Combustion Characteristic of Diesel Engine Fueled by Biodiesel at Partial Load

2018 ◽  
Vol 880 ◽  
pp. 145-150
Author(s):  
Bogdan Cornel Benea
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Fuel Injection ◽  
Combustion Characteristic ◽  
Brake Specific Fuel Consumption ◽  
Waste Oil ◽  
Brake Thermal Efficiency ◽  
Partial Load ◽  
Load Conditions

This paper investigated the performance and combustion characteristics of diesel engine fueled by biodiesel at partial load conditions. Experiments were made on a common-rail fuel injection diesel engine using mineral diesel and blends (6% and 10%) with biodiesel obtained from peanut oil and waste oil under various loads. The results shows that blend fuels have a significant impact on the engine’s brake specific fuel consumption (BSFC) and brake thermal efficiency (BTE) at partial load conditions. The BSFC increase for blends with the decrease of engine load. For BTE, the results show that the use of biodiesel results in a reduced thermal efficiency at lower engine loads and improved thermal efficiency at higher engine loads.

The Comparative Trail Research on the Performance of a Diesel Engine Fuelled with Diesel Fuel and Biodiesel/Diesel Blended Fuel

2011 ◽  
Vol 142 ◽  
pp. 103-106
Author(s):  
Wen Ming Cheng ◽  
Hui Xie ◽  
Gang Li
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Thermal Efficiency ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency ◽  
Series Of Experiments ◽  
Blended Fuel ◽  
Load Conditions

This paper discusses the brake specific fuel consumption and brake thermal efficiency of a diesel engine using cottonseed biodiesel blended with diesel fuel. A series of experiments were conducted for the various blends under varying load conditions at a speed of 1500 rpm and 2500 rpm and the results were compared with the neat diesel. From the results, it is found that the brake specific fuel consumption of cottonseed biodiesel is slightly higher than that of diesel fuel at different engine loads and speeds, with this increase being higher the higher the percentage of the biodiesel in the blend. And the brake thermal efficiency of cottonseed biodiesel is nearly similar to that of diesel fuel at different engine loads and speeds. From the investigation, it is concluded that cottonseed biodiesl can be directly used in diesel engines without any modifications, at least in small blending ratios.

scholarly journals Performance and emissions of a single cylinder diesel engine operating with rapeseed oil and jp-8 fuel blends

2015 ◽  
Vol 162 (3) ◽  
pp. 13-18
Author(s):  
Gvidonas Labeckas ◽  
Irena Kanapkienė
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Rapeseed Oil ◽  
Jet Fuel ◽  
Brake Specific Fuel Consumption ◽  
Test Results ◽  
Brake Thermal Efficiency ◽  
Engine Load ◽  
Fuel Blends

The article presents experimental test results of a DI single-cylinder, air-cooled diesel engine FL 511 operating with the normal (class 2) diesel fuel (DF), rapeseed oil (RO) and its 10%, 20% and 30% (v/v) blends with aviation-turbine fuel JP-8 (NATO code F-34). The purpose of the research was to analyse the effects of using various rapeseed oil and jet fuel RO90, RO80 and RO70 blends on brake specific fuel consumption, brake thermal efficiency, emissions and smoke of the exhaust. The test results of engine operation with various rapeseed oil and jet fuel blends compared with the respective parameters obtained when operating with neat rapeseed oil and those a straight diesel develops at full (100%) engine load and maximum brake torque speed of 2000 rpm. The research results showed that jet fuel added to rapeseed oil allows to decrease the value of kinematic viscosity making such blends suitable for the diesel engines. Using of rapeseed oil and jet fuel blends proved themselves as an effective measure to maintain fuel-efficient performance of a DI diesel engine. The brake specific fuel consumption decreased by about 6.1% (313.4 g/kW·h) and brake thermal efficiency increase by nearly 1.0% (0.296) compared with the respective values a fully (100%) loaded engine fuelled with pure RO at the same test conditions. The maximum NOx emission was up to 13.7% higher, but the CO emissions and smoke opacity of the exhaust 50.0% and 3.4% lower, respectively, for the engine powered with biofuel blend RO70 compared with those values produced by the combustion of neat rapeseed oil at full (100%) engine load and speed of 2000 rpm.

scholarly journals An Assessment on Performance Characteristics of Diesel Engine Using Lemongrass-Diesel Oil Fuel Blends

2021 ◽  
Author(s):  
Naveen Rana ◽  
Harikrishna Nagwan ◽  
Kannan Manickam
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Thermal Efficiency ◽  
Specific Fuel Consumption ◽  
Performance Characteristics ◽  
Emission Characteristics ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency ◽  
Fuel Blends

Abstract Indeed, the development of alternative fuels for use in internal combustion engines has become an essential requirement to meet the energy demand and to deal with the different problems related to fuel. The research in this domain leads to the identification of adverse fuel properties and for their solution standard limits are being defined. This paper outlines an investigation of performance and combustion characteristics of a 4-stroke diesel engine using different cymbopogon (lemongrass) - diesel fuel blends. 10% to 40% cymbopogon is mixed with diesel fuel and tested for performance characteristics like brake specific fuel consumption and brake thermal efficiency. To obtain emission characteristics smoke density in the terms of HSU has been measured. In result, it has observed that there is an increase of 5% in brake thermal efficiency and 16.33% decrease in brake specific fuel consumption. Regarding emission characteristics, a 12.9% decrease in smoke emission has been found.

Performance and Emission Characteristics of a Mixed Biodiesel Fueled CI Engine

2015 ◽  
Vol 766-767 ◽  
pp. 557-561
Author(s):  
S. Arunprasad ◽  
Thangavel Balusamy ◽  
S. Sivalakshmi
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Emission Characteristics ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency ◽  
Biodiesel Blends ◽  
Performance And Emission ◽  
Ci Engine ◽  
Smoke Opacity

In this present paper, an attempt has been made to examine the performance and emission characteristics of a single cylinder diesel engine fueled with blends of mixed biodiesel (Thevetia peruviana, Neem, Jatropha, Pongamia). Experiments were conducted with various blends of mixed biodiesel in CI engine for different loads. The results show that lower brake thermal efficiency and higher brake specific fuel consumption were obtained with mixed biodiesel blends when compared with diesel. Lower the value of CO and HC and higher the value of CO2 emissions were determined for mixed biodiesel blends compared to that of diesel. Also, higher in NOx and lower smoke opacity were found compared to diesel.

scholarly journals Experimental Analysis on Performance and Emission Characteristics of C.I. Engine Fueled by Neem Oil Biodiesel with Additive

2020 ◽  
Vol 9 (3) ◽  
pp. 2264-2268
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Ethyl Ether ◽  
Thermal Efficiency ◽  
Experimental Analysis ◽  
Emission Characteristics ◽  
Brake Specific Fuel Consumption ◽  
Neem Oil ◽  
Brake Thermal Efficiency ◽  
Performance And Emission

In this present work, experiments were conducted on a VCR Diesel engine with diesel, Neem oil biodiesel and Di-ethyl ether mixed with neem oil biodiesel. The performance and emission characteristics were evaluated and compared. The study shown that the Brake thermal efficiency increased and the brake specific fuel consumption reduced with B10 blend of neem oil biodiesel compared to diesel. The emissions of CO, CO2 were reduced but HC and smoke were increased with the use of biodiesel than diesel. The addition of Diethyl Ether (DEE) further improved the performance and decreased the emissions of CO and CO2 of the engine at B20DEE20 blend compared to other blends of biodiesel and diesel.

scholarly journals EXPERIMENTAL ANALYSIS OF THE COMBUSTION CHAMBER COATED WITH Mo AND Al2O3-TiO2 IN A DIESEL ENGINE

2021 ◽  
Vol 55 (4) ◽  
Author(s):  
Murugan Kuppusamy ◽  
Thirumalai Ramanathan ◽  
Udhayakumar Krishnavel ◽  
Seenivasan Murugesan
Keyword(s):  
Combustion Chamber ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Performance Test ◽  
Ceramic Powder ◽  
Specific Fuel Consumption ◽  
Emission Characteristic ◽  
Powder Materials ◽  
Brake Specific Fuel Consumption ◽  
Brake Thermal Efficiency

The effect of thermal-barrier coatings (TBCs) reduces fuel consumption, effectively improving the engine efficiency. This research focused on a TBC with a thickness of 300 µm insulating the combustion chamber of a direct ignition (DI) engine. The piston crown, inlet and exhaust-valve head were coated using air-plasma-spray coating. Ceramic powder materials such as molybdenum (Mo) and aluminum oxide titanium dioxide (Al2O3-TiO2) were used. A performance test of the engine with the coated combustion chamber was carried out to investigate the brake power, brake thermal efficiency, volumetric efficiency, brake specific fuel consumption and air-fuel ratio. Also, an emission-characteristic test was carried out to investigate the emissions of unburned hydrocarbon (HC), carbon monoxide (CO), nitrogen oxides (NO, NO2, NO3) and smoke opacity (SO). The results reveal that the brake thermal efficiency and brake specific fuel consumption show significant increases because of these coating materials. The effect of the Al2O3-TiO2 coating significantly reduces the HC and CO engine emissions.

Factors Affecting Performance of Dual Fuel Compression Ignition Engines

2013 ◽  
Vol 388 ◽  
pp. 217-222
Author(s):  
Mohamed Mustafa Ali ◽  
Sabir Mohamed Salih
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Fuel Injection ◽  
Direct Injection ◽  
Injection System ◽  
Dual Fuel ◽  
Injection Timing ◽  
Compression Ignition ◽  
Factors Affecting

Compression Ignition Diesel Engine use Diesel as conventional fuel. This has proven to be the most economical source of prime mover in medium and heavy duty loads for both stationary and mobile applications. Performance enhancements have been implemented to optimize fuel consumption and increase thermal efficiency as well as lowering exhaust emissions on these engines. Recently dual fueling of Diesel engines has been found one of the means to achieve these goals. Different types of fuels are tried to displace some of the diesel fuel consumption. This study is made to identify the most favorable conditions for dual fuel mode of operation using Diesel as main fuel and Gasoline as a combustion improver. A single cylinder naturally aspirated air cooled 0.4 liter direct injection diesel engine is used. Diesel is injected by the normal fuel injection system, while Gasoline is carbureted with air using a simple single jet carburetor mounted at the air intake. The engine has been operated at constant speed of 3000 rpm and the load was varied. Different Gasoline to air mixture strengths investigated, and diesel injection timing is also varied. The optimum setting of the engine has been defined which increased the thermal efficiency, reduced the NOx % and HC%.

Studies on Influence of Injection Timing and Diesel Replacement on LPG-Diesel Dual-Fuel Engine

2003 ◽  
Author(s):  
C. V. Sudhir ◽  
Vijay Desai ◽  
Y. Suresh Kumar ◽  
P. Mohanan
Keyword(s):  
Energy Consumption ◽  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Dual Fuel ◽  
Injection Timing ◽  
Brake Thermal Efficiency ◽  
Full Load ◽  
Smoke Density ◽  
Diesel Operation

Reducing the emissions and fuel consumption for IC engines are no longer the future goals; instead they are the demands of today. People are concerned about rising fuel costs and effects of emissions on the environment. The major contributor for the increased levels of pollutants is the Diesel engines. Diesel engine finds application in almost in all fields, including transportation sector such as buses, trucks, railway engines, etc. and in industries as power generating units. In the present work an attempt is made for effective utilization of diesel engine aiming for reduction in fuel consumption and smoke density. This is achieved by some minor modifications in diesel engine, so as to run the existing diesel engine as a LPG-Diesel dual-fuel engine with LPG (Liquefied Petroleum Gas) induction at air intake. The important aspect of LPG-Diesel dual-fuel engine is that it shows significant reduction in smoke density and improved brake thermal efficiency with reduced energy consumption. An existing 4-S, single cylinder, naturally aspirated, water-cooled, direct injection, CI engine test rig was used for the experimental purpose. With proper instrumentation the tests were conducted under various LPG flow rates, loads, and injection timings. The influence of the diesel replacement by LPG on smoke density, brake specific energy consumption and brake thermal efficiency were studied. The optimal diesel replacement pertaining to the maximum allowable LPG gas flow limits could be assessed with these experiments. The influence of the injection timing variation on the engine performance and smoke density were analyzed form the experimental results. It was also observed that beyond half load operation of the dual-fuel engine, the brake thermal efficiency increases with diesel replacement, and at full load up to 4% improvement was observed compared to full diesel operation. At full load reduction in smoke density up to 25–36% was observed compared to full diesel operation. At advance injection timing of 30°btdc the performance was better with lower emissions compared to normal and retarded injection timings.

Effects of Ethanol-n butanol-diesel Oxygenated Fuel on Performance of Diesel Engine

2013 ◽  
Vol 860-863 ◽  
pp. 1766-1769
Author(s):  
Ming Wei Xiao ◽  
Jin'ge He
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Direct Injection ◽  
Brake Specific Fuel Consumption ◽  
Fuel Supply ◽  
Direct Injection Diesel Engine ◽  
Oxygenated Fuel ◽  
Performance And Emissions ◽  
Blend Fuel

The experiments of the economy performance and emissions of diesel engine fueled with ethanol-n butanol-diesel were performed on a dual-cylinder direct injection diesel engine. The results show that without modification on the engine, while the mixed proportion of ethanol getting larger, the equivalent brake specific fuel consumption decreases and effective thermal efficiency increases when the diesel engine work on medium and high loads condition, NOX emissions and smoke decreased obviously. But the smoke increased when the proportion of ethanol is 20%. And the results also indicate that it is beneficial for decreasing the smoke and NOX emissions to reduce suitably fuel supply advance angle when the diesel engine fueled with blend fuel mixed high proportion of ethanol.

scholarly journals Investigation on the performance and emissions profile of CI engine using cashew nut shell pyro oil–toluene–diesel blends

2021 ◽  
Vol 3 (5) ◽  
Author(s):  
K. Venkatesan
Keyword(s):  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Pressure Rise ◽  
Exhaust Emission ◽  
Brake Specific Fuel Consumption ◽  
Cylinder Pressure ◽  
Brake Thermal Efficiency ◽  
Cashew Nut ◽  
Ci Engine ◽  
Cashew Nut Shell

Abstract This article examines the prospects of using toluene added cashew nut shell pyro oil–diesel blends as alternative fuels in CI engine. Effects of adding fixed proportion (by vol.) of toluene (TU) to various cashew nut shell pyro oil (CPO)–diesel (D) blends on the performance and exhaust emission characteristics of a direct injection, single cylinder, water cooled, naturally-aspirated, constant speed run, 4-stroke CI engine were investigated under varied brake power conditions. Tested fuels were neat diesel, CPOT5 (5% CPO + 5% TU + 90% D), CPOT10 (10% CPO + 5% TU + 85% D) and CPOT15 (15% CPO + 5% TU + 80% D). CPO was extracted through a lab-scale fast pyrolysis apparatus. Fuel samples were prepared and characterized according to ASTM standards. Owing to the features like low sensitivity, impressive anti pinging, etc., presence of toluene in an optimal CPO-diesel blend was expected to promote the engine characteristics. Set of experiments were conducted for each fuel mixture and the respective in-cylinder pressure, fuel consumption, exhaust emission levels, temperatures were recorded. At the rated power output condition, CPOT5 fuel had shown 1.67% increased brake thermal efficiency, 5% reduced brake specific fuel consumption, almost 3% reduced exhaust gas temperatures as well as reduced the exhaust emissions such as HC (from 91 to 87 ppm), CO (from 0.1 to 0.08%), NOx (from 458 to 426 ppm), smoke levels (from 72 to 69 BSN). CPOT5 showed improved combustion characteristics like reduced ignition delays and combustion durations, increased rates of cylinder pressure rise and heat release. However, overall attained improvements in the engine parameters were found to be not up to the mark which makes the chances of using CPOT5 as best alternative to diesel feeble. Article highlights The Cashew nut shells agro-waste is efficiently converted into an alternative fuel. Effect of adding toluene to pyro oil – diesel blends in CI engine is examined. Engine performance is improved marginally with 1.6% higher brake thermal efficiency (BTE) and 5% lower brake specific fuel consumption (BSFC). Reductions in CO, HC, NOx and smoke emissions are observed. Reduced Ignition delay and combustion durations, increased rate of pressure rise, and increased HRR are observed.

Sign in / Sign up

Export Citation Format

Share Document