scholarly journals Analysis of Sound Produced by a Traditional Malay Musical Instrument “Kompang”

2015 ◽  
Vol 773-774 ◽  
pp. 53-57
Author(s):  
Al Emran Ismail ◽  
K.A. Arif ◽  
Musli Nizam Yahya ◽  
Waluyo Adi Siswanto ◽  
Ismail Nawi
Keyword(s):  
Sound Quality ◽  
Musical Instrument ◽  
Sound Frequency ◽  
X Ray ◽  
Different Types ◽  
Animal Skin

This paper presents frequency analyses of sounds produced by traditional Malay musical instrument “kompang”. Kompang is used to produce exotic sound especially certain grand ceremony. In order to produce sound, different types of skins are used especially made from polymer (used x-ray film) and animal skins. However, the sound produced by a polymeric skin is not similar with the sound produced using an animal skin. Therefore, this present work investigated the effect of such skins on the sound produced and as a result affecting the sound quality. Appropriated software is used to conduct the frequency analyses in order to investigate whether the polymeric skin can be a replaceable skin in replacing an animal skin. It is found two different skin materials have their own sound characteristics and it is also indicated that lower peak sound frequency produced by animal skin compared with the polymeric skin.

THE SOUND OF THE "GOLDEN AGE": PROBLEMS IN PERFORMING ENGLISH VIRGINAL ART

2020 ◽  
Vol 1 (3) ◽  
pp. 104-114
Author(s):  
O. A. Krasnogorova ◽  
Keyword(s):  
Golden Age ◽  
Sound Quality ◽  
Musical Instrument ◽  
Decisive Influence ◽  
Different Types ◽  
History Of ◽  
English Composers ◽  
Historical Instruments

The main objective of the article is to investigate the problems of performing compositions by English composers of the XVIth – XVIIth centuries and the history of their sound incarnation. The author analyzes the appeal to the musical art of the "Golden Age" by A. G. Rubinstein, who included in the piano "Historical Concerts" and lectures works by W. Byrd, O. Gibbons, H. Purcell. Considering the specifics of the clavier texture, different types of variations and their influence on the development of instrumental techniques are distinguished. Based on the comparison of the pavane, the article draws conclusions about the stylistic features of various composers. As one of the key problems in creating an interpretation, the author notes the solution to the question of choosing a musical instrument (both between harpsichord and piano and between historical instruments), which has a decisive influence on sound quality. The article examines the experience of A. B. Lyubimov in performing works by English virginalists. Interpreted by G. Gould, the pianist emphasizes the new contemporary hearing of compositions by W. Byrd and O. Gibbons, performed in the same program with the works of A. Schoenberg, A. Webern, A. Berg, which reveals the dialogue of eras.

Identification of Asbestos Fibres in a Water Sample by X-Ray Microanalysis

1975 ◽  
Vol 33 ◽  
pp. 274-275
Author(s):  
K. A. Brookes ◽  
D. Finbow ◽  
Madeleine Samuel
Keyword(s):  
Water Sample ◽  
Background Radiation ◽  
X Ray ◽  
Left Hand ◽  
Transmission Imaging ◽  
Different Types ◽  
Normal Specimen ◽  
Liquid Nitrogen Cooling ◽  
Normal Transmission ◽  
Additional Port

Investigation of the particulate matter contained in the water sample, revealed the presence of a number of different types and certain of these were selected for analysis.An A.E.I. Corinth electron microscope was modified to accept a Kevex Si (Li) detector. To allow for existing instruments to be readily modified, this was kept to a minimum. An additional port is machined in the specimen region to accept the detector, with the liquid nitrogen cooling dewar conveniently housed in the left hand cupboard adjacent to the microscope column. Since background radiation leads to loss in the sensitivity of the instrument, great care has been taken to reduce this effect by screening and manufacturing components that are near the specimen from material of low atomic number. To change from normal transmission imaging to X-ray analysis, the special 4-position specimen rod is inserted through the normal specimen airlock.

scholarly journals Synthesis and Characterization of Clay Polymer Nanocomposites of P(4VP-co-AAm) and Their Application for the Removal of Atrazine

Polymers ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 721 ◽  
Author(s):  
Jorge A. Ramírez-Gómez ◽  
Javier Illescas ◽  
María del Carmen Díaz-Nava ◽  
Claudia Muro-Urista ◽  
Sonia Martínez-Gallegos ◽  
...  
Keyword(s):  
Polymer Nanocomposites ◽  
Nanocomposite Materials ◽  
Synthesis And Characterization ◽  
Cross Linking ◽  
X Ray Diffraction ◽  
Numerous Species ◽  
X Ray ◽  
Different Types ◽  
Synthesized Materials

Atrazine (ATZ) is an herbicide which is applied to the soil, and its mechanism of action involves the inhibition of photosynthesis. One of its main functions is to control the appearance of weeds in crops, primarily in corn, sorghum, sugar cane, and wheat; however, it is very toxic for numerous species, including humans. Therefore, this work deals with the adsorption of ATZ from aqueous solutions using nanocomposite materials, synthesized with two different types of organo-modified clays. Those were obtained by the free radical polymerization of 4-vinylpyridine (4VP) and acrylamide (AAm) in different stoichiometric ratios, using tetrabutylphosphonium persulfate (TBPPS) as a radical initiator and N,N′-methylenebisacrylamide (BIS) as cross-linking agent. The structural, morphological, and textural characteristics of clays, copolymers, and nanocomposites were determined through different analytical and instrumental techniques, i.e., X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). Adsorption kinetics experiments of ATZ were determined with the modified and synthesized materials, and the effect of the ratio between 4VP and AAm moieties on the removal capacities of the obtained nanocomposites was evaluated. Finally, from these sets of experiments, it was demonstrated that the synthesized nanocomposites with higher molar fractions of 4VP obtained the highest removal percentages of ATZ.

scholarly journals Microwave-Assisted Fabrication of Mesoporous Silica-Calcium Phosphate Composites for Dental Application

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 53
Author(s):  
Adrian Szewczyk ◽  
Adrianna Skwira ◽  
Marta Ginter ◽  
Donata Tajer ◽  
Magdalena Prokopowicz
Keyword(s):  
Calcium Phosphate ◽  
Mesoporous Silica ◽  
Octacalcium Phosphate ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
Coating Solution ◽  
X Ray ◽  
Microwave Assisted ◽  
Calcium Orthophosphates ◽  
Different Types

Herein, the microwave-assisted wet precipitation method was used to obtain materials consisting of mesoporous silica (SBA-15) and calcium orthophosphates (CaP). Composites were prepared through immersion of mesoporous silica in different calcification coating solutions and then exposed to microwave radiation. The composites were characterized in terms of molecular structure, crystallinity, morphology, chemical composition, and mineralization potential by Fourier-transform infrared spectroscopy (FTIR), powder X-ray diffraction (XRD), and scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy (SEM-EDX). The application of microwave irradiation resulted in the formation of different types of calcium orthophosphates such as calcium deficient hydroxyapatite (CDHA), octacalcium phosphate (OCP), and amorphous calcium phosphate (ACP) on the SBA-15 surface, depending on the type of coating solution. The composites for which the progressive formation of hydroxyapatite during incubation in simulated body fluid was observed were further used in the production of final pharmaceutical forms: membranes, granules, and pellets. All of the obtained pharmaceutical forms preserved mineralization properties.

scholarly journals Measuring the supermassive black hole parameters with space missions

2006 ◽  
Vol 2 (S238) ◽  
pp. 475-476
Author(s):  
Alexander F. Zakharov
Keyword(s):  
Black Hole ◽  
Spectral Line ◽  
Accretion Disks ◽  
Seyfert Galaxies ◽  
Emission Lines ◽  
X Ray ◽  
Line Shapes ◽  
Supermassive Black Hole ◽  
Broad Emission ◽  
Different Types

AbstractRecent X-ray observations of microquasars and Seyfert galaxies reveal broad emission lines in their spectra, which can arise in the innermost parts of accretion disks. Recently Müller & Camenzind (2004) classified different types of spectral line shapes and described their origin. Zakharov (2006b) clarified their conclusions about an origin of doubled peaked and double horned line shapes in the framework of a radiating annulus model and discussed s possibility to evaluate black hole parameters analyzing spectral line shapes.

Determination of crystallinity of Chinese handmade papers by means of X-ray diffraction

2020 ◽  
Vol 41 (2) ◽  
pp. 69-86
Author(s):  
Peng Liu ◽  
Hongbin Zhang ◽  
Sinong Wang ◽  
Hui Yu ◽  
Bingjie Lu ◽  
...  
Keyword(s):  
Negative Influence ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
X Ray ◽  
Eulaliopsis Binata ◽  
Different Types ◽  
Powder Samples ◽  
Xrd Patterns ◽  
Xrd Method

AbstractThe crystallinity indices (CrI) of Chinese handmade papers were investigated using the X-ray diffraction (XRD) method. Four Chinese handmade papers, Yingchun, Zhuma, Yuanshu and Longxucao papers were used as model substrates of mulberry bark, ramie, bamboo and Eulaliopsis binata papers, respectively. Two forms of the paper samples, paper sheets and their comminuted powders, were used in this study. The results showed that their XRD patterns belong to the cellulose-I type and Iβ dominates the cellulose microstructure of these paper samples. Moreover, it was found that the microstructures and CrIs of cellulose of these papers were changed by the grinding treatment. This work suggested that the sheet form of the handmade papers is suitable to determine CrI by XRD, despite the contribution of non-cellulosic components in the papers. The order of CrIs for these paper sheet samples was Yingchun, Zhuma, Longxucao and Yuanshu papers. Besides CrIs, differences in cross-sectional areas of the crystalline zone of cellulose can be used for comparing different types of handmade papers. It was also found that the CrIs and crystallite size of paper cellulose varied between the sheet samples and the powder samples, illustrating that the pulverisation has a negative influence on the microstructure of the handmade papers.

scholarly journals Chirality, Gelation Ability and Crystal Structure: Together or Apart? Alkyl Phenyl Ethers of Glycerol as Simple LMWGs

Symmetry ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 732
Author(s):  
Alexander A. Bredikhin ◽  
Aidar T. Gubaidullin ◽  
Zemfira A. Bredikhina ◽  
Robert R. Fayzullin ◽  
Olga A. Lodochnikova
Keyword(s):  
Self Assembly ◽  
Chiral Recognition ◽  
Soft Materials ◽  
Gelling Agent ◽  
Low Molecular Weight ◽  
X Ray Diffraction ◽  
X Ray ◽  
Different Types ◽  
Low Molecular Weight Gelators ◽  
Phenyl Ethers

Chiral recognition plays an important role in the self-assembly of soft materials, in particular supramolecular organogels formed by low molecular weight gelators (LMWGs). Out of 14 pairs of the studied racemic and enantiopure samples of alkyl-substituted phenyl ethers of glycerol, only eight enantiopure diols form the stable gels in nonane. The formation of gels from solutions was studied by polarimetry, and their degradation with the formation of xerogels was studied by the PXRD method. The revealed crystalline characteristics of all studied xerogels corresponded to those for crystalline samples of the parent gelators. In addition to those previously investigated, crystalline samples of enantiopure para-n-alkylphenyl glycerol ethers [alkyl = pentyl (5), hexyl (6), heptyl (7), octyl (8), nonyl (9)] and racemic 3-(3,5-dimethylphenoxy)propane-1,2-diol (rac-14) have been examined by single crystal X-ray diffraction analysis. Among 22 samples of compounds 1-14 studied by SC-XRD, seven different types of supramolecular motifs are identified, of which only two are realized in crystals of supramolecular gelators. An attempt was made to relate the ability to gel formation with the characteristics of the supramolecular motif of a potential gelling agent, and the frequency of formation of the motif, required for gelation, with the chiral characteristics of the sample.

Effect of Surface Chemistry on Ruthenium Wet Etching

2021 ◽  
Vol 314 ◽  
pp. 302-306
Author(s):  
Quoc Toan Le ◽  
E. Kesters ◽  
M. Doms ◽  
Efrain Altamirano Sánchez
Keyword(s):  
Surface Roughness ◽  
Photoelectron Spectroscopy ◽  
Etching Rate ◽  
Wet Etching ◽  
X Ray ◽  
Force Microscopy ◽  
Metal Free ◽  
Atomic Force ◽  
Different Types ◽  
Effect Of Surface

Different types of ALD Ru films, including as-deposited, annealed Ru, without and with a subsequent CMP step, were used for wet etching study. With respect to the as-deposited Ru, the etching rate of the annealed Ru film in metal-free chemical mixtures (pH = 7-9) was found to decrease substantially. X-ray photoelectron spectroscopy characterization indicated that this behavior could be explained by the presence of the formation of RuOx (x = 2,3) caused by the anneal. A short CMP step applied to the annealed Ru wafer removed the surface RuOx, at least partially, resulting in a significant increase of the etching rate. The change in surface roughness was quantified using atomic force microscopy.

Sign in / Sign up

Export Citation Format

Share Document