Study of N-1L Corrosion of Carbon Steel in Acidic Desulfurizer Performance

2014 ◽  
Vol 670-671 ◽  
pp. 37-40 ◽  
Author(s):  
Shi Dong Wang ◽  
Qiang Wang ◽  
Jing Li ◽  
Shu Liang Zang
Keyword(s):  
Weight Loss ◽  
Ionic Liquid ◽  
Polyethylene Glycol ◽  
Carbon Steel ◽  
Steel Corrosion ◽  
Inhibition Rate ◽  
Inhibition Effect ◽  
Steel Material ◽  
Weight Loss Method ◽  
Loss Method

This paper uses a metal hung weight loss method, acidic ionic liquid desulfurizer as the media, by adding different inhibitor (Polyethylene Glycol, SDBS, Functional ionic liquids), contrast to carbon steel corrosion in the absence of inhibitor, understanding of their respective inhibition effect. In the experiment, the carbon steel material, different kinds and concentrations of the inhibitor in the medium, the corrosion rate measured by weight loss method. Contrast to the blank experiment the inhibition rate can be calculated. The experiment proved that the inhibition effect of several inhibitor at room temperature, and calculate their respective optimal concentration. The experiment also investigated the compound of several corrosion inhibition synergies, confirm the good corrosion inhibiting effect of polyethylene Glycol and SDBS complex, the inhibition rate reached 69.2%.Excellent inhibition effect of the ionic liquid corrosion inhibitor and the inhibition rate reached 88.3%, showing a clear advantage.

Synergistic Inhibition Effect of Sodium Silicte and Phytic Acid for Carbon Steel in Neutral Salt Water

2011 ◽  
Vol 194-196 ◽  
pp. 134-138 ◽  
Author(s):  
Hong Yun Ma ◽  
Shou Zhi Yi ◽  
Qin Zhang
Keyword(s):  
Weight Loss ◽  
Carbon Steel ◽  
Phytic Acid ◽  
Sodium Silicate ◽  
Inhibition Efficiency ◽  
Neutral Salt ◽  
Inhibition Effect ◽  
Tafel Polarization ◽  
Weight Loss Method ◽  
Loss Method

The inhibition effects of sodium silicate, phytic acid and their mixtures in 5% NaCl solutions have been investigated using weight loss method and Tafel polarization techniques. The surface morphology of carbon steel was obtained using scanning electron microscopy (SEM). The results show that the co-addition of 70 mg∙1-1sodium silicate and 5 g∙1-1phytic acid has the optimum inhibition efficiency (84.15%) and the lowest corrosion rate (0.13 g∙m-2∙h-1). Compared with their individual inhibition effects, the optimum inhibition efficiency of sodium silicate is 62.17% at 90 mg∙1-1and phytic acid is 80.05% at 15 g∙1-1, respectively. The results obtained from weight loss method and Tafel polarization curves are in good agreement. The results show the enhanced inhibition effect by the inhibitors mixtures.

The Effect of Regional Selectivity on the Corrosion Inhibition Properties of Synthetic Ionic Liquid with the Synergistic Action of Cation and Anion

2021 ◽  
Author(s):  
Jian Sun ◽  
Xinyue Wang ◽  
huajing Gao ◽  
Feng Chen ◽  
Xing-Bao Wang ◽  
...  
Keyword(s):  
Weight Loss ◽  
Ionic Liquid ◽  
Ionic Liquids ◽  
Hybrid Systems ◽  
Corrosion Inhibition ◽  
Synergistic Action ◽  
Weight Loss Method ◽  
Loss Method ◽  
Regional Selectivity

By adding different proportions of N-buthylimidazole and carboxyethylthiosuccinic acid (CETSA), three hybrid systems of ionic liquids were synthesized and named ILHS1, ILHS2 and ILHS3. By using weight loss method, electrochemical...

scholarly journals The inhibition of mild steel corrosion in 0.5 M H2SO4 solution by radish leaf extract

RSC Advances ◽  
2019 ◽  
Vol 9 (70) ◽  
pp. 40997-41009 ◽  
Author(s):  
Dongyi Li ◽  
Panpan Zhang ◽  
Xinyu Guo ◽  
Xiaowei Zhao ◽  
Ying Xu
Keyword(s):  
Weight Loss ◽  
Mild Steel ◽  
Electrochemical Method ◽  
Leaf Extract ◽  
Steel Corrosion ◽  
Inhibitory Effect ◽  
H2so4 Solution ◽  
Mild Steel Corrosion ◽  
Weight Loss Method ◽  
Loss Method

The inhibitory effect of radish leaf extract (RLE) on mild steel corrosion in 0.5 M H2SO4 was studied by the weight loss method and the electrochemical method.

Inhibition of Aloe in Corrosion Experimental Research

2011 ◽  
Vol 233-235 ◽  
pp. 648-651
Author(s):  
Ai Jun Wei ◽  
Bei Feng ◽  
Xin Zhang ◽  
Fu Yong Huo
Keyword(s):  
Weight Loss ◽  
Corrosion Rate ◽  
Work Environment ◽  
Corrosion Inhibition ◽  
Corrosion Test ◽  
Inhibition Effect ◽  
Corrosion Medium ◽  
Different Temperatures ◽  
Weight Loss Method ◽  
Loss Method

In this corrosion test, simulated brine is used as corrosion medium, added different concentrations of aloe juice. Static weight-loss method is employed, meanwhile, we calculated corrosion rate of Q235 steel and researched on the corrosion inhibition effect of aloe in different temperatures. Results show that aloe is a good inhibitor, rate of corrosion inhibition can reach 80% or more and suitable for the temperature of work environment is less than 60 °C.

scholarly journals Microbial Corrosion of API 5L X-70 Carbon Steel by ATCC 7757 and Consortium of Sulfate-Reducing Bacteria

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Arman Abdullah ◽  
Nordin Yahaya ◽  
Norhazilan Md Noor ◽  
Rosilawati Mohd Rasol
Keyword(s):  
Weight Loss ◽  
Carbon Steel ◽  
Corrosion Rate ◽  
Sulfate Reducing Bacteria ◽  
Desulfovibrio Vulgaris ◽  
Corrosion Morphology ◽  
Sulfate Reducing ◽  
Weight Loss Method ◽  
Loss Method ◽  
Reducing Bacteria

Various cases of accidents involving microbiology influenced corrosion (MIC) were reported by the oil and gas industry. Sulfate reducing bacteria (SRB) have always been linked to MIC mechanisms as one of the major causes of localized corrosion problems. In this study, SRB colonies were isolated from the soil in suspected areas near the natural gas transmission pipeline in Malaysia. The effects of ATCC 7757 and consortium of isolated SRB upon corrosion on API 5L X-70 carbon steel coupon were investigated using a weight loss method, an open circuit potential method (OCP), and a potentiodynamic polarization curves method in anaerobic conditions. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) were then used to determine the corrosion morphology in verifying the SRB activity and corrosion products formation. Results from the study show that the corrosion rate (CR) of weight loss method for the isolated SRB is recorded as 0.2017 mm/yr compared to 0.2530 mm/yr for ATCC 7757. The Tafel plot recorded the corrosion rate of 0.3290 mm/yr for Sg. Ular SRB and 0.2500 mm/yr forDesulfovibrio vulgaris. The results showed that the consortia of isolated SRB were of comparable effects and features with the single ATCC 7757 strain.

PENGARUH BASIC SEDIMENT AND WATER TERHADAP LAJU KOROSI PIPA X52 DAN A53 PADA MEDIA OIL SLUDGE.

ROTOR ◽  
2017 ◽  
Vol 10 (1) ◽  
pp. 13
Author(s):  
Naufan Arviansyah ◽  
Sumarji Sumarji ◽  
Digdo Listyadi Setyawan
Keyword(s):  
Weight Loss ◽  
Carbon Steel ◽  
Corrosion Rate ◽  
Low Carbon Steel ◽  
Measuring Method ◽  
Oil Sludge ◽  
Uniform Corrosion ◽  
Low Carbon ◽  
Weight Loss Method ◽  
Loss Method

This research have a purpuse to know corrosion rate in pipe X52 and A53 at oil sludge media caused BS and W. Corrosion is a damage of metal that occurs because reaction between metal with environtment and produce unwanted of corrosion product. Pipe X52 and A53 is a type of low carbon steel that use for fluid transportation system in industry. Oil sludge is a sediment of crude oil from main gathering storage and containing variouses elements. Oil sludge have a one of element is Basic Sediment and Water that is can make corrosion happen to distribution pipes. Measuring Method used in this research is weight loss method. The result of corrosion rate in Oil Sludge media containing 30,17% BS and W for pipe A53 is 1,64 x 10-2 mmpy and the result for pipa X52 is 2,47 x 10-2 mmpy. The result of corrosion rate in Oil Sludge media containing 60,67% BS and W for pipe A53 is 2,12 x 10-2 mmpy and for pipe X52 the result is 3,13 x 10-2 mmpy. The result of this research showed pipe A53 have more resistance than pipe X52. The corrosion is classified as uniform corrosion. Keywords : A53, Weight Loss, Oil Sludge, X52.

Inhibition of Corrosion of Carbon Steel by Resorcinol-Zn2+ System in Well Water

2015 ◽  
Vol 1 (2) ◽  
Author(s):  
Benita Sherine ◽  
A. Jamal Abdul Nasser ◽  
S. Rajendran
Keyword(s):  
Weight Loss ◽  
Carbon Steel ◽  
Inhibition Efficiency ◽  
Well Water ◽  
Protective Film ◽  
Zinc Ions ◽  
Immersion Period ◽  
Afm Analysis ◽  
Weight Loss Method ◽  
Loss Method

The inhibition efficiencies of inhibitor systems constituting various combinations of resorcinol and zinc ions in controlling corrosion of carbon steel immersed in well water have been evaluated by weight loss method. 75 ppm of zinc has 36% inhibition efficiency (Immersion period =7 days). When 100 ppm of resorcinol is added, the IE increases to 96%. The nature of the protective film formed on the metal surface has been analyzed by FTIR spectra, SEM and AFM analysis. The protective film is found to consist of Fe2+ - resorcinol complex and Zn(OH)2.

scholarly journals Green approach towards corrosion inhibition of carbon steel in produced oilfield water using lemongrass extract

RSC Advances ◽  
2017 ◽  
Vol 7 (72) ◽  
pp. 45241-45251 ◽  
Author(s):  
M. A. Deyab ◽  
M. M. Osman ◽  
A. E. Elkholy ◽  
F. El-Taib Heakal
Keyword(s):  
Weight Loss ◽  
Electrochemical Impedance Spectroscopy ◽  
Carbon Steel ◽  
Impedance Spectroscopy ◽  
Electrochemical Impedance ◽  
Cymbopogon Citratus ◽  
Green Approach ◽  
Weight Loss Method ◽  
Loss Method ◽  
Oilfield Water

The anti-corrosion action of lemongrass (cymbopogon citratus) extract (LGE) was evaluated for carbon steel in produced oilfield water using weight loss method and electrochemical impedance spectroscopy (EIS).

scholarly journals Effect of Additional Sulfide and Thiosulfate on Corrosion of Q235 Carbon Steel in Alkaline Solutions

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Bian Li Quan ◽  
Jun Qi Li ◽  
Chao Yi Chen
Keyword(s):  
Carbon Steel ◽  
Photoelectron Spectroscopy ◽  
Steel Corrosion ◽  
Corrosion Products ◽  
Alkaline Solutions ◽  
Corrosion Mechanism ◽  
Surface Cracks ◽  
Weight Loss Method ◽  
Q235 Carbon Steel ◽  
Loss Method

This paper investigated the effect of additional sulfide and thiosulfate on Q235 carbon steel corrosion in alkaline solutions. Weight loss method, scanning electron microscopy (SEM) equipped with EDS, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements were used in this study to show the corrosion behavior and electrochemistry of Q235 carbon steel. Results indicate that the synergistic corrosion rate of Q235 carbon steel in alkaline solution containing sulfide and thiosulfate is larger than that of sulfide and thiosulfate alone, which could be due to redox reaction of sulfide and thiosulfate. The surface cracks and pitting characteristics of the specimens after corrosion were carefully examined and the corrosion products film is flake grains and defective. The main corrosion products of specimen induced by S2−and S2O32-are FeS, FeS2, Fe3O4, and FeOOH. The present study shows that the corrosion mechanism of S2−and S2O32-is different for the corrosion of Q235 carbon steel.

The Effect of Compound Corrosion Inhibitor of Sodium Silicate in the Chlorine Dioxide Solution

2014 ◽  
Vol 1061-1062 ◽  
pp. 137-140
Author(s):  
Kui Tao Wang ◽  
Dong Long He ◽  
Jin Long Gao ◽  
Na Gu ◽  
Qing Lai Meng
Keyword(s):  
Carbon Steel ◽  
Sodium Silicate ◽  
Chlorine Dioxide ◽  
Mass Concentration ◽  
Room Temperature ◽  
Corrosion Mechanism ◽  
Optimal Conditions ◽  
Inhibition Effect ◽  
Weight Loss Method ◽  
Loss Method

The corrosion inhibition effect of composite inhibitors of sodium silicate on carbon steel was studied in 200 mg/L chlorine dioxide solution by static weight-loss method at room temperature (25 °C) .Analyzed the possible corrosion mechanism and the optimal conditions. The results show that sodium silicate and HEDP had apparent synergistic effect in chlorine dioxide solution. When the mass concentration of sodium silicate was 200 mg/L and HEDP was 100 mg/L can make the corrosion inhibiting rate on carbon steel up to 86.58%.

Sign in / Sign up

Export Citation Format

Share Document