The Acoustic Insulation Property of a New Non-Woven Material

2011 ◽  
Vol 194-196 ◽  
pp. 471-475 ◽  
Author(s):  
Jin Jing Chen ◽  
Zheng Guo
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Nonwoven Material ◽  
Sound Absorption Coefficient ◽  
Flame Resistance ◽  
Hydrophobic Property ◽  
Insulation Property ◽  
Acoustic Insulation ◽  
High Sound ◽  
Different Thickness

The acoustic insulation and hydrophobic properties of a new non-woven material were analyzed and discussed in this paper. The new non-woven material absorbs sound energy to transfer into heat energy by friction between viscosity of air near fiber and fiber. The acoustic insulation properties of the new non-woven material, polyurethane foam and felt were measured. With the same thickness and half weight of felt, the sound absorption coefficient of non-woven was 20~30% higher than felt. Further more, with the same weight of felt, the sound absorption coefficient of non-woven was50~60% higher than felt. However, the sound absorption coefficients of non-woven materials with different thickness and weight were also discussed. The amount of the sound absorption coefficient gradient increased with the increase of thickness and frequency. Comparing the existing sound absorption materials, the new non-woven material has high sound absorption, light weight, hydrophobic property, workability, and flame resistance property. The non-woven material can improved thermal insulation and sound absorption by combining conventional non-woven with aluminum evaporated film.So the new nonwoven material has been widely applied in industries to reduce noises, especially in the car.

scholarly journals Experimental Sound Absorption of Several Loose Uncooked Granular Materials

2019 ◽  
Vol 9 (1) ◽  
pp. 4578-4583
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Grain Shape ◽  
Experimental Tests ◽  
Sound Absorption Coefficient ◽  
Acoustic Absorption ◽  
Low Frequencies ◽  
Acoustic Insulation ◽  
Acoustic Absorption Coefficient ◽  
First Time

Absorbent materials it's an acoustic solution that can be used to control the reverberation time (RT) in deferent spaces as: conference rooms, in halls, theaters, cinema.... and also, it can be used in walls or ceilings of buildings to improve the acoustic insulation Which can be used for internal separations between spaces. This study focuses on the experimental study of the acoustic absorption coefficient of several granular food materials as a function of frequency 50 to 1600 Hz. All acoustic absorption tests performed in this study are performed by an acoustic impedance tube or Kundt tube. And to the knowledge of the author it is the first time in the literature that someone studies the acoustic behavior of this kind of materials. Several parameters were studied such as the effect of thickness on the sound absorption coefficient of the materials tested, like the influence of the grain form on the acoustic absorption by the introduction of a new parameter L / D, and finally the influence of density and type of material on the sound absorption coefficient. The objective of this work is to study the influence of the grain shape on the sound absorption coefficient, and that's why we have chosen these fifteen materials each one with its own shape. The results of these experimental tests show that when the sample thickness rises, the acoustic absorption coefficient rises too with a shift from resonance frequency to low frequencies. When the L/D parameter rises, the absorption behavior increases too in all frequencies mentioned. Finally, as the density of the tested material rises, the percentage of sound absorption of the materials also rises

Preparation and Sound Absorption Coefficient Test of Aluminum Foam with CaO Granules Infiltrating Agent

2018 ◽  
Vol 933 ◽  
pp. 55-60
Author(s):  
Yong Zhang ◽  
Zong Min Chen ◽  
Zhao Jun Wang ◽  
Jing Hui Liu
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Aluminum Foam ◽  
Low Frequency ◽  
Processing Parameters ◽  
Sound Absorption Coefficient ◽  
Pressure Infiltration ◽  
Pure Alcohol ◽  
Infiltration Pressure ◽  
High Sound

Three kinds of aluminum foam of different pore sizes were prepared with a tailor-made low-pressure infiltration device. CaO granules in three sizes (0.45~0.71mm,0.71~090mm and 1.25~1.60mm) were selected as infiltrating agents. The processing parameters were as follows: granules preheat temperature of 700 °C,infiltration pressure of 0.04 MPa and aluminum liquid temperature of 720 °C. In order to improve the removal performance and porosity, mixture of CaO powder of finer than 300 mesh and pure alcohol was mixed uniformly with granules, which made the slurry-coating granules conformal contacts rather than point contacts as in the traditional infiltration method. The testing results show that among all aluminum foam specimens tested with transfer function methods, two kinds have high sound absorption coefficient in low frequency (250~1600Hz).

scholarly journals Enhancing egg cartons’ sound absorption coefficient with recycled materials

2017 ◽  
Vol 24 (2) ◽  
pp. 115-131 ◽  
Author(s):  
Prasasto Satwiko ◽  
Verza Dillano Gharata ◽  
Herybert Setyabudi ◽  
Fefen Suhedi
Keyword(s):  
Absorption Coefficient ◽  
Noise Reduction ◽  
Sound Absorption ◽  
Noise Source ◽  
Absorption Measurement ◽  
Sound Absorption Coefficient ◽  
Recycled Materials ◽  
Human Voice ◽  
Reduction Coefficient ◽  
High Sound

Egg cartons have popularly been used as sound absorbers because they are inexpensive, easy to install and easily available. However, acoustic experts have demonstrated that egg cartons are bad sound absorbers. This study developed Enhanced Egg Carton – Dry and Enhanced Egg Carton – Wet using additional recycled materials (shredded rice straw paper, textile waste, 2-cm cut rice straws) to improve the cartons’ sound absorption coefficient while retaining their original advantages. Enhanced Egg Carton – Dry and Enhanced Egg Carton – Wet were tested based on the ASTM C423-02 method of sound absorption measurement. Enhanced Egg Carton – Dry has a noise reduction coefficient of 0.6 and a sound absorption average of 0.59, while Enhanced Egg Carton – Wet has a noise reduction coefficient of 0.54 and sound absorption average of 0.54. The maximum sound absorption coefficients of Enhanced Egg Carton – Dry and Enhanced Egg Carton – Wet are, respectively, 0.77 at 500 Hz and 0.67 at 630 Hz. Enhanced Egg Carton – Dry has a sound absorption coefficient ⩾0.5, between 315 and 2500 Hz, which makes it able to absorb sound energy of the lower to upper mid-range frequencies. With their high sound absorptivity at mid-range frequencies, Enhanced Egg Carton – Dry and Enhanced Egg Carton – Wet are suitable for mosques and auditoriums, where the human voice is the dominant noise source and where an inexpensive sound absorber is needed. The production of Enhanced Egg Carton – Dry and Enhanced Egg Carton – Wet is so simple that users can do it themselves using basic home tools.

scholarly journals Acoustic Panels Made of Paper Sludge and Clay Composites

2021 ◽  
Vol 13 (2) ◽  
pp. 637
Author(s):  
Tomas Astrauskas ◽  
Tomas Januševičius ◽  
Raimondas Grubliauskas
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Composite Panel ◽  
Sound Absorption Coefficient ◽  
Core Material ◽  
Paper Sludge ◽  
Frequency Range ◽  
Absorption Properties ◽  
Air Gaps ◽  
The Core

Studies on recycled materials emerged during recent years. This paper investigates samples’ sound absorption properties for panels fabricated of a mixture of paper sludge (PS) and clay mixture. PS was the core material. The sound absorption was measured. We also consider the influence of an air gap between panels and rigid backing. Different air gaps (50, 100, 150, 200 mm) simulate existing acoustic panel systems. Finally, the PS and clay composite panel sound absorption coefficients are compared to those for a typical commercial absorptive ceiling panel. The average sound absorption coefficient of PS-clay composite panels (αavg. in the frequency range from 250 to 1600 Hz) was up to 0.55. The resulting average sound absorption coefficient of panels made of recycled (but unfinished) materials is even somewhat higher than for the finished commercial (finished) acoustic panel (αavg. = 0.51).

scholarly journals Air permeability and sound absorption coefficient changes from ultrasonic treatment in a cross section of Malas (Homalium foetidum)

2021 ◽  
Vol 67 (1) ◽  
Author(s):  
Chun-Won Kang ◽  
Eun-Suk Jang ◽  
Nam-Ho Lee ◽  
Sang-Sik Jang ◽  
Min Lee
Keyword(s):  
Absorption Coefficient ◽  
Ultrasonic Treatment ◽  
Sound Absorption ◽  
Gas Permeability ◽  
Treated Wood ◽  
Untreated Wood ◽  
Sound Absorption Coefficient ◽  
Permeability Constant ◽  
Average Value ◽  
Permeability Increase

AbstractWe investigated the effect of ultrasonic treatment on Malas (Homalium foetidum) gas permeability and sound absorption coefficient using the transfer function method. Results showed a longitudinal average Darcy permeability constant of 2.02 (standard deviation SD 0.72) for untreated wood and 6.15 (SD 3.07) for ultrasound-treated wood, a permeability increase of 3.04 times. We also determined the average sound absorption coefficients in the range of 50 to 6.4 kHz and NRC (noise reduction coefficient: average value of sound absorption coefficient value at 250, 500, 1000, and 2000 Hz) of untreated Malas. Those values were 0.23 (SD 0.02) and 0.13 (SD 0.01), respectively, while those of ultrasonic-treated Malas were 0.28 (SD 0.02) and 0.14 (SD 0.02), a 19.74% increase in average sound absorption coefficient.

Research of Possibilities of Using the Recycled Materials Based on Rubber and Textiles Combined with Vermiculite Material in the Area of ​​Noise Reduction

2014 ◽  
Vol 1001 ◽  
pp. 171-176 ◽  
Author(s):  
Pavol Liptai ◽  
Marek Moravec ◽  
Miroslav Badida
Keyword(s):  
Absorption Coefficient ◽  
Standing Wave ◽  
Sound Pressure Level ◽  
Sound Absorption ◽  
Sound Pressure ◽  
Sound Level ◽  
Pressure Level ◽  
Sound Absorption Coefficient ◽  
Physical Parameters ◽  
Materials Research

This paper describes possibilities in the use of recycled rubber granules and textile materials combined with vermiculite panel. The aim of the research is the application of materials that will be absorbing or reflecting sound energy. This objective is based on fundamental physical principles of materials research and acoustics. Method of measurement of sound absorption coefficient is based on the principle of standing wave in the impedance tube. With a sound level meter is measured maximum and minimum sound pressure level of standing wave. From the maximum and minimum sound pressure level of standing wave is calculated sound absorption coefficient αn, which can take values from 0 to 1. Determination of the sound absorption coefficient has been set in 1/3 octave band and in the frequency range from 50 Hz to 2000 Hz. In conclusion are proposed possibilities of application of these materials in terms of their mechanical and physical parameters.

scholarly journals Study on the sound absorption behavior of multi-component polyester nonwovens: experimental and numerical methods

2018 ◽  
Vol 89 (16) ◽  
pp. 3342-3361 ◽  
Author(s):  
Tao Yang ◽  
Ferina Saati ◽  
Kirill V Horoshenkov ◽  
Xiaoman Xiong ◽  
Kai Yang ◽  
...  
Keyword(s):  
Numerical Methods ◽  
Absorption Coefficient ◽  
Empirical Model ◽  
Surface Impedance ◽  
Sound Absorption ◽  
Low Frequency ◽  
Accurate Method ◽  
Small Error ◽  
Sound Absorption Coefficient ◽  
Acoustical Properties

This study presents an investigation of the acoustical properties of multi-component polyester nonwovens with experimental and numerical methods. Fifteen types of nonwoven samples made with staple, hollow and bi-component polyester fibers were chosen to carry out this study. The AFD300 AcoustiFlow device was employed to measure airflow resistivity. Several models were grouped in theoretical and empirical model categories and used to predict the airflow resistivity. A simple empirical model based on fiber diameter and fabric bulk density was obtained through the power-fitting method. The difference between measured and predicted airflow resistivity was analyzed. The surface impedance and sound absorption coefficient were determined by using a 45 mm Materiacustica impedance tube. Some widely used impedance models were used to predict the acoustical properties. A comparison between measured and predicted values was carried out to determine the most accurate model for multi-component polyester nonwovens. The results show that one of the Tarnow model provides the closest prediction to the measured value, with an error of 12%. The proposed power-fitted empirical model exhibits a very small error of 6.8%. It is shown that the Delany–Bazley and Miki models can accurately predict surface impedance of multi-component polyester nonwovens, but the Komatsu model is less accurate, especially at the low-frequency range. The results indicate that the Miki model is the most accurate method to predict the sound absorption coefficient, with a mean error of 8.39%.

Sign in / Sign up

Export Citation Format

Share Document