Properties of a Solid–Solid Phase Change Material PAN/SA-LA/ZMS

2014 ◽  
Vol 703 ◽  
pp. 3-8 ◽  
Author(s):  
Jing Guo ◽  
Xiang Kang You ◽  
Li Zhang ◽  
Heng Xue Xiang ◽  
Sen Zhang ◽  
...  
Keyword(s):  
Phase Change ◽  
Phase Change Materials ◽  
Solid Phase ◽  
The Novel ◽  
Structure And Properties ◽  
Scanning Calorimetry ◽  
Solution Blending ◽  
Blending Process ◽  
Change Material ◽  
Insulating Properties

In this study, novel solid–solid phase change materials (PCM) composed of polyacrylonitrile, binary of fatty acids ((blending of stearic acid (SA) and lauric acid (LA)) and zeolite molecular sieve (ZMS) were prepared by solution blending process. The structure and properties of the PCM were characterized using flourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), polarized optical microscopy (POM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TG), respectively. DSC analysis indicated that the crystallization latent heat of the PCM was 125.22 J/g and its phase transition temperature was about 17 °C. The temperature curve for step cooling of the PCM showed that it’s holding time achieved 1 480 s, which explains that the PCM had excellent heat-insulating properties. Based on all results it can be concluded that the novel PCM can be considered as potential PCM for thermal energy storage.

Studies on the synthesis, characterization and application of a novel copolymer macromonomer for polymeric solidsolid phase change materials

e-Polymers ◽  
2008 ◽  
Vol 8 (1) ◽  
Author(s):  
Peng Xi ◽  
Xiao-hua Gu ◽  
Bowen Cheng
Keyword(s):  
Phase Change ◽  
Phase Change Material ◽  
Phase Change Materials ◽  
Solid Phase ◽  
The Novel ◽  
Structure And Properties ◽  
Crystal Properties ◽  
Polymeric Solid ◽  
Vinyl Group ◽  
Change Material

AbstractA novel copolymer as a macromonomer with a polyethylene glycol (PEG) unit as the phase change element and a vinyl group was synthesized for the preparation of polymeric solid-solid phase change materials. The IR, 1HNMR, DSC and WAXD and POM were employed to determine the structure and properties of the novel monomer. The results show that the novel monomer possess steady molecular structure, excellent crystal properties, higher phase change enthalpy and reactivity. Furthermore, the novel polymeric solid-solid phase change material was also prepared via the copolymerization of the novel copolymer macromonomer and styrene. The phase change properties of the polymeric solid-solid phase change material were characterized.

Enhanced Heat Conduction in Cellulose Nanocrystals Grafting Polyethylene Glycol as Solid-Solid Phase Change Materials

2012 ◽  
Vol 557-559 ◽  
pp. 563-566 ◽  
Author(s):  
Yan Nan Liu ◽  
Hou Yong Yu ◽  
Zong Yi Qin ◽  
Long Chen
Keyword(s):  
Polyethylene Glycol ◽  
Phase Change ◽  
Cellulose Nanocrystals ◽  
Thermal Conduction ◽  
Phase Change Materials ◽  
Solid Phase ◽  
Scanning Calorimetry ◽  
Thermal Delay ◽  
Change Material ◽  
Molecular Skeleton

Green copolymers as phase change material were prepared by grafting polyethylene glycol(PEG) onto a rigid molecular skeleton of cellulose nanocrystals (CNs), and their thermal properties were studied by thermal delay method and differential scanning calorimetry. The influences of the CNs on the thermal conductivity behavior and thermal energy storage capacity of the copolymers were evaluated. As expected, a great enhancement on thermal conduction can be achieved by introducing CNs.

Studies on Preparation and Properties of PEG/MMT Solid-Solid Phase Change Material

2012 ◽  
Vol 512-515 ◽  
pp. 1712-1715
Author(s):  
Xiao Hua Gu ◽  
Bao Yun Xu ◽  
Jia Liang Zhou ◽  
Shi Wei Li
Keyword(s):  
Thermal Stability ◽  
Energy Storage ◽  
Phase Change ◽  
Phase Change Material ◽  
Phase Change Materials ◽  
Solid Phase ◽  
Energy Storage Materials ◽  
Scanning Calorimetry ◽  
Storage Behavior ◽  
Change Material

This paper details the preparation of one kind of PEG/MMT solid-solid phase change materials. With polyethylene glycol (PEG) as the phase change materials, montmorillonite (MMT) as skeletons, through the graft copolymerization method, prepare PEG/MMT solid-solid phase change energy storage materials. The structure, the phase transition behavior and thermal stability of PEG/MMT phase change materials were analyzed and studied by infrared spectroscopy (FTIR), thermogravimetry (TG) and differential scanning calorimetry (DSC), and studied the influence of different molecular weight PEG on the capability and structure of the material, polymer phase change energy storage behavior and crystallization behavior. Finally, The PEG/MMT solid-solid phase change material could improve enthalpy value and thermal stability.

Synthesis and Thermal Energy Storage Characteristics of Hyperbranched Polyurethane as Novel Solid-Solid Phase Change Material

2012 ◽  
Vol 182-183 ◽  
pp. 217-221 ◽  
Author(s):  
Ji Hu ◽  
Wan Hui Wang
Keyword(s):  
Phase Change ◽  
Heat Storage ◽  
Solid Phase ◽  
Storage Material ◽  
Scanning Calorimetry ◽  
Hyperbranched Polyurethane ◽  
Heat Storage Material ◽  
Polymeric Solid ◽  
Change Material ◽  
Storage Characteristics

A novel hyperbranched polyurethane solid-solid phase change heat storage material (HB-PUPCM) using hyperbranched polyester as chain extender was synthesized via a two-step process. Differential scanning calorimetry (DSC) and polarizing optical microscopy (POM) were performed to investigate the phase transition behaviors and crystalline morphology. The results indicated that the HB-PUPCM was a good polymeric solid-solid phase change heat storage material.

The Properties of OMMT-PAN-Binary of Fatty Acids Blends as Phase Change Materials

2011 ◽  
Vol 239-242 ◽  
pp. 1101-1104
Author(s):  
Jing Guo ◽  
Heng Xue Xiang ◽  
Cheng Nv Hu
Keyword(s):  
Fatty Acid ◽  
Phase Change ◽  
Phase Change Material ◽  
Phase Change Materials ◽  
Heat Insulation ◽  
Cooling Curve ◽  
Polyacrylonitrile Fiber ◽  
Scanning Calorimetry ◽  
Thermal Circulation ◽  
Change Material

Using stearic acid-lauric acid binary of fatty acid as phase change material, waste polyacrylonitrile fiber (PAN) as supporting material, organic montmorillonite (OMMT) as modifier, and N, N-dimethylformamide as solvent, OMMT-PAN-binary fatty acid composite phase change materials(PCM) is prepared by solution blending. Using Scanning Electron Microscopy (SEM), Differential Scanning Calorimetry (DSC), Thermogravimetric analysis (TG) study the structure and properties of PCM, the optimized preparation techniques of PCM obtained by orthogonal tests. SEM results showed that the PCM was homogeneous structure, binary of fatty acid dispersed in the continuous phase PAN; TGA results indicated that the degradation of the phase change material can be divided into three steps; DSC results showed that the crystallization enthalpy of PCM reached 143.27 J/g, the phase change temperature was around 23°C, and the DSC thermal circulation showed good thermal stability of the PCM; cooling curve showed that the PCM had good heat insulation properties, holding time reached 800s, and after repeated thermal circulation, heat insulation properties remained the same.

Preparation and Characterization of a Novel Polyurethane Solid-Solid Phase Change Materials

2013 ◽  
Vol 785-786 ◽  
pp. 613-617
Author(s):  
Gui Fang Wang ◽  
Dong Ying Li ◽  
Guang Ling Pei
Keyword(s):  
Phase Transition ◽  
Polyethylene Glycol ◽  
Phase Change ◽  
Phase Change Materials ◽  
Solid Phase ◽  
Soft Segment ◽  
Condensation Reaction ◽  
Diphenylmethane Diisocyanate ◽  
Scanning Calorimetry ◽  
Polarization Optical Microscopy

A novel solid-solid phase change materials was synthesized by the two-step condensation reaction of polyethylene glycol (PEG1000), neopentyl glycol (NPG) and 4, 4-diphenylmethane diisocyanate (MDI). Polyethylene glycol (PEG1000) was used as soft segment and 4, 4-diphenylmethane diisocyanate (MDI) as hard segment. The composition, structure and phase change properties were characterized by Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), thermogravimetric analyzer (TGA), polarization optical microscopy (POM) respectively. The results indicated that the PCM appeared typical solid-solid phase transition property and the phase change enthalpy and phase transition temperature reached to 120.45 J/g and 37.32°C, respectively.

scholarly journals Granulation Of Porous Materials with Phase Change Material (PCM)

2021 ◽  
Vol 20 (3) ◽  
pp. 135-144
Author(s):  
Tomasz Bien
Keyword(s):  
Mechanical Strength ◽  
Phase Change ◽  
Construction Industry ◽  
Phase Change Materials ◽  
Nitrogen Adsorption ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Method Of Production ◽  
Adsorption Desorption ◽  
Change Material

The paper describes the research on the method of production of granulated phase-change materials (PCM) used in construction industry for the accumulation of thermal energy. As mineral materials for the granules preparation zeolite from fly ash Na-P1 and natural diatomite dust were used which were impregnated with paraffinic filtration waste and granulated using a combined granulation method. Obtained granules were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), nitrogen adsorption/desorption isotherm, and differential scanning calorimetry (DSC). Mechanical strength of the materials was determined in a “drop strength” test. Performed analyses revealed that mineral composition and micromorphology of the diatomite and zeolite granules were varied, with zeolite granules having higher mechanical strength.

Characterization Phase Change Materials (PCM) Using T-History Method

2016 ◽  
Author(s):  
Navin Kumar ◽  
Debjyoti Banerjee
Keyword(s):  
Phase Change ◽  
Experimental Validation ◽  
Phase Change Materials ◽  
Reference Sample ◽  
Cost Effective ◽  
Experimental Protocol ◽  
Scanning Calorimetry ◽  
Numerical Predictions ◽  
Change Material

“T-history method” is widely used for characterization of thermal properties of Phase Change Material (PCM). In this study improvements are proposed to the experimental protocol used in the conventional T-History method. Experimental validation of numerical predictions for various samples of PCM were performed using the proposed measurement technique. This enabled the evaluation of the improvements in the proposed approach as well as for analyzing the experimental results. This involved measurement of temperature at the surface and in the center of the PCM samples (as well as that of the reference sample materials). The proposed modifications enable enhanced accuracy for estimation of the material properties (when compared to the conventional approaches). The estimates from the proposed approach were observed to be within 10% of the measured values obtained using Differential Scanning Calorimetry (DSC). The proposed approach is amenable to testing large sample sizes, is simpler to implement, provides more rapid data collection and is more cost-effective than that obtained using standard DSC protocols.

Sign in / Sign up

Export Citation Format

Share Document