Impact of Long Transport on Taiwan’s Ozone Air Quality from East Asia

2014 ◽  
Vol 692 ◽  
pp. 13-21 ◽  
Author(s):  
Chien Hung Chen ◽  
Ken Hui Chang ◽  
Tu Fu Chen

To clarify the influence of air pollutants emitted from East Asia on the ozone air quality in Taiwan, this study performs a long-term simulation result for 4 months using Taiwan Air Quality Model. Influence from the current (2007) and future (2020) East Asian emissions on the ozone concentration in Taiwan were simulated. The date ranges simulated were February, May, August, and October of 2007, representing the seasons of winter, spring, summer, and autumn. Influence from transboundary transport on Taiwan was assessed based on simulations of these 4 months. The influence of transboundary transport on the monthly average of daily peak ozone concentrations in Taiwan is 15.5 ppb. Worst case scenarios in 2020 will contribute an additional 3.7 ppb. If the size of ozone pollution area (≧120 ppb) is considered, transboundary transport contributed to 72 % of the polluted area in 2007; the ozone pollution area in the worst case scenario in 2020 will further increase by 47 % from 2007 levels.

2004 ◽  
Vol 35 ◽  
pp. S767-S768
Author(s):  
S. WURZLER ◽  
J. GEIGER ◽  
U. HARTMANN ◽  
V. HOFFMANN ◽  
U. PFEFFER ◽  
...  

2017 ◽  
Vol 51 (11) ◽  
pp. 6229-6236 ◽  
Author(s):  
Andrew V. Beddows ◽  
Nutthida Kitwiroon ◽  
Martin L. Williams ◽  
Sean D. Beevers

2016 ◽  
Vol 9 (3) ◽  
pp. 1201-1218 ◽  
Author(s):  
Min Zhong ◽  
Eri Saikawa ◽  
Yang Liu ◽  
Vaishali Naik ◽  
Larry W. Horowitz ◽  
...  

Abstract. We conducted simulations using the Weather Research and Forecasting model coupled with Chemistry (WRF-Chem) version 3.5 to study air quality in East Asia at a spatial resolution of 20 km  ×  20 km. We find large discrepancies between two existing emissions inventories: the Regional Emission Inventory in ASia version 2 (REAS) and the Emissions Database for Global Atmospheric Research version 4.2 (EDGAR) at the provincial level in China, with maximum differences of up to 500 % for CO emissions, 190 % for NO, and 160 % for primary PM10. Such discrepancies in the magnitude and the spatial distribution of emissions for various species lead to a 40–70 % difference in surface PM10 concentrations, 16–20 % in surface O3 mixing ratios, and over 100 % in SO2 and NO2 mixing ratios in the polluted areas of China. WRF-Chem is sensitive to emissions, with the REAS-based simulation reproducing observed concentrations and mixing ratios better than the EDGAR-based simulation for July 2007. We conduct additional model simulations using REAS emissions for January, April, July, and October of 2007 and evaluate simulations with available ground-level observations. The model results illustrate clear regional variations in the seasonal cycle of surface PM10 and O3 over East Asia. The model meets the air quality model performance criteria for both PM10 (mean fractional bias, MFB ⩽ ±60 %) and O3 (MFB ⩽ ±15 %) at most of the observation sites, although the model underestimates PM10 over northeastern China in January. The model predicts the observed SO2 well at sites in Japan, while it tends to overestimate SO2 in China in July and October. The model underestimates observed NO2 in all 4 months. Our study highlights the importance of constraining emissions at the provincial level for regional air quality modeling over East Asia. Our results suggest that future work should focus on the improvement of provincial-level emissions especially estimating primary PM, SO2, and NOx.


2019 ◽  
Author(s):  
Jianhui Jiang ◽  
Sebnem Aksoyoglu ◽  
Imad El-Haddad ◽  
Giancarlo Ciarelli ◽  
Hugo A. C. Denier van der Gon ◽  
...  

Abstract. Source apportionment of organic aerosols (OA) is of great importance to better understand the health impact and climate effects of particulate matter air pollution. Air quality models act as potential tools to identify OA components and sources at high spatial and temporal resolution, however, they generally underestimate OA concentrations, and comparisons of their outputs with an extended set of measurements are still rare due to the lack of long-term experimental data. In this study, we addressed such challenges at the European level. Using the regional air quality model Comprehensive Air Quality Model with Extensions (CAMx) and a volatility basis set (VBS) scheme which was optimized based on recent chamber experiments with wood burning and diesel vehicle emissions, and contained more source-specific sets compared to previous studies, we calculated the contribution of OA components and defined their sources over a whole-year period (2011). We modelled separately the primary and secondary OA contributions from old and new diesel and gasoline vehicles, biomass burning (mostly residential wood burning and agricultural waste burning excluding wildfires), other anthropogenic sources (mainly shipping, industry and energy production) and biogenic sources. An important feature of this study is that we evaluated the model results with measurements over a longer period than in the previous studies which strengthens our confidence in our modelled source apportionment results. Comparison against positive matrix factorization (PMF) analyses of aerosol mass spectrometric measurements at nine European sites suggested that the modified VBS scheme improved the model performance for total OA as well as the OA components, including hydrocarbon-like (HOA), biomass burning (BBOA) and oxygenated components (OOA). By using the modified VBS scheme, the mean bias of OOA was reduced from −1.3 μg m−3 to −0.4 μg m−3 corresponding to a reduction of mean fractional bias from −45 % to −20 %. The winter OOA simulation, which was largely underestimated in previous studies, was improved by 29 %–42 % among the evaluated sites compared to the default parameterization. Wood burning was the dominant OA source in winter (61 %) while biogenic emissions contributed ~55 % to OA during summer in Europe on average. In both seasons, the other anthropogenic sources comprised the second largest component (9 % in winter and 19 % in summer as domain average), while the average contributions of diesel and gasoline vehicles were rather small (~5 %) except for the metropolitan areas where the highest contribution reached 31 %. The results indicate the need to improve the emission inventory to include currently missing and highly uncertain local emissions, as well as further improvement of VBS parameterization for winter biomass burning. Although this study focused on Europe, it can be applied in any other part of the globe. This study highlights the ability of long-term measurements and source apportionment modelling to validate and improve emission inventories, and identify sources not yet properly included in existing inventories.


Atmosphere ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 469
Author(s):  
Cheol-Hee Kim ◽  
Fan Meng ◽  
Mizuo Kajino ◽  
Jaehyun Lim ◽  
Wei Tang ◽  
...  

We report the results of year-long PM2.5 (particulate matter less than 2.5 µm in diameter) simulations over Northeast Asia for the base year of 2013 under the framework of the Long-range Transboundary Air Pollutants in Northeast Asia (LTP) project. LTP is a tripartite project launched by China, Japan, and Korea for cooperative monitoring and modeling of the long-range transport (LRT) of air pollutants. In the modeling aspect in the LTP project, each country’s modeling group employs its own original air quality model and options. The three regional air quality models employed by the modeling groups are WRF-CAMx, NHM-RAQM2, and WRF-CMAQ. PM2.5 concentrations were simulated in remote exit-and-entrance areas associated with the LRT process over China, Japan, and Korea. The results showed apparent bias that remains unexplored due to a series of uncertainties from emission estimates and inherent model limitations. The simulated PM10 levels at seven remote exit-and-entrance sites were underestimated with the normalized mean bias of 0.4 ± 0.2. Among the four chemical components of PM2.5 (SO42−, NO3−, organic carbon (OC), and elemental carbon (EC)), the largest inter-model variability was in OC, with the second largest discrepancy in NO3−. Our simulation results also indicated that under considerable SO42− levels, favorable environments for ammonium nitrate formation were found in exit-and-entrance areas between China and Korea, and gas-aerosol partitioning for semi-volatile species of ammonium nitrate could be fully achieved prior to arrival at the entrance areas. Other chemical characteristics, including NO3−/SO42− and OC/EC ratios, are discussed to diagnose the LRT characteristics of PM2.5 in exit-and-entrance areas associated with transboundary transport over China, Japan, and Korea.


2012 ◽  
Vol 3 (1) ◽  
pp. 55-71 ◽  
Author(s):  
Anjaneyulu Yerramilli ◽  
Venkata Srinivas Challa ◽  
Venkata Bhaskar Rao Dodla ◽  
LaToya Myles ◽  
William R. Pendergrass ◽  
...  

Author(s):  
Marc Medrano ◽  
Jack Brouwer ◽  
G. S. Samuelsen ◽  
Marc Carreras ◽  
Donald Dabdub

Distributed Energy Resources (DER) have the potential to meet a significant portion of increased power demands of the future. DER applications can potentially provide benefits in electrical reliability and power quality, in addition to reducing total energy costs in combined cooling, heating and power (CHP) applications. However, the shift from a central generation paradigm to distributed generation results in different emissions characteristics and profiles from both a spatial and temporal perspective. Distributed generation is characterized by many sparsely distributed stationary sources within an urban air-shed compared to central generation where emissions sources are much larger, but typically located outside the air-shed in more remote locations. As a result, high market adoption of fuel-driven (non-renewable) distributed generation (DG) technologies, such as reciprocating engines and microturbines, may influence the air quality within a region. The present paper estimates air quality impacts for a representative distributed generation scenario in the South Coast Air Basin (SoCAB) of California. Simulations are based on the year 2010 with comparison to a base case scenario with no DG emissions. The DG scenarios are developed for a reasonable percentage of power met by DG, representative spatial distribution and temporal operation, and a mix of DG technologies and emissions factors. The resultant emissions inventory for each DG scenario is then provided as input to a three-dimensional air quality model including detailed atmospheric chemistry and transport for simulation of the SoCAB. Preliminary air quality results suggest that there will be an air quality impact, that the impacts will not be uniform throughout the air-shed, and that individual criteria pollutant concentrations may either rise or fall with the introduction of DG.


Sign in / Sign up

Export Citation Format

Share Document