Experimental Study of Information Processing Application in Second Language to Computer Interface of Brain

2014 ◽  
Vol 1022 ◽  
pp. 296-299
Author(s):  
Xiu Jun Li ◽  
Jing Jing Yang ◽  
Qi Yong Guo ◽  
Jing Long Wu

The computer how to identify the language? How the brain controls the brain computer interface (BCI) equipment? Reading in a second language (L2) is a complex task that entails an interaction between L2 and the native language (L1). Previous studies have suggested that bilingual subjects recruit the neural system of their logographic L1 (Chinese) reading and apply it to alphabetic L2 (English) reading. In this study, we used functional magnetic resonance imaging (fMRI) to visualize Japanese-Chinese bilinguals’ brain activity in phonological processing of Japanese Kanji (L1) and Chinese characters (L2) and application to BCI, two written languages with highly similar orthography. In the experiment, the subjects were asked to judge whether two Japanese Kanji (or Chinese characters) presented at the left and right side of the fixation point rhymed with each other. A font size decision task was used as a control task, where the subjects judged whether the two Japanese Kanji (or Chinese characters) had an identical physical size. Subjects indicated a positive response by pressing the key corresponding to the index finger and a negative response by pressing the key corresponding to the middle finger of their right hand. The result showed that our bilingual Japanese subjects have large overlaps in the neural substrates for phonological processing of both native and second language. Our results are application to brain computer interface.

2006 ◽  
Vol 18 (8) ◽  
pp. 1277-1291 ◽  
Author(s):  
Núria Sebastian-Gallés ◽  
Antoni Rodríguez-Fornells ◽  
Ruth de Diego-Balaguer ◽  
Begoña Díaz

Performance-based studies on the psychological nature of linguistic competence can conceal significant differences in the brain processes that underlie native versus nonnative knowledge of language. Here we report results from the brain activity of very proficient early bilinguals making a lexical decision task that illustrates this point. Two groups of Spanish-Catalan early bilinguals (Spanish-dominant and Catalan-dominant) were asked to decide whether a given form was a Catalan word or not. The nonwords were based on real words, with one vowel changed. In the experimental stimuli, the vowel change involved a Catalan-specific contrast that previous research had shown to be difficult for Spanish natives to perceive. In the control stimuli, the vowel switch involved contrasts common to Spanish and Catalan. The results indicated that the groups of bilinguals did not differ in their behavioral and event-related brain potential measurements for the control stimuli; both groups made very few errors and showed a larger N400 component for control nonwords than for control words. However, significant differences were observed for the experimental stimuli across groups: Specifically, Spanish-dominant bilinguals showed great difficulty in rejecting experimental nonwords. Indeed, these participants not only showed very high error rates for these stimuli, but also did not show an error-related negativity effect in their erroneous nonword decisions. However, both groups of bilinguals showed a larger correct-related negativity when making correct decisions about the experimental nonwords. The results suggest that although some aspects of a second language system may show a remarkable lack of plasticity (like the acquisition of some foreign contrasts), first-language representations seem to be more dynamic in their capacity of adapting and incorporating new information.


Proceedings ◽  
2018 ◽  
Vol 2 (18) ◽  
pp. 1179 ◽  
Author(s):  
Francisco Laport ◽  
Francisco J. Vazquez-Araujo ◽  
Paula M. Castro ◽  
Adriana Dapena

A brain-computer interface for controlling elements commonly used at home is presented in this paper. It includes the electroencephalography device needed to acquire signals associated to the brain activity, the algorithms for artefact reduction and event classification, and the communication protocol.


2017 ◽  
Vol 5 ◽  
pp. 187-191
Author(s):  
Martin Hudák ◽  
Radovan MadleĹˆĂˇk ◽  
Veronika Brezániová

Marketing can be described as a tool for companies to influence the consumer’s perception to the desired direction. The current market situation is characterized by dynamism, growing consumer power, and intense competition. The consumer perception and behavior are changing and therefore need to be constantly monitored and measured. The aim of this article is to scan and measure consumer’s perception while watching a video advertisement. During this experiment, an eye-tracking technology was used, which allows capturing a consumer’s gaze. The central part of the research is to measure the brain activity of a consumer based on the EEG (Electroencephalography). EMOTIV Epoc+ is a 14-channel wireless EEG, designed for contextualized research and advanced brain computer interface applications. An advertising campaign from four different mobile operators was used for this purpose. In the conclusion of this article, consumer’s perception of different advertising campaigns are compared and evaluated.


2020 ◽  
Vol 8 (6) ◽  
pp. 2370-2377

A brain-controlled robot using brain computer interfaces (BCIs) was explored in this project. BCIs are systems that are able to circumvent traditional communication channels (i.e. muscles and thoughts), to ensure the human brain and physical devices communicate directly and are in charge by converting various patterns of brain activity to instructions in real time. An automation can be managed with these commands. The project work seeks to build and monitor a program that can help the disabled people accomplish certain activities independently of others in their daily lives. Develop open-source EEG and brain-computer interface analysis software. The quality and performance of BCI of different EEG signals are compared. Variable signals obtained through MATLAB Processing from the Brainwave sensor. Automation modules operate by means of the BCI system. The Brain Computer Interface aims to build a fast and reliable link between a person's brain and a personal computer. The controls also use the Brain-Computer Interface for home appliances. The system will integrate with any smartphones voice assistant.


Author(s):  
Sravanth K. Ramakuri ◽  
Premkumar Chithaluru ◽  
Sunil Kumar

The human brain is the central organ of the human system. Many people in the world cannot move on their own and can't control things on their own. A person whose brain is active can control things using the neuro-controlled robot car. It is interesting to all types of people to measure their concentration and piece level of mind with the neuro sky mind wave device. One can easily control the robot's movements by simply blinking eyes; the robot's speed will be according to the subject's attention levels. The neuro sky mind wave device digitizes brain wave signals to power the user-interface of the computers, game, and health application. The neuro sky mind wave device will measure brain waves from the forehead. The paper aims to control a robot using the brain-computer interface concept without any muscular activity controlling healthcare applications directions. The brain activity is recorded with the neuro sky mind wave device's help, and the attention values are sent to the Arduino with the help of the HC-05 Bluetooth module. Arduino is programmed so that if the attention values between 0-29 and the person are relaxed, the green light will glow for the feedback.


2018 ◽  
Vol 210 ◽  
pp. 04046 ◽  
Author(s):  
Martin Strmiska ◽  
Zuzana Koudelkova

Brain-computer interface (BCI) is a device that enables the connection between the human brain and a computer, therefore, it allows us to observe the brain activity. The goal of this article is to prove that brain-computer interface is a helpful and quite precise tool. This goal will be achieved by presenting various examples from real-life situations. The results show that this device is indeed helpful, e.g. in a medical field, however, it is not commonly used in hospitals.


2019 ◽  
Vol 5 (6) ◽  
pp. 3
Author(s):  
Kulsheet Kaur Virdi ◽  
Satish Pawar

A brain-computer interface (BCI), also referred to as a mind-machine interface (MMI) or a brain-machine interface (BMI), provides a non-muscular channel of communication between the human brain and a computer system. With the advancements in low-cost electronics and computer interface equipment, as well as the need to serve people suffering from disabilities of neuromuscular disorders, a new field of research has emerged by understanding different functions of the brain. The electroencephalogram (EEG) is an electrical activity generated by brain structures and recorded from the scalp surface through electrodes. Researchers primarily rely on EEG to characterize the brain activity, because it can be recorded noninvasively by using portable equipment. The EEG or the brain activity can be used in real time to control external devices via a complete BCI system. For these applications there is need of such machine learning application which can be efficiently applied on these EEG signals. The aim of this research is review different research work in the field of brain computer interface related to body parts movements.


2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Tarek Frikha ◽  
Najmeddine Abdennour ◽  
Faten Chaabane ◽  
Oussama Ghorbel ◽  
Rami Ayedi ◽  
...  

A Brain-Computer Interface (BCI) is a system used to communicate with an external world through the brain activity. The brain activity is measured by electroencephalography (EEG) signal and then processed by a BCI system. EEG source reconstruction could be a way to improve the accuracy of EEG classification in EEG based brain-computer interface (BCI). The source localization of the human brain activities can be an important resource for the recognition of the cognitive state, medical disorders, and a better understanding of the brain in general. In this study, we have compared 51 mother wavelets taken from 7 different wavelet families, which are applied to a Stationary Wavelet Transform (SWT) decomposition of an EEG signal. This process includes Haar, Symlets, Daubechies, Coiflets, Discrete Meyer, Biorthogonal, and reverse Biorthogonal wavelet families in extracting five different brainwave subbands for source localization. For this process, we used the Independent Component Analysis (ICA) for feature extraction followed by the Boundary Element Model (BEM) and the Equivalent Current Dipole (ECD) for the forward and inverse problem solutions. The evaluation results in investigating the optimal mother wavelet for source localization eventually identified the sym20 mother wavelet as the best choice followed by bior6.8 and coif5.


Author(s):  
Aleš Belic ◽  
Vito Logar

A combination of several techniques is necessary for a reliable identification of activities based on EEG signals. A separation of the overlapping patterns in the EEG signals is often performed first. These separated patterns are then analysed by some artificial intelligence methods in order to identify the activity. As pattern separation and activity identification are often linked, the two processes must be tuned to a specific problem, thus losing some generality of the procedure. The complexity of the patterns in EEG signals is often too great for completely automated pattern recognition. In this case, phase demodulation was introduced as a procedure for the extraction of the phase properties of the EEG signals. These phase shifts are known to correlate with the brain activity; therefore, phase-demodulated EEG signals were used to predict the motor activity. Three studies with off-line identification of the motor activities have been performed so far. In the first study, a continuous gripping force was predicted. In the second study, index- and middle-finger activation was predicted, and in the final study, wrist movements were analysed. The presented procedure can be used for designing a continuous brain-computer interface.


Author(s):  
Francisco Laport ◽  
Francisco J. Vazquez-Araujo ◽  
Paula M. Castro ◽  
Adriana Dapena

A brain-computer interface for controlling elements commonly used at home is presented in this paper. It includes the electroencephalography device needed to acquire signals associated to the brain activity, the algorithms for artefact reduction and event classification, and the communication protocol.


Sign in / Sign up

Export Citation Format

Share Document