PLA applications where toughness is an important factor.

Thermal Properties and Fire Performance of Woven Glass Fibre Reinforced Nylon 6 Nano-Composites with Carbon Nanotubes

2008 ◽  
Vol 32 ◽  
pp. 9-12
Author(s):  
Shirley Zhiqi Shen ◽  
Stuart Bateman ◽  
Qiang Yuan ◽  
Mel Dell'Olio ◽  
Januar Gotama ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Thermal Properties ◽  
Ignition Time ◽  
Nylon 6 ◽  
Nano Composites ◽  
Fire Performance ◽  
Thermal Stabilities ◽  
Glass Fibre Reinforced

This paper presents the effects of incorporating carbon nanotubes (CNT) into nylon 6 on thermal properties and fire performance of woven glass reinforced CNT/nylon 6 nanocomposite laminates. Incorporation of CNT in nylon 6 improved the thermal stabilities, thermal conductivity and fire performance of laminates without compromising their mechanical properties. The thermal conductivity of laminates with 2 wt% CNT increased up to 42% compared to that without CNT. The ignition time and peak HRR time was delayed approx. 31% and 118%, respectively, in laminates with 4 wt% CNT in nylon 6 over that without CNT.

Sign in / Sign up

Export Citation Format

Share Document