Application of Wind Profiler Radar in Guided Missile Range Experiment

2015 ◽  
Vol 713-715 ◽  
pp. 668-671
Author(s):  
Qing Yang ◽  
Ya Ke Wu ◽  
Zhao Yang
Keyword(s):  
Meteorological Data ◽  
Measurement Range ◽  
Horizontal Wind ◽  
Wind Profiler ◽  
Horizontal Wind Speed ◽  
Application Range ◽  
Testing Environment ◽  
Test Application ◽  
Wind Profiler Radar ◽  
Range Test

The high altitude meteorological data is the basic parameters for weapon system trajectory calculation, firing ballistic correction, and ballistic standardization. Measurement range weapon testing is essential to evaluate the final results, so it is accurate or not will directly influence the test. This paper outlines the wind profiler radar in guided missile range experiment and the necessity of working mechanism, and gives the testing environment of radar range test application and erection of wind profiles and parameter setting, finally derived horizontal wind speed measurement precision, theoretical radial velocity measurement accuracy, as well as the theoretical horizontal wind. Making the range test of wind profiler radar measured data can fit the fast and the theoretical solution of data, in order to test application range stroke profile radar has a more comprehensive understanding, and application of more mature and rational.

Characteristics Analysis of Wind Components according to the Typhoon Track Influenced in the Korean Peninsula Using a Wind Profiler Radar

2021 ◽  
Author(s):  
Min-Joung Joung ◽  
Sung-Ho Suh ◽  
Dong-In Lee
Keyword(s):  
Korean Peninsula ◽  
Heavy Precipitation ◽  
Horizontal Wind ◽  
Wind Profiler ◽  
Observation Data ◽  
Regression Equations ◽  
Strong Wind ◽  
Typhoon Track ◽  
Wind Profiler Radar ◽  
Components Analysis

<p> </p><p> Typhoon is a tropical cyclone accompanied by strong wind and heavy precipitation. It induces high human and property damages depending on typhoon track. The typhoon influenced in the Korean Peninsula mainly passes through Jeju Island and the Southern costal area from northward the East China Sea. In this study, wind components analysis using a wind profiler radar close to the shoreline is conducted. The wind profiler radar observes the three-dimensional wind components for a fixed-point regardless of precipitation and provides high-resolution (10 min., 100 m) data for continuous analysis. The wind characteristics according to the typhoon track was investigated using the Boseong wind profiler radar (34.76 °N, 127.21 °E) located on the south coast in Korea.</p><p> Some cases were selected as typhoons that occurred in 2010 (Dianmu, Kompasu, Malou), 2011 (Meari, Muifa) and 2012 (Khanun). For the horizontal wind analysis, there were distributed the preprocessed zonal (U) and meridional (V) wind components with time. As a result, the shape of the scatter plot and their distribution characteristics were differently shown according to the typhoon track. Dianmu and Malou had circle-shape and distributed similarly over time, however Muifa, Meari, Kompasu and Khanun displayed the line-shape, relatively. Their differences were confirmed through the quadratic regression equations by each typhoon track. In addition, the amount of change in U and V was analyzed in time series.</p><p> These wind components analysis using ground-based observation data are expected to be applied for typhoon track analysis, prediction and natural disaster prevention.</p>

scholarly journals Assessment of virtual towers performed with scanning wind lidars and Ka-band radars during the XPIA experiment

2016 ◽  
Author(s):  
Mithu Debnath ◽  
G. Valerio Iungo ◽  
W. Alan Brewer ◽  
Aditya Choukulkar ◽  
Ruben Delgado ◽  
...  
Keyword(s):  
Sonic Anemometer ◽  
Great Accuracy ◽  
Horizontal Wind ◽  
Wind Profiler ◽  
Horizontal Wind Speed ◽  
Ka Band ◽  
Radar Measurements ◽  
Remote Sensing Techniques ◽  
Sonic Anemometer Data ◽  
Scanning Strategies

Abstract. During the eXperimental Planetary boundary layer Instrumentation Assessment (XPIA) campaign, which was carried out at the Boulder Atmospheric Observatory (BAO) in spring 2015, multiple-Doppler scanning strategies were performed with scanning wind lidars and Ka-band radars. Specifically, step-stare measurements were performed simultaneously with three scanning Doppler lidars, while two scanning Ka-band radars performed simultaneous range height indicator (RHI) scans. The XPIA experiment provided the unique opportunity to compare directly virtual tower measurements performed simultaneously with Ka-band radars and Doppler wind lidars. Furthermore, multiple-Doppler measurements were assessed against sonic anemometer data acquired from the met-tower present at the BAO site and a lidar wind profiler. This survey shows that despite the different technologies, measurement volumes and sampling periods used for the lidar and radar measurements, a great accuracy is achieved for both remote sensing techniques for probing horizontal wind speed and wind direction with the virtual tower scanning technique.

scholarly journals Wind shear over the Nice Côte d'Azur airport: case studies

2013 ◽  
Vol 13 (9) ◽  
pp. 2223-2238 ◽  
Author(s):  
A. Boilley ◽  
J.-F. Mahfouf
Keyword(s):  
Numerical Simulation ◽  
Numerical Model ◽  
Numerical Simulations ◽  
Wind Shear ◽  
Horizontal Wind ◽  
Wind Profiler ◽  
Measurement Campaign ◽  
Wind Lidar ◽  
Real Time Applications ◽  
Wind Shears

Abstract. The Nice Côte d'Azur international airport is subject to horizontal low-level wind shears. Detecting and predicting these hazards is a major concern for aircraft security. A measurement campaign took place over the Nice airport in 2009 including 4 anemometers, 1 wind lidar and 1 wind profiler. Two wind shear events were observed during this measurement campaign. Numerical simulations were carried out with Meso-NH in a configuration compatible with near-real time applications to determine the ability of the numerical model to predict these events and to study the meteorological situations generating an horizontal wind shear. A comparison between numerical simulation and the observation dataset is conducted in this paper.

scholarly journals Aspects of quality control of wind profiler measurements in complex topography

2014 ◽  
Vol 7 (1) ◽  
pp. 135-148 ◽  
Author(s):  
M. Maruri ◽  
J. A. Romo ◽  
L. Gomez
Keyword(s):  
Complex Terrain ◽  
Meteorological Conditions ◽  
Complex Signal ◽  
Wind Profiler ◽  
Complex Topography ◽  
Homogeneity Study ◽  
Homogeneity Assumption ◽  
Patterns Of Behavior ◽  
Wind Profiler Radar ◽  
Wind Profiles

Abstract. It is well known in the scientific community that some remote sensing instruments assume that sample volumes present homogeneous conditions within a defined meteorological profile. At complex topographic sites and under extreme meteorological conditions, this assumption may be fallible depending on the site, and it is more likely to fail in the lower layers of the atmosphere. This piece of work tests the homogeneity of the wind field over a boundary layer wind profiler radar located in complex terrain on the coast under different meteorological conditions. The results reveal the qualitative importance of being aware of deviations in this homogeneity assumption and evaluate its effect on the final product. Patterns of behavior in data have been identified in order to simplify the analysis of the complex signal registered. The quality information obtained from the homogeneity study under different meteorological conditions provides useful indicators for the best alternatives the system can offer to build wind profiles. Finally, the results are also to be considered in order to integrate them in a quality algorithm implemented at the product level.

scholarly journals Characteristics of Large-Scale Orographic Precipitation in a Linear Perspective

2011 ◽  
Vol 12 (1) ◽  
pp. 27-44 ◽  
Author(s):  
Michael Kunz
Keyword(s):  
Time Scales ◽  
Characteristic Time ◽  
Large Scale ◽  
Linear Perspective ◽  
Horizontal Wind ◽  
Small Scale ◽  
Orographic Precipitation ◽  
Observation Data ◽  
Horizontal Wind Speed ◽  
Precipitation Patterns

Abstract Simulations of orographic precipitation over the low mountain ranges of southwestern Germany and eastern France with two different physics-based linear precipitation models are presented. Both models are based on 3D airflow dynamics from linear theory and consider advection of condensed water and leeside drying. Sensitivity studies for idealized conditions and a real case study show that the amount and spatial distribution of orographic precipitation is strongly controlled by characteristic time scales for cloud and hydrometeor advection and background precipitation due to large-scale lifting. These parameters are estimated by adjusting the model results on a 2.5-km grid to observed precipitation patterns for a sample of 40 representative orography-dominated stratiform events (24 h) during a calibration period (1971–80). In general, the best results in terms of lowest rmse and bias are obtained for characteristic time scales of 1600 s and background precipitation of 0.4 mm h−1. Model simulations of a sample of 84 events during an application period (1981–2000) with fixed parameters demonstrate that both models are able to reproduce quantitatively precipitation patterns obtained from observations and reanalyses from a numerical model [Consortium for Small-scale Modeling (COSMO)]. Combining model results with observation data shows that heavy precipitations over mountains are restricted to situations with strong atmospheric forcings in terms of synoptic-scale lifting, horizontal wind speed, and moisture content.

scholarly journals Combined wind profiler-weather radar observations of orographic rainband around Kyushu, Japan in the Baiu season

2004 ◽  
Vol 22 (11) ◽  
pp. 3971-3982 ◽  
Author(s):  
Y. Umemoto ◽  
M. Teshiba ◽  
Y. Shibagaki ◽  
H. Hashiguchi ◽  
M. D. Yamanaka ◽  
...  
Keyword(s):  
Weather Radar ◽  
Horizontal Wind ◽  
Wind Component ◽  
Wind Profiler ◽  
Strong Wind ◽  
Clockwise Rotation ◽  
Weather Radars ◽  
X Band ◽  
Western Japan ◽  
Lifting Condensation Level

Abstract. A special observation campaign (X-BAIU), using various instruments (wind profilers, C-band weather radars, X-band Doppler radars, rawinsondes, etc.), was carried out in Kyushu (western Japan) during the Baiu season, from 1998 to 2002. In the X-BAIU-99 and -02 observations, a line-shaped orographic rainband extending northeastward from the Koshikijima Islands appeared in the low-level strong wind with warm-moist airs. The weather radar observation indicated that the rainband was maintained for 11h. The maximum length and width of the rainband observed in 1999 was ~200km and ~20km, respectively. The rainband observed in 2002 was not so developed compared with the case in 1999. The Froude number averaged from sea level to the top of the Koshikijima Islands (~600m) was large (>1), and the lifting condensation level was below the tops of the Koshikijima Islands. Thus, it is suggested that the clouds organizing the rainband are formed by the triggering of the mountains on the airflow passing over them. The vertical profile of horizontal wind in/around the rainband was investigated in the wind profiler observations. In the downdraft region 60km from the Koshikijima Islands, strong wind and its clockwise rotation with increasing height was observed below 3km altitude. In addition, a strong wind component perpendicular to the rainband was observed when the rainband was well developed. These wind behaviors were related to the evolution of the rainband.

scholarly journals Doppler wind lidar activities at Cabauw

2021 ◽  
Author(s):  
Steven Knoop ◽  
Fred Bosveld ◽  
Marijn de Haij ◽  
Arnoud Apituley
Keyword(s):  
Wind Speed ◽  
Wind Profile ◽  
Continuous Wave ◽  
Wind Farms ◽  
Data Availability ◽  
Horizontal Wind ◽  
Horizontal Wind Speed ◽  
Low Clouds ◽  
Wind Measurements ◽  
Wind Lidar

<p>Atmospheric motion and turbulence are essential parameters for weather and topics related to air quality. Therefore, wind profile measurements play an important role in atmospheric research and meteorology. One source of wind profile data are Doppler wind lidars, which are laser-based remote sensing instruments that measure wind speed and wind direction up to a few hundred meters or even a few kilometers. Commercial wind lidars use the laser wavelength of 1.5 µm and therefore backscatter is mainly from aerosols while clear air backscatter is minimal, limiting the range to the boundary layer typically.</p><p>We have carried out a two-year intercomparison of the ZephIR 300M (ZX Lidars) short-range wind lidar and tall mast wind measurements at Cabauw [1]. We have focused on the (height-dependent) data availability of the wind lidar under various meteorological conditions and the data quality through a comparison with in situ wind measurements at several levels in the 213m tall meteorological mast. We have found an overall availability of quality-controlled wind lidar data of 97% to 98 %, where the missing part is mainly due to precipitation events exceeding 1 mm/h or fog or low clouds below 100 m. The mean bias in the horizontal wind speed is within 0.1 m/s with a high correlation between the mast and wind lidar measurements, although under some specific conditions (very high wind speed, fog or low clouds) larger deviations are observed. This instrument is being deployed within North Sea wind farms.</p><p>Recently, a scanning long-range wind lidar Windcube 200S (Leosphere/Vaisala) has been installed at Cabauw, as part of the Ruisdael Observatory program [2]. The scanning Doppler wind lidars will provide detailed measurements of the wind field, aerosols and clouds around the Cabauw site, in coordination with other instruments, such as the cloud radar.</p><p>[1] Knoop, S., Bosveld, F. C., de Haij, M. J., and Apituley, A.: A 2-year intercomparison of continuous-wave focusing wind lidar and tall mast wind measurements at Cabauw, Atmos. Meas. Tech., 14, 2219–2235, 2021</p><p>[2] https://ruisdael-observatory.nl/</p>

scholarly journals Comparison of Large Eddy Simulations of a convective boundary layer with wind LIDAR measurements

2012 ◽  
Vol 8 (1) ◽  
pp. 83-86 ◽  
Author(s):  
J. G. Pedersen ◽  
M. Kelly ◽  
S.-E. Gryning ◽  
R. Floors ◽  
E. Batchvarova ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Geostrophic Wind ◽  
Large Eddy Simulations ◽  
Horizontal Wind ◽  
Convective Boundary ◽  
Horizontal Wind Speed ◽  
Large Eddy ◽  
Lidar Measurements ◽  
Wind Lidar

Abstract. Vertical profiles of the horizontal wind speed and of the standard deviation of vertical wind speed from Large Eddy Simulations of a convective atmospheric boundary layer are compared to wind LIDAR measurements up to 1400 m. Fair agreement regarding both types of profiles is observed only when the simulated flow is driven by a both time- and height-dependent geostrophic wind and a time-dependent surface heat flux. This underlines the importance of mesoscale effects when the flow above the atmospheric surface layer is simulated with a computational fluid dynamics model.

scholarly journals Wind profile correction algorithm based on Atmospheric Boundary Layer stability profile

2021 ◽  
Author(s):  
Francisco Albuquerque Neto ◽  
Vinicius Almeida ◽  
Julia Carelli
Keyword(s):  
Boundary Layer ◽  
Atmospheric Boundary Layer ◽  
Wind Profile ◽  
Horizontal Wind ◽  
Boundary Layer Stability ◽  
Correction Algorithm ◽  
Horizontal Wind Speed ◽  
Study Region ◽  
Profile Correction ◽  
Wind Profiles

<p>In recent years, the use of radar wind profilers (RWP) at airports has grown significantly with the aim of supporting decision makers to maintain the safety of aircraft landings and takeoffs.</p><p>The RWP provide vertical profiles of averaged horizontal wind speed and direction and vertical wind velocity for the entire Atmospheric Boundary Layer (ABL) and beyond. In addition, RWP with Radio-Acoustic Sounding System (RASS) are able to retrieve virtual temperature profiles in the ABL.</p><p>RWP data evaluation is usually based on the so-called Doppler Beam Swinging method (DBS) which assumes homogeneity and stationarity of the wind field. Often, transient eddies violate this homogeneity and stationarity requirement. Hence, incorrect wind profiles can relate to transient eddies and present a problem for the forecast of high-impact weather phenomena in airports. This work intends to provide a method for removing outliers in such profiles based on historical data and other variables related to the Atmospheric Boundary Layer stability profile in the study region.</p><p>For this study, a dataset of almost one year retrieved from a RWP LAP3000 with RASS Extension is used for a wind profile correction algorithm development.</p><p>The algorithm consists of the detection of outliers in the wind profiles based on the thermodynamic structure of the ABL and the generation of the corrected profiles.</p><p>Results show that the algorithm is capable of identifying and correcting unrealistic variations in speed caused by transient eddies. The method can be applied as a complement to the RWP data processing for better data reliability.</p><p> </p><p>Keywords: atmospheric boundary layer; stability profile; wind profile</p>

Sign in / Sign up

Export Citation Format

Share Document