Research on the Optimization Design of Gas-Solid Coupling of Wind Turbine Blades

2014 ◽  
Vol 1022 ◽  
pp. 143-146
Author(s):  
Zhi Qiang Xu
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Optimization Design ◽  
Turbine Blades ◽  
Wind Load ◽  
Rotor Blades ◽  
Model Parameters ◽  
Surface Pressure Distribution ◽  
The Law ◽  
The Impact

The effects of high-altitude wind shear of wind speed should be considered, the appropriate number of distribution group should be determined and the distribution of wind speed hybrid model parameters and solving should be loaded onto the blades. When the stress of rotor blade is analyzed, the elastic deformation of the blades and the effects of the vibration of oscillating flow field on reaction of the blades must be considered during the operation. Thus the laws of blade load distribution and the corresponding deformation can be accurately calculated to analyze the interplay between deformation vibration airflow and paddle, to determine the law of deformation of rotor blades, the surface pressure distribution, stress distribution and blade design safety factors. When wind load changes with the wind speed, the adaptive blades are powered by aeroelastic, the law of wielding and flapping of the blade will be studied. The torsion coupling effects of adaptive blade, blade bending ,the law of torsional deformation variation of the angle of attack and the impact on aeroelastic blades structural strength will be explored. The results of this study design will be optimized as the power factor, improving the stability of the design of wind turbine power output, reducing material consumption blades absorb vibration and reducing wind load maneuvering to avoid blade stall achieve pitch control. Thus it provides a theoretical basis for optimal design of strength and stiffness of the elongated paddles.

Experimental investigations and aerodynamic shape optimization of small horizontal axis wind turbine blades

2021 ◽  
Author(s):  
Manoj Kumar Chaudhary ◽  
S Prakash
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Research Work ◽  
Horizontal Axis ◽  
Power Coefficient ◽  
Wind Turbine Blades ◽  
Horizontal Axis Wind Turbine ◽  
The Impact ◽  
Blade Geometry

This paper aims to optimize and investigate the small horizontal axis wind turbine blades at low wind speed. The objective of this research work is to explain the design method based on BEM theory for 0.2 m blade rotors with constant, variable and linear chord with twisted blade geometry. MATLAB and Xfoil programs were used for BEM principles and wind turbines with SG6043 airfoil. A numerical and experimental study was carried out to examine the impact of rotor solidity from 0.057 to 0.207 and the number of blades from 3 to 7 in this research work. The experimental blades were developed by using the 3D printing additive manufacturing technique. The investigation of the rotors has been done in an open wind tunnel, at wind speed from 2 to 8 m/s. The initial investigation range included tip speed ratios from 2 to 8, and angle of attacks from 2 to 20°. Later on these parameters were varied in Matlab and Xfoil software optimization and investigation of the power coefficient, blade geometry, number of blades and blade pitch angle. It was found that the rotor solidity 0.055 to 0.085 displayed better performances.

scholarly journals Impact of the ground clearance on the annual energy production and tower cost of an offshore wind turbine

2021 ◽  
pp. 11-16
Author(s):  
Do Tung Duong Do
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Energy Production ◽  
Rotor Blades ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Cost Calculation ◽  
Concentrated Mass ◽  
Ground Clearance ◽  
The Impact

This article analyzes the impact of the ground clearance on the Annual Energy Production (AEP) and tower cost of a 20 MW offshore wind turbine. In addition, the influence of the rated wind speed on the analysis result will be considered. The AEP is computed by considering wind speed variation over the swept area of the rotor blades. The tapered tubular steel tower is considered for mass and cost calculation. The tower is considered as a fixed-free cantilever beam with concentrated mass at the free end. The analysis shows that the ground clearance only has a minor impact on the AEP but it has a remarkable impact on the tower mass. Specifically, when the ground clearance reaches 50 meters, the AEP only increases by roughly 3% while tower mass is nearly doubled compared to the case with no ground clearance. The results also reveal the significant impact of the rated speed on both the AEP and tower mass.

Evaluation of the influence of wind speed and angle of attack on the aerodynamic effect of wind turbine blades

2017 ◽  
Author(s):  
Salete Alves ◽  
Luiz Guilherme Vieira Meira de Souza ◽  
Edália Azevedo de Faria ◽  
Maria Thereza dos Santos Silva ◽  
Ranaildo Silva
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Angle Of Attack ◽  
Wind Turbine Blades ◽  
Aerodynamic Effect

scholarly journals Dynamic characteristics analysis of planetary gear system with internal and external excitation under turbulent wind load

2021 ◽  
Vol 104 (3) ◽  
pp. 003685042110356
Author(s):  
Hexu Yang ◽  
Xiaopeng Li ◽  
Jinchi Xu ◽  
Zemin Yang ◽  
Renzhen Chen
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Nonlinear Dynamic ◽  
Planetary Gear ◽  
Wind Load ◽  
Transmission System ◽  
Gear Transmission ◽  
Stiffness Ratio ◽  
Gear Transmission System ◽  
Planetary Gear System

According to the working characteristics of a 1.5 MW wind turbine planetary gear system under complex and random wind load, a two-parameter Weibull distribution model is used to describe the distribution of random wind speed, and the time-varying load caused by random wind speed is obtained. The nonlinear dynamic model of planetary gear transmission system is established by using the lumped parameter method, and the relative relations among various components are derived by using Lagrange method. Then, the relative relationship between the components is solved by Runge Kutta method. Considering the influence of random load and stiffness ratio on the planetary gear transmission system, the nonlinear dynamic response of cyclic load and random wind load on the transmission system is analyzed. The analysis results show that the variation of the stiffness ratio makes the planetary gear have abundant nonlinear dynamics behavior and the planetary gear can get rid of chaos and enter into stable periodic motion by changing the stiffness ratio properly on the premise of ensuring transmission efficiency. For the variable pitch wind turbine, the random change of external load increases the instability of the system.

scholarly journals Analysis of Wind Turbine Aging through Operation Data Calibrated by LiDAR Measurement

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2319
Author(s):  
Hyun-Goo Kim ◽  
Jin-Young Kim
Keyword(s):  
Power Generation ◽  
Wind Speed ◽  
Wind Turbine ◽  
Wind Farm ◽  
Free Stream ◽  
Turbine Blades ◽  
Wind Farms ◽  
Lidar Measurement ◽  
Wind Turbine Blades ◽  
Wake Effect

This study analyzed the performance decline of wind turbine with age using the SCADA (Supervisory Control And Data Acquisition) data and the short-term in situ LiDAR (Light Detection and Ranging) measurements taken at the Shinan wind farm located on the coast of Bigeumdo Island in the southwestern sea of South Korea. Existing methods have generally attempted to estimate performance aging through long-term trend analysis of a normalized capacity factor in which wind speed variability is calibrated. However, this study proposes a new method using SCADA data for wind farms whose total operation period is short (less than a decade). That is, the trend of power output deficit between predicted and actual power generation was analyzed in order to estimate performance aging, wherein a theoretically predicted level of power generation was calculated by substituting a free stream wind speed projecting to a wind turbine into its power curve. To calibrate a distorted wind speed measurement in a nacelle anemometer caused by the wake effect resulting from the rotation of wind-turbine blades and the shape of the nacelle, the free stream wind speed was measured using LiDAR remote sensing as the reference data; and the nacelle transfer function, which converts nacelle wind speed into free stream wind speed, was derived. A four-year analysis of the Shinan wind farm showed that the rate of performance aging of the wind turbines was estimated to be −0.52%p/year.

scholarly journals A Robot-Assisted Large-Scale Inspection of Wind Turbine Blades in Manufacturing Using an Autonomous Mobile Manipulator

2021 ◽  
Vol 11 (19) ◽  
pp. 9271
Author(s):  
Heiko Engemann ◽  
Patrick Cönen ◽  
Harshal Dawar ◽  
Shengzhi Du ◽  
Stephan Kallweit
Keyword(s):  
Wind Turbine ◽  
Rotor Blade ◽  
Large Scale ◽  
Turbine Blades ◽  
Rotor Blades ◽  
Mobile Manipulator ◽  
Wind Turbine Blades ◽  
Left Hand ◽  
Planning Strategy ◽  
Execution Strategy

Wind energy represents the dominant share of renewable energies. The rotor blades of a wind turbine are typically made from composite material, which withstands high forces during rotation. The huge dimensions of the rotor blades complicate the inspection processes in manufacturing. The automation of inspection processes has a great potential to increase the overall productivity and to create a consistent reliable database for each individual rotor blade. The focus of this paper is set on the process of rotor blade inspection automation by utilizing an autonomous mobile manipulator. The main innovations include a novel path planning strategy for zone-based navigation, which enables an intuitive right-hand or left-hand driving behavior in a shared human–robot workspace. In addition, we introduce a new method for surface orthogonal motion planning in connection with large-scale structures. An overall execution strategy controls the navigation and manipulation processes of the long-running inspection task. The implemented concepts are evaluated in simulation and applied in a real-use case including the tip of a rotor blade form.

scholarly journals Remaining Useful Life Estimation of Wind Turbine Blades under Variable Wind Speed Conditions Using Particle Filters

2018 ◽  
Vol 10 (1) ◽  
Author(s):  
Bhavana Valeti ◽  
Shamim N. Pakzad
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Remaining Useful Life ◽  
Structural Components ◽  
Wind Turbine Blades ◽  
Average Wind Speed ◽  
Average Wind ◽  
Useful Life ◽  
Variable Wind

Rotor blades are the most complex structural components in a wind turbine and are subjected to continuous cyclic loads of wind and self-weight variation. The structural maintenance operations in wind farms are moving towards condition based maintenance (CBM) to avoid premature failures. For this, damage prognosis with remaining useful life (RUL) estimation in wind turbine blades is necessary. Wind speed variation plays an important role influencing the loading and consequently the RUL of the structural components. This study investigates the effect of variable wind speed between the cutin and cut-out speeds of a typical wind farm on the RUL of a damage detected wind turbine blade as opposed to average wind speed assumption. RUL of wind turbine blades are estimated for different initial crack sizes using particle filtering method which forecasts the evolution of fatigue crack addressing the non-linearity and uncertainty in crack propagation. The stresses on a numerically simulated life size onshore wind turbine blade subjected to the above wind speed loading cases are used in computing the crack propagation observation data for particle filters. The effects of variable wind speed on the damage propagation rates and RUL in comparison to those at an average wind speed condition are studied and discussed.

scholarly journals Brief communication: Nowcasting of precipitation for leading-edge-erosion-safe mode

2020 ◽  
Vol 5 (3) ◽  
pp. 977-981 ◽  
Author(s):  
Anna-Maria Tilg ◽  
Charlotte Bay Hasager ◽  
Hans-Jürgen Kirtzel ◽  
Poul Hummelshøj
Keyword(s):  
Liquid Phase ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Leading Edge ◽  
Wind Turbine Blades ◽  
Spatio Temporal ◽  
The Impact ◽  
Theoretical Considerations ◽  
Mode A ◽  
Precipitation Events

Abstract. Leading-edge erosion (LEE) of wind turbine blades is caused by the impact of hydrometeors, which appear in a solid or liquid phase. A reduction in the wind turbine blades' tip speed during defined precipitation events can mitigate LEE. To apply such an erosion-safe mode, a precipitation nowcast is required. Theoretical considerations indicate that the time a raindrop needs to fall to the ground is sufficient to reduce the tip speed. Furthermore, it is described that a compact, vertically pointing radar that measures rain at different heights with a sufficiently high spatio-temporal resolution can nowcast rain for an erosion-safe mode.

Importance of Shear in Site Assessment of Wind Turbine Fatigue Loads

2018 ◽  
Vol 140 (4) ◽  
Author(s):  
René M. M. Slot ◽  
Lasse Svenningsen ◽  
John D. Sørensen ◽  
Morten L. Thøgersen
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Structural Reliability ◽  
Turbine Blades ◽  
Structural Response ◽  
Fatigue Loading ◽  
Worst Case ◽  
Shear Model ◽  
Wind Climate

Wind turbines are subjected to fatigue loading during their entire lifetime due to the fluctuating excitation from the wind. To predict the fatigue damage, the design standard IEC 61400-1 describes how to parametrize an on-site specific wind climate using the wind speed, turbulence, wind shear, air density, and flow inclination. In this framework, shear is currently modeled by its mean value, accounting for neither its natural variance nor its wind speed dependence. This very simple model may lead to inaccurate fatigue assessment of wind turbine components, whose structural response is nonlinear with shear. Here we show how this is the case for flapwise bending of blades, where the current shear model leads to inaccurate and in worst case nonconservative fatigue assessments. Based on an optimization study, we suggest modeling shear as a wind speed dependent 60% quantile. Using measurements from almost one hundred sites, we document that the suggested model leads to accurate and consistent fatigue assessments of wind turbine blades, without compromising other main components such as the tower and the shaft. The proposed shear model is intended as a replacement to the mean shear, and should be used alongside the current IEC models for the remaining climate parameters. Given the large number of investigated sites, a basis for evaluating the uncertainty related to using a simplified statistical wind climate is provided. This can be used in further research when assessing the structural reliability of wind turbines by a probabilistic or semiprobabilistic approach.

scholarly journals An investigation of the impact of wind speed and turbulence on small wind turbine operation and fatigue loads

2020 ◽  
Vol 146 ◽  
pp. 87-98 ◽  
Author(s):  
Anup KC ◽  
Jonathan Whale ◽  
Samuel P. Evans ◽  
Philip D. Clausen
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Small Wind Turbine ◽  
Fatigue Loads ◽  
The Impact
Sign in / Sign up

Export Citation Format

Share Document