Design and Optimization of Dense Phase Desulfurization Tower

2014 ◽  
Vol 1044-1045 ◽  
pp. 553-558
Author(s):  
Hai Jun Tian ◽  
Cun Yi Song ◽  
Zhen Song Tong
Keyword(s):  
Flow Field ◽  
Field Distribution ◽  
Flue Gas ◽  
Three Dimensional ◽  
Simple Algorithm ◽  
Internal Flow ◽  
Calculation Model ◽  
Dense Phase ◽  
Design And Optimization ◽  
Dense Flow

Dense flow absorber of desulfurization is a new type of semi dry flue gas desulfurization technology, desulfurization of flue gas is mainly in the dense phase absorption tower. By using the turbulence model in Fluent.14 software, three-dimensional numerical simulation of dense phase in different flue gas entrance tower height of internal flow field. Selection of k- ε model as the calculation model, using Simple algorithm. Selected from the flue gas 1m, 2mand 3m, simulation the flow field distribution, combined with the experimental analysis.The results show that the flue gas entrance height from the top of the 1m, the flow field distribution is uniform, the minimum pressure drop.

scholarly journals Numerical Study of the Internal Flow Field of a Centrifugal Impeller

1994 ◽  
Author(s):  
Mou-jin Zhang ◽  
Chuan-gang Gu ◽  
Yong-miao Miao
Keyword(s):  
Flow Field ◽  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Simple Algorithm ◽  
Internal Flow ◽  
Staggered Grid ◽  
Navier Stokes ◽  
Centrifugal Impeller ◽  
High Reynolds

The complex three-dimensional flow field in a centrifugal impeller with low speed is studied in this paper. Coupled with high–Reynolds–number k–ε turbulence model, the fully three–dimensional Reynolds averaged Navier–Stokes equations are solved. The Semi–Implicit Method for Pressure–Linked Equations (SIMPLE) algorithm is used. And the non–staggered grid arrangement is also used. The computed results are compared with the available experimental data. The comparison shows good agreement.

The Numerical Simulation of the Flow Field in the Underground Hydrocyclone

2013 ◽  
Vol 655-657 ◽  
pp. 470-475
Author(s):  
Jing Chang Wang ◽  
Fu Lai Guo ◽  
Meng Hua Wu
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Field Distribution ◽  
Phase Distribution ◽  
Three Dimensional ◽  
Internal Flow ◽  
No Formation ◽  
The Media ◽  
Solid Liquid ◽  
Air Column

For preventing sand in underground oil, this paper structures a model of hydrocyclone with the inside cyclone and the outside one seriesing and describes how it works. By the TGrid procedures, the all of the hydrocyclone is meshed with the tetrahedral and the boundary conditions are determined. The methods of Three-dimensional numerical simulation in FLUENT are used to simulate the velocity field distribution, the pressure field distribution, the path lines of the separated medition characteristics of the separated medium and the phase distribution of the medium. The affect of the internal separated medition characteristics to the separated performance is analysed. Through the simulation, it is found that the spiral fin in the hydrocyclone can guide the fluid to produce a vortex flow to meet the purpose of separating the solid-liquid. There is no formation of the air column comparing with the conventional cyclone, so the internal flow field is more stable to conductive to the separation of the media. It provides a basis for the improvement of the cyclone.

Study on Numerical Simulation of Internal Flow Fields in the New-Type

2014 ◽  
Vol 507 ◽  
pp. 869-873
Author(s):  
Lei Zhang ◽  
Ming Li ◽  
Yong Yao
Keyword(s):  
Flow Field ◽  
Flue Gas ◽  
Optimization Design ◽  
Gas Flow ◽  
Dynamic Pressure ◽  
Three Dimensional ◽  
Tangential Velocity ◽  
Internal Flow ◽  
Turbulence Flow ◽  
New Type

This paper uses Reynolds stress equation turbulence model (RSM) to simulate the flue gas flow field in the new-type stack, and analyzes the velocity field and pressure field of its three-dimensional strong spiral turbulence flow field. It gets the distribution characteristics of tangential velocity, axial velocity, static pressure, dynamic pressure and total pressure in the internal flow field of the new-type stack, thus provides reference to the research and optimization design of the flow mechanism..

THE INTERNAL FLOW FIELD ASSOCIATED WITH YAWED THREE-DIMENSIONAL RECTANGULAR CAVITIES

2000 ◽  
Vol 7 (3) ◽  
pp. 14
Author(s):  
Eric Savory ◽  
Norman Toy ◽  
Shiki Okamoto ◽  
Yoko Yamanishi
Keyword(s):  
Flow Field ◽  
Three Dimensional ◽  
Internal Flow

Two-Phase Flow Field Numerical Simulation in Scrubber for Exhaust Gas Desulfurization

2014 ◽  
Vol 541-542 ◽  
pp. 1288-1291
Author(s):  
Zhi Feng Dong ◽  
Quan Jin Kuang ◽  
Yong Zheng Gu ◽  
Rong Yao ◽  
Hong Wei Wang
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Flue Gas ◽  
Two Phase Flow ◽  
Three Dimensional ◽  
Flue Gas Desulfurization ◽  
Parameter Design ◽  
Phase Flow ◽  
Two Phase ◽  
Entrance Angle

Calculation fluid dynamics software Fluent was used to conduct three-dimensional numerical simulation on gas-liquid two-phase flow field in a wet flue gas desulfurization scrubber. The k-ε model and SIMPLE computing were adopted in the analysis. The numerical simulation results show that the different gas entrance angles lead to internal changes of gas-liquid two-phase flow field, which provides references for reasonable parameter design of entrance angle in the scrubber.

Characteristic Analysis for the Internal Flow Field of CVT Torque Converter Based on FLUENT

2013 ◽  
Vol 427-429 ◽  
pp. 29-32
Author(s):  
Jin Gang Liu ◽  
Le Xiong ◽  
Yuan Qiang Tan
Keyword(s):  
Flow Field ◽  
Velocity Distribution ◽  
Channel Model ◽  
Internal Flow ◽  
Torque Converter ◽  
Characteristic Analysis ◽  
Design And Optimization ◽  
Distribution Of Flow

According to the issue of CVT torque converter internal flow field such as the complexity and not easy to calculate, the channel model of torque converter is established by UG, the grid of channel model is generated by GAMBIT, the internal flow field of torque converter is simulated based on FLUENT while the pressure and velocity distribution of flow field are calculated under three different conditions. The results show that analyzing the flow field of torque converter by FLUENT has certain guiding significance for the design and optimization of torque converter.

Research Analysis and Experiment Study on Flow Field of Hydrodynamic Coupling

2011 ◽  
Vol 418-420 ◽  
pp. 2006-2011
Author(s):  
Rui Zhang ◽  
Cheng Jian Sun ◽  
Yue Wang
Keyword(s):  
Flow Field ◽  
Cfd Simulation ◽  
Two Phase Flow ◽  
Three Dimensional ◽  
Internal Flow ◽  
Phase Flow ◽  
Complex Flow ◽  
Two Phase ◽  
Operation Conditions ◽  
Hydrodynamic Coupling

CFD simulation and PIV test technology provide effective solution for revealing the complex flow of hydrodynamic coupling’s internal flow field. Some articles reported that the combination of CFD simulation and PIV test can be used for analyzing the internal flow field of coupling, and such analysis focuses on one-phase flow. However, most internal flow field of coupling are gas-fluid two-phase flow under the real operation conditions. In order to reflect the gas-fluid two-phase flow of coupling objectively, CFD three-dimensional numerical simulation is conducted under two typical operation conditions. In addition, modern two-dimensional PIV technology is used to test the two-phase flow. This method of combining experiments and simulation presents the characteristics of the flow field when charging ratios are different.

scholarly journals Effect of Inlet Geometry on Fan Performance and Flow Field in a Half-Ducted Propeller Fan

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Pin Liu ◽  
Norimasa Shiomi ◽  
Yoichi Kinoue ◽  
Ying-zi Jin ◽  
Toshiaki Setoguchi
Keyword(s):  
Flow Field ◽  
Flow Measurement ◽  
Three Dimensional ◽  
Pressure Rise ◽  
Internal Flow ◽  
Fan Performance ◽  
Ducted Propeller ◽  
Inlet Geometry ◽  
Blade Tip ◽  
The One

In order to clarify the effect of rotor inlet geometry of half-ducted propeller fan on performance and velocity fields at rotor outlet, the experimental investigation was carried out using a hotwire anemometer. Three types of inlet geometry were tested. The first type is the one that the rotor blade tip is fully covered by a casing. The second is that the front one-third part of blade tip is opened and the rest is covered. The third is that the front two-thirds are opened and the rest is covered. Fan test and internal flow measurement at rotor outlet were conducted about three types of inlet geometry. At the internal flow measurement, a single slant hotwire probe was used and a periodical multisampling technique was adopted to obtain the three-dimensional velocity distributions. From the results of fan test, the pressure-rise characteristic drops at high flowrate region and the stall point shifts to high flowrate region, when the opened area of blade tip increases. From the results of velocity distributions at rotor outlet, the region with high axial velocity moves to radial inwards, the circumferential velocity near blade tip becomes high, and the flow field turns to radial outward, when the opened area increases.

Numerical simulation of three-dimensional airflow in a novel dual-feed rotor spinning box

2016 ◽  
Vol 88 (3) ◽  
pp. 237-253 ◽  
Author(s):  
Nicholus Tayari Akankwasa ◽  
Huiting Lin ◽  
Yuze Zhang ◽  
Jun Wang
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Three Dimensional ◽  
Internal Flow ◽  
Velocity Variation ◽  
Positive Pressure ◽  
Three Dimensional Model ◽  
Air Velocity ◽  
Rotor Spinning ◽  
Pressure Profiles

In order to regulate turbulence strength and determine airflow characteristics in a new dual-feed rotor spinning unit, the internal flow field is investigated. A computational fluid dynamics technique is employed to numerically study the three-dimensional model of the internal airflow in the new design. The effects of air velocity variation on turbulence strength, negative pressure, Re, and wall pressure distribution are investigated based on simulation data and previous studies. The results show that the turbulence strength and Re increased with increase in inlet air velocity. Pressure profiles inside the rotor varied significantly with positive pressure observed at the channel exits. Minimal inlet velocity maintains the flow field in the rotor interior below 100 m/s, which gives the ideal turbulence required to minimize yarn quality deterioration. The dual-feed rotor spinning unit showed more orderly streamline patterns with fewer vortices compared to the conventional one. The numerical simulation can provide insights on airflow studies and some guidelines for future prototyping and experiments to further improve the new design.

Sign in / Sign up

Export Citation Format

Share Document