Fault Classification Model of Rotor Based on Support Vector Machine

2011 ◽  
Vol 66-68 ◽  
pp. 1982-1987
Author(s):  
Wei Niu ◽  
Guo Qing Wang ◽  
Zheng Jun Zhai ◽  
Juan Cheng
Keyword(s):  
Support Vector Machine ◽  
Fault Diagnosis ◽  
Rotating Machinery ◽  
Classification Model ◽  
Fault Classification ◽  
Support Vector ◽  
Vibration Signals ◽  
Good Classification ◽  
Speed Change ◽  
Diagnosis Model

The vibration signals of rotating machinery in operation consist of plenty of information about its running condition, and extraction and identification of fault signals in the process of speed change are necessary for the fault diagnosis of rotating machinery. This paper improves DDAG classification method and proposes a new fault diagnosis model based on support vector machine to solve the problem of restricting the rotating machinery fault intelligent diagnosis due to the lack of fault data samples. The testing results demonstrate that the model has good classification precision and can correctly diagnose faults.

scholarly journals Rotating Machinery Fault Diagnosis for Imbalanced Data Based on Fast Clustering Algorithm and Support Vector Machine

2017 ◽  
Vol 2017 ◽  
pp. 1-15 ◽  
Author(s):  
Xiaochen Zhang ◽  
Dongxiang Jiang ◽  
Te Han ◽  
Nanfei Wang ◽  
Wenguang Yang ◽  
...  
Keyword(s):  
Support Vector Machine ◽  
Fault Diagnosis ◽  
Clustering Algorithm ◽  
Imbalanced Data ◽  
Principal Component ◽  
Rotating Machinery ◽  
Support Vector ◽  
Data Set ◽  
Diagnosis Model ◽  
Sample Set

To diagnose rotating machinery fault for imbalanced data, a method based on fast clustering algorithm (FCA) and support vector machine (SVM) was proposed. Combined with variational mode decomposition (VMD) and principal component analysis (PCA), sensitive features of the rotating machinery fault were obtained and constituted the imbalanced fault sample set. Next, a fast clustering algorithm was adopted to reduce the number of the majority data from the imbalanced fault sample set. Consequently, the balanced fault sample set consisted of the clustered data and the minority data from the imbalanced fault sample set. After that, SVM was trained with the balanced fault sample set and tested with the imbalanced fault sample set so the fault diagnosis model of the rotating machinery could be obtained. Finally, the gearbox fault data set and the rolling bearing fault data set were adopted to test the fault diagnosis model. The experimental results showed that the fault diagnosis model could effectively diagnose the rotating machinery fault for imbalanced data.

Classification and Location of Transformer Winding Deformations using Genetic Algorithm and Support Vector Machine

2021 ◽  
Vol 14 ◽  
Author(s):  
Zhenhua Li ◽  
Junjie Cheng ◽  
A. Abu-Siada
Keyword(s):  
Genetic Algorithm ◽  
Support Vector Machine ◽  
Fault Diagnosis ◽  
Fault Location ◽  
Classification Model ◽  
Fault Classification ◽  
Support Vector ◽  
Fault Type ◽  
Svm Model ◽  
Transformer Winding

Background: Winding deformation is one of the most common faults that an operating power transformer experiences over its operational life. Thus it is essential to detect and rectify such faults at early stages to avoid potential catastrophic consequences to the transformer. At present, methods published in the literature for transformer winding fault diagnosis are mainly focused on identifying fault type and quantifying its extent without giving much attention to the identification of fault location. Methods: This paper presents a method based on a genetic algorithm and support vector machine (GA-SVM) to improve the faults’ classification of power transformers in terms of type and location. In this regard, a sinusoidal sweep signal in the frequency range of 600 kHz to 1MHz is applied to one terminal of the transformer winding. A mathematical index of the induced current at the head and end of the transformer winding under various fault conditions is used to extract unique features that are fed to a support vector machine (SVM) model for training. Parameters of the SVM model are optimized using a genetic algorithm (GA). Results : The effectiveness of mathematical indicators to extract fault type characteristics and the proposed fault classification model for fault diagnosis is demonstrated through extensive simulation analysis for various transformer winding faults at different locations. Conclusion : The proposed model can effectively identify different fault types and determine their location within the transformer winding, and the diagnostic rate of the fault type and fault location are 100% and 90%, respectively.

scholarly journals A Fault Diagnosis Model for Rotating Machinery Using VWC and MSFLA-SVM Based on Vibration Signal Analysis

2019 ◽  
Vol 2019 ◽  
pp. 1-16 ◽  
Author(s):  
Lei You ◽  
Wenjie Fan ◽  
Zongwen Li ◽  
Ying Liang ◽  
Miao Fang ◽  
...  
Keyword(s):  
Feature Extraction ◽  
Fault Diagnosis ◽  
Vibration Signal ◽  
Rotating Machinery ◽  
Fault Classification ◽  
Support Vector ◽  
Local Optimum ◽  
Classification Rate ◽  
Wavelet Energy ◽  
Diagnosis Model

Fault diagnosis of rotating machinery mainly includes fault feature extraction and fault classification. Vibration signal from the operation of machinery usually could help diagnosing the operational state of equipment. Different types of fault usually have different vibrational features, which are actually the basis of fault diagnosis. This paper proposes a novel fault diagnosis model, which extracts features by combining vibration severity, dyadic wavelet energy time-spectrum, and coefficient power spectrum of the maximum wavelet energy level (VWC) at the feature extraction stage. At the stage of fault classification, we design a support vector machine (SVM) based on the modified shuffled frog-leaping algorithm (MSFLA) for the accurate classifying machinery fault method. Specifically, we use the MSFLA method to optimize SVM parameters. MSFLA can avoid getting trapped into local optimum, speeding up convergence, and improving classification accuracy. Finally, we evaluate our model on real rotating machinery platform, which has four different states, i.e., normal state, eccentric axle fault (EAF), bearing pedestal fault (BPF), and sealing ring wear fault (SRWF). As demonstrated by the results, the VWC method is efficient in extracting vibration signal features of rotating machinery. Based on the extracted features, we further compare our classification method with other three fault classification methods, i.e., backpropagation neural network (BPNN), artificial chemical reaction optimization algorithm (ACROA-SVM), and SFLA-SVM. The experiment results show that MSFLA-SVM achieves a much higher fault classification rate than BPNN, ACROA-SVM, and SFLA-SVM.

scholarly journals A fault diagnosis method based on the Support Vector Machine in rod pumping systems

2021 ◽  
Vol 2125 (1) ◽  
pp. 012004
Author(s):  
Juanni Li ◽  
Jun Shao
Keyword(s):  
Support Vector Machine ◽  
Fault Diagnosis ◽  
Classification Model ◽  
Petroleum Engineering ◽  
Fault Classification ◽  
Support Vector ◽  
Training Time ◽  
Sucker Rod ◽  
Artificial Intelligence Technology ◽  
Diagnosis Method

Abstract Monitoring the working status of the sucker rod pump is an important part in petroleum engineering. With the development of artificial intelligence technology, more methods have been applied to the fault diagnosis of rod pumping systems. An evolutional fault diagnosis method based on Support Vector Machine (SVM) in sucker rod pumping systems is proposed. Fourier descriptors and Light Field compression algorithm are used in this method to extract the graphic features of the indicator diagram. SVM is used to build fault classification model. This method is verified experimentally through data of indicator diagrams and the results show that it has a shorter training time and higher accuracy.

scholarly journals Analog Circuit Fault Diagnosis Based on Support Vector Machine Classifier and Fuzzy Feature Selection

Electronics ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1496
Author(s):  
Hao Liang ◽  
Yiman Zhu ◽  
Dongyang Zhang ◽  
Le Chang ◽  
Yuming Lu ◽  
...  
Keyword(s):  
Support Vector Machine ◽  
Fault Diagnosis ◽  
Mutual Information ◽  
Analog Circuit ◽  
Fault Classification ◽  
Support Vector ◽  
Svm Classifier ◽  
Fault Parameters ◽  
Diagnosis Method ◽  
Circuit Fault Diagnosis

In analog circuit, the component parameters have tolerances and the fault component parameters present a wide distribution, which brings obstacle to classification diagnosis. To tackle this problem, this article proposes a soft fault diagnosis method combining the improved barnacles mating optimizer(BMO) algorithm with the support vector machine (SVM) classifier, which can achieve the minimum redundancy and maximum relevance for feature dimension reduction with fuzzy mutual information. To be concrete, first, the improved barnacles mating optimizer algorithm is used to optimize the parameters for learning and classification. We adopt six test functions that are on three data sets from the University of California, Irvine (UCI) machine learning repository to test the performance of SVM classifier with five different optimization algorithms. The results show that the SVM classifier combined with the improved barnacles mating optimizer algorithm is characterized with high accuracy in classification. Second, fuzzy mutual information, enhanced minimum redundancy, and maximum relevance principle are applied to reduce the dimension of the feature vector. Finally, a circuit experiment is carried out to verify that the proposed method can achieve fault classification effectively when the fault parameters are both fixed and distributed. The accuracy of the proposed fault diagnosis method is 92.9% when the fault parameters are distributed, which is 1.8% higher than other classifiers on average. When the fault parameters are fixed, the accuracy rate is 99.07%, which is 0.7% higher than other classifiers on average.

On-line fault diagnosis model for locomotive traction inverter based on wavelet transform and support vector machine

2018 ◽  
Vol 88-90 ◽  
pp. 1274-1280 ◽  
Author(s):  
Mei Fei ◽  
Liu Ning ◽  
Miao Huiyu ◽  
Pan Yi ◽  
Sha Haoyuan ◽  
...  
Keyword(s):  
Support Vector Machine ◽  
Wavelet Transform ◽  
Fault Diagnosis ◽  
Support Vector ◽  
On Line ◽  
Diagnosis Model

scholarly journals Fault Diagnosis of Rotating Machinery Based on One-Dimensional Deep Residual Shrinkage Network with a Wide Convolution Layer

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Jingli Yang ◽  
Tianyu Gao ◽  
Shouda Jiang ◽  
Shijie Li ◽  
Qing Tang
Keyword(s):  
Fault Diagnosis ◽  
Noise Immunity ◽  
Rotating Machinery ◽  
Experimental Results ◽  
Vibration Signals ◽  
One Dimensional ◽  
Noise Interference ◽  
Diagnosis Method ◽  
Diagnosis Model ◽  
Short Time

In actual engineering applications, inevitable noise seriously affects the accuracy of fault diagnosis for rotating machinery. To effectively identify the fault classes of rotating machinery under noise interference, an efficient fault diagnosis method without additional denoising procedures is proposed. First, a one-dimensional deep residual shrinkage network, which directly takes the raw vibration signals contaminated by noise as input, is developed to realize end-to-end fault diagnosis. Then, to further enhance the noise immunity of the diagnosis model, the first layer of the model is set to a wide convolution layer to extract short time features. Moreover, an adaptive batch normalization algorithm (AdaBN) is introduced into the diagnosis model to enhance the adaptability to noise. Experimental results illustrate that the fault diagnosis model for rotating machinery based on one-dimensional deep residual shrinkage network with a wide convolution layer (1D-WDRSN) can accurately identify the fault classes even under noise interference.

scholarly journals Research on Fault Diagnosis Model of Rotating Machinery Vibration Based on Information Entropy and Improved SVM

2019 ◽  
Vol 118 ◽  
pp. 02036 ◽  
Author(s):  
Hankun Bing ◽  
Yuzhu Zhao ◽  
Le Pang ◽  
Minmin Zhao
Keyword(s):  
Support Vector Machine ◽  
Fault Diagnosis ◽  
Energy Spectrum ◽  
Time Domain ◽  
Information Entropy ◽  
Singular Value ◽  
Support Vector ◽  
Learning Platform ◽  
Diagnosis Model ◽  
Concept Of Information

Based on the concept of information entropy, this paper analyzes typical nonlinear vibration fault signals of steam turbine based on spectrum, wavelet and HHT theory methods, and extracts wavelet energy spectrum entropy, IMF energy spectrum entropy, time domain singular value entropy and frequency domain power spectrum entropy as faults. The feature is supported by a support vector machine (SVM) as a learning platform. The research results show that the fusion information entropy describes the vibration fault more comprehensively, and the support vector machine fault diagnosis model can achieve higher diagnostic accuracy.

scholarly journals A Transformer Fault Diagnosis Model Based on Chemical Reaction Optimization and Twin Support Vector Machine

Energies ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 960 ◽  
Author(s):  
Fang Yuan ◽  
Jiang Guo ◽  
Zhihuai Xiao ◽  
Bing Zeng ◽  
Wenqiang Zhu ◽  
...  
Keyword(s):  
Support Vector Machine ◽  
Fault Diagnosis ◽  
Chemical Reaction ◽  
Twin Support Vector Machine ◽  
Support Vector ◽  
Chemical Reaction Optimization ◽  
Model Based ◽  
Reaction Optimization ◽  
Diagnosis Model ◽  
Transformer Fault

The condition monitoring and fault diagnosis of power transformers plays a significant role in the safe, stable and reliable operation of the whole power system. Dissolved gas analysis (DGA) methods are widely used for fault diagnosis, however, their accuracy is limited by the selection of DGA features and the performance of fault diagnosis models, for example, the classical support vector machine (SVM), is easily affected by unbalanced training samples. This paper presents a transformer fault diagnosis model based on chemical reaction optimization and a twin support vector machine. Twin support vector machines (TWSVMs) are used as classifiers for solving problems involving unbalanced and insufficient samples. Restricted Boltzmann machines (RBMs) are used for data preprocessing to ensure the effective identification of feature parameters and improve the efficiency and accuracy of fault diagnosis. The chemical reaction optimization (CRO) algorithm is used to optimize TWSVM parameters to select the optimal training parameters. The cross-validation (CV) method is used to ensure the reliability and generalization ability of the diagnostic model. Finally, the validity of the model is verified using real fault samples and random testing.

scholarly journals A Transformer Fault Diagnosis Model Based On Hybrid Grey Wolf Optimizer and LS-SVM

Energies ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 4170 ◽  
Author(s):  
Bing Zeng ◽  
Jiang Guo ◽  
Wenqiang Zhu ◽  
Zhihuai Xiao ◽  
Fang Yuan ◽  
...  
Keyword(s):  
Support Vector Machine ◽  
Fault Diagnosis ◽  
Least Square ◽  
Ratio Method ◽  
Support Vector ◽  
Grey Wolf Optimizer ◽  
Local Optimum ◽  
Grey Wolf ◽  
Diagnosis Model ◽  
Transformer Fault

Dissolved gas analysis (DGA) is a widely used method for transformer internal fault diagnosis. However, the traditional DGA technology, including Key Gas method, Dornenburg ratio method, Rogers ratio method, International Electrotechnical Commission (IEC) three-ratio method, and Duval triangle method, etc., suffers from shortcomings such as coding deficiencies, excessive coding boundaries and critical value criterion defects, which affect the reliability of fault analysis. Grey wolf optimizer (GWO) is a novel swarm intelligence optimization algorithm proposed in 2014 and it is easy for the original GWO to fall into the local optimum. This paper presents a new meta-heuristic method by hybridizing GWO with differential evolution (DE) to avoid the local optimum, improve the diversity of the population and meanwhile make an appropriate compromise between exploration and exploitation. A fault diagnosis model of hybrid grey wolf optimized least square support vector machine (HGWO-LSSVM) is proposed and applied to transformer fault diagnosis with the optimal hybrid DGA feature set selected as the input of the model. The kernel principal component analysis (KPCA) is used for feature extraction, which can decrease the training time of the model. The proposed method shows high accuracy of fault diagnosis by comparing with traditional DGA methods, least square support vector machine (LSSVM), GWO-LSSVM, particle swarm optimization (PSO)-LSSVM and genetic algorithm (GA)-LSSVM. It also shows good fitness and fast convergence rate. Accuracies calculated in this paper, however, are significantly affected by the misidentifications of faults that have been made in the DGA data collected from the literature.

Sign in / Sign up

Export Citation Format

Share Document