Porous Materials Based on Poly(methylvinylsiloxane) Cross-Linked with 1,3,5,7-Tetramethylcyclotetrasiloxane in High Internal Phase Emulsion as Precursors to Si-C-O and Si-C-O/Pd Ceramics

Polysiloxane networks were prepared by hydrosilylation of poly(methylvinylsiloxane) (V3 polymer) with 1,3,5,7-tetramethylcyclotetrasiloxane (D4H) at various Si-Vinyl: Si-H groups molar ratios in water-in-oil high internal phase emulsion (HIPE). Curing the emulsions followed by removal of water led to foamed cross-linked polysiloxane systems differing in the cross-linking degrees, as well as residual Si-H and Si-Vinyl group concentrations. Treatment of thus obtained materials in Pd(OAc)2 solution in tetrahydrofuran resulted in the formation of porous palladium/polymer nanocomposites with different Pd contents (1.09–1.70 wt %). Conducted investigations showed that pyrolysis of the studied materials at 1000 °C in argon atmosphere leads to porous Si-C-O and Si-C-O/Pd ceramics containing amorphous carbon and graphitic phases. Thermogravimetric (TG) analysis of the starting cross-linked polymer materials and those containing Pd nanoparticles revealed that the presence of palladium deteriorates thermal stability and decreases ceramic yields of preceramic networks. The extent of this effect depends on polymer cross-linking density in the system.

A Novel Family of [1,4]Thiazino[2,3,4-ij]quinolin-4-ium Derivatives: Regioselective Synthesis Based on Unsaturated Heteroatom and Heterocyclic Compounds and Antibacterial Activity

A novel family of [1,4]thiazino[2,3,4-ij]quinolin-4-ium derivatives was synthesized by annulation reactions of 8-quinolinesulfenyl chloride with unsaturated heteroatom and heterocyclic compounds. It was found that the reactions with 4-pentenoic and 5-hexenoic acids, allyl chloride and bromide, allyl cyanate and vinyl heterocyclic compounds (N-vinyl pyrrolidin-2-one and 1-vinylimidazole) proceeded in a regioselective mode but with the opposite regiochemistry. The reactions with vinyl heterocyclic compounds included electrophilic addition of the sulfur atom of 8-quinolinesulfenyl chloride to the β-carbon atom of the vinyl group. In the case of other substrates, the annulation proceeded with the attachment of the sulfur atom to the α-carbon atom of the vinyl group. The antibacterial activity of novel water-soluble compounds against Enterococcus durans, Bacillus subtilis and Escherichia coli was evaluated. Compounds with high antibacterial activity were found.

Phenanthrene Dimers: Promising Source of Biologically Active Molecules

: To date, just over a hundred phenanthrenoid dimers have been isolated. Of these, forty-two are completely phenanthrenic in nature. They are isolated from fourteen genera of different plants belonging to only five families, of which Orchidaceae is the most abundant source. Other nine completely acetylated and five methylated dimers were also defined, which were effective in establishing the position of the free hydroxyls of the corresponding natural products, from which they were obtained by semi-synthesis. Structurally, they could be useful chemotaxonomic markers considering that some substituents are typical of a single-family, such as the vinyl group for Juncaceae. From a biogenetic point of view, it is thought that these compounds derive from the radical coupling of the corresponding phenanthrenes or by dehydrogenation of the dihydrophenanthrenoid analogs. Phenanthrenes or dihydroderivatives possess different biological activities, e.g., antiproliferative, antimicrobial, anti-inflammatory, antioxidant, spasmolytic, anxiolytic, and antialgal effects. The aim of this review is to summarize the occurrence of phenanthrene dimers in the different natural sources and give a comprehensive overview their structural characteristics and biological activities.

Crosslinking Behavior of UV-Cured Polyorganosilazane as Polymer-Derived Ceramic Precursor in Ambient and Nitrogen Atmosphere

Polymer-derived ceramics (PDCs) based on silicon precursor represent an outstanding material for ceramic coatings thanks to their extraordinary versatile processibility. A promising example of a silicone precursor, polyorganosilazane (Durazane 1800), was studied concerning its crosslinking behavior by mixing it with three different photoinitiators, and curing it by two different UV-LED sources under both nitrogen and ambient atmosphere. The chemical conversion during polymerization and pyrolysis was monitored by FTIR spectroscopy. Pyrolysis was performed in a nitrogen atmosphere at 950 °C. The results demonstrate that polyorganosilazane can be cured by the energy-efficient UV-LED source at room temperature in nitrogen and ambient atmosphere. In nitrogen atmosphere, already common reactions for polysilazanes, including polyaddition of the vinyl group, dehydrogenation reactions, hydrosilylation, and transamination reaction, are responsible for crosslinking. Meanwhile, in ambient atmosphere, hydrolysis and polycondensation reactions occur next to the aforementioned reactions. In addition, the type of photoinitiator has an influence on the conversion of the reactive bonds and the chemical composition of the resulting ceramic. Furthermore, thermogravimetric analysis (TGA) was conducted in order to measure the ceramic yield of the cured samples as well as to study their decomposition. The ceramic yield was observed in the range of 72 to 78% depending on the composition and the curing atmosphere. The curing atmosphere significantly impacts the chemical composition of the resulting ceramics. Depending on the chosen atmosphere, either silicon carbonitride (SiCN) or a partially oxidized SiCN(O) can be produced.

USING QUANTUM-CHEMICAL PARAMETERS FOR PREDICTING ANTIRADICAL (HO•) ACTIVITY OF RELATED STRUCTURES CONTAINING A CINNAMOIL FRAGMENT. IV. STRUCTURE-ACTIVITY RELATIONSHIP BETWEEN UNSATURATION INDICES AND FLAVONE DERIVATIVES WITH FLOROGLUCIN RING “A”

The quantum-chemical parameters of 52 derivatives related to flavanones, flavanonoles, flavones and flavonoles with a phloroglucinic type of the A ring and containing electron-donating substituents in the B ring were studied.The aim is the analysis of the dynamics of changes in the electron density, bond numbers, free valence indices and unsaturation indices on carbon atoms C-7 → C-8 of the vinyl group of the main conjugation chain in relation to the position and number of substituents in the “B” ring and the type of the pharmacological activity.Materials and methods. The quantum-chemical parameters of the 4 analyzed groups of the compounds, have been calculated by the semi-empirical method PM7 (WinMopac 2016 program) on the workstation with an Intel Xeon E5-1620 3.5 GHz processor, 20 GB of RAM.Results and discussion. When comparing the quantum chemical parameters of the analyzed compounds, it was established that when the C-7 → C-8 multiple bond is formed, the free valency and unsaturation indices increase on both carbon atoms of the vinylene group in flavones and flavonols compared to the corresponding flavanones and flavanonols. This is explained by the fact that the value of the bond numbers Nµ on these atoms, on the contrary, decreases (Fµ = 4.732-Nµ). The transition from flavanone to flavone is accompanied by the formation of a vinyl group C-7 → C-8, and therefore both atoms from the sp3-hybridized state go into the sp2-state. The consequence of this transformation is a change in the electronegativity value and an increase in the unsaturation index of C-7 and C-8 atoms: C sp3 = 2.5; Csp2 = 2.8. At the same time, the transition from flavanone to flavone leads to the formation of a conjugated system with the participation of π-electrons of the aromatic system “B”, C-7, C-8 atoms and the carbonyl group, which is commonly called the “main conjugation chain”. These structural changes, namely, the transition from a less oxidized flavanone to a more oxidized flavone, contribute to a decrease in the electron density on C-7 and C-8 atoms, and an increase in the total unsaturation of the molecules in general. Mulliken charges on C-7 of all groups of compounds are characterized by a positive value. As for the carbon atoms of the B fragment, the following features are revealed here: in the presence of one substituent -OH or -OCH3 on the carbon atom to which the substituent is bounded, the Mulliken charge is positive; if there are two substituents in the B ring -OH or -OCH3, as well as two -OCH3 groups, then the carbon atoms bonded to the indicated substituents also have a positive Mulliken charge; in the case of trihydroxy substituted in the C-2, C-3 and C-4 B ring, all three carbon atoms are characterized by a positive Mulliken charge; if there are methoxy groups in positions C-2, C-3 and C-4, then the positive Mulliken charge is concentrated only on C-2 and C-4 atoms, and on C-3 atom this charge has a negative value.Conclusion. The above data on the quantum-chemical parameters of the main conjugation chain indicate that the transition of C-7 and C-8 atoms to the sp2-hybrid state, leads to a decrease in the electron density and a decrease in the bond numbers, with a simultaneous increase in the indices of unsaturation and free valence on these atoms. Thus, the trigger mechanism of the anti-radical activity, primarily with respect to the HO • radical, is determined by the fact that this particle, electrophilic in its properties, will attach in the C-8 atom during an initial attack.

Distribution and Functional Analysis of the Two Types of 8-vinyl Reductase Involved in Chlorophyll Biosynthesis in Marine Cyanobacteria

In the chlorophyll biosynthesis pathway, the 8-vinyl group of the chlorophyll precursor is reduced to an ethyl group by 8-vinyl reductase. Two isozymes of 8-vinyl reductase have been described in oxygenic photosynthetic organisms: one encoded by BciA and another by BciB. Only BciB contains an [Fe-S] cluster and most cyanobacteria harbor this form; whereas a few contain BciA. Given this disparity in distribution, cyanobacterial BciA has remained largely overlooked, which has limited understanding of chlorophyll biosynthesis in these microorganisms. Here, we reveal that cyanobacterial BciA encodes a functional 8-vinyl reductase, as evidenced by measuring the in vitro activity of recombinant Synechococcus and Acaryochloris BciA. Genomic comparison revealed that BciB had been replaced by BciA during evolution of the marine cyanobacterium Synechococcus, and coincided with replacement of Fe-superoxide dismutase (SOD) with Ni-SOD. These findings imply that the acquisition of BciA confers an adaptive advantage to cyanobacteria living in low-iron oceanic environments.

Vinyl-Functionalized Janus Ring Siloxane: Potential Precursors to Hybrid Functional Materials

A vinyl-functionalized all-cis-tetrasiloxycyclotetrasiloxane [ViSi(OSiMe2H)O]4 (Vi = vinyl group) Janus precursor was prepared from potassium cyclotetrasiloxane silanolate. The Janus precursor was selectively modified at its dimethylhydrosilyl groups [–SiMe2H] via the Piers–Rubinsztajn reaction to obtain a family of new tetravinyl-substituted Janus rings [ViSi(OR’)O]4 containing various functional groups in moderate yields. Remarkably, the tetravinyl groups on the structure remained intact after modification by the Piers–Rubinsztajn reaction. Since these synthesized compounds possess multiple functional groups (up to eight per molecule), they are potential precursors for advanced hybrid organic-inorganic functional materials.

Synthesis of 2,24-Diene-12,13,15,16,34,35,37,38-octaphenyl[4.4]triphenylparacyclophane

A new octaphenyl[4.4]triphenylparacyclophanediene was readily synthesized in six steps from p-xylene via the installment of bromine atoms, replacement with a vinyl group, carbonylative coupling, intermolecular followed by intramolecular double Grubbs olefin metathesis, Knoevenagel condensation, and Diels–Alder cycloaddition. The belt-shaped structure and trans-stereochemistry of the alkene moieties of the octaphenyl[4.4]triphenylparacyclophane and a synthetic intermediate, 2,21-dioxo-11,30-diene[3.4.3.4]paracyclophane, were determined by X-ray crystallography. The synthetic methodology leading to octaphenyl[4.4]triphenylparacyclophane is applicable for the synthesis of substituted triphenylparacyclophanes and possibly their corresponding bis-hexabenzocoronenylparacyclophanes via a Scholl–Mullen oxidative aryl-aryl coupling reaction.

Juncaceae Species as Promising Sources of Phenanthrenes: Antiproliferative Compounds from Juncus maritimus Lam

Juncaceae family represents an abundant source of phenanthrenes. In continuation of our work aiming at the isolation of biologically active compounds from Juncaceae species, Juncus maritimus Lam. was subjected to phytochemical and pharmacological investigations. The isolation process was carried out by using combined extraction and chromatographic methods. The structures of the obtained chemical compounds were elucidated by spectroscopic analysis, including HRESIMS, 1D (1H, 13C-JMOD), and 2D (1H-1H-COSY, HSQC, HMBC, NOESY) NMR spectra. Four new [maritins A–D (1–4)] and seven known phenanthrenes (5–11) were isolated from the plant, of which two (4 and 11) are phenanthrene dimers composed of effusol monomers. Maritin C (3) has an unusual 4,5-ethanophenanthrene skeleton most likely produced by biosynthetic incorporation of a vinyl group into a cyclohexadiene ring. Compounds 1–11 were tested for their antiproliferative activity on seven human tumor cell lines (HeLa, HTM-26, T-47D, A2780, A2780cis, MCF-7, KCR) and one normal cell line (MRC-5) using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The dimeric phenanthrenes showed strong antiproliferative activity against T-47D cells with IC50 values of 9.1 and 6.2 µM, respectively.

Synthesis of a Biodegradable Polymer of Poly (Sodium Alginate/Ethyl Acrylate)

The objective of the study was to obtain a new biodegradable graft polymer by performing two chemical processes: first, a transesterification reaction between carboxylic acid’s salt and ethyl acrylate’s ester, followed by polymerization of the vinyl group from the ethyl acrylate monomer via free radicals. The copolymer’s FTIR shows an absence of ethyl bands, while the characteristic band of pyranose is maintained, which confirms the monomer’s graft. TGA analysis shows that sodium alginate had three decomposition temperatures: 103 °C due to dehydration, 212 °C associated with the destruction of glycosidic bonds, and 426 °C due to conversion of alginate into Na2CO3. The copolymer presents four processes at different temperatures, i.e., evaporation of alcohol at 65 °C, decomposition of ungrafted alginate at 220 °C, copolymer decomposition at 298 °C, and degradation of fragments into carbonate at 423 °C. The evaluation of the action of fungal growth on the copolymer was higher than 50%, which means it is an excellent material to be biodegraded.