Study on Development Strategy of University’s Architectural Design Enterprise

2010 ◽  
Vol 163-167 ◽  
pp. 3808-3811
Author(s):  
Guo Feng Du
Keyword(s):  
Development Strategy ◽  
Architectural Design ◽  
Large Scale ◽  
Strategic Plan ◽  
Developing Strategy ◽  
Healthy Development

For the sustained and healthy development of colleges architectural design company, on the basis of the analysis of strengths and weaknesses of such enterprises, we should combine the development of colleges architectural design enterprise, put forward the developing strategy of colleges architectural design enterprise, which upholds the characteristics of revitalizing the enterprise, creates the project of a joint large-scale enterprises, the role played by the students, combining production, learning and research. In this paper, the strategic plan has important guiding significance for promoting the development of architectural design company.

scholarly journals Renewable energy sources in future energy balance of the republic of Kazakhstan

2018 ◽  
Vol 58 ◽  
pp. 03006 ◽  
Author(s):  
Bekzhan Mukatov ◽  
Ravil Khabibullin
Keyword(s):  
Renewable Energy ◽  
Development Strategy ◽  
Large Scale ◽  
Renewable Energy Sources ◽  
Energy System ◽  
Energy Sources ◽  
Basic Principles ◽  
The World ◽  
Main Factors ◽  
The Republic

The article describes the main factors determining the development of renewable energy sources in the world. The assessment of the applicability of foreign RES development strategies to Kazakhstan’s energy system has been made. The main tasks facing Kazakhstan’s energy system with large-scale implementation of renewable energy were formulated. On the basis of the analysis and performed calculations recommendations and basic principles have been made on development strategy of renewable energy sources in the Republic of Kazakhstan.

scholarly journals Digital matter as interdisciplinary commodity

2017 ◽  
Vol 2 (3) ◽  
pp. 103
Author(s):  
Uwe Rieger
Keyword(s):  
Real Time ◽  
Spatial Data ◽  
Architectural Design ◽  
Large Scale ◽  
Mixed Reality ◽  
Digital Fabrication ◽  
Digital Information ◽  
Design Environment ◽  
Digital World ◽  
Starting Point

<p>With the current exponential growth in the sector of Spatial Data Technology and Mixed Reality display devises we experience an increasing overlap of the physical and digital world. Next to making data spatially visible the attempt is to connect digital information with physical properties. Over the past years a number of research institutions have been laying the ground for these developments. In contemporary architecture architectural design the dominant application of data technology is connected to graphical presentation, form finding and digital fabrication.<br />The <em>arc/sec Lab for Digital Spatial Operations </em>at the University of Auckland takes a further step. The Lab explores concepts for a new condition of buildings and urban patterns in which digital information is connected with spatial appearance and linked to material properties. The approach focuses on the step beyond digital re-presentation and digital fabrication, where data is re-connected to the multi-sensory human perceptions and physical skills. The work at the Lab is conducted in a cross disciplinary design environment and based on experiential investigations. The arc/sec Lab utilizes large-scale interactive installations as the driving vehicle for the exploration and communication of new dimensions in architectural space. The experiments are aiming to make data “touchable” and to demonstrate real time responsive environments. In parallel they are the starting point for both the development of practice oriented applications and speculation on how our cities and buildings might change in the future.<br />The article gives an overview of the current experiments being undertaken at the arc/sec Lab. It discusses how digital technologies allow for innovation between the disciplines by introducing real time adaptive behaviours to our build environment and it speculates on the type of spaces we can construct when <em>digital matter </em>is used as a new dynamic building material.</p>

BIM Technology in the Application and Development of China's Construction Industry

2014 ◽  
Vol 519-520 ◽  
pp. 1451-1454 ◽  
Author(s):  
Ya Kun Shi
Keyword(s):  
Project Management ◽  
Construction Industry ◽  
Architectural Design ◽  
Large Scale ◽  
Developed Countries ◽  
The United States ◽  
Status Quo ◽  
Point Of View ◽  
Information Modeling ◽  
Current Status

BIM technology used more widely in construction industry in developed countries in Europe and the United States, the integration of building information modeling (BIM) in the domestic large-scale propulsion was still difficult, and further the trend of widening the gap with foreign advanced level. In order to identify problems and solve the current status quo, and cut into the integrated information from project management point of view of China's architectural design, and analysis the status quo of BIM technology in our project management and developmental disabilities, and BIM-based technology and related parties mutual relations, to explain the development prospects of its application in China.

SOCIO-ECONOMIC EFFICIENCY OF AQUACULTURE DEVELOPMENT IN REPUBLICS OF DAGESTAN

Fisheries ◽  
2020 ◽  
Vol 2020 (2) ◽  
pp. 81-86
Author(s):  
Magomed Gimbatov
Keyword(s):  
Development Strategy ◽  
Rural Areas ◽  
Urban Areas ◽  
Large Scale ◽  
Economic Effect ◽  
Fish Farming ◽  
Well Being ◽  
Successful Implementation ◽  
Fish Products ◽  
The Republic

The article considers the potential of Dagestan aquaculture (with trout as case study) to increase the level of social and economic development of rural areas of the republic. An economic analysis of the prospects for the development of forestry was carried out taking into account the territorial features of the Republic of Dagestan. The study shows that the socio-economic effect of the trout farming development in Dagestan can be considered as particularly significant. Its successful implementation will accelerate the solution of the following problems of the republic: - Increase of self-sufficiency of the population, fish products of own production, with fresh and high quality; - Increased consumption of fish products per capita, especially in rural areas; - Expansion of the tax base and increase of cash receipts, in the form of taxes and other payments to the budget and extrabudgetary funds at all levels; - Creation of a significant number of new jobs in rural areas and, as a result, the reduction of rural migration to urban areas; - The revival of fish processing plants; - Increased production of environmentally friendly food products in the region. The results of the study can be used in the development of the Rural Development Strategy of the region. Sustainable and large-scale development of aquaculture (fish farming) will bring the economy of the area to a higher level and make a significant contribution to improving the well-being of the rural population of the Republic of Dagestan.

Modeling Techniques for Software-Intensive Systems

2009 ◽  
pp. 21-57 ◽  
Author(s):  
Holger Giese ◽  
Stefan Henkler ◽  
Martin Hirsch ◽  
Vladimir Rubin ◽  
Matthias Tichy
Keyword(s):  
Architectural Design ◽  
Large Scale ◽  
Organizational Structures ◽  
Physical World ◽  
Tool Support ◽  
Design Activity ◽  
Full Potential ◽  
Heterogeneous Information ◽  
Model Driven ◽  
Software Intensive

Software has become the driving force in the evolution of many systems, such as embedded systems (especially automotive applications), telecommunication systems, and large scale heterogeneous information systems. These so called software-intensive systems, are characterized by the fact that software influences the design, construction, deployment, and evolution of the whole system. Furthermore, the development of these systems often involves a multitude of disciplines. Besides the traditional engineering disciplines (e.g., control engineering, electrical engineering, and mechanical engineering) that address the hardware and its control, often the system has to be aligned with the organizational structures and workflows as addressed by business process engineering. The development artefacts of all these disciplines have to be combined and integrated in the software. Consequently, software-engineering adopts the central role for the development of these systems. The development of software-intensive systems is further complicated by the fact that future generations of software-intensive systems will become even more complex and, thus, pose a number of challenges for the software and its integration of the other disciplines. It is expected that systems become highly distributed, exhibit adaptive and anticipatory behavior, and act in highly dynamic environments interfacing with the physical world. Consequently, modeling as an essential design activity has to support not only the different disciplines but also the outlined new characteristics. Tool support for the model-driven engineering with this mix of composed models is essential to realize the full potential of software-intensive systems. In addition, modeling activities have to cover different development phases such as requirements analysis, architectural design, and detailed design. They have to support later phases such as implementation and verification and validation, as well as to systematically and efficiently develop systems.

Kenya and China's labour relations: infrastructural development for whom, by whom?

Africa ◽  
2019 ◽  
Vol 89 (4) ◽  
pp. 680-695 ◽  
Author(s):  
Anita Plummer
Keyword(s):  
Development Strategy ◽  
Large Scale ◽  
Youth Unemployment ◽  
Transport Sector ◽  
Employment Practices ◽  
Labour Relations ◽  
Construction Firms ◽  
Vision 2030 ◽  
The Government

AbstractThe Kenyan government's long-term development strategy, Vision 2030, has emphasized infrastructural investments, which it believes will lead to sustained economic growth. The government has appealed to China to fund large-scale projects in the transport sector, and as a consequence of this, construction firms from China have emerged as significant employers in the country. While the Kenyan government contends with the ongoing burden of youth unemployment, it must also reconcile the ambiguities of China's role in Africa and its implications for the labour market. This article examines two Chinese-built infrastructure projects in Kenya and their intersection with several issues involving migrant labour and local rumours of Chinese prisoners, as well as the state's vision for industrialization and youth employment. Kenyans utilize both online and interpersonal channels of discourse to critique present-day employment practices in the transport sector, and it is argued that these counter-channels of discourse represent a particular articulation of knowledge used by Kenyans to construct meaning and interpret ambiguous situations. Through a theoretical analysis of rumour, this article illustrates how ordinary Kenyans are pooling their intellectual resources to understand Sino-Kenyan labour relations in the absence of transparency and participatory government processes in the infrastructure sector.

scholarly journals Noninvasive wearable electroactive pharmaceutical monitoring for personalized therapeutics

2020 ◽  
Vol 117 (32) ◽  
pp. 19017-19025 ◽  
Author(s):  
Shuyu Lin ◽  
Wenzhuo Yu ◽  
Bo Wang ◽  
Yichao Zhao ◽  
Ke En ◽  
...  
Keyword(s):  
Development Strategy ◽  
Large Scale ◽  
Critical Role ◽  
Analytical Framework ◽  
Therapeutic Drug ◽  
Boron Doped Diamond ◽  
Redox Peak ◽  
Boron Doped ◽  
The Right ◽  
Surface Modified

To achieve the mission of personalized medicine, centering on delivering the right drug to the right patient at the right dose, therapeutic drug monitoring solutions are necessary. In that regard, wearable biosensing technologies, capable of tracking drug pharmacokinetics in noninvasively retrievable biofluids (e.g., sweat), play a critical role, because they can be deployed at a large scale to monitor the individuals’ drug transcourse profiles (semi)continuously and longitudinally. To this end, voltammetry-based sensing modalities are suitable, as in principle they can detect and quantify electroactive drugs on the basis of the target’s redox signature. However, the target’s redox signature in complex biofluid matrices can be confounded by the immediate biofouling effects and distorted/buried by the interfering voltammetric responses of endogenous electroactive species. Here, we devise a wearable voltammetric sensor development strategy—centering on engineering the molecule–surface interactions—to simultaneously mitigate biofouling and create an “undistorted potential window” within which the target drug’s voltammetric response is dominant and interference is eliminated. To inform its clinical utility, our strategy was adopted to track the temporal profile of circulating acetaminophen (a widely used analgesic and antipyretic) in saliva and sweat, using a surface-modified boron-doped diamond sensing interface (cross-validated with laboratory-based assays,R2∼ 0.94). Through integration of the engineered sensing interface within a custom-developed smartwatch, and augmentation with a dedicated analytical framework (for redox peak extraction), we realized a wearable solution to seamlessly render drug readouts with minute-level temporal resolution. Leveraging this solution, we demonstrated the pharmacokinetic correlation and significance of sweat readings.

Manufacturing Industries Transfer Trend in China 1999 - 2010

2013 ◽  
Vol 655-657 ◽  
pp. 2284-2287
Author(s):  
Lin Jiang ◽  
Wei Dou ◽  
Ya Qiong Pan
Keyword(s):  
Development Strategy ◽  
Large Scale ◽  
Manufacturing Sector ◽  
Manufacturing Industries ◽  
Industrial Transfer ◽  
Industrial Competitiveness ◽  
Western Development ◽  
The Absolute

Construction of the regional industrial competitiveness coefficient model to measure and evaluate the dynamic trend of industrial transfer between the manufacturing industries of the eastern, central and western regions since its formal implementation of the western development strategy in 1999, China, the results show that from 2000 to 2010 the absolute superiority of the eastern part of the manufacturing sector is still obvious, even to expand, and the East Midwest gap has not narrowed, as well as the expansion of large-scale industrial transfer and did not happen.

GUIDELINES FOR REUSING ONTOLOGIES ON THE SEMANTIC WEB

2010 ◽  
Vol 04 (02) ◽  
pp. 239-283 ◽  
Author(s):  
ELENA SIMPERL
Keyword(s):  
Semantic Web ◽  
Development Strategy ◽  
Large Scale ◽  
Point Of View ◽  
Ontology Development ◽  
The Poor ◽  
Ontology Reuse ◽  
The Impact ◽  
Do So

The ability to efficiently and effectively reuse ontologies is commonly acknowledged to play a crucial role in the large scale dissemination of ontologies and ontology-driven technology, being thus a pre-requisite for the ongoing realization of the Semantic Web. In this article, we give an account of ontology reuse from a process point of view. We present a methodology that can be utilized to systematize and monitor ontology engineering processes in scenarios reusing available ontological knowledge in the context of a particular application. Notably, and by contrast to existing approaches in this field, our aim is to provide means to overcome the poor reusability of existing resources — rather than to solve the more general issue of building new, more reusable knowledge components. To do so we investigate the impact of the application context of an ontology — in terms of tasks this ontology has been created for and will be utilized in — has on the feasibility of a reuse-oriented ontology development strategy and provide guidelines that take these aspects into account. The applicability of the methodology is demonstrated through a case study performed in collaboration with an international eRecruitment solution provider.

Sign in / Sign up

Export Citation Format

Share Document