Performance of Recycled Aggregate Containing POFA as Additives for Cement

2015 ◽  
Vol 802 ◽  
pp. 249-254
Author(s):  
A. Suraya Hani ◽  
Wan Mohd Haziman ◽  
Norwati Jamaluddin ◽  
Nurul Hazarine Zakaria
Keyword(s):  
Compressive Strength ◽  
Water Absorption ◽  
Palm Oil ◽  
Construction Material ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Hardened Concrete ◽  
Palm Oil Fuel Ash ◽  
Aggregate Concrete ◽  
The Government

Malaysia has been the largest producer and exporter of palm oil in the world, accounting for 52% of the total world oil in year 2006. The waste disposal problem from palm oil industry was increasing. In addition, the government also facing the problems when forced to allocate more landfill for the disposal of concrete waste. Nowadays, the by-product the palm oil mill has becoming potentially to be utilized as construction material in term as additives for cement. This paper discussed the water absorption and compressive strength of Recycled Aggregate Concrete (RAC) containing Palm Oil Fuel Ash (POFA). There are twelve (12) series of concrete mix containing POFA and recycled aggregate (RA) were used as additives for cement that have been indicated as POFA-0%, POFA-10%, POFA-20%, POFA-30% and RA-0%, RA-50% and RA-100%. The slump test was conducted to determine the performance of fresh concrete. The hardened concrete have been tested its compressive strength and water absorption of POFA-concretes at 7 and28 days of water curing ages. The results revealed that POFA-recycled aggregate concrete has lower water absorption and higher compressive strength comparedto recycled aggregate concrete without POFA. The optimum additional of POFA was 30% for concrete made with 100% natural aggregate (NA) produced higher compressive strength and lower water absorption.

scholarly journals Using Neural Networks to Determine the Significance of Aggregate Characteristics Affecting the Mechanical Properties of Recycled Aggregate Concrete

2018 ◽  
Vol 8 (11) ◽  
pp. 2171 ◽  
Author(s):  
Zhenhua Duan ◽  
Shaodan Hou ◽  
Chi-Sun Poon ◽  
Jianzhuang Xiao ◽  
Yun Liu
Keyword(s):  
Neural Networks ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Specific Gravity ◽  
Water Absorption ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Aggregate Concrete ◽  
Curing Age

It has been proved that artificial neural networks (ANN) can be used to predict the compressive strength and elastic modulus of recycled aggregate concrete (RAC) made with recycled aggregates from different sources. This paper is a further study of the use of ANN to analyze the significance of each aggregate characteristic and determine the best combinations of factors that would affect the compressive strength and elastic modulus of RAC. The experiments were carried out with 46 mixes with several types of recycled aggregates. The experimental results were used to build ANN models for compressive strength and elastic modulus, respectively. Different combinations of factors were selected as input variables until the minimum error was reached. The results show that water absorption has the most important effect on aggregate characteristics, further affecting the compressive strength of RAC, and that combined factors including concrete mixes, curing age, specific gravity, water absorption and impurity content can reduce the prediction error of ANN to 5.43%. Moreover, for elastic modulus, water absorption and specific gravity are the most influential, and the network error with a combination of mixes, curing age, specific gravity and water absorption is only 3.89%.

scholarly journals Utilisation of Recycled Aggregate as Coarse Aggregate in Concrete

2009 ◽  
Vol 1 (1) ◽  
pp. 1-6 ◽  
Author(s):  
Yong P.C. ◽  
Teo D.C.L
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Construction Material ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Concrete Aggregate ◽  
Normal Concrete ◽  
Aggregate Concrete

In this rapid industrialised world, recycling construction material plays an important role to preserve the natural resources. In this research, recycled concrete aggregates (RCA) from site-tested concrete specimens were used. These consist of 28-days concrete cubes after compression test obtained from a local construction site. These concrete cubes are crushed to suitable size and reused as recycled coarse aggregate. The amount of recycled concrete aggregate used in this research is approximately 200 kg. Many researchers state that recycled aggregates are only suitable for non-structural concrete application. This research, however, shows that the recycled aggregates that are obtained from site-tested concrete specimen make good quality concrete. The compressive strength of recycled aggregate concrete (RAC) is found to be higher than the compressive strength of normal concrete. Recycled aggregate concrete is in close proximity to normal concrete in terms of split tensile strength, flexural strength and wet density. The slump of recycled aggregate concrete is low and that can be improved by using saturated surface dry (SSD) coarse aggregate.

scholarly journals Feasibility of Using Nanoparticles of SiO2 to Improve the Performance of Recycled Aggregate Concrete

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Khaleel H. Younis ◽  
Shelan M. Mustafa
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Water Absorption ◽  
Splitting Tensile Strength ◽  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Demolition Waste ◽  
Aggregate Concrete ◽  
Natural Aggregate

The aim of this paper was to examine the feasibility of using nanoparticles of SiO2 (nanosilica) to improve the performance of recycled aggregate concrete (RAC) containing recycled aggregate (RA) derived from processing construction and demolition waste of concrete buildings. The examined properties include compressive strength, splitting tensile strength, and water absorption. The study also includes examining the microstructure of RA and RAC with and without nanoparticles of SiO2. In total, nine mixes were investigated. Two mixes with RA contents of 50% and 100% were investigated and for each RA content; three mixes were prepared with three different nanoparticles dosages 0.4%, 0.8%, and 1.2% (by mass of cement). A control mix with natural aggregate (NA) was also prepared for comparison reasons. The results show that nanoparticles of silica can improve the compressive strength, tensile strength, reduce the water absorption, and modify the microstructure of RAC.

Predicting Compressive Strength of Recycled Aggregate Concrete by Multiple Regression Analysis

2012 ◽  
Vol 253-255 ◽  
pp. 546-549 ◽  
Author(s):  
Yoon Seok Shin ◽  
Gwang Hee Kim
Keyword(s):  
Compressive Strength ◽  
Regression Analysis ◽  
Multiple Regression Analysis ◽  
Multiple Regression ◽  
Construction Industry ◽  
Multiple Regression Model ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Average Error ◽  
Aggregate Concrete

Today, efforts are underway in a number of areas to conserve the environment and protect natural resource. In the construction industry, many researchers have studied the development of new concrete using recycled aggregate (RA). This research proposes a multiple regression model (MRM) for predicting the compressive strength of recycled aggregate concrete (RAC). The compressive strength data of 85 specimens of RAC strengths were used for constructing and evaluating the prediction model. The average error rate of the constructed MRM evaluation is 7.18 percent. This result will be useful for predicting the compressive strength of RAC using multiple regression analysis.

Experimental Study on Compressive Strength of Recycled Aggregate Concrete

2008 ◽  
Vol 385-387 ◽  
pp. 381-384 ◽  
Author(s):  
Wei Wang ◽  
Hua Ling ◽  
Xiao Ni Wang ◽  
Tian Xia ◽  
Da Zhi Wang ◽  
...  
Keyword(s):  
Experimental Study ◽  
Compressive Strength ◽  
Coarse Aggregate ◽  
Recycled Aggregate Concrete ◽  
Time Dependent ◽  
Recycled Aggregate ◽  
Experimental Investigations ◽  
Aggregate Concrete ◽  
Cement Ratio ◽  
Practical Engineering

With the increase in the use of recycled aggregate concrete (RAC), it is necessary to clearly understand its behavior and characteristics. In this paper, experimental study on compressive strength of RAC with same water/cement ratio is conducted. Firstly, influence of recycled coarse aggregate contents on cube compressive strength of RAC is studied. Secondly, experiment on time-dependent strength developing process of RAC is conducted with different solidification ages. Finally, based on above experimental investigations, empirical formula for compress strengths of RAC with different ages is presented. The result of this paper is helpful to theoretical analysis and practical engineering design of RAC structures.

scholarly journals Effects of Imposed Damage on the Capillary Water Absorption of Recycled Aggregate Concrete

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Qi Gao ◽  
Zhiming Ma ◽  
Jianzhuang Xiao ◽  
Fuan Li
Keyword(s):  
Absorption Coefficient ◽  
Water Absorption ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Capillary Absorption ◽  
Capillary Water ◽  
Aggregate Concrete ◽  
Capillary Water Absorption ◽  
Freeze Thaw ◽  
Loading Level

Capillary water absorption of concrete is closely related to its pore structure, permeability, and durability. This paper intensively investigates the effects of imposed damage, including freeze-thaw damage and loading damage, on the capillary water absorption of recycled aggregate concrete (RAC). Freeze-thaw cycle test, loading test, and the experiment of capillary water absorption were carried out, respectively. The results demonstrate that the addition of recycled coarse aggregate (RCA) results in the increase in the capillary absorption behavior of RAC without imposed damage, and there exists a linear correlation between the behaviors of capillary water absorption and chloride penetration of RAC. The imposed freeze-thaw damage or load damage of RAC boosts with the increase of RCA replacement percentages after suffering the same freeze-thaw cycles or loading level. The imposed freeze-thaw damage and load damage further lead to the increase in the capillary water absorption of RAC, and the capillary absorption coefficient of RAC increases linearly with the increased RCA replacement percentages, after suffering the same freeze-thaw cycles or loading level. Furthermore, capillary absorption coefficient increases linearly with the growth of imposed freeze-thaw damage or load damage degree, which can be used to estimate the capillary absorption behavior of RAC exposed to the extreme environment.

Sign in / Sign up

Export Citation Format

Share Document