Smart Factory Meets Smart Grid: Cyber-Physical Compressed Air Systems Enable Demand Side Management in Industrial Environments

2015 ◽  
Vol 805 ◽  
pp. 25-31 ◽  
Author(s):  
Ralf Boehm ◽  
Johannes Bürner ◽  
Jörg Franke

In electric energy systems based on renewable generation plants supply and demand often do not occur in the same period of time. Consequently demand side management is gaining importance whereby decentralized automation offers opportunities in industrial environments. Compressed air systems on industrial plants consist of air compressors, compressed air reservoirs and compressed air lines. With suitable dimensioning those industrial compressed-air systems can be used for demand side management purpose. As power consumption of industrial air compressors ranges between a few and several hundred kilowatts each, swarms of communicatively connected air compressors can contribute to the stabilization of power grids. To avoid costly production downtime it is to ensure, that a reliable, non-disruptive supply of compressed air can be maintained at all time. Industrial compressed air systems equipped with automation technology and artificial intelligence, which hereinafter are referred to as Cyber-Physical Compressed Air Systems (CPCAS), allow new business models for utilities, industrial enterprises, compressor manufacturers and service providers. In addition to basic operating parameters like current air pressure and status, those systems can process further information and create, for example, profiles on compressed air consumption over time. By enriching those profiles with data on pressure, volumes, system restrictions and current production requirements (plans), the CPCAS can identify the available potential for demand side management. Ipso facto predictive power on electricity consumption is increasing. By providing the information obtained to the power company or a service provider, savings in electricity costs may be achieved. Expenses within the industrial company may be lowered further as compliance with agreed load limits is being improved by automatic shutdown of air compressors upon reaching the load limit. Within this article the structure of the aforementioned Cyber-Physical Compressed Air Systems is presented in more detail, relations between the major actors are being shown and possible business models are being introduced.

Energy ◽  
2021 ◽  
pp. 120978
Author(s):  
Géremi Gilson Dranka ◽  
Paula Ferreira ◽  
A. Ismael F. Vaz

2017 ◽  
Vol 871 ◽  
pp. 77-86
Author(s):  
Stefanie Kabelitz ◽  
Sergii Kolomiichuk

The supply of electricity is growing increasingly dependent on the weather as the share of renewable energies increases. Different measures can nevertheless maintain grid reliability and quality. These include the use of storage technologies, upgrades of the grid and options for responsiveness to supply and demand. This paper focuses on demand side management and the use of flexibility in production processes. First, the framework of Germany’s energy policy is presented and direct and indirect incentives for businesses to seek as well as to provide flexibility capabilities are highlighted. Converting this framework into a mixed integer program leads to multi-objective optimization. The challenge inherent to this method is realistically mapping the different objectives that affect business practices directly and indirectly in a variety of laws. An example is introduced to demonstrate the complexity of the model and examine the energy flexibility. Second, manufacturing companies’ energy efficiency is assessed under the frequently occurring conditions of heavily aggregated energy consumption data and of information with insufficient depth of detail to perform certain analyses, formulate actions or optimize processes. The findings obtained from the energy assessment and energy consumption projections are used to model the production system’s energy efficiency and thus facilitate optimization. Methods of data mining and machine learning are employed to project energy consumption. Aggregated energy consumption data and different production and environmental parameters are used to assess indirectly measured consumers and link projections of energy consumption with the production schedule.


Author(s):  
Souhil Mouassa ◽  
Marcos Tostado-Véliz ◽  
Francisco Jurado

Abstract With emergence of automated environments, energy demand increased with unexpected ratio, especially total electricity consumed in the residential sector. This unexpected increase in demand in energy brings a challenging task of maintaining the balance between supply and demand. In this work, a robust artificial ecosystem-inspired optimizer based on demand-side management is proposed to provide the optimal scheduling pattern of smart homes. More precisely, the main objectives of the developed framework are: i) Shifting load from on-peak hours to off-peak hours while fulfilling the consumer intends to reduce electricity-bills. ii) Protect users comfort by improving the appliances waiting time. Artificial ecosystem optimizer (AEO) algorithm is a novel optimization technique inspired by the energy flocking between all living organisms in the ecosystem on earth. Demand side management (DSM) program is modeled as an optimization problem with constraints of starting and ending of appliances. The proposed optimization technique based DSM program is evaluated on two different pricing schemes with considering two operational time intervals (OTI). Extensive simulation cases are carried out to validate the effectiveness of the proposed optimizer based energy management scheme. AEO minimizes total electricity-bills while keeping the user comfort by producing optimum appliances scheduling pattern. Simulation results revealed that the proposed AEO achieved a minimization electricity-bill up to 10.95, 10.2% for RTP and 37.05% for CPP for the 12 and 60 min operational time interval (OTI), respectively, in comparison to other results achieved by other optimizers. On the other hand peak to average ratio (PAR) is reduced to 32.9% using RTP and 31.25% using CPP tariff.


2011 ◽  
pp. 123-138 ◽  
Author(s):  
Valentina Ndou

This chapter’s main objective is to provide a new conceptualization of the tourism which has major implications for management approaches, business models and strategy techniques of the sector. The objective is to try to reconcile the complexity of the environment with the managerial techniques and strategies that aim to create sustainable competitive advantage. The author will begin with a review of tourism characteristics of supply and demand side. Then they will analyze the paradigm shifts that are taking place overall in the new economy and the main challenges they bring on in the tourism context. Subsequently, they will discuss the need to realize a shift in tourism conceptualization and management in itself. The author will move their focus of analysis away from traditional, mechanical views of tourism to dynamic approaches that take into account the behavior of the overall system and help identify key leverage points of change and transformation.


Energies ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 4351 ◽  
Author(s):  
Alain Aoun ◽  
Hussein Ibrahim ◽  
Mazen Ghandour ◽  
Adrian Ilinca

Fundamentally, two main methodologies are used to reduce the electric energy bill in residential, commercial, and even industrial applications. The first method is to act on the supply side by integrating alternative means of power generation, such as renewable energy generators, having a relatively low levelized cost of energy. Whereas, the second methodology focuses on the management of the load to minimize the overall paid cost for energy. Thus, this article highlights the importance of demand side management by comparing it to the supply side management having, as criteria, the total achieved savings on the overall annual energy bill of a residential microgrid supplied by two power sources and equipped with an electric vehicle. The optimization takes into consideration the cost of kWh that is paid by the prosumer based on an economical model having as inputs the outcomes of the energy model. The adopted energy model integrates, on the demand side, an intelligent energy management system acting on secondary loads, and on the supply side, a photovoltaic (PV) system with and without battery energy storage system (BESS). The outcome of this work shows that, under the right circumstances, demand side management can be as valuable as supply side control.


2016 ◽  
Vol 19 ◽  
pp. 124-131
Author(s):  
Beate Naser ◽  
Franziska Schäfer ◽  
Jörg Franke

By increasing the share of renewable energy sources, the volatility of available energy is rising. More and more fluctuating power generation by solar power plants and wind turbines has to be integrated into the power grid. Demand side management (DSM) represents one possible solution to achieve this goal by including energy production and energy consumption simultaneously. In this paper, we especially focus on the field of electric energy in smart homes. Considering the implementation of different DSM devices, an ontology-based approach can serve as a conceptual foundation for a necessary knowledge base. We propose an advanced energy ontology for smart homes, integrating important aspects for a successful DSM. We describe how power producers, storages and consumers are represented in our ontology. Finally, we show the scenario-based utilization of our approach.


2012 ◽  
Vol 209-211 ◽  
pp. 1867-1870 ◽  
Author(s):  
Hao Chi Guo ◽  
Jin Peng Liu ◽  
Huan Huan Qiao ◽  
Guan Qing Wang

China's power conflicts between supply and demand have become increasingly prominent. The smart grid has become an inevitable trend of network development at the same time, and DSM implementation effect in smart grid research increasingly attracts people’s attention. Through the analysis of different subjects in demand side management, the paper established demand side management effectiveness evaluation system in smart grid from the aspects of economic , environmental and social. Finally, empirical research verified the validity of the index system ,which provides a good reference for improving the level of demand side management.


2020 ◽  
pp. 139-159
Author(s):  
Alper Ozpinar ◽  
Eralp Ozil

Energy becoming more and more crucial and critical in the civilized populations and locates itself as one of the major requirements of living standards. Obtaining the energy from fossil fuels still is one of the common sources of energy production; however, there is a common understanding of increasing the potential use of renewables, carbon capture and storage, energy efficiency and intelligence and smart applications for collecting, distributing and transmission of the energy between the supply and demand locations. Those applications and generating the new policies, roadmaps in order to make an energy revolution and increase the usage of low-carbon energy technologies targeting the decrease of energy related emissions. In this chapter, the authors explains the common issues about smart grid and demand side management and possible use artificial intelligence and metaheuristic algorithms for smart grid and demand side management optimization and scheduling.


Sign in / Sign up

Export Citation Format

Share Document