Dynamic Mechanical Property of a Steel

2011 ◽  
Vol 197-198 ◽  
pp. 1681-1685
Author(s):  
Jun Lin Tao ◽  
Wei Fang Xu ◽  
Gang Cheng ◽  
Xi Cheng Huang ◽  
Fang Ju Zhang ◽  
...  
Keyword(s):  
Mechanical Property ◽  
Flow Stress ◽  
Strain Rate ◽  
Failure Strain ◽  
Mechanical Tests ◽  
Dynamic Mechanical Property ◽  
Constitutive Relationship ◽  
Stress Strain ◽  
Dynamic Tension ◽  
Dynamic Mechanical

In order to realize the dynamic mechanical property of a steel, the quasic-static and dynamic compressive and tensile mechanical tests of a steel are carried out. Based on the stress-strain curves of the steel, the constitutive relation is presented and it can be used to describe compressive and tensile mechanical property correspondently. The stress-strain curves at different strain rate and the obtained dynamic constitutive relationship show that the flow stress of the steel is increased with strain rate increased. The dynamic tension experimental results show that failure strain and stress of the steel are increased small with strain rate increased, and the fracture of tension sample is ductile fracture.

Study on the Dynamic Mechanical Property of High Strength Steel 18NiC250

2014 ◽  
Vol 644-650 ◽  
pp. 4763-4765
Author(s):  
Xiao Jun Shao ◽  
Peng Ke Liu ◽  
Zhi Yin Zeng ◽  
Wei Guo Guo
Keyword(s):  
Mechanical Property ◽  
Constitutive Model ◽  
Strain Rate ◽  
High Strength Steel ◽  
High Strength ◽  
Dynamic Mechanical Property ◽  
Hopkinson Pressure Bar ◽  
Dynamic Mechanical ◽  
Pressure Bar

In this paper, dynamic mechanical property tests under different tempreture and strain rate of high strength steel 18NiC250 are conducted by means of Hopkinson pressure bar technique. The results of tests show 18NiC250 steel is not only very sensitive on strain rate, but also sensitive to temperature. The rate relative constitutive model of this steel is obtained and well predicts dynamic mechanical property after yielded.

scholarly journals Experimental Study on Dynamic Mechanical Property of Cemented Tailings Backfill by SHPB

2018 ◽  
Author(s):  
Yu ye TAN ◽  
Xin YU ◽  
Lin hui XU ◽  
Wei dong SONG
Keyword(s):  
Mechanical Property ◽  
Compressive Strength ◽  
Strain Rate ◽  
Dynamic Loading ◽  
High Speed ◽  
Underground Mining ◽  
Dynamic Mechanical Property ◽  
Deep Mining ◽  
Dynamic Mechanical ◽  
Dynamic Compressive Strength

In recent years, cemented tailings/paste backfill (CPB) become more and more important to maintain mine structure and keep mining stope to be stable in deep underground mining. Deep mining process often accompanied by blasting, rock burst and other high-speed dynamic loading. So it’s important to make research on dynamic behavior and characteristics of CPB. In this paper, a series of dynamic loading tests on CPB specimens by SHPB were taken to study the characteristic of stress-strain, dynamic strength, deformation and failure of CPB. The experimental results revealed that some CPB specimens have 1~2 lower stress peaks after reaching the peak stress before getting completely failed. The greater the cement-sand ratio was, the more obvious of strain reaction was. This property mainly showed like follows. The greater the cement-sand ratio was, the greater the dynamic compressive strength was under similar velocity impact; the dynamic compressive strength and the average strain rate were quadratic equation relationship, and the greater the cement-sand ratio was, the higher increase rate of dynamic compressive strength caused by strain rate. The dynamic compressive strength enhancement factor increased with the increase of the strain rate, and is larger than that of rock samples. The failure forms of CPB specimens under low-speed impact were almost the same as them under static uniaxial and triaxle compression. The CPB specimens were crushed broken under the critical strain rate, similar to the failure mode of low strength concrete. The experimental research results will improve our understanding the dynamic mechanical property of CPB and help to guide the strength design of deep mining backfill.

Study on Dynamic Mechanical Response of TC21 Alloy

2011 ◽  
Vol 88-89 ◽  
pp. 674-678
Author(s):  
Shuang Zan Zhao ◽  
Xing Wang Cheng ◽  
Fu Chi Wang
Keyword(s):  
Flow Stress ◽  
High Strain Rate ◽  
Strain Rate ◽  
Strain Hardening ◽  
High Strain ◽  
Dynamic Flow ◽  
Dynamic Mechanical ◽  
Hardening Effect ◽  
High Strain Rate Deformation ◽  
Binary Morphology

Some results of an experimental study on high strain rate deformation of TC21 alloy are discussed in this paper. Cylindrical specimens of the TC21 alloys both in binary morphology and solution and aging morphology were subjected to high strain rate deformation by direct impact using a Split Hopkinson Pressure Bar. The deformation process is dominated by both thermal softening effect and strain hardening effect under high strain rate loading. Thus the flow stress doesn’t increase with strain rate at the strain hardening stage, while the increase is obvious under qusi-static compression. Under high strain rate, the dynamic flow stress is higher than that under quasi-static and dynamic flow stress increase with the increase of the strain rate, which indicates the strain rate hardening effect is great in TC21 alloy. The microstructure affects the dynamic mechanical properties of TC21 titanium alloy obviously. Under high strain rate, the solution and aging morphology has higher dynamic flow stress while the binary morphology has better plasticity and less prone to be instability under high strain rate condition. Shear bands were found both in the solution and aging morphology and the binary morphology.

scholarly journals Study on Dynamic Mechanical Properties and Constitutive Model Construction of TC18 Titanium Alloy

Metals ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 44 ◽  
Author(s):  
Changming Zhang ◽  
Anle Mu ◽  
Yun Wang ◽  
Hui Zhang
Keyword(s):  
Mechanical Properties ◽  
Titanium Alloy ◽  
Flow Stress ◽  
Yield Strength ◽  
Constitutive Model ◽  
Testing Machine ◽  
Dynamic Mechanical Properties ◽  
Stress Strain ◽  
Dynamic Mechanical ◽  
Different Temperatures

In order to investigate the static and dynamic mechanical properties of TC18 titanium alloy, the quasi-static stress–strain curve of TC18 titanium alloy under room temperature was obtained by DNS 100 electronic universal testing machine (Changchun Institute of Mechanical Science Co., Ltd., Changchun, China). Meanwhile, the flow stress–strain curves under different temperatures and strain rates are analyzed by split Hopkinson pressure bar (SHPB) device with synchronous assembly system. On the basis of the two experimental data, the JC constitutive model under the combined action of high temperature and impact load is established using the linear least squares method. The results show the following: the yield strength and flow stress of TC18 titanium alloy increase slowly with the increase of the strain rate, and the strain value corresponding to the yield strength is reduced. With the increase of strain, the flow stress increases at first and then decreases at different temperatures. The strain value corresponding to the transition point rises with the temperature increase, and the corresponding stress value remains basically unchanged. With the increase of experimental temperature, the flow stress shows a downward trend, and the JC constitutive model can predict the plastic flow stress well.

scholarly journals Constitutive Relationship for Hot Deformation of TB18 Titanium Alloy

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Qiang Fu ◽  
Wuhua Yuan ◽  
Wei Xiang
Keyword(s):  
Titanium Alloy ◽  
Flow Stress ◽  
Dynamic Recrystallization ◽  
Strain Rate ◽  
Hot Deformation ◽  
Flow Behavior ◽  
Peak Stress ◽  
Constitutive Relationship ◽  
Flow Localization ◽  
Phase Zone

In the present work, the hot deformation behavior of TB18 titanium alloy was investigated by isothermal hot compression tests with temperatures from 650 to 880°C and strain rates from 0.001 to 10 s−1. The flow curves after friction and temperature correction show that the peak stress decreased with the temperature increase and the strain rate decrease. Three typical characteristics of flow behavior indicate the dynamic softening behavior during hot deformation. At a strain rate of 0.001∼0.01 s−1, the flow stress continues to decrease as the strain rate increases after the flow stress reaches the peak stress; the flow softening mechanism is dynamic recovery and dynamic recrystallization at a lower temperature and dynamic recrystallization at a higher temperature. The discontinuous yielding phenomenon could be seen at a strain rate of 1 s−1, dynamic recrystallization took place in the β single-phase zone, and flow localization bands were observed in the α + β two-phase zone. At a higher strain rate of 10 s−1, the flow instabilities were referred to as the occurrence of flow localization by adiabatic heat. Constitutive equation considering the compensation of strain was also established, and the results show high accuracy to predict the flow stress with the correlation coefficient of 99.2% and the AARE of 6.1%, respectively.

Sign in / Sign up

Export Citation Format

Share Document