Wind Tunnel Studyon Vortex-Induced Vibration Characteristics of Long-Span Suspension Bridges with Single Cable Plane

2014 ◽  
Vol 633-634 ◽  
pp. 1263-1266
Author(s):  
Huang Yu
Keyword(s):  
Wind Tunnel ◽  
Suspension Bridge ◽  
Wind Tunnel Experiment ◽  
Vibration Characteristics ◽  
Torsional Stiffness ◽  
Suspension Bridges ◽  
Vortex Induced Vibration ◽  
Long Span Bridges ◽  
Wind Speeds ◽  
Long Span

For modern long-span bridges, both the optimization of aerodynamic shape and the increase of torsional stiffness according to the result of the wind tunnel experiment could avoid the flutter instability.Vortex-inducedvibration with relatively large amplitude happens easily at low wind speeds. In this paper, based on wind tunnel experiment, by studying on the vortex-induced vibration characteristics of a long-span suspension bridge with single cable plane, aerodynamic measures for easing the vortex-induced vibration are given.

Experimental and numerical study on vortex-induced vibration of a truss girder with two decks

2020 ◽  
pp. 136943322096902
Author(s):  
Chen Fang ◽  
Ruijie Hu ◽  
Haojun Tang ◽  
Yongle Li ◽  
Zewen Wang
Keyword(s):  
Large Scale ◽  
Numerical Study ◽  
Suspension Bridge ◽  
Wake Flow ◽  
Box Girders ◽  
Vortex Induced Vibration ◽  
Long Span Bridges ◽  
Wind Speeds ◽  
Long Span ◽  
Lock In

Vortex-induced vibration (VIV) depends on aerodynamic shapes of bridge girders, which should be treated carefully in the design of long-span bridges. This paper studies the VIV performance of a suspension bridge with the truss girder which contains two separated decks. Although truss girders generally show better VIV performance than box girders, significant vibrations of this type of girders occurred in the wind tunnel tests based on a large-scale sectional model. Several lock-in regions with the same vibration frequency were observed, corresponding to different shedding vortices. Computational fluid dynamics (CFD) simulations were carried out, and monitoring points were set behind different components to study the characteristics of the shed vortices. As the truss girder consists of many members, the results show that various vortices with different dominant frequencies are formed in the wake flow. The vertical VIV of the bridge is probably driven by the vortices behind or above the upper deck, which is related to the guardrails. The torsional VIV of the bridge is probably driven by the vortices behind or below the lower deck, which is related to the service road at lower wind speeds while may be related the vertical stabilizers at higher wind speeds.

Flutter mitigation of a superlong-span suspension bridge with a double-deck truss girder through wind tunnel tests

2020 ◽  
pp. 107754632094615
Author(s):  
Yanguo Sun ◽  
Yongfu Lei ◽  
Ming Li ◽  
Haili Liao ◽  
Mingshui Li
Keyword(s):  
Wind Tunnel ◽  
Damping Ratio ◽  
Suspension Bridge ◽  
Wind Tunnel Tests ◽  
Long Span Bridges ◽  
Long Span ◽  
Upper Deck ◽  
Torsional Damping ◽  
And Control ◽  
Wind Induced Vibration

As flutter is a very dangerous wind-induced vibration phenomenon, the mitigation and control of flutter are crucial for the design of long-span bridges. In the present study, via a large number of section model wind tunnel tests, the flutter performance of a superlong-span suspension bridge with a double-deck truss girder was studied, and a series of aerodynamic and structural measures were used to mitigate and control its flutter instability. The results show that soft flutter characterized by a lack of an evident divergent point occurred for the double-deck truss girder. Upper central stabilizers on the upper deck, lower stabilizers below the lower deck, and horizontal flaps installed beside the bottoms of the sidewalks are all effective in suppressing flutter for this kind of truss girder. By combining the structural design with aerodynamic optimizations, a redesigned truss girder with widened upper carriers and sidewalks, and double lower stabilizers combined with the inspection vehicle rails is identified as the optimal flutter mitigation scheme. It was also found that the critical flutter wind speed increases with the torsional damping ratio, indicating that the dampers may be efficient in controlling soft flutter characterized by single-degree-of-freedom torsional vibration. This study aims to provide a useful reference and guidance for the flutter design optimization of long-span bridges with double-deck truss girders.

Wind tunnel experiment of long-span suspension bridge using 3D models

1991 ◽  
Vol 1991 (46) ◽  
pp. 1-17 ◽  
Author(s):  
Yozo FUJINO ◽  
Masami IWAMOTO ◽  
Manabu ITO ◽  
Yuichi HIKAMI ◽  
Katsuaki TAKEDA ◽  
...  
Keyword(s):  
Wind Tunnel ◽  
Suspension Bridge ◽  
3D Models ◽  
Wind Tunnel Experiment ◽  
Long Span

Research on the Aerodynamic Measures Impact on Flutter Stability of Steel Truss Suspension Bridge

2013 ◽  
Vol 791-793 ◽  
pp. 378-381
Author(s):  
Hua Bai ◽  
Sen Hua Huang
Keyword(s):  
Wind Speed ◽  
Wind Tunnel ◽  
Suspension Bridge ◽  
Wind Tunnel Experiment ◽  
Attack Angle ◽  
Torsional Stiffness ◽  
Critical Wind Speed ◽  
Guide Plate ◽  
Steel Truss ◽  
Better Than

The flutter stability of the steel truss suspension bridge is hard to reach the requirement of the wind resisting stability when lacks the torsional stiffness. This paper discusses the influence of aerodynamic measure combination, such as central stabilizer, air director enclosed anti-collision bar and so on, towards the flutter stability of steel truss through the wind tunnel experiment of the bridge of Liu Jia gorge. The result shows: the effect of using both the upper and lower stabilized plate is better than separated used it. when sectionalized dispose upper stabilized plate, the flutter critical wind speed of attack angle will decrease rapidly. Outlaying the horizontal guide plate is better than internally installed; The flutter stability of different attack angle tend to be balanced by widening the horizontal guide plate. The anti-collision bar can be functionalized as the central stabilizer by heightening and enclosing, and effectively increase the critical wind speed of different attack angles of the high truss suspension bridge.

Study on Static Wind Loading Coefficients of Suspension Bridge Based on CFD Simulation and Wind Tunnel Test

2011 ◽  
Vol 66-68 ◽  
pp. 334-339
Author(s):  
Mei Yu ◽  
Hai Li Liao ◽  
Ming Shui Li ◽  
Cun Ming Ma ◽  
Nan Luo ◽  
...  
Keyword(s):  
Wind Tunnel ◽  
Cfd Simulation ◽  
Wind Tunnel Test ◽  
Suspension Bridge ◽  
Wind Load ◽  
Dynamics Simulation ◽  
Wind Loading ◽  
Suspension Bridges ◽  
Long Span ◽  
Section Model

Long-span suspension bridges, due to their flexibility and lightness, are much prone to the wind loads, aerodynamics performance has become an important aspect of the design of long-span suspension bridges. In this study, the static wind load acting on the suspension bridge during erection has been investigated through wind tunnel test and numerical analysis. The wind tunnel test was performed using a 1:50 scale section model of the bridge, the static wind load acting on the section model was measured with varying attack angles. Numerical method used here was computational fluid dynamics simulation, a two-dimensional model is adopted in the first stage of the analysis, then the SIMPLE algorithm was employed to solve the governing equations. The analytical results were compared with the wind tunnel test data, it was shown from the study that the results of CFD simulation was good agreement with that of the wind tunnel test.

Mechanics Characteristics Study for Cable-Stayed-Suspension Bridges

2011 ◽  
Vol 243-249 ◽  
pp. 1817-1825
Author(s):  
Jing Qiu ◽  
Rui Li Shen ◽  
Huai Guang Li
Keyword(s):  
Finite Element ◽  
Suspension Bridge ◽  
Simulation Method ◽  
Suspension Bridges ◽  
Preliminary Design ◽  
Structural System ◽  
Long Span Bridges ◽  
Long Span ◽  
Element Simulation ◽  
Mechanics Characteristics

As a composite structure, the cable-stayed-suspension bridge is characterized by relatively new structure, great overall stiffness and long-span capacity, which has been proposed for the design of some extra long-span bridges. In order to research further into the mechanics characteristics of this type of structural system, the proposed preliminary design of a cable-stayed-suspension bridge with a main span of 1800m is analyzed by means of finite element simulation method. The advantages on overall stiffness in the cable-stayed-suspension bridge are summarized in comparison with the three-span suspension bridge and the single-span suspension bridge. Then, the reasons for the fatigue of the longest suspension cables in the cable-stayed-suspension bridge are also discussed in this paper.

Experimental Study of the Nonlinear Torsional Flutter of a Long-Span Suspension Bridge with a Double-Deck Truss Girder

2021 ◽  
pp. 2150102
Author(s):  
Ming Li ◽  
Yanguo Sun ◽  
Yongfu Lei ◽  
Haili Liao ◽  
Mingshui Li
Keyword(s):  
Wind Tunnel ◽  
Model Test ◽  
Wind Tunnel Test ◽  
Suspension Bridge ◽  
Suspension Bridges ◽  
Nonlinear Flutter ◽  
Long Span ◽  
Aeroelastic Model ◽  
Flutter Analysis ◽  
Section Model

The purpose of this study is to investigate the nonlinear torsional flutter of a long-span suspension bridge with a double-deck truss girder. First, the characteristics of nonlinear flutter are studied using the section model in the wind tunnel test. Different aerodynamic measures, e.g. upper and lower stabilizers and horizontal flaps, are applied to improve the flutter performance of the double-deck truss girder. Then, the full bridge aeroelastic model is tested in the wind tunnel to further examine the flutter performance of the bridge with the optimal truss girder. Finally, three-dimensional (3D) flutter analysis is performed to study the static wind-induced effects on the nonlinear flutter of the long-span suspension bridge. The results show that single-degree-of-freedom torsional limit cycle oscillations occur at large amplitudes for the double-deck truss section at the attack angles of [Formula: see text] and [Formula: see text]. The upper and lower stabilizers installed on the upper and lower decks, respectively, and the flaps installed near the bottoms of the sidewalks can all effectively alleviate the torsional flutter responses. Meanwhile, it is found that the torsional flutter responses of the truss girder in the aeroelastic model test are much smaller than those in the section model test. The 3D flutter analysis demonstrates that the large discrepancies between the flutter responses of the two model experiments can be attributed to the additional attack angle caused by the static wind-induced displacements. This finding highlights the importance and necessity of considering the static wind-induced effects in the flutter design of long-span suspension bridges.

A predictive critical flutter wind speed modeling for long-span bridges

2020 ◽  
Vol 23 (9) ◽  
pp. 1823-1837
Author(s):  
Kun Lin ◽  
Minghai Wei ◽  
Hongjun Liu ◽  
Huafeng Wang
Keyword(s):  
Wind Speed ◽  
Wind Tunnel ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Wind Tunnel Tests ◽  
Long Span Bridges ◽  
Wind Speeds ◽  
Long Span ◽  
Aerodynamic Model ◽  
Proposed Model

In this article, a two-dimensional Lighthill aerodynamic model is first extended to three-dimensional space, and then combined with the larger Von Karman plate deformation theory, a model for predicting the critical flutter wind speeds of long-span bridges in the primary design is proposed. The predictions of the presented model are compared to the results of wind tunnel tests for five long-span bridges with different main girder section forms. After that, based on the proposed model, the effects of width to span ratio and thickness to span ratio on the critical flutter wind speeds of long-span bridges are investigated. The results show that the differences between the proposed model and wind tunnel tests are only 7%–14%. Therefore, the presented model can assess the flutter wind speed in preliminary design stages of a bridge. The results also reveal that width to span ratios between 1/30 and 1/10 and thickness to span ratios between 1/300 and 1/100 are optimal for long-span bridges.

Dynamic Characteristics Analysis and Parametric Study of a Super-Long-Span Triple-Tower Suspension Bridge

2012 ◽  
Vol 256-259 ◽  
pp. 1627-1634 ◽  
Author(s):  
Jia Wen Zhang ◽  
Wen Hua Guo ◽  
Chao Qun Xiang
Keyword(s):  
Dynamic Characteristics ◽  
Suspension Bridge ◽  
Torsional Stiffness ◽  
Mode Shapes ◽  
Suspension Bridges ◽  
Box Girder ◽  
Long Span ◽  
Steel Box Girder ◽  
Elastic Restraints ◽  
Central Buckle

Based on the Taizhou Yangtze River Bridge, a 3D finite element model is developed to establish its deformed equlibrium configuration due to dead loading. Strating from deformed configuration,a modal analysis is performed to provide the frequencies and mode shapes. The study focuses on the effects of the vertical, lateral and torsional stiffness of the steel box girder, the rigid central buckle and the elastic restraints connecting the towers and the steel box girder on the dynamic characteristics of the triple-tower suspension bridge. The results show that, variation of vertical, lateral and torsion stiffness of stiffening girders have effects on the vibration frequency in corresponding directions only and have little effects in other directions. The elastic restraints have a more significant effect on the dynamic characteristics than the central buckle, and decreasing the stiffness of the elastic restraints results in the appearance of a longitudinal floating vibration mode of the bridge. The results obtained could serve as a valuable numerical reference for analyzing and designing super-long-span tripletower suspension bridges.

Natural Vibration Characteristics of Long-Span Suspension Bridge with CFRP Cables

2010 ◽  
Vol 168-170 ◽  
pp. 1708-1711
Author(s):  
Hong Yu Zheng ◽  
Huai Yan Jiang ◽  
Zhi Tao Lu
Keyword(s):  
Natural Vibration ◽  
High Strength ◽  
Suspension Bridge ◽  
Vibration Characteristics ◽  
Maintenance Cost ◽  
Suspension Bridges ◽  
Long Span ◽  
Steel Cables ◽  
Wind Stability ◽  
Natural Vibration Characteristics

A non-corrosion, high strength, light weight material – carbon fiber reinforced polymer (CFRP) is introduced to replace steel as cable system in long-span suspension bridge for improving loading efficiency, reducing maintenance cost, enlarging the span of suspension bridge. The natural vibration characteristics of such new suspension bridge with CFRP cables are investigated by means of finite element in this paper. Two 2000m-span suspension bridges with steel cables and CFRP cables respectively are designed, analyzed, verified and compared. The analysis results provide a picture of the changes in natural vibration characteristics and the wind stability and earthquake-resistant behavior are briefly discussed if CFRP cables were applied.

Sign in / Sign up

Export Citation Format

Share Document